Database Develop

Touchscreen sometimes doesn't react for 1 or 2 seconds.

First of all.. I tried every single combinations of roms. From GB to ics. From custom kernel,rom,recovery to originals. Different kinds of original firmwares. It always happens. My device is 13 month old but I lost the bill. So Samsung won't repair it.
The problem is that every minute or two or three the touchscreen doesn't respond for a second and sometimes just a part of the touchscreen react. It's really annoying when I am chatting. While I wrote this it happened 3 times. Any suggestions or ideas to lead me in the right way?
Gesendet von meinem GT-I9001 mit Tapatalk 2

Then it must be a hardware problem -> service? Dont you have any big/deep scratches on the digitizer? Have your SGS been disassembled before?

No dissambling no scratches. Just normal mini scratches that you see if you hold it against strong light
Gesendet von meinem GT-I9001 mit Tapatalk 2

It's definitely a hardware problem. Maybe a bad contact from touchscreen to circuit board.

Somone do know the rights that i have for warranty? Because my Device is 13 month old and its not stolen (I can prove it by letting the police check its IMEI S/N) and every newer device got a 24 month warranty. i got the original package and everything. i only lost the bill because of house moving. Its Samsung Germany. In their terms they say, they need the bill. But come on its a paper, you could easily loose it. I know it is my fault, but i really take care of such things. Everyone moved their house one time and know what could happen to things
If somone got a clue it would be nice, otherwise: my fault..**** happens..sell on ebay as broken....save money for some month... buy new device :crying:
edit: btw.... its has official launched in July 2011, so it can't be 24 month old

a gentle bump. gentle and quiet... just how u like it :silly:

USB cap worned out, anyone else has this?

I've noticed recently an issue with my Xperia Z USB port cover cap. It is showing signs of being damaged.
At first, it feels lose and dosn't have that strong closing any more. And recently it started not to close well and shows a bump, not flat with the surface. I always knew this would happen because of all the plug in and out of the charger/microUSB cable.
I wonder if any of you guys has experienced this with the USB or other port's caps. The phone is on warranty so I'm thinking, since this is a waterproof phone, that it should be fixed by Sony. Now I wonder if they will consider this a defect or bad use of the device and charge me for the repair.
What's your experience on this?

I can only confirm that I have the exact same issue.
Sent from my C6603 using xda app-developers app

Mine went a week or so ago, got phone A month after launch.
Sent from my C6603 using XDA Premium 4 mobile app

i have the same issue the robber in it was plugged from it's place will go visit sony service center soon maybe i can a new usb port cover

Yep the same issue.
I fixed it myself
Gesendet von meinem C6603 mit Tapatalk
---------- Post added at 10:16 PM ---------- Previous post was at 10:13 PM ----------
smash_07 said:
I've noticed recently an issue with my Xperia Z USB port cover cap. It is showing signs of being damaged.
At first, it feels lose and dosn't have that strong closing any more. And recently it started not to close well and shows a bump, not flat with the surface. I always knew this would happen because of all the plug in and out of the charger/microUSB cable.
I wonder if any of you guys has experienced this with the USB or other port's caps. The phone is on warranty so I'm thinking, since this is a waterproof phone, that it should be fixed by Sony. Now I wonder if they will consider this a defect or bad use of the device and charge me for the repair.
What's your experience on this?
Click to expand...
Click to collapse
It's easy to fix if you do it right.
I can describe how i did it if you want.
All you need is sensite feeling and a new usb cap from a website, i got mine from amazon.
Gesendet von meinem C6603 mit Tapatalk

smash_07 said:
I've noticed recently an issue with my Xperia Z USB port cover cap. It is showing signs of being damaged.
At first, it feels lose and dosn't have that strong closing any more. And recently it started not to close well and shows a bump, not flat with the surface. I always knew this would happen because of all the plug in and out of the charger/microUSB cable.
I wonder if any of you guys has experienced this with the USB or other port's caps. The phone is on warranty so I'm thinking, since this is a waterproof phone, that it should be fixed by Sony. Now I wonder if they will consider this a defect or bad use of the device and charge me for the repair.
What's your experience on this?
Click to expand...
Click to collapse
Thats the reason i bought a dock station 3 months after i got my Z. Its a good solution for home

