Related
Did a search on the forum but didn't find any precise answer about it.
I've bought a Spigen Oleophobic Coated Tempered Glass Glas.tR SLIM for my Nexus 5X and I'm thinking about also buying a slim case for it.
I like the Google Adopted Slim Case very much.
Do you guys know if they are 100% compatible?
I don't want to get either of those damaged.
I don't know if this will help but I have a generic tempered glass protector from xtremeguard and the regular adopted case and they work together just fine. The lip of the adopted case is very flexible, so it can fit over the screen protector without pushing it up (I don't know if the same is true of the adopted slim case).
You'll be fine using that combo. The adopted case is just a flexible tpu and will sit just fine with a tempered glass screen protector. I've used one with a different screen protector, but it was glass. The ones with built in screen protectors are usually the problematic cases.
I've sent a mail to Spigen support asking about compatibility but unfortunately they cannot guarantee that for a tihrd party product (the Adopted Slim case).
I think it may happen the same thing asking Google, but I'll try.
I have them together and it's been a wonderful experience!
ViRb3 said:
I have them together and it's been a wonderful experience!
Click to expand...
Click to collapse
That's what I've wanted to hear, amazing!
I'm ordering the Slim case right away then
I do not like Spigen.Since I bought one for my Nexus 6p,it broke when it arrived.So I found another brand iPely great on Amazon.
Reporting here that I have had both the Adopted Slim Case and the Spigen Slim Glass on my 5X for two weeks more or less and I have to say they go along with each other very very well.
The tempered glass arrived earlier than the protective case; applying it was super easy and I had no bubbles at all when I was done with it.
The case is very good too, fits the phone very well and does not add much bulk. Just a little, but I'm fine with it. It has to provide some protection after all.
With the combination of the two only one small problem arised: when I put the Adopted case on, two little bubbles have appeared, fortunately not on the screen (one on the top left corner and the other on the bottom left corner of the device), As soon as I remove the case, they disappear.
So I think the case applies some pressure on the glass and cause it to lift a bit, hence the problem.
However ,as I said, I was very lucky they are in the edge of the 5X and not on its screen and they are very hard to notice.
A part from this little issue, I'm satisfied.
I've looked over the threads and they seem to be older for when the phone first came out. I cant seem to find a definitive answer for a case that fits tempered glass without popping up the edges. Any suggestions.
There are plenty of updates if you check through the tempered glass screen protector thread. The last 10 pages or so are the most current info.
The real answer to your question is "it depends." The cases that do work typically have such a slim margin that manufacturing variation can cause it to work fine for one person and not for another. I have a Cover-Ups Explorer wood back case and it fit with both of the TGSP I tried, but it was very close. Right now I'm using the Supcase Unicorn Beetle Pro with my Amazingthing TGSP. This case is similar to an otterbox in construction as it is two pieces and the front goes over the screen and then you put the back on. This prevents it from lifting the corners. It is a tight fit though.
appreciate it
Oneplus 3 is a beautiful device and we all know to protect screen we need to apply a Tempered Glass. So my first TG for OP3 was Orzly. I know some of you dont prefer is due to dot matrix grid / rainbow affect. But for me it was not a problem. Also if you are unhappy with Orzly there is always Ultimate Shield TG which also a full screen TG. Problem with full screen TGs are most of them doesn't support cases specially hybrid cases. After buying some well known case, i've always found that they dont fit well with full screen TGs. But i've found cheap but really high quality Chinese hybrid case which fit well with full screen TGs :fingers-crossed::fingers-crossed:. So in this thread i will share which cases does support and which doesn't. You guys always welcome to post same thing to help other.. Which supports and which doesn't..
