Related
Hi!
was working night shift. when I looked on the ground and noticed that the screen on my phone was on. so I graped it to turn it of, when I realiced that it wasn't the screen but the flash on the back next to the camera. its not as bright as when the flash is actually turned on in the camera menu. and the only way I found to turn it of is by pulling the battery out, anyone had/has a similar problem.
Michael
there was someone else who had a post about this before - search "light always on" or something like that but there was a recent post with someone who had the same problem
I did a search. not that i didn't do so before. the only thing that came up was for a different phone (wizard) not for Xperia. been looking around now for the last couple days and haven't been able to find anyone else with a similar problem. well at least on the internet.
any one else
Michael
dreamsaga said:
I did a search. not that i didn't do so before. the only thing that came up was for a different phone (wizard) not for Xperia. been looking around now for the last couple days and haven't been able to find anyone else with a similar problem. well at least on the internet.
any one else
Michael
Click to expand...
Click to collapse
went back through each page looking for it
http://forum.xda-developers.com/showthread.php?t=541959
Twas on page ten - but it looks like it never came to a conclusion... sorry dude
I wonder if he/she did ever fix it. well if I can't fix it soon I will have to take it back to the shop.
Edit: after posting I did another search and wolla. found this http://forum.xda-developers.com/showthread.php?t=485701 . this might explain it a liitle bit. after reading does posts I think I better not wast my time. since it really looks like a hardware issue
well. send it off to three on monday. they called me back yesterday.
the LED is allways on due to the wiring on the main board being corroded. we have disconnected the wire. because the damage is from corrosion we can't fix it under warranty. we are sending it back to you today.
were did the corrosion come from. its never been anywere near water.
dreamsaga said:
were did the corrosion come from. its never been anywere near water.
Click to expand...
Click to collapse
Sweat (perspiration lol)?
or maybe if you live near the ocean?
When lights are always on like that it does usually mean there was or is some trace of liquid on the circuits or on the led itself.
When you receive the phone, try disassemble it and clean the corroded circuit with alcohol and it should be good, if its only the short causing the led to always receive power.
That sucks though...
I was the first to post about this issue. 4 months on or so and I still have the same problem. The light has remained on all the time since then, although not as high intensity a when the flash is on. It's no big deal, you get used to it, like the led lights on the side of the phone. I'd also like to say this has not impacted on the flash whatsoever. It still works
DirtyVadah said:
I was the first to post about this issue. 4 months on or so and I still have the same problem. The light has remained on all the time since then, although not as high intensity a when the flash is on. It's no big deal, you get used to it, like the led lights on the side of the phone. I'd also like to say this has not impacted on the flash whatsoever. It still works
Click to expand...
Click to collapse
You mean to say that it has been running non-stop(minus restarts) for 4 entire months???
thats good news for me to know the LED is so durable.
so you haven't tried disassembly and cleaning it yourself, the corrosion that is. I taken my x1 apart already and its not that hard, just have to be gentle.
Yep. Although remember the intensity is not that high as when you switch on the flash to take a pic. And actually even though the phone is off the led remains on. It's the battery you need to take out. So it's been on constantly for the past 4 months.
same problem
dreamsaga said:
well. send it off to three on monday. they called me back yesterday.
the LED is allways on due to the wiring on the main board being corroded. we have disconnected the wire. because the damage is from corrosion we can't fix it under warranty. we are sending it back to you today.
were did the corrosion come from. its never been anywere near water.
Click to expand...
Click to collapse
so did you ever solve this problem? i have the exact same issue with my xperia. Any help would be appreciated.
This may be a problem beyond the scope of android, but seeing as I'm running it, I thought I'd try here first.
I've noticed that the lower left hand side of my screen has a "dead spot" where touch is simply not registered. To illustrate, I went to screen calibration's test screen and drew a straight line along the edge of the screen. (See Attachment)
I've tried recalibrating the screen (manually and resetting to default calibration) as well as wiping data and reinstalling the system. Reinstalling the system worked once, but then the problem came back and subsequent reinstalls did not fix the issue.
I'm running Incubus26jc super froyo [RLS 12] on the 15-07-10 340X480 Froyo Kernel.
Anyone else seen anything like this? As far as I can tell, the problem is not getting any worse. Currently, it's only a hindrance when trying to use keys in that region, but I can work around it by switching to and from landscape. It's a bit of a hassle, so I'm hoping someone may be able to shed some light on the situation.
I was sure it was hardware until the system reinstall fixed it, but am now baffled as I can no longer replicate the fix.
I have not tried reinstalling the kernel but will at some point in the next day or so. I'd like to avoid switching back to WM to check if the problem persists, but may have to... we'll see. Doing everything I can to make this phone last until the Incredible month of February when I'm up for an upgrade.
dont know the issue resolution... but i have the same with my touch vogue.. and in the same 'area' apparently as well.
hard for me to hit the 'a' key on my keyboard. hehe
I'm glad to see I'm not the only one... anyone else?