AlexR29 said:
Thats the reason i bought a dock station 3 months after i got my Z. Its a good solution for home
Click to expand...
Click to collapse
I got a dock too but had to change cups before that :thumbdown:
Gesendet von meinem C6603 mit Tapatalk

Tommy-Geenexus said:
Yep the same issue.
I fixed it myself
Gesendet von meinem C6603 mit Tapatalk
---------- Post added at 10:16 PM ---------- Previous post was at 10:13 PM ----------
It's easy to fix if you do it right.
I can describe how i did it if you want.
All you need is sensite feeling and a new usb cap from a website, i got mine from amazon.
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
So how did you fix it? I can find a new cap easily. Even though I have warranty to fix this by Sony I would like to know your procedure.

smash_07 said:
So how did you fix it? I can find a new cap easily. Even though I have warranty to fix this by Sony I would like to know your procedure.
Click to expand...
Click to collapse
Ok the only hard thing is to get the cap out of the phone.
You need to go in the small hole over the gap with something thin and stable, then you need to push the cap down and while doing this you need to carefully pull it out. There is a barb at the end which shouldn't get stuck in the phone, so don't pull too much.
It can take a bit up to 15 min but it's worth it. There's no need to sent it in repair becoz the phone's away 2 weeks then.
The input of the new cap is easy and goes itself.
Gesendet von meinem C6603 mit Tapatalk

AlexR29 said:
Thats the reason i bought a dock station 3 months after i got my Z. Its a good solution for home
Click to expand...
Click to collapse
I ordered my XZ the launch week along with the dock... In fact I received the dock before the phone. I also use Airdroid to transfer content to my phone for convenience reasons mainly. So, my usb flap has been opened like 20 times maximum to do some flashtool sessions or emergency charges out of home, and it still closes and feels like brand new.
Definitely after reading threads like this I feel buying the dock was a very, very good idea.

No problem here I have been using both dock and usb since i bought the phone 8 month ago and the cap is still flat.

can you please a youtube video of this procedure??

Shaggerholics said:
can you please a youtube video of this procedure??
Click to expand...
Click to collapse
You need no vid. Just try it it isn't hard.
Sent from my white Xperia™Z

Tommy-Geenexus said:
Ok the only hard thing is to get the cap out of the phone.
You need to go in the small hole over the gap with something thin and stable, then you need to push the cap down and while doing this you need to carefully pull it out. There is a barb at the end which shouldn't get stuck in the phone, so don't pull too much.
It can take a bit up to 15 min but it's worth it. There's no need to sent it in repair becoz the phone's away 2 weeks then.
The input of the new cap is easy and goes itself.
Gesendet von meinem C6603 mit Tapatalk
Click to expand...
Click to collapse
So I have to make a hook with cooper or wire to pull old flap out? And then just insert new one in?

sipe1 said:
So I have to make a hook with cooper or wire to pull old flap out? And then just insert new one in?
Click to expand...
Click to collapse
Normally you don't need anything, you only need to pull carefully.
The thing is you need to know how the flap is build, the barb shows up.
You may need to find out yourself how to do it best.
Sent from my white Xperia™Z

I've got a set on order and will let everyone know how I did it. I was thinking that a thin sewing pin down the hole on the side the barb was on might do it, if I feel too nervous just pulling, thinking it might snap off.

Please provide step by step pictures! ?
?

Mobe1969 said:
I've got a set on order and will let everyone know how I did it. I was thinking that a thin sewing pin down the hole on the side the barb was on might do it, if I feel too nervous just pulling, thinking it might snap off.
Click to expand...
Click to collapse
Thank you! Post pictures of new flap to see how to get it out. And if you can take picture of every step.

