So today morning when I woke up, I turned my phone on, but It didn't turn on and was stuck on Logo screen with a Red text at above stating "custom binary blocked by frp lock". I'm using a Galaxy Note 5 (N920C) with Note 7 rom in it. I searched on the internet and tried flashing some firmware files with Odin but all failed with some error on download mode "SW. Rev check fail...". Now When I turn my phone on, it goes to screen with "an error has occurred while updating the device software use the emergency recovery function". I tried firmware initialization with Kies 3 and Smart Switch, but both failed, and same error as earlier on Download Mode. I think its the Bootloader problem i.e being locked and not letting me flash. also on Download mode, FRP lock=On, Which caused the problem on first hand. I cant boot into recovery aswell. Any help or suggestion would be really appreciated.
Thanks in Advance.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
These are the logs of Odin when I tried flashing Custom recovery, and on the download mode, its saying "Custom Binary blocked by FRP Lock"
AJ122 said:
So today morning when I woke up, I turned my phone on, but It didn't turn on and was stuck on Logo screen with a Red text at above stating "custom binary blocked by frp lock". I'm using a Galaxy Note 5 (N920C) with Note 7 rom in it. I searched on the internet and tried flashing some firmware files with Odin but all failed with some error on download mode "SW. Rev check fail...". Now When I turn my phone on, it goes to screen with "an error has occurred while updating the device software use the emergency recovery function". I tried firmware initialization with Kies 3 and Smart Switch, but both failed, and same error as earlier on Download Mode. I think its the Bootloader problem i.e being locked and not letting me flash. also on Download mode, FRP lock=On, Which caused the problem on first hand. I cant boot into recovery aswell. Any help or suggestion would be really appreciated.
Thanks in Advance.
Click to expand...
Click to collapse
Try flashing 'latest' firmware of your variant/region. And don't switch off 'OEM unlock' under developer options. Always keep it and usb debug enabled after boot successfully.
Related
hello xda developers
my friend came to me with his new galaxy s one phone to install Arabic firmware for him
well i tried home power voice down but it didn't go into download mode
then i tried power + home it went into download mode
after i start flashing using odin with 2.3.3 firmware I9000JPJV6_OJPJV6_JXJV6
odin failed to finish
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> zImage
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
and a message on the phone said invalid bootloader
later i knew that its not a normal galaxy s one
its anycall galaxy s and we don't have that version of galaxy S in my country so that's why i flashed the phone with out noticing that am flashing with normal S firmware
now the phone is completely died it don't go into download mode and no recovery mode nothing the phone is dead
is there any kind of solution for that or the phone need jtag box or smoothing ?
please help me because its the first time to face that kind of problem
lebknight said:
after i start flashing using odin with 2.3.3 firmware I9000JPJV6_OJPJV6_JXJV6
odin failed to finish
now the phone is completely died it don't go into download mode and no recovery mode nothing the phone is dead
is there any kind of solution for that or the phone need jtag box or smoothing ?
please help me because its the first time to face that kind of problem
Click to expand...
Click to collapse
1) All guides and Helpline for this model are in PIT STOP, link below
2) Flashing an SGS firmware on a Anycall SGS , will brick phone but recoverable by using Repair Kit found at PIT STOP
3) But since you say it is dead may be due to lack battery charge while flashing and rebooting (Try MY Android Solution link below for solution)
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
maybe this will help
GabrielAK89 said:
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
Click to expand...
Click to collapse
Hi
did you already try to get back to 100% stock ROM??
-
-
i can not yet post links but if you google "galaxy s stock rom" and than the first link.
take a look here for the stock ROMS
http://www.sammobile.com/firmwares/database/GT-I9000/
it warked with another version...strange thow.
Thx.
I will try now to put again the 4.4.x
I tried upgrading to the wear android OS, but the process failed half way through. Now my watch boots immediately to a screen with a yellow triangle between the watch and PC with "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I've tried re-flashing Wear_511_LCA43__09_24_2015.tar with Odin v3.09 and get this
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also says "Invalid Signature: BOOT" on the watch face in addition to the yellow triangle exclamation point screen of doom.
Occasionally I get this
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried many other versions of OS and they all have the "NAND Write Start! FAIL!" error. Tried the PIT file fix I found in the forums, it fails as well.
Hope someone can help a novice out or at least point me in the right direction.
Just a quick guess, try using Kies since it says so
Hi man, I encountered the same issue previously.
I thought I bricked my watch. Somehow, read that as long as ur phone still has that triangle icon, means it's on download mode.
So I thought theres still hope. What I did was I unjust and reinstalled Samsung drivers on my pc. Closed kies. Download a stock rom and try flashing again. True enough. After some tries, downloading starts and my watch has been flashed back to stock rom. Nl2. Hope this helps.
pool7979 said:
Hi man, I encountered the same issue previously.
I thought I bricked my watch. Somehow, read that as long as ur phone still has that triangle icon, means it's on download mode.
So I thought theres still hope. What I did was I unjust and reinstalled Samsung drivers on my pc. Closed kies. Download a stock rom and try flashing again. True enough. After some tries, downloading starts and my watch has been flashed back to stock rom. Nl2. Hope this helps.
Click to expand...
Click to collapse
So just keep trying to load the AP rom over and over and hopefully it will work? Feels like I've been doing that for a ridiculously long time now. Load, fail, reboot, repeat.... ugh.