Bottom right corner for me... I was able to calibrate around it but it took a few tries.
Sent from my Full Android on Vogue using XDA App
The sensitivity across my screen was inconsistent some time ago. I found that years of my abuse had taken a tole on the exterior of my phone. It eventually got worse and I bought a new housing (with a new digitizer) on ebay for a reasonable price. If it is hardware then it really isn't that hard to fix if you like taking things apart.
If you're sure that win mo accepts input from that part of the screen then nevermind my post. I would play with a painting app though and investigate the hardware further.
I may be talking a little out my a$$ with this part but.. is it possible that in calibrating your screen the os may change it's settings on how hard you have to press and such also. that may be how you got it working.
In any case, my investment in a hew housing was well worth it considering how modern my old phone has become thanks to the developers here.
gooph said:
I may be talking a little out my a$$ with this part but.. is it possible that in calibrating your screen the os may change it's settings on how hard you have to press and such also. that may be how you got it working.
Click to expand...
Click to collapse
In my case, no - when drawing a straight line down or across the screen, the line starts 'moving' away from the stylus (like the picture in the OP).
Gah... now it's shutting itself off randomly and the dead spot has grown. Not good at all.
Yeah, mine was better for a while then 'slid' again. I ended up swapping the digitizer with my other Vogue and things are back to normal.
Sent from my Full Android on Vogue using XDA App
I have another vogue, but am weary of doing anything like that. How hard was it to get done?
All you need to do is switch the front half of the housing rather than the digitizer itself- it's not hard. There's a teardown guide somewhere in the forum, Google Vogue teardown and it should be at the top.
Sent from my Full Android on Vogue using XDA App
The only thing that worries me is that my spare vogue exists because it was dropped in a muddy puddle. I'm hoping the water damage isn't too bad. Guess we'll just have to see.
it is really annoying
I have the exact same problem and I too thought it was a hardware issue till I saw this Thread. I was ignoring it till two days ago when it started really bugging me. Now, I don't even need to press any button and it automatically gets pressed around the curve and I have a google search box there, so it keeps on searching for eee or sss randomly and started draining my battery. Is there a proper fix for this?
I thought I'd chime in too... I could never seem to calibrate the touchscreen properly in either Android or Debian. Changing the screen resolution (i.e. msmfb scaling) seems to have no effect, whether it's 240x320 or 640x480. Any area within 5mm or so of the edges of the LCD will register as the edge, making "A" and several other keys on the virtual keyboard impossible to hit. Passing calibration values to the kernel didn't seem to fix anything, but it's possible I was using them the wrong way...
i have the same kind of problem on my Kaiser... i think its realted to hardware... either the housing or the digitizer...
I am experiencing the same problem on X10 mini pro. the same screen spot exactly, i have to try very hard to get z or x or shift to work. Sometimes when I try locking the screen and unlocking it back, it works.
update
so after a very long time with this problem i decided to change the digitizer and problem is gonne. visualy the broken digitizer had nothing wrong with it. The fix was fairly easy though, there is no glued parts involved into getting a new digitizer on the u20i.
Touch Screen
I just bought a brand new Cubot One and it looks more than perfect! It has just a little problem with the touch screen ( I think its the software, need ROM change). There is a dead line on the right side of the screen that touch doesn't work at all. Any solutions? Anyone faced that before? Can I fix it myself or do I have to send it back for replacement? Is there any video or guide that shows its done?
I uploaded a video on YouTube to show the problem but i cant post it yet.. (new member)
You can write "Cubot One touch screen problem" and it's the 1st one.
Thank You!
Hi all.I bought my galaxy note almost 2 months back.This is my first android phone.I have used iPhone 4 before buying this beast.I must say its awesome.However lately i have started experiencing a little problem.I have noticed that at times while typing my note's screen( Right hand corner) became unresponsive. I had to press the screen a lot of times to actually type a single letter( it was the GO button actually.) After struggling with it for 5-6 minutes it started working fine.After a few days i experienced the same problem again.I took my handset to the service center but the screen was working fine then.
I face this problem sometimes . i noticed that after locking the screen and then unlocking it solves the problem for that moment.Is this a software problem or hardware.
I wasn't able to convince the service person that my device has the problem.How can i make him convince and get the handset replaced.
Any help would be Highly appreciated. (The problem area is actually the place on screen where application icon is situated.)
Is the problem there only when you charge it? Because, there are known issues with many smartphones where that is the case. If it is, then I am right there with you, and trying different chargers I heard will alleviate the issue.
No the problem is not when i charge the device.I face this problem very rarely but not when charging.I would like to mention that the charger provided with the device was very slightly bend on the charging end as if it was forcefully inserted in some device.Though it charges the device without any problem.
