Database Develop

Emergency! Please help

Hello!
Recently flashed Dr.Ketan ROM, with the TWRP recovery, Was working perfectly, up until it rebooted. Now, I get a message in the top left corner saying that 'custom binary blocked by FRP lock' and the phone shuts down. and I'm getting the same message even if I try to boot into recovery. I tried Flashing new ROM through odin, but I'm unable to do so, as I'm getting a message on phone saying 'sw rev check fail device 2 binary 1'. I'm pretty clueless and stuck. Please, Please help me out. I've spent hours and I'm still nowhere close to getting it back running. My model is SM-N920G.

This is the message I get on Odin.
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Re download the stock rom. You needed to turn on oem unlock

Odin fail. PLEASE help me.

I have a Galaxy S6 edge from verizon(If that wasn't already obvious). I bought it from craigslist for 450$ and it seemed like a steal. But the phone is stuck in Reactivation lock and I cant fix it. I've tried odin. And it keeps failing. I tired different firmware version ports and cables and yet it still fails. This the error.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
Can someone please help me with this. I can't get my money back and it took so long to save.:crying:

Are you flashing the correct firmware?
Also, with the recovery lock issue you will need to contact the seller and have him unlock it for you.

need help, can't run repair rom on SM-920C

Hello guys, i can't seem to repair my phone after an error using ODIN. My Model is SM-N920C from UAE (XSG region)
The error in Download mode is 'SW REV . CHECK FAIL. DEVICE: 3, BINARY: 2
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[HELP][GT-I9295][STOCK ROM] Fail to install firmware 5.0.1

Hey guys I was going to update my S4 active from 4.4.2(Stock not rooted) to 5.0.1 through Odin but it failed and I don't know what to do. Any help is appreciated
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
EDIT: DOWNLOADED ANOTHER FIRMWARE FROM SAMMOBILE AND NOW IT WORKS!

Download again from sammobile just to be sure file is not corrupted.
Use Odin v3.7
Use good data cabe. Use good USB. Do no use USB hub.

wilsonhlacerda said:
Download again from sammobile just to be sure file is not corrupted.
Use Odin v3.7
Use good data cabe. Use good USB. Do no use USB hub.
Click to expand...
Click to collapse
Thanks for the reply. I already resolved the issue. I downloaded another firmware and now it works

odin fail! when flashing stock rom. n920i

im on infinity pro 8 rom
this is the stock rom i want to flash.
while trying to flash stock rom i get this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
its stuck at the downloading mode. cant boot to twrp, it would just take me to a error page when i reboot and it says:
An error has occurred while updating the device software. Use the emergency recovery function in the smart switch pc software. i tried that but nothing happen.