Hello guys. I've been constantly trying to make my P9 L09 work again after I tried out a beta of emui 5. After trying to get back to stuck a lot of times, with many different OVA's my phone has done nothing but boot into eRecovery. It says "update succesful" but then it will be in a boot loop into erecovery asking me if I want to repair through wifi. I have no idea what to do now. Since the wifi thing just fails. I've tried everything and right now I just want to back to stock. But not even Huawei's own Firmware seems to work. I am from Denmark and I was on a EU firmware B182 to start with. I did not unlock my bootloader or root anything, only updated with vol up, down and power button. I tried to get it to hard reset, but it only gives me the option to restore via. wifi.
The problem starts as soon as it has finished "Optimizing system", please help, and be careful when updating to unofficial beta! ^^
If I find a way to resolve it I will post it below!
I think your phone C432 so try this http://forum.xda-developers.com/p9/help/missing-themes-compass-icons-t3519338
Upload files sd card other phone or pc, open your phone dload mode (press vol+ vol- and power button) and ok.
FIXED!
:laugh::laugh::laugh::laugh:
Okay so I fixed the issue. I almost gave up, but I had installed the latest OTA from Huawei's website, and after many attempts at doing a hard reset it finally gave me the option to clear cache and reset the phone to factory. Maybe I had to time the buttons better or maybe it just sorted it self out, but now the phone is like new!
So if anybody runs into the eRecovery boot loop, be patient and try to reset it many times! It might sort itself out.
Thank you for help by the way!
Related
I have a European Huawei P9 EVA-L09 model which I adore. It was running Marshmallow and EMUI 4.1. I found a Nougat beta ROM and I tried to install it but have left it in an unusable state.
I don't think the phone is rooted but I do think the bootloader is unlocked.
I can boot into 3 modes.
Mode 1 - Just reboot
Huawei eRecovery where I get the options to download latest version and recovery, Reboot and Shutdown. If I select the Download latest version and recovery it setups my Wifi and then fails with the message Getting package info failed.
Mode 2 - Power + Vol Up
It boots into a screen that gives me the option to Reboot your System Now, Wipe data / factory Reset , Wipe Cache partition. Selecting Wipe Data/Factory reset returns back to this screen with an error - Red Exclamation mark. Selecting Wipe Cache partition seems to perform a wipe and returns to the original screen with the 3 options again.
Mode 3 - Connect to PC with Hisense and power + vol down
This goes into an android recovery screen which is white with a green android displayed
I have the USB drivers installed on my PC but I cannot see the phone in Windows explorer when I plug it in via USB. I do hear the recognition tone that Windows has recognised that a USB device has been attached. The Huawei PC software doesn't recognise it unless I go into the white android screen and select recover. This always fails saying it cannot find a package.
I have installed stock P9 Marshmallow firmware on my SD card in a dload folder (which is how I bricked it in the first place. When I hold Vol up and Vol Down and power it starts installing but then fails about 40% - 50% through. I have tried multiple versions of the L09 firmware but none of them install successfully.
I am not very technical and not an android expert so cannot say I have done everything perfectly correctly. #
Is my phone bricked or is it possible get my phone back working?
You can get your phone back, search the forums for dc phoenix, which has helped people including myself.
The other option is to go the huawei website, and look under downloads for p9. Find the two firmwares for beta rollback and follow the instructions, although i am not 100% confident that will work for you
use dc phoneix ... i was the in tha same condition
So I have installed and tried install a few different ROMs to the phone. DC Phoenix recognizes the phone as it comes up with the IMEI and version in the left hand window. It seems to install the ROM sucessfully.
I get a message at the end saying it finished successfully but when I boot back up it just goes straight into the same eRecovery screen I have tried B166 and B322 and no luck. Is there anything different I should be doing?
...and now I have a new issue
Thanks for everyone's help. After downloading and trying about 10 different ROMs I was able to get a Nougat ROM to install. Now I have a different problem
1. When I reboot I get a verification failed message. I get an option to go to eRecovery (which works the same as above and doesn't find a package)
So what I really want now is just to get back to stock Marshmallow and not have a verification message and not have some Nougat version that doesn't look like the official Huawei ROM.