I did try but im scared to go the distance please i have got my replacement flaps........so please can you post a video or the tool you used ??? if video please help with pictures....

Ifixit might have a teardown video. Go check.
Sent from my C6603 using xda app-developers app

Display doesnt work but touch do!

Well, this is my first thread, if i got this in the wrong section, im really really sorry!
Like the title says, my display isnt working like it should, i can use the touch (even play music and stuff) but i cant see anything, do i need to buy a new display? If so, i searched for it and its selling like one piece, display and touch, and i dont know if im going to get scammed with the "repair" in a local store and just re-connect the display or something like that, i wanna know before i take the xperia to that place, a quick help guys! :good: :silly:
And again, im really sorry if i screwed this forum with a misplaced thread
(It got wet, then i just left it in the car with a ziploc filled with rice for a week, and powered it on, everything works but the display the soul of the xperia :/ )
Thanks for reading!

http://forum.xda-developers.com/showthread.php?t=2776003
I had the same problem too bro, but let me tell you taht your display is fine don´t spend your money buying a new one, i tried mine with another cellphone i bought just like mine and the display was good then i send it to repair and the guy told me that one of the five cristals of que mother board that gives the video signal was burned and that´s easy to fix but the problem is to find the spare, it´s a very tiny piece and the only solution i see is to find a damaged tx and take that cristal to repair mine, while that happens i´m using the one i bought is just the same and newer but i would like to repair the other one to sell it and recover some money you know.

daniel090588 said:
http://forum.xda-developers.com/showthread.php?t=2776003
I had the same problem too bro, but let me tell you taht your display is fine don´t spend your money buying a new one, i tried mine with another cellphone i bought just like mine and the display was good then i send it to repair and the guy told me that one of the five cristals of que mother board that gives the video signal was burned and that´s easy to fix but the problem is to find the spare, it´s a very tiny piece and the only solution i see is to find a damaged tx and take that cristal to repair mine, while that happens i´m using the one i bought is just the same and newer but i would like to repair the other one to sell it and recover some money you know.
Click to expand...
Click to collapse
So its a little piece from the motherboard?! ): i was thinking that only a display-related stuff, not a tiny cristal from the motherboard ): that means everythibg in my Xperia v is going to get lost? ): the store told me that the fix of a new display is $600 in my country, (like 45-50 usd) but i wanna open it by myself and rebuild it from scratch, the thing is that i dont know how and i dont have the tiny screwdrivers xD
So, your advice? Remember, its a xperia v (lt25i)

AlfreedoS said:
So its a little piece from the motherboard?! ): i was thinking that only a display-related stuff, not a tiny cristal from the motherboard ): that means everythibg in my Xperia v is going to get lost? ): the store told me that the fix of a new display is $600 in my country, (like 45-50 usd) but i wanna open it by myself and rebuild it from scratch, the thing is that i dont know how and i dont have the tiny screwdrivers xD
So, your advice? Remember, its a xperia v (lt25i)
Click to expand...
Click to collapse
Well you didn´t say that it was a v, but i guess that is the same problem but is wear cause v is water resistant unlike my tx, my advice y that you try out the display on another cellphone in my case the display wasn´t damaged so don´tspend your money without knowing well what´s wrong

Xda members, please help! share your experience if you had a similar or the same problem with your xperia v, i wanna fix it, im using a crappy phone while the other one is in a necessary vacation :crying:
Help a bro, and a bro will help you too :good: :laugh:

Chargingport problem

Hello!
I own the P9 since several month, but my usb-c calbe suddendly started to get loose and fell out very easy (but charged like normal) , so I bought 2 new one Amazon, with the same issue. A friend of mine also got the P9 with the same problem.
So my question is, is it the charging port or the cheap cables? I know how to change the port, but before I will do that I want to know if someone has the same problems as me? :/