Support
Screen : Orzly Tempered Glass / Ultimate Shield Tempered Glass
Link : http://orzly.com/orzlyr-3d-pro-fit-glass-screen-protector-for-oneplus-3.html
Ultimateshield OnePlus 3 (Black) Tempered Glass Screen Protector
Link : http://www.ultimateshield.co.uk/oneplus-3-black-tempered-glass-screen-protector/
Case: Heavy Duty Armor Shield Hard Shockproof Protector Cover Case
Link : http://www.ebay.com/itm/391504331329?_trksid=p2057872.m2749.l2649&var=660669915743&ssPageName=STRK%3AMEBIDX%3AIT
Doesn't Support
Screen : Same as above
Case :
Soft TPU Silicon Matte Comfortable Protective Back Case
Link : http://www.ebay.com/itm/162115108195?_trksid=p2057872.m2749.l2649&var=461076476670&ssPageName=STRK%3AMEBIDX%3AIT
TUDIA Slim-Fit HEAVY DUTY MERGE Dual Layer Cover Case
Link : http://www.ebay.com/itm/252423838358?_trksid=p2057872.m2749.l2649&var=551276210946&ssPageName=STRK%3AMEBIDX%3AIT
Spigen®「Rugged Armor」Carbon Fiber Texutred Protective Case
Link : http://www.ebay.com/itm/252469306570?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
crazykas said:
Oneplus 3 is a beautiful device and we all know to protect screen we need to apply a Tempered Glass. So my first TG for OP3 was Orzly. I know some of you dont prefer is due to dot matrix grid / rainbow affect. But for me it was not a problem. Also if you are unhappy with Orzly there is always Ultimate Shield TG which also a full screen TG. Problem with full screen TGs are most of them doesn't support cases specially hybrid cases. After buying some well known case, i've always found that they dont fit well with full screen TGs. But i've found cheap but really high quality Chinese hybrid case which fit well with full screen TGs :fingers-crossed::fingers-crossed:. So in this thread i will share which cases does support and which doesn't. You guys always welcome to post same thing to help other.. Which supports and which doesn't..
Support
Screen : Orzly Tempered Glass / Ultimate Shield Tempered Glass
Link : http://orzly.com/orzlyr-3d-pro-fit-glass-screen-protector-for-oneplus-3.html
Ultimateshield OnePlus 3 (Black) Tempered Glass Screen Protector
Link : http://www.ultimateshield.co.uk/oneplus-3-black-tempered-glass-screen-protector/
Case: Heavy Duty Armor Shield Hard Shockproof Protector Cover Case
Link : http://www.ebay.com/itm/391504331329?_trksid=p2057872.m2749.l2649&var=660669915743&ssPageName=STRK%3AMEBIDX%3AIT
Doesn't Support
Screen : Same as above
Case :
Soft TPU Silicon Matte Comfortable Protective Back Case
Link : http://www.ebay.com/itm/162115108195?_trksid=p2057872.m2749.l2649&var=461076476670&ssPageName=STRK%3AMEBIDX%3AIT
TUDIA Slim-Fit HEAVY DUTY MERGE Dual Layer Cover Case
Link : http://www.ebay.com/itm/252423838358?_trksid=p2057872.m2749.l2649&var=551276210946&ssPageName=STRK%3AMEBIDX%3AIT
Spigen®「Rugged Armor」Carbon Fiber Texutred Protective Case
Link : http://www.ebay.com/itm/252469306570?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Click to expand...
Click to collapse
Orzly Tempered Glass + Heavy Duty Armor Shield Hard Shockproof Protector Cover Case : really great protection. Thanks for this really useful post, I avoided unnecessary purchases thanks to you !
Orzly TGSP works fine with Tudia Merge case.
I am using it for a month now, no problems.
berbecverde said:
Orzly TGSP works fine with Tudia Merge case.
I am using it for a month now, no problems.
Click to expand...
Click to collapse
No buddy it doesn't fit well in all corner..Thatz the problem
Yes buddy it does fit. I guess you just have to know hot to put your case on.
Take a look.
Everything is fine at the corners. The case is over the glass on every corner.
Edit:
Not trying to start a fight or anything, just maybe some people want to buy this case and by reading your post they will avoid
the Tudia Merge case, a good case by the way, with lots of colors to cheer you up.
And i have to mention that once you know how to, you can take it off and put it back in under one minute.
I'm with crazykas on this one. I thought i had my merge over the tg but with a lot of in and out of pockets it finally popped off.
Sent from my ONEPLUS A3000 using Tapatalk
annoyingly orzly flexi case + orzly tgsp = a load of crap, the case pops the screen of,f how did they not take into account the two products being used together, very disappointing.
Just bought orzly tgs and orzly bumper case. Not 100% compatible but if you pay a lot of attention you can manage to put the cover over the glass. Have particular attention to the corner.
I will test it in the next days..
Orzly® - OnePlus 3 - Fusion Bumper Cover per Oneplus 3 / OnePlus THREE ( 2016 ) - Cover con Tecnologia di Assorbimento Urto - NERA https://www.amazon.it/dp/B01HBLS85Y/ref=cm_sw_r_cp_apa_DucXxbSS4EB8N
I really like the Spigen Rugged Armorr Case - https://www.amazon.com/gp/product/B01H3PEWDK/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=A2SFKRF5TPZMT5
But i'm worried the tempered glass i want to get won't go well with it. The Yootech one. - https://www.amazon.com/gp/product/B01KC1TFKC/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3KGQHS00G2MDY
Should i just go for a regular screen protector since the case already has some leap in front. Like the ArmorSuit one - https://www.amazon.com/gp/product/B01H85Q8V4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3LQSX85N730QN
Need to order them soon too. Replies would be appreciated.