So what next folks?
I encountered the exact same problem a few days ago. I didn't try DC Phoenix, instead sent it to Huawei for repair, claiming the phone was in a boot-loop I couldn't recover from.
They have fixed it now and the P9 is on its way back to me. What's strange is that they have swapped the whole motherboard for a new one! Didn't expect that.
Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!!
So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo.
The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share. :crying::crying:
iantechie1979 said:
Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!! So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo. The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share. :crying::crying:
Click to expand...
Click to collapse
Can you please edit your post ? Add some space, here and there if you want some help... It is nothing but pain for both eyes and mind to read you.
Onto related topic, did you manage to get your phone back to a functionnal state ? Note that the boot sequence can take time after a wipe so maybe it's not broken at all.
As for eRecovery, it never helped me to restore my device, tried on two different Wi-Fi networks after two completely unrelated issues.
Concerning warranty, I guess it depends on your country and where you bought your phone. I went to the carrier which provided me mine this morning since I ended up with a strong brick last night and I'll get a new phone in a couple of weeks.
Zarou said:
Can you please edit your post ? Add some space, here and there if you want some help... It is nothing but pain for both eyes and mind to read you.
Onto related topic, did you manage to get your phone back to a functionnal state ? Note that the boot sequence can take time after a wipe so maybe it's not broken at all.
As for eRecovery, it never helped me to restore my device, tried on two different Wi-Fi networks after two completely unrelated issues.
Concerning warranty, I guess it depends on your country and where you bought your phone. I went to the carrier which provided me mine this morning since I ended up with a strong brick last night and I'll get a new phone in a couple of weeks.
Click to expand...
Click to collapse
finally a reply! okay so ill edit my post once ive finished replying to you. First off thanks for taking your time to read my post, i am most greatfull. In response to your questions,suggestions i can tell you:
i went to my friends, connected to their broadband and attempted to use eRecovey to update/restore my device. ALAS it did not work! I tried several times and it gets to downloading package from server only to end in a FAIL.. I got home tried connecting to public wifi and doing eRecovery but it just fails. So like you I have never managed to get eRecovery to work.
As for the booting sequence, as i explained before, whether i access stock recovery and wipe cache and wipe phone it does this no problem, reboots, only to get stuck on the honor logo boot animation. The same goes for installing updatte.app with three button method. it says its installed succesfully but does not get past the honor logo boot animation. Unfortunately your suggestion that it might just take a long time to boot is not the case I have left it for hours you see and it never gets to the setup wizard :crying:
As for warranty, i am in uk, bought the phone via amazon, and it was unlocked, so not from a carrier like you. So i guess ill just have to find my nearest huawei service centre and have them look at it.
Does anyone know the procedure as far as doing this. Do i phone them or email my problem and then send my phone to them or what?? Any help is very welcome.
Thanks for your time and patience.
Please, please help...i'm desperate
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small! :good: :fingers-crossed: :angel:
iantechie1979 said:
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small! :good: :fingers-crossed: :angel:
Click to expand...
Click to collapse
How comes you have TWRP with a locked bootloader ?
Zarou said:
How comes you have TWRP with a locked bootloader ?
Click to expand...
Click to collapse
??? hi, I.m sorry, i think you must of misread some of my post. I dont blame you, it was bloody long and confusing!
I only mentioned twrp in the very beggining to run you through the steps to my never ending being stuck on honor logo boot animation. I used TWRP to wipe all partitions and format. From there i used 3 button method to install the update.app(B130) on my sd-card. this was succesfull, no errors and rebooted. I didn't expect any problems. But as i explained it never gets past boot logo.
Obviously now, twrp has gone, i am back to stock recovery and my bootloader is locked.
*I can access stock recovery to wipe cache and wipe the phone no problem and all works with no error messages.