I've never had an issue with mine regardless of which cable I use. I would say it is the port. Only a guess though.
Sent from my SM-G950F using Tapatalk

MattMc1977 said:
I've never had an issue with mine regardless of which cable I use. I would say it is the port. Only a guess though.
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
Well it is also my guess too, but also a friend of mine has the same problem.. that is the thing that confuses me the most.. can u try something for me? Can u possibly put the usb-c connector into your phone and shake it a litte bit on the calbe, does it fall of? (Please try this on your bed or on somewhere where your phone can t get damaged )
Cause mine always falls from the connector.. my phone must lie down on a flat surface, without any shaking.
Do u even know a good company where i can buy a replecement parts? (German/Austria)

Just had a quick try for you. Whilst there is a bit of movement up and down on the port it doesn't come loose. When I put in any cable there is a bit of a click that keeps it secure. As for parts, I would give eBay a try.
Sent from my SM-G950F using Tapatalk

Thank you very much!
Well I could manage to finde some, but I don't know, if I can trust the sellers.
With shipping I found one for about 21€ , du you think it is too much?
On Amazon I also found one for about 15€, but there is no one who can tell me if it is really the right one. :/
I know how it should look like, but i don not know the difference in the sice (P9lite & P9+).
What would you do?

With eBay I tend not to purchase off anyone that has less than 95% feedback. Can't say if that is expensive or not unfortunately. I would take the one from Amazon with it being cheaper, just go off the reviews on Amazon. I don't think there is any difference with the charging port between the different models.
Sent from my SM-G950F using Tapatalk

In my phone the USB-C Cabel falls out to, but only sometimes. Other times it sits rock solid. I think it could be independent from phone to phone. You could try cleaning it with air if there is dust inside.

Well on Amazon there are no reviews for this product. :/
Unfortuately I really don't trust ebay.
My cable falls out with every single move. If I'm lying on my bed, watching some movies -> it falls out really easy wihtout touching or shaking the device. :/
The real hard question is.. is it the port or the cable. Once i got a calbe from a company called "Anker" it cost about 10€ and it was fitting perfect. (Unfortunately my dog killed it )
I guess I ll buy a new one from the same company and will try it, if not.. well then i have to open my phone anyway.
So guys, thanks for your great support, have a nice time!

PCB Board Changed now no Signal

Hey Guys,
I changed my PCB Board today, (Loudspeaker did Not Work, Notifcation LED was also Dead).
but now i dont get any GSM/LTE Signal (WiFi works) did any one Know how to check the Signal Strength? or did i Miss Something? never changed such a thing before .. the Antenna Cable should be connected correctly.
Gesendet von meinem POCOPHONE F1 mit Tapatalk

How did you change the PCB? Got it changed from the service center or did it yourself? If you did it yourself , where did you obtain the PCB. Seems like your IMEI is missing , restore IMEI and it should work.

did it self, no warranty.
the PCB have i buyed at AliExpress, 5 USD with Shipping..
how can i restore the IMEI? never did this before.

you clearly dont know what youre talking about. You changed the board thats on the lower part of the phone, yet you implied that you changed the motherboard.
Your imei isnt lost, dont worry about that. Check the antenna cables, theyre pretty hard to get off and on the connectors, especially for someone whos doing it for the first time (they should snap in with a lot of force). If that doesnt work then the board that you changed is bad. I have bought many parts of off aliexpress, but not a single charging/antenna/speaker board has ever worked for me.

yes, ok, I do not know much about that. That's why I asked here.
If someone tells me that my IMEI has been lost by the exchange, I assume that this answer is probably correct.
As I said after the exchange, everything works, except for mobile. WiFi, Bluetooth, etc. works
I then built it back on that old PCB and my mobile network is back, but there notification LED stopped working and the lower/Button speaker is without function.
Gesendet von meinem POCOPHONE F1 mit Tapatalk