I think that for example if want to use the orzly grip or the tudia merge case, one other solution would be using a TGSP that does not cover the entire screen, like the first Nilkkin TGSP.So were the case ends the Screen protector will begin.
Just a theory.
stanley08 said:
I really like the Spigen Rugged Armorr Case - https://www.amazon.com/gp/product/B01H3PEWDK/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=A2SFKRF5TPZMT5
But i'm worried the tempered glass i want to get won't go well with it. The Yootech one. - https://www.amazon.com/gp/product/B01KC1TFKC/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3KGQHS00G2MDY
Should i just go for a regular screen protector since the case already has some leap in front. Like the ArmorSuit one - https://www.amazon.com/gp/product/B01H85Q8V4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3LQSX85N730QN
Need to order them soon too. Replies would be appreciated.
Click to expand...
Click to collapse
I tried the Pleson TGSP, it was craaaaap. Didn't fully adhere to the screen at the top-left corner, I could feel the little gap between it and the screen when I touched it. Just as bad, it partially blocked the front-facing camera....I haven't seen a well-reviewed TGSP for the OP3 yet, at least none that didn't seem like they weren't bought from the company selling the protectors "in exchange for an unbiased review"
I went with the IQ Shield, and while I don't know that it would fare as well as tempered glass in something like a fall or direct impact to the screen, it's plenty scratch resistant for my needs (I keep it in my front pocket), goes on very easily, doesn't feel like it's going to come off unless I really try/want it to, and fits great with the Spigen Rugged Armor case I've got. The IQ Shield and the ArmorSuit look a lot a like in terms of the design and what they're intended for (scratch resistance vs. shatter resistance you'd find with a TGSP.)
Regarding the case, I've got both the Rugged Armor and the Neo Hybrid, and I like the Neo Hybrid just a little bit better. It feels a tiny bit more durable than the Rugged Armor, I think owing to the plastic bumper around the edge of the phone/case. It's not the Slim Armor that I had with my Nexus 5 in terms of rigidity, but either one should do you just fine if you like Spigen products. I'll probably end up switching back and forth periodically between the two, anyway.
Joshmccullough said:
I tried the Pleson TGSP, it was craaaaap. Didn't fully adhere to the screen at the top-left corner, I could feel the little gap between it and the screen when I touched it. Just as bad, it partially blocked the front-facing camera....I haven't seen a well-reviewed TGSP for the OP3 yet, at least none that didn't seem like they weren't bought from the company selling the protectors "in exchange for an unbiased review"
I went with the IQ Shield, and while I don't know that it would fare as well as tempered glass in something like a fall or direct impact to the screen, it's plenty scratch resistant for my needs (I keep it in my front pocket), goes on very easily, doesn't feel like it's going to come off unless I really try/want it to, and fits great with the Spigen Rugged Armor case I've got.
Click to expand...
Click to collapse
Wow. Thanks alot for this man. I'll send you a PM and see if i can get some pictures from you. I need to order in the next 1 or 2 hours to have it delivered quickly with Amazon Prime.
This one? - https://www.amazon.com/OnePlus-Prot...472498142&sr=8-1&keywords=IQ+Shield+oneplus+3
I think if not getting a TG, it makes more sense to get the Neo Hybrid instead of the Rugged Armor?
Is there a cover full transparent supported by the orzly tempered glass?
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
As I bought and still use an Orzly tempered glass protector I concur with your analysis at this time. When I first applied the Orzly is was perfect without the issues some experienced but after 3+ weeks the sides must have lifted slightly due to my bumper case and dust particles got underneath next to the left/right buttons. Since then I've been religiously looking for an alternate that passes the case test but none so far have come to light.
I like the feel of the tempered glass so much that I've resisting going back to the film/plastic alternatives which I had always used in the past. I'm even considering going naked on the screen, relying on Gorilla Glass 5, but continue with a bumper case. Or the reverse, by using an Orzly but with no bumper case as I already have a dBrand skin applied. None of those options seem all that appealing. The one protector that seems to work with a 2.5D screen is the Galaxy 8's Whitestone Dome Glass but it's a crazy expensive $41USD and difficult to apply. I'm not sure even if a OnePlus 5 version was available I'd spend that much money.