*I can access fastboot(bootloader) but the fastboot commands are useless because my bootloader is locked once again and i cant turn on usb debugging or oem unlock in developper options....because my phone wont boot past honor logo...
*Three button method works everytime, 100% success, no errors, reboots but guess what?? IT WONT GET PAST THAT DAMN HONOR BOOT LOGO!!!!!!!!!
Ive tried everything, but NO LUCK. I came up with this idea today though--- download theB130 rollback from nougat to MarshMallow update.zip. Extract the update.app and put that in my sd-card/dload folder and do 3 button install method.
I might even do the same with the nougat B350 just to cover all bases. So i am downloading now, gonna cross my fingers and any other body parts, pray to all the gods...and hopefully i wont be a crying,sniveling,howling piece of mess by tomorrow.
UNLESS OF COURSE SOMEONE HAS THE KNOWLEDGE I SEEK AND IS WILLING TO SHARE IT :fingers-crossed:
thanks Honor-able friends....
iantechie1979 said:
??? hi, I.m sorry, i think you must of misread some of my post. I dont blame you, it was bloody long and confusing!
I only mentioned twrp in the very beggining to run you through the steps to my never ending being stuck on honor logo boot animation. I used TWRP to wipe all partitions and format. From there i used 3 button method to install the update.app(B130) on my sd-card. this was succesfull, no errors and rebooted. I didn't expect any problems. But as i explained it never gets past boot logo.
Obviously now, twrp has gone, i am back to stock recovery and my bootloader is locked.
*I can access stock recovery to wipe cache and wipe the phone no problem and all works with no error messages.
*I can access fastboot(bootloader) but the fastboot commands are useless because my bootloader is locked once again and i cant turn on usb debugging or oem unlock in developper options....because my phone wont boot past honor logo...
*Three button method works everytime, 100% success, no errors, reboots but guess what?? IT WONT GET PAST THAT DAMN HONOR BOOT LOGO!!!!!!!!!
Ive tried everything, but NO LUCK. I came up with this idea today though--- download theB130 rollback from nougat to MarshMallow update.zip. Extract the update.app and put that in my sd-card/dload folder and do 3 button install method.
I might even do the same with the nougat B350 just to cover all bases. So i am downloading now, gonna cross my fingers and any other body parts, pray to all the gods...and hopefully i wont be a crying,sniveling,howling piece of mess by tomorrow.
UNLESS OF COURSE SOMEONE HAS THE KNOWLEDGE I SEEK AND IS WILLING TO SHARE IT :fingers-crossed:
thanks Honor-able friends....
Click to expand...
Click to collapse
OK, sorry for the misunderstanding. Yeah, try that and if this is still not working, I guess all you can do is try the same with other packages.
Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!!
So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo.
The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share.
please...please....help
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small!
iantechie1979 said:
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small!
Click to expand...
Click to collapse
i guess you are trying to update with the small sized ota b130. Use the full Ota b130 instead
Cienight said:
i guess you are trying to update with the small sized ota b130. Use the full Ota b130 instead
Click to expand...
Click to collapse
I wish my friend. No it is the update.app from the full b130 update.zip. Anyhow I have downloaded the b102, the earliest version I can find and the b130 rollback from nougat to MM version. Gonna extract the update.app from both and try one after the other to install via 3button method. I am just waitingfor my Bro to lend me his laptop so I can copy the files on to my sd card. So wish me luck, he's just come round. I'll know in a couple of hours if it works
It's all gonna be fine
Hello. After rebranding my phone from PRA-AL00X to PRA-LX1 it's stuck on the Factory reset screen after it gets to 99%. I don't know what to do. I can't enter fastboot either. But I have a question: why when I plug it in, when the factory reset screen is there, my PC makes a sound effect as it's connected to my phone (you know, the usual sound when you plug something into your PC). Can it still be saved? Thank you.
Probably a system partition size complication. Are you using RecoveryOreoNoCheck?
Read this or this.
Something weird happened. So, last night I left my phone to run out of battery. Today, after booting it again it worked. But it rebooted itself after it got into Android, and now it's stuck again on the factory reset process at 99%.