I'm using AP-R381XXU0BNL2_user.tar.md5 btw, correct rom, yes? Also, did you load drivers from Kies or download the Samsung USB drivers?
Close all Kies process in task manager or even better - uninstall it. You can install it again after...
Sent from my SM-N910C using Tapatalk
zviki said:
Close all Kies process in task manager or even better - uninstall it. You can install it again after...
Sent from my SM-N910C using Tapatalk
Click to expand...
Click to collapse
Everything I've read says not to use Kies, so I uninstalled it a while ago. When I did try using Kies, it would give me the error message "Device not responding. To resolve the issue, reboot the device." and nothing shows up in the emergency firmware recovery menu. Kies3 says that "The connected device is not supported by
Kies 3." and, again, nothing shows up in the emergency firmware recovery menu.
Any other suggestions?
dont use keis, try the stuff i have in my root gear 2 neo thread, its helped several people out of this situation. and use the tarball i have in there too
HI friends
I have note 5 duos SM-9208 brought in Taiwan, Its completely official with latest updates running on 6.1 marshmallow
I want to have just TWRP recovery on my phone no rooting for now, as i want to have my official stock rom backup as soon as i get twrp on my phone, later i can go for rooting
did oem unlock, usb debug on , connected on download mode and tried to flash twrp file (twrp-3.0.2-1-nobleltezt.img.tar)
the box turned green but no pass and then i get blue screen with white exclamation mark screen and chinese text on it ( i.imgsafe.org/ce3bada933 .jpg) remove space before .jpg
guide i used stechguide.com/install-twrp-recovery-on-samsung-galaxy-note-5
nothing happens in ODIN too it says RQT close!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
I don't understand whats happening with that blue screen as everything is in chinese,
it didnt work as explained in that link, please help me guys any guys from taiwan if they can explain what it says and how to install twrp successfully here
thanks
..
Got the same problem after latest update of my note 5 SM-N9208 from Philippines.
yogiexp said:
blue screen error with chinese text i.imgsafe.org/ce3bada933 .jpg
guide i used stechguide.com/install-twrp-recovery-on-samsung-galaxy-note-5
Click to expand...
Click to collapse
Tried it but doesn't work.
yogiexp said:
HI friends
I have note 5 duos SM-9208 brought in Taiwan, Its completely official with latest updates running on 6.1 marshmallow
I want to have just TWRP recovery on my phone no rooting for now, as i want to have my official stock rom backup as soon as i get twrp on my phone, later i can go for rooting
did oem unlock, usb debug on , connected on download mode and tried to flash twrp file (twrp-3.0.2-1-nobleltezt.img.tar)
the box turned green but no pass and then i get blue screen with white exclamation mark screen and chinese text on it
nothing happens in ODIN too it says RQT close!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
I don't understand whats happening with that blue screen as everything is in chinese,
it didnt work as explained in that link, please help me guys any guys from taiwan if they can explain what it says and how to install twrp successfully here
thanks
Click to expand...
Click to collapse
Just found a way to get TWRP back on my note 5.
I flashed with odin the Chainfire autoroot Auto-Root-noblelte-nobleltextc-smn9208.tar.md5
Your phone will get stuck on boot screen and it will say in left upper corner "seandroid not enforcing".
Push volume down + home + on/off, to get back in download mode.
Flash with odin the TWRP file.
Now you will have working TWRP (i rooted my phone directly)
It worked for me, let me know if it worked for you.
Regards,
Pr4d0
Did you run the CROM Service app to unlock the bootloader? You will not be able to flash anything until you unlock the bootloader. My girlfriend has the same phone and you are in luck that I still have the CROM Service app, you can download load it from here
https://1drv.ms/u/s!AumjSD0UEAABgpkxvUZZgxs0UAum5g
dhonzik said:
Did you run the CROM Service app to unlock the bootloader? You will not be able to flash anything until you unlock the bootloader. My girlfriend has the same phone and you are in luck that I still have the CROM Service app, you can download load it from here
https://1drv.ms/u/s!AumjSD0UEAABgpkxvUZZgxs0UAum5g
Click to expand...
Click to collapse
thanks i think its the issue with crom unlock, but i see warning everywhere it will knockout knox! i was trying to have twrp without rooting or disable knox, but i guess i dont have choice with my model.
Hi there. I have a Galaxy A6 with broken screen. I don't know if touchscreen works, but all I see is a permanently white screen.
All I want is to recover my files from in there, but obviously all I see on PC is an empty device because the phone is not unlocked. I stupidly didn't set a Samsung account in the device, so unlocking it with find my device is not an option. There's no USB debugging or OEM unlocking done either. Here's what I already tried:
1. Rebooting in recovery mode and trying to get into ADB: nope, stock recovery ROM apparently doesn't allow that.
2. Rebooting in download mode and flashing TWRP with Odin to get a recovery with adb and disk mounting enabled: Odin sees the device and start flashing, but then fails. This is the output:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 25 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
3. Trying to flash stuff with adb and fastboot while in download mode: adb and fastboot don't see the device at all in any mode (tried normal boot, recovery and download). In windows device manager, the device is seen, in download mode, as "Samsung Mobile USB Modem". Yes, I have installed the Samsung drivers.
Does anyone have a clue about what can I do? Thanks for the help!