I haven't had any luck with any tempered glass., due to point 2 which has been raised:
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
Click to expand...
Click to collapse
After reading all of the reviews I decided just to leave the plastic one on until someone gets their act together and offers a proper tgsp for the OP5
Sent from my OnePlus5 using XDA Labs
Agreed with OP and all of above. I had and still have the Orzly TG protector on, but dust underneath. I want to go back to the usual plastic ones, but don't know which one covers as well/much as the original one that came with the phone. Any recommendations?
Sent from my ONEPLUS A5000 using Tapatalk
Im still waiting for my Nilkin glass protector to arrive (it's almost been a month, sigh)
If this one has the same issue as the ones I've tried before it (lack of adhesive around the edges), I'm going to try and go back to using plastic screen protectors.
I don't want to use my device without one, but I also hate how these glass protectors don't fully adhere to the screen around the sides (including top and bottom)
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Megaflop666 said:
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Click to expand...
Click to collapse
Can anybody confirm this?
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
graja84 said:
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
Click to expand...
Click to collapse
The YouTube channel you mention is also my favorite choice for screen protector info for the Oneplus 5. He always tests the protectors with various cases. His branding of the channel can get annoying but his market coverage is excellent and vast. With the plethora of tempered screen protectors its your choice for an accompanying case that often makes a big difference in your satisfaction. Here is the Big unBox - Biuzko review.
One thing I noticed is when the Big unBox applied the Official OnePlus 5 tgsp video it had lots of bubbles on the edges that he said couldn't be removed while I watched XDA's TK review and his application looked perfect with TK giving it a thumbs up. In the comment section of that review TK said all was well even after a month of usage. I was surprised as the Official tgsp has garnered horrible reviews and comments in the XDA Oneplus 5 accessories section. The most consistent criticism of the Official tgsp is that it cuts off a tiny fraction of the screen. In fact, so far my research indicates all of the "Full Adhesive", "Full coverage" tgsp cut off part of the screen. Personally I think the reason they have a black line on the edges is to hide inevitable bubbles due to the curved edge. The thicker the tempered glass the wider the side black stripes (e.g. Orzly versus Official).
Here is the criteria I'm using in selecting a replacement for my Orzly tgsp and cheap bumper case. Note that I've already installed a dBrand skin so that skews my criteria somewhat.
Tempered Glass screen protector:
- Must have full adhesive (not just top/bottom and side adhesion) and full coverage
- Would prefer, but am a tiny bit flexible on, part of the screen being cut off (limit is that not one pixel of the notification bar's clock is trimmed)
- Must have an oleophobic coating
Case:
- Needs to be as non intrusive as possible adding grip but not greatly ruining the sleekness of the phone
- Uses a minimalist design and/or clear materials so as not to obstruct viewing of the dBrand skin I've installed
- With the case on the buttons (power and volume rocker) must not be difficult to press
So far my research has me leaning towards the Official OnePlus 5 or Biuzko tgsp with a Rhinoshield Crashguard case. My one issue is that the Rhinoshield reviews always mention how difficult the volume rocker buttons are to press. Here is the video that has me leaning in that direction as is seems to best address my criteria
OnePlus 5 best case/protector setup
I'll being doing more reading and searching today hoping to find the unicorn of tgsp/case combinations. The dust under my Orzly is driving me mad but the feel and responsiveness of its surface has me rejecting a film/plastic protector alternative.
I'm using the Biuzko as well with the Tudia MERGE case no problems.
The trick is to first put OP5 in the case, THEN place the screen protector on. It fits perfectly, and you can't mess up the alignment since it falls right in. Then I just try to put pressure on the sticky parts for a few minutes.
I've had no problems for 3 weeks now.
I installed mine the same way, but I'm using the op5 carbon fiber case.
Sent from my ONEPLUS A5000 using Tapatalk
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Hello,
I recommend you the plastic screen protectors from GadgetShieldz. I made a review about it on another post on xda but to summarize, it's a bit difficult to apply but then it's great. The screen looks good and it's cheap ^^ highly recommend.
FYI, I was struggling with TGSP for the OP5 and I just gave up. There is no good alternative atm.
TMSxXDA said:
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
Click to expand...
Click to collapse
Thanks for this, I recently just applied it and noticed all the issues you raised.
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Skinomi makes a wet application protector in both clear and matte. I posted pics of the matte version here. Since that post, I've experienced no scratches or orange peel effect. It's also great for no fingerprints.
You can always get the Nillkin H+ Pro, but only if you are using a spigen case or otterbox. Right now I am using the Spigen Rugged Armor with Nillkin H+ Pro and the gap between the glass and the case is around 1 mm (i would say 1.5 mm if I have to be more accurate). The Otterbox case is even better but I find it too bulky, tried it once for an hour and I did not enjoy it, but some of you may like it.
Few words about the Nillkin H+ Pro.
I know there are few variants of the Nillkin glass and I have tried all of them in the past. In my opinion the best glass is exactly the H+ Pro even tho it is a 1 dollar more expensive. The glass has zero rainbow effect or halo effect, it is 99 to 100% clear. It has amazing orleophobic coating. My Honor 8 has the same glass for 6 months now and it is flawless. I am going to change my nillkin glass with the official 3D tempered glass but only because I received the rhinoshield bumper. Otherwise I would not change my nillkin. You are going to get used to the small gap in a week or so.
Don't leave the phone without a glass.
I just applied mine, best screen protector I ever had, pure quality. Quote me on that
I love the official OnePlus screen protector, it's premium & looks good. Who ever made this thread is straight up wrong. The one he recommended is no Bueno, the glass part doesn't have enhesive. Look I am a OnePlus 5 conisuer, the screen protector is fantastic ?
I have siegen case. Can I buy the original screen protector from oneplus store with no problems? Or can I suggest me something with dust proof and oil proof ?
Hello all,
Just got my supcase delivered today and on first look it's really of premium quality and looks great on the phone. I had been looking out for cases from the launch date and none of them were upto the mark. I had been using supcase on my previous phones and they have always been great. So i sent them an email asking if unicorn beetle style would be available for the OnePlus 7T and got a positive reply that by November it would be available. And boom, here it is in Amazon india.
About the case :
Premium
Has a good camera cutout protection
Front display protection has a good lip on top and bottom (tempered glass applied)
Not a TPU case so no yellowish case after a few months
Cons - Makes the device slightly larger to hold but will get used to in a few days( but better than most of the cases out there).
Overall I'm really satisfied
Now let the pictures do the talking.
Oh btw i wanted a case that could show off the colour of the phone plus look good. I saw many transparent cases with black border but everything had one flaw - the camera cutout protection black strip was hiding the OnePlus logo a bit and it looked cheap(A few had their pictures posted as if the logo wasn't hiding but in real it was hiding the OnePlus logo). Guess only ringke had the correct cutout other than supcase.
Hi. Thank you for this review, was just looking at it.
Do you use the official oneplus tempered glass? Does it hinge the glass protector up like many others do? I have the official one and this is a must for me.
Question regarding the clear back; does it fill up with lint and dirt? I always felt that clear cases filled with lint and pocket **** when using it for a long period of time. Basically when I take off my 1+ case it's always got dirt in it anyway so I assume this would show through the clear back..
aleck0112 said:
Hi. Thank you for this review, was just looking at it.
Do you use the official oneplus tempered glass? Does it hinge the glass protector up like many others do? I have the official one and this is a must for me.
Click to expand...
Click to collapse
I have used tempered glass from glazed Inc and its similar to full screen tempered glass from official OnePlus and this case does not hinge.
Case is tempered glass friendly.
MrGimpGrumble said:
Question regarding the clear back; does it fill up with lint and dirt? I always felt that clear cases filled with lint and pocket **** when using it for a long period of time. Basically when I take off my 1+ case it's always got dirt in it anyway so I assume this would show through the clear back..
Click to expand...
Click to collapse
I too faced this issue using original tpu from oneplus.
I am not sure if this supacse will get filled up with dirt. For now nothing's inside the case. But I remember the OnePlus case had dirt inside it even on day one and i kept cleaning it every two days or so regularly.
From past few days there's nothing inside this clear case(supcase)
vicky2131 said:
I have used tempered glass from glazed Inc and its similar to full screen tempered glass from official OnePlus and this case does not hinge.
Case is tempered glass friendly.
Click to expand...
Click to collapse
Can you provide a top down image on the screen so I can see the case lip? May get a better idea with that. Thank you
aleck0112 said:
Can you provide a top down image on the screen so I can see the case lip? May get a better idea with that. Thank you
Click to expand...
Click to collapse
Hope this is clear.
I am supposed to get my pixel 5a tomorrow. I want a supcase but they do not have it yet. I may put off opeing the box until I get one.