EDIT: I think I managed to figure it out. So, after my phone runs out of battery it restarts normally, into Android. After that I need to let it charge for some time, because of the low battery it may shutdown. I will update soon if I figure it out completely.
EDIT 2: It seems that after I enter my pin to unlock my device it reboots itself. Why is that?
Is there any way I can enter erecovery mode without enabling developer options and usb debugging? Because once I input my pin, my device restarts.
EDIT: Seems like I managed to enter my pin without my device restarting. I think it was restarting because the battery was low.
I have another question. Why after I manage to boot my phone, when I try to reboot to bootloader, it reboots, and enters again the Factory reset screen?
PoweredLights said:
I have another question. Why after I manage to boot my phone, when I try to reboot to bootloader, it reboots, and enters again the Factory reset screen?
Click to expand...
Click to collapse
Like I said in my previous post
Probably a system partition size complication. Are you using RecoveryOreoNoCheck?
Read this or this.
Click to expand...
Click to collapse
So as stated from the user on that link who solved the problem, try formatting the system partition then try to install the update again.
Regarding your other posts, if the update installation obviously failed or encountered some issues then by some coincidence it boots back, that doesn't mean it got fixed. The problem is still there and will become even a bigger problem, if it's not fixed.
You don't have to enable Developer Options or USB Debugging, to boot into eRecovery.
CrimsonBloodfang said:
Like I said in my previous post
So as stated from the user on that link who solved the problem, try formatting the system partition then try to install the update again.
Regarding your other posts, if the update installation obviously failed or encountered some issues then by some coincidence it boots back, that doesn't mean it got fixed. The problem is still there and will become even a bigger problem, if it's not fixed.
You don't have to enable Developer Options or USB Debugging, to boot into eRecovery.
Click to expand...
Click to collapse
The problem is, I can't enter bootloader nor erecovery. I'll try to factory reset with the phone booted up.
EDIT: After factory resetting from settings, when the phone was booted up, it works now. I tried to reboot it and it reboots fine, without the factory reset screen appearing. And thank you very much for your help. I will now try to install Oreo for PRA-LX1.
The only problem I have now, is: my system version is now named NRD90M test-keys.
EDIT: I fixed my phone. I reinstalled through eRecovery the newest available EMUI version and NRD90M test-keys dissapeared. Now it works fine, even if I am on Nougat. I am waiting for the EMUI 8 update, this time not forcing my phone to install it.
PoweredLights said:
The problem is, I can't enter bootloader nor erecovery. I'll try to factory reset with the phone booted up.
EDIT: After factory resetting from settings, when the phone was booted up, it works now. I tried to reboot it and it reboots fine, without the factory reset screen appearing. And thank you very much for your help. I will now try to install Oreo for PRA-LX1.
The only problem I have now, is: my system version is now named NRD90M test-keys.
EDIT: I fixed my phone. I reinstalled through eRecovery the newest available EMUI version and NRD90M test-keys dissapeared. Now it works fine, even if I am on Nougat. I am waiting for the EMUI 8 update, this time not forcing my phone to install it.
Click to expand...
Click to collapse
Hi,
I have the same issue with Phone Always going to factory reset.
Only draining it makes it boot up normally.
I also did the factory reset from within android. Now it does a factory reset lowlevel and again it hangs on 99%.
Did you also have this?
Yesterday I've had a long day and my phone ran out of battery. Before that it was working fine. When I came home I started charging it and noticed it takes pretty long to boot I am talking like 4min. It booted me into eRecovery. Pressing restart doesnt help it just boots me into eRecovery again. Update and recover system fails after a couple of seconds. (might be because my phone doesnt have any storage left except for like 1gig.) I dont want to reset it since I have a lot of important data on it. Is there any way to resolve this issue or save all the data and then reset it? Did anybody ever have the same issue?
Thx for all the answers in advance!
change oem china/ all/cn VOG-L00, flash fw 9xxxx