Sorry, don't know what else to say. Good luck though.
I have had the problem with the bottom right corner becoming unresponsive to screen taps .This usually happens when the phone is not in my hand but is lying on a soft surface such as a pillow. However the minute I pick it up in my hands, the problem goes away. Strange. I had my note replaced under warranty, only to find the problem re occur on the replacement phone after a few days.
Sent from my GT-N7000 using XDA App
arshadaziz said:
I have had the problem with the bottom right corner becoming unresponsive to screen taps .This usually happens when the phone is not in my hand but is lying on a soft surface such as a pillow. However the minute I pick it up in my hands, the problem goes away. Strange. I had my note replaced under warranty, only to find the problem re occur on the replacement phone after a few days.
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Any idea is this a software problem or hardware ?
arshadaziz said:
I have had the problem with the bottom right corner becoming unresponsive to screen taps .This usually happens when the phone is not in my hand but is lying on a soft surface such as a pillow. However the minute I pick it up in my hands, the problem goes away. Strange. I had my note replaced under warranty, only to find the problem re occur on the replacement phone after a few days.
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
I'm having the exact same problem and thinking of taking it back to the service point. However, could it be rom related?
I'm running LA4. GOing back to a backup of KK5 alleviates the problem.
Something else I've noticed is that when left on a surface the application
button rarely responds but as soon as I touch it on the sides it works and when Ialso plug the usb cable it also works flawlessly.
A friend of mine has the same issue, but it only occurs if the device is laying flat on a table which is odd, he plans to have yet another screen replacement but will probably wait a few months due to shoddy quality control.
I had this issue since the 1st day. It became worst during charging. Have tried every old and new rom with no luck. I though it was a screen issue where I even applied much pressure to the affected area hoping it would help but no luck.
But the issue went away after I flashed Abyss kernel 3.9 via cwm. Now the right bottom corner is as sensitive as the left bottom corner. You might wanna try a different kernel 1st before sending to the service center...
If I remember correctly one HTC phone had similar problem, screen was unresponsive when lying on table but as soon as u pick it up it worked fine. It had something to do with screen/digitizer not being grounded properly.
Sent from my GT-I9000 using Tapatalk
Moved To Q&A
Please post all questions in the Q&A section
Nazar78 said:
I had this issue since the 1st day. It became worst during charging. Have tried every old and new rom with no luck. I though it was a screen issue where I even applied much pressure to the affected area hoping it would help but no luck.
But the issue went away after I flashed Abyss kernel 3.9 via cwm. Now the right bottom corner is as sensitive as the left bottom corner. You might wanna try a different kernel 1st before sending to the service center...
Click to expand...
Click to collapse
I got my handset replaced last Saturday, but i am facing the same problem with the new handset.Are you sure that by changing the kernel the problem will be solved.If yes then how can i change the kernel of the handset ?
Interesting, this is theme #1,500,000.
outsyder said:
Any idea is this a software problem or hardware ?
Click to expand...
Click to collapse
Definitely a hardware problem because when I took it to Samsung service centre, the first thing they did was to flash the phone firmware. Only when the problem persisted, a replacement was given.
Sent from my GT-N7000 using XDA App
shot in the dark here, do you have a case on your note? I was going nuts on the first few days with my note using a flip style case only to find the damn magnet was causing the touch response issues. Took the case off and haven't seen the problem since.
After further testing it seems in my case at least it was definitely a kernel issue with cf-root kernel la4. Replaced it with a different one and problem solved.
Same problem here, put it down and bottom right corner doesn't respond, pick it up, responds instantly like rest of screen. I thought I had some kind of insecure Note that needed to be held or something. Last few days it was really freakin me out to the point I was purposely putting it down and then pressing and pressing and pressing the back button...nothing...pick it up...works with one slight touch, I was like WTF? What the hell could cause that???
Somewhat relieved to see I'm not the only one with a clingy Note. I'm going to wait and hope ICS fixes the issue, if not I'll guess I'll have to learn how to flash.
Right-hand corner of death
Thank goodness I'm not the only one in the world with this problem.
I first observed the problem when i upgraded to LA1. I was loving the improved battery life like a puppy until i noticed the bottom right part of the touch screen was as dead when placed on a flat surface. It started working again after I had picked it up, making me wonder if it had a "Hey I'm being hand held" feature, but it would still trip out when i'd type an SMS or email.
Called the Samsung service center to ask about it. they said they've never heard of such a problem and that I should just bring the phone in for software downgrading since my Note was ok till I upgraded it. For them, it was a firmware problem so replacing it was not on their priority list.
I ended up downgrading myself to KJ3 (using odin) which works fine. Unfortunately, i no longer enjoy the improved battery life or one-handed keyboard config.
No choice now but wait for