I use note pro with rom 6.6.30 ivan. Due to curiosity,I install safestrap then reboot my phone black screen, no fastboot,no recovery,no power on and connect with pc no notification, no have driver qhsusb qloader in device manger
Related
Hello everyone.
Yesterday while i was trying to install a new rom in my MI5 I bricked my phone.
I wiped the system, data, cache and kernel cache, then, as a mistake I rebooted my phone and all of a sudden it turned black and I couldn't go to the recovery or fastboot.
Now the phone is just black, no response trying to boot or go to recovery\fastboot. When I put to charger theres no LED LIGHT.
So I installed the adb drivers, installed MiFlash, and the computer recognized the phone as QualComm HS-USB QDLoader 9008 COM4.
Then I installed a fastboot rom into the phone using MiFlash, it said flash done and successful.
But, it keeps freezed in a black screen.
Should I just wait for a miracle or theres another option?
My PC still recognizes the phone as QualComm HS USB QDLoader 9008 COM 4.
Thanks in advance.
// EDIT (SOLVED)
Ok so now it booted with the fastboot ROM I flashed.
As I see, after the flash it takes hours to boot. I just went home, dropped the phone in the bed, then I pressed Vol up+Vol down and power button at the same time for two minutes and worked.
Hello Experts,
I tried to installed custom twrp recovery by flashify app, it asked for reboot, I pressed yes and since then It never booted on recovery mode.
I turned on normal mode by power button, it turned on normally but never turned on in recovery mode again, it also stopped charging when phone was off.
Then I flash boot.img by using flashify app again since then it never turnned ON even in normal mode ( Power button)
Currently it only shows some horizontal lines on screen (due to failed boot img ), stopped charging. not detecting any USB driver, USB debugging is disable,:crying:
After digging more with help of test points I managed to comumunicate with Huawei USB COM 1.0 driver.
Do you think guys my phone can come back to life again?
Please help
Dead Phone
- You will need firmware file (from consumer.huawei.com) + Handset Product Line Driver v2.01.02.00 + Original USB Cable + Honor 4x Che2-L11 Test point (from Google Search)
- MCT Dongle Pro v2.0.5 could UnBrick Honor 4X (CHE2-L11), it can directly flash Update.App via USB COM PORT (EDL 9008 Mod)
- EMMC Dongle Version 2.0.5 could UnBrick Honor 4X (CHE2-L11), it can directly flash Update.App via USB COM PORT (EDL 9008 Mod)
By mistake, I installed Redmi 4x ROM on my Redmi 4A.
I install official ROM (which downloaded from mi website) via TWRP, after install when the device is restarted my screen went black also device not responding.
Then I press the power button also power button+volume down and power button+volume down+volume up button for a long time but nothing happened.
Then I connect my device with PC, but PC doesn't show my device but PC alert (by sound) that any USB device inserted, then I open MiFlash it shows my device as COM10*, then I try to install Redmi 4A official ROM but MiFlash when I click flash it says me "Cannot receive hello packet".
Is there any solution for me??
or my device has gone dead??
atmshiblesadik said:
By mistake, I installed Redmi 4x ROM on my Redmi 4A.
I install official ROM (which downloaded from mi website) via TWRP, after install when the device is restarted my screen went black also device not responding.
Then I press the power button also power button+volume down and power button+volume down+volume up button for a long time but nothing happened.
Then I connect my device with PC, but PC doesn't show my device but PC alert (by sound) that any USB device inserted, then I open MiFlash it shows my device as COM10*, then I try to install Redmi 4A official ROM but MiFlash when I click flash it says me "Cannot receive hello packet".
Is there any solution for me??
or my device has gone dead??
Click to expand...
Click to collapse
You van try with test point
You have to try the testpoint method, it is the only way for mi flash to recognize the phone. Just search testpoint redmi 4a and should be there a guide on miui forum. I once had that prolem.
Last night I turned off the phone and today I want to turn on but nothing only black screen. not able to charge, when I connect to PC I hear sound but only in the device manager can see COM/LTP ports Qualcomm HS-USB QDLoader 9008 (COM4).
I read this is the EDL mode but I don't know how started in this mode.
I installed the ADB, XIAOMI Drivers and MiFlash. After I flashed a chinese stock rom and after flashed the latest global stock rom. The flash was successful but When I disconnect and reconnect again to PC my Redmi 4x is still in EDL mode...
I tried the 2-3 buttons restart and some youtube things but the results is same: Redmi 4x stuck EDL mode.
Plz could anyone help me?
hello! i tried to flash the stock miui via fastboot, unfortunately, during the process i had a blackout, and the pc shut down... as a result i have the redmi note 10 pro (sweteu) in hard brick, the pc recognizes it in "Qualcomm HS-USB QDLoader" what do you recommend me to do? fortunately i still have an old mi a2, however i would hate not to try to restore this little gem of a smartphone.
Can you still get into recovery / fastboot?