Database Develop

HELP with bricked device honor 4x che2-l12

i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you

Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Can you boot into bootloader ?
You may change your recovery to the origine one then flash a new ROM

Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
What's the status of your phone?

If you can acces fastboot mode it's ok

Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
If you can enter fastboot mode and download official ROM pack, then you are all good.
Method:
http://forum.xda-developers.com/showpost.php?p=68695798&postcount=2

I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me

kamrangul87 said:
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
Click to expand...
Click to collapse
Fastboot method most probably is your only choice now.
Follow this method here:
https://forum.xda-developers.com/showpost.php?p=68695798&postcount=2

Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Reboot to recovery wit volume up + power button trigger . and then click on reboot button and then select reboot to bootloader. Their you flash system.img , boot.img and cust.img to their partitions. And then reboot . if u understand what I said I will help u further .

A little bit of help needed...
Hi,
I basically did the same mistake as the other guys, unlocked the bootloader and installed twrp, all fine. Then I ***** up by trying to root fellowing a tuto made for the non-Che2-L11 ones.
I have no problem going into TWRP, the bootloader, or the black screen from huawei (witch looks like.. some kind of second recovery ?)
I managed to download the stock software from huawei ( Honor 4X Firmware (Che2-L11, Android5.1.1, EMUI3.1, C636B360, Malaysia)S.zip ) and also managed to download a version of HuaweiUpdateExtractor ( 0.9.9.5 ).
My problem now, is that if I understood correctly, I should extract the image files from the APP from the firmware zip I downloaded from Huawei.
Unfortunatly, there is no HuaweiUpdateExtractor profile for the honor 4x Che2-L11.
There I may need assistance, or guidance.
Does the profile already exists somewhere ?
How can I create my own, is it not too complex ?
Maybe someone already extracted thoses files and could make them available somewhere ?
Or maybe is there any other way to unbrick my phone ?
************************************
EDIT: Nevermind. I managed to extract the files without profiles. I flashed them 3 but nothing really changed.. So.. I'm kinda stuck. no Idea from here.
************************************
************************************
EDIT (of the edit) : Nevermind the previous nevermind ! It actually worked ! Well, kinda.. Seems my new "stock rom" is quite buggy, strangly, but nevertheless, it work Thanks
************************************
Thanks a lot.

Hello
Hello friend, i also have the same problem. My huawei honor 4x che2-l11 stuck on huawei logo i can not unbrick it. if you succsed so plz attach the file you extract to my email plzzzzz.
email: [email protected]
Thanks.

[TWRP][3.0.2][Unofficial] for Huawei P8 [GRA-L09]

TWRP 3.0.2
Huawei P8 GRA-L09​
Fully working recovery, no encryption support.
"No touch at boot" bug is solved.
Battery percentage.
Compiled with stock B370 kernel
(encryption support is still a WIP)
Since I hope to get it "Official" :angel:, I won't post the customized one here: have a look at @nexolight 's CM13 thread for that one.
No need to say you need an unlocked bootloader.
There's a lot of good guides on how to flash a recovery so I won't repeat here
Download:
https://www.androidfilehost.com/?fid=385035244224399403
MD5: 717f2219fef142a8b4713839186a32f7
Sources:
https://github.com/AD2076/android_device_huawei_grace
Credits:
Team Win for their amazing project
Thank to:
@nexolight (again!) cause she made me start develop in the custom roms universe

anyone could help here?
It was my fault: didn't had the phone for a couple of months and now wanted to update to the latest version of TWRP, ROM and didn't read the threads completely . First time that I'm so stupid.
Bootloader is unlocked, think I have the old bootloader. Had TWRP 2.8.7.0 installed and working. Flashed a 6.0 ROM and ended with bootloop...OK related to the old TWRP. So flashed within 2.8.7 the TWRP 3.0.2 ...
now it is only showing Huawei boot logo....neither fastboot nor TWRP is working anymore with (Vol+ & Power button). It just simply is showing the Huawei logo for some seconds and then restarting.
Any chance to unbrick it?

I'm not expert but if you can't get even into bootloader I think your phone is done.

Hitchi said:
anyone could help here?
It was my fault: didn't had the phone for a couple of months and now wanted to update to the latest version of TWRP, ROM and didn't read the threads completely . First time that I'm so stupid.
Bootloader is unlocked, think I have the old bootloader. Had TWRP 2.8.7.0 installed and working. Flashed a 6.0 ROM and ended with bootloop...OK related to the old TWRP. So flashed within 2.8.7 the TWRP 3.0.2 ...
now it is only showing Huawei boot logo....neither fastboot nor TWRP is working anymore with (Vol+ & Power button). It just simply is showing the Huawei logo for some seconds and then restarting.
Any chance to unbrick it?
Click to expand...
Click to collapse
Try booting with Vol- pressed while connected to PC

Even with Holding VOl- by connecting the PC the phone simply restarts to the Huawei logo and then restarts...

Is there still that bug where I'd have to wait for the screen to go off?
Or what does no touch at boot mean?

No, there isn't. The "notouchatboot" bug is solved..

AD2076 said:
No, there isn't. The "notouchatboot" bug is solved..
Click to expand...
Click to collapse
Great! Nice job

I cannot clean cache. Ext4 formatting takes forever. What am I doing wrong?

potworny said:
I cannot clean cache. Ext4 formatting takes forever. What am I doing wrong?
Click to expand...
Click to collapse
Actually it takes long, very long. Wait with patience

Unfortunately, after some time again, I have no touch at the start ;(
Wysłane z mojego Huawei P8 przy użyciu Tapatalka

motshek said:
Unfortunately, after some time again, I have no touch at the start ;(
Wysłane z mojego Huawei P8 przy użyciu Tapatalka
Click to expand...
Click to collapse
Did you flashed a new kernel? Kept vol+ button pressed while booting into recovery?

Ive loaded only new twrp. a week was ok and now I have to wait until the phone is in sleep recovery and then running touch

motshek said:
Ive loaded only new twrp. a week was ok and now I have to wait until the phone is in sleep recovery and then running touch
Click to expand...
Click to collapse
Sounds strange... I am using it with no issues.
Did you tried flashing twrp again?
Btw I am gonna upload a new build (just removes some unneeded stuff).

Not working for me either. No touch at boot at all but when the screen goes off, I can use it again! Just flashed today.

T1mb3 said:
Not working for me either. No touch at boot at all but when the screen goes off, I can use it again! Just flashed today.
Click to expand...
Click to collapse
Can you give me some more details?
Rom version?
Custom kernel?
Did you had a bugged twrp installed before flashing?
Did you keep Vol + pressed until splash screen at first recovery boot after flashing?
Thank you

AD2076 said:
Can you give me some more details?
Rom version?
Custom kernel?
Did you had a bugged twrp installed before flashing?
Did you keep Vol + pressed until splash screen at first recovery boot after flashing?
Thank you
Click to expand...
Click to collapse
I just updated to b382 with normal OTA. (I flashed the stock recovery as I previously had the older TWRP installed.)
I have never flashed custom kernels on this device.
The earlier TWRP (I quess 2.8, new_twrp) was working normally
Let me know if you need more info!

T1mb3 said:
I just updated to b382 with normal OTA. (I flashed the stock recovery as I previously had the older TWRP installed.)
I have never flashed custom kernels on this device.
The earlier TWRP (I quess 2.8, new_twrp) was working normally
Let me know if you need more info!
Click to expand...
Click to collapse
I have the very same version installed and no touch bug. The recovery is compiled with proper options to avoid it.
I am gonna upload a new build asap. I'll pm you to test it, can I?

Is it possible to use this TWRP to install original Huawei ROMs?

AD2076 said:
I have the very same version installed and no touch bug. The recovery is compiled with proper options to avoid it.
I am gonna upload a new build asap. I'll pm you to test it, can I?
Click to expand...
Click to collapse
Sure!

my honor 4x che1-L04 suddenly stop working

my honor 4x che1-l04 syddenly stop working when i press the power button it shows honor logo and went off also i never flash any custom recovery also only acessable option is fastboot&rescue mode
my boot loader is locked but i managed to get boot loader key from honor care
after that i unlock boot loader and flash the phone from fastboot mode but it didnt work at all
all files mean recovery,boot,system.img flashed properly no issue but it didnt worked
last version of my phone is marshmallow build no is Che1-L04C675B520
please help me

gilmaan azmi said:
my honor 4x che1-l04 syddenly stop working when i press the power button it shows honor logo and went off also i never flash any custom recovery also only acessable option is fastboot&rescue mode
my boot loader is locked but i managed to get boot loader key from honor care
after that i unlock boot loader and flash the phone from fastboot mode but it didnt work at all
all files mean recovery,boot,system.img flashed properly no issue but it didnt worked
last version of my phone is marshmallow build no is Che1-L04C675B520
please help me
Click to expand...
Click to collapse
Do you have the marshmallow update pacakage(one you downloaded to update the phone to marshmallow) if you have then extract it and place the dload folder inside a memory card and place it in your phone, then while switched off press power+volume up+volume down all at once and wait until your phone vibrates then leave the buttons and let the software do the work. Hope it helps:good:

SumitGupta2442 said:
Do you have the marshmallow update pacakage(one you downloaded to update the phone to marshmallow) if you have then extract it and place the dload folder inside a memory card and place it in your phone, then while switched off press power+volume up+volume down all at once and wait until your phone vibrates then leave the buttons and let the software do the work. Hope it helps:good:
Click to expand...
Click to collapse
i did it brother but it didn't work
only one thing in my phone work is fastboot and rescue mode i also use dc phoenix it also didn't help me at all
dc phoenix show me that it need che1-l04 b126 stock Rom which i didn't find anywhere also on official site

gilmaan azmi said:
i did it brother but it didn't work
only one thing in my phone work is fastboot and rescue mode i also use dc phoenix it also didn't help me at all
dc phoenix show me that it need che1-l04 b126 stock Rom which i didn't find anywhere also on official site
Click to expand...
Click to collapse
Download it from here http://download-c.huawei.com/download/downloadCenter?downloadId=53693&version=167605&siteCode=in. Btw I have no idea what dc phoenix is.

gilmaan azmi said:
i did it brother but it didn't work
only one thing in my phone work is fastboot and rescue mode i also use dc phoenix it also didn't help me at all
dc phoenix show me that it need che1-l04 b126 stock Rom which i didn't find anywhere also on official site
Click to expand...
Click to collapse
If you have unlocked bootloader just flash twrp version for your device and download any MM version Fullrom.zip using firmware finder and flash it through twrp.
Before flashing new rom wipe all partitions from twrp.

miststudent2011 said:
If you have unlocked bootloader just flash twrp version for your device and download any MM version Fullrom.zip using firmware finder and flash it through twrp.
Before flashing new rom wipe all partitions from twrp.
Click to expand...
Click to collapse
i unlocked the boot loader also flashed the twrp recovery
but its not booting in twrp recovery both by power button + volume up and through fastboot command

gilmaan azmi said:
i unlocked the boot loader also flashed the twrp recovery
but its not booting in twrp recovery both by power button + volume up and through fastboot command
Click to expand...
Click to collapse
May be you are using wrong version twrp.

miststudent2011 said:
May be you are using wrong version twrp.
Click to expand...
Click to collapse
i am using TWRP_3.0.3-0_N_cherry its for honor 4x

gilmaan azmi said:
i am using TWRP_3.0.3-0_N_cherry its for honor 4x
Click to expand...
Click to collapse
Then try this process first flash stock recovery and then use dload method and check whether it recovers or not.

miststudent2011 said:
Then try this process first flash stock recovery and then use dload method and check whether it recovers or not.
Click to expand...
Click to collapse
i did it but dosent work
i also use the huawei multi tool it also dosent worked
one thing i noticed that when i flash cust file it shows failed : remote(command not allowed )
also cache is not wiping through fastboot mode it shows the same failed : remote(command not allowed )
i think its a soft brick situation because it boot in fastboot and rescue mode also it show honor logo and went off
i dont know what to do i flashed every single official rom from b161 to b520
and also flashed twrp it also didnt work
please help me

gilmaan azmi said:
i did it but dosent work
i also use the huawei multi tool it also dosent worked
one thing i noticed that when i flash cust file it shows failed : remote(command not allowed )
also cache is not wiping through fastboot mode it shows the same failed : remote(command not allowed )
i think its a soft brick situation because it boot in fastboot and rescue mode also it show honor logo and went off
i dont know what to do i flashed every single official rom from b161 to b520
and also flashed twrp it also didnt work
please help me
Click to expand...
Click to collapse
Just only flash stock recovery not all images and try dload.
You can't flash cust with fastboot and also you can't wipe cache with fastboot

miststudent2011 said:
Just only flash stock recovery not all images and try dload.
You can't flash cust with fastboot and also you can't wipe cache with fastboot
Click to expand...
Click to collapse
i flashed stock recovery but it dosent boot in recovery mode
also it tried dload method but dosent work
what is the reason, that the phone flashed recovery properly but not booting in recovery mode

gilmaan azmi said:
i flashed stock recovery but it dosent boot in recovery mode
also it tried dload method but dosent work
what is the reason, that the phone flashed recovery properly but not booting in recovery mode
Click to expand...
Click to collapse
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.

miststudent2011 said:
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.
Click to expand...
Click to collapse
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i am flashing the same but didnt work

miststudent2011 said:
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.[/Q
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i flashed the same but it didnt work
dont know what i am donig wrong
every procedure i followed is correct
Click to expand...
Click to collapse

miststudent2011 said:
Are you flashing the ROM version which you were before bricking your device.
What is the android version you were before.
Click to expand...
Click to collapse
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i am flashing the same but it didnt work
dont know where i am going wrong

gilmaan azmi said:
yes last version of my phone is marshmallow build no is Che1-L04C675B520
and i am flashing the same but it didnt work
dont know where i am going wrong
Click to expand...
Click to collapse
There was a similar case which I helped him to solve the issue but dont remember the build number that helped him.
Check my previous posts you can find the guide and build number.

miststudent2011 said:
There was a similar case which I helped him to solve the issue but dont remember the build number that helped him.
Check my previous posts you can find the guide and build number.
Click to expand...
Click to collapse
which post sir

same issue
I'm facing exactly same issue, Any help welcome.

gilmaan azmi said:
which post sir
Click to expand...
Click to collapse
did ur issue get fixed? please post updates.

Huawei P smart TWRP 3.2.1-0 EMUI 8.0 New update 05.06.2018

Huawei P smart TWRP 3.2.1-0 EMUI 8.0​FIG-LX1
Features:
Decryption DATA = works
• MTP and OTG = working
• Backup and Recovery = works
Note:
If you ask for a password to decrypt data
pin-code or password (it's worth it) to enter the screen you need to enter.
fastboot flash recovery_ramdisk twrp_p_smart.img
Автор: @Pretoriano80 XDA
@Pretoriano80 XDA
New TWRP 05.06.2018
fixed mounting problems, I corrected it (added images for firmware, including and here, added sections for wipe and backup).
Download New 05.06.2018
https://drive.google.com/file/d/1U68vtVbVwf4y1EELlOigLS6Wemc0A_P6/view?usp=drivesdk
Download
Stock recovery
https://drive.google.com/file/d/1dFFjCG2xeg9E08SZFA7jC9y21iX1sJgD/view?usp=drivesdk
Installation instructions for twrp
Preliminarily you must enable the factory unlock and unlock the loader.
ADB P SMART is allocated to the disk C better than one files with the image twrp, then start the search in Windows, the command line open from the administrator, then enter the command, but the phone must be in fastboot on the switched off phone, press the volume swing - and connect the cable install drivers, then on the command line write fastboot flash recovery_ramdisk twrp_p_smart.img Enter wait as all the settings, fastboot reboot. Reboot to the system there by clicking the volume swing + should get into TWRP.
DOWNLOAD ADB TWRP
https://drive.google.com/file/d/1GDUfPmDPf6Rp1o0dwdNoSeUC74JZGCiy/view?usp=drivesdk[\HIDE]
DOWNLOAD DRIVERS
[url]https://yadi.sk/d/YTsmimThu5nNK[/url][\HIDE]

Is this the same twrp a reported by ChinHon here?
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705

andymore said:
Is this the same twrp a reported by ChinHon here?
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705
Click to expand...
Click to collapse
This is a new, updated Recovery TWRP, not as if it's not about ChinHon it. Here, almost everything works, except for the erecovery section.

andymore said:
Is this the same twrp a reported by ChinHon here?
Click to expand...
Click to collapse
This is a new, updated Recovery TWRP, not as if it's not about ChinHon it. Here, almost everything works, except for the erecovery section.

Are there any issues performing wipes / factory resets with this version?

mwarner said:
Are there any issues performing wipes / factory resets with this version?
Click to expand...
Click to collapse
Problems were not observed, reset settings, formatting is working.

with the old Twrp from ChincHon I had many problems FCs but with these I have no problems with AoKP and Ressurection Remix super finally a useful Recovery Thank you for that

Dude, THANK YOU. Every other guide I read for installing TWRP on the P Smart just said to run fastboot flash recovery <filename> and it never worked. Following your instructions has gotten the recovery installed.
Saying that though; I've booted into recovery and all I've got is TWRP splash page. Anyone else had that issue?

noobstyle1337 said:
with the old Twrp from ChincHon I had many problems FCs but with these I have no problems with AoKP and Ressurection Remix super finally a useful Recovery Thank you for that
Click to expand...
Click to collapse
Not at all, if any problems write to me.

Trism said:
Dude, THANK YOU. Every other guide I read for installing TWRP on the P Smart just said to run fastboot flash recovery <filename> and it never worked. Following your instructions has gotten the recovery installed.
Saying that though; I've booted into recovery and all I've got is TWRP splash page. Anyone else had that issue?
Click to expand...
Click to collapse
You put on the official firmware p smart? With the modified kernel, there are some problems with the twrp input.

mak6021 said:
You put on the official firmware p smart? With the modified kernel, there are some problems with the twrp input.
Click to expand...
Click to collapse
Ah, good point. I installed AOSP 8.1 first, then installed TWRP. Any advice on what I can do to get around this? Is there a different version of TWRP I could try?

Trism said:
Ah, good point. I installed AOSP 8.1 first, then installed TWRP. Any advice on what I can do to get around this? Is there a different version of TWRP I could try?
Click to expand...
Click to collapse
I updated twrp in the post look at the beginning of the second link to download. Maybe it will do
.Try in erecovery to install twrp

where do i find the stock recovery if i want to restore it ???
where do i find the stock recovery for the p smart fig la1 if i want to restore it ???

ilyes9999 said:
where do i find the stock recovery for the p smart fig la1 if i want to restore it ???
Click to expand...
Click to collapse
Download
Stock recovery
https://drive.google.com/file/d/1dFFjCG2xeg9E08SZFA7jC9y21iX1sJgD/view?usp=drivesdk
[/QUOTE]

with Resurrection Remix everything works best no Fcs everything top only load lasts 4 hours

fig la1 ?
does it work for fig la1

noobstyle1337 said:
with Resurrection Remix everything works best no Fcs everything top only load lasts 4 hours
Click to expand...
Click to collapse
Honestly I do not know what this download is 4 hours is not very good.
And where to download Resurrection Remix for Huawei P Smart or enjoy 7s?

ilyes9999 said:
does it work for fig la1
Click to expand...
Click to collapse
Yes it works.

mak6021 said:
Honestly I do not know what this download is 4 hours is not very good.
And where to download Resurrection Remix for Huawei P Smart or enjoy 7s?
Click to expand...
Click to collapse
Oh sorry for my Bad english ..Batterie loading is 4 hours it is a bit slow

test assembly, it is possible to solve some problems.
If something does not work, write here.
Download.
https://drive.google.com/file/d/1PSbZCc6UdelMag56kTKVebpajItGtWnM/view?usp=drivesdk

Can't boot to twrp

Device: eva-l09
Software: EMUI 5, Android 7.0
Kernel: 4.1.18-gd97adb9
Build: EVA-L09C432B386
I flashed the newest twrp and when I reboot the device to recovery it hangs on the "device is booting" screen and it freezes.
I tried flashing twrp to recovery2 too but that did not help (I can't even boot back to huawei's eRecovery).
I can't update with OTA because it gets softbricked if I do.
Please help.

Have you unlocked the bootloader?

Kr3Ep said:
Device: eva-l09
Software: EMUI 5, Android 7.0
Kernel: 4.1.18-gd97adb9
Build: EVA-L09C432B386
I flashed the newest twrp and when I reboot the device to recovery it hangs on the "device is booting" screen and it freezes.
I tried flashing twrp to recovery2 too but that did not help (I can't even boot back to huawei's eRecovery).
I can't update with OTA because it gets softbricked if I do.
Please help.
Click to expand...
Click to collapse
What does it mean 'newest TWRP' - are you flashing the proper TWRP as ported to Huawei P9 Nougat?
Find the 'newest' in this post:
https://forum.xda-developers.com/showpost.php?p=75787111&postcount=1
With the wrong TWRP (not supporting encryption etc), you may brick the phone

rupiec/ said:
Have you unlocked the bootloader?
Click to expand...
Click to collapse
I did

zgfg said:
What does it mean 'newest TWRP' - are you flashing the proper TWRP as ported to Huawei P9 Nougat?
Find the 'newest' in this post:
https://forum.xda-developers.com/showpost.php?p=75787111&postcount=1
With the wrong TWRP (not supporting encryption etc), you may brick the phone
Click to expand...
Click to collapse
I flashed this one. It's weird because I can still access Huawei's recovery. Isn't it supposed to overwrite it?

Kr3Ep said:
I flashed this one. It's weird because I can still access Huawei's recovery. Isn't it supposed to overwrite it?
Click to expand...
Click to collapse
Do you know the trick that you must, and how, to boot to TWRP immediately after flashing, otherwise you loose TWRP
https://forum.xda-developers.com/p9...rainbow-v4-t3759292/post77622126#post77622126

zgfg said:
Do you know the trick that you must, and how, to boot to TWRP immediately after flashing, otherwise you loose TWRP
https://forum.xda-developers.com/p9...rainbow-v4-t3759292/post77622126#post77622126
Click to expand...
Click to collapse
Thank you but it got solved by the correct twrp. Thought that the latest zip on twrp's official site would be the correct one, but no.

zgfg said:
What does it mean 'newest TWRP' - are you flashing the proper TWRP as ported to Huawei P9 Nougat?
Find the 'newest' in this post:
https://forum.xda-developers.com/showpost.php?p=75787111&postcount=1
With the wrong TWRP (not supporting encryption etc), you may brick the phone
Click to expand...
Click to collapse
Thanks, it worked. How can it be that the zip on the official twrp site doesn't work?

Kr3Ep said:
Thanks, it worked. How can it be that the zip on the official twrp site doesn't work?
Click to expand...
Click to collapse
There are different TWRPs for Huawei for Android 6, 7 and 8
Who knows what they have
there (maybe for M), but search on XDA to find what and how will work (eg, there is also TWRP for O but not supporting encryption/decryption, hence unable to access Data partition and Internal mem)

zgfg said:
There are different TWRPs for Huawei for Android 6, 7 and 8
Who knows what they have
there (maybe for M), but search on XDA to find what and how will work (eg, there is also TWRP for O but not supporting encryption/decryption, hence unable to access Data partition and Internal mem)
Click to expand...
Click to collapse
Ohh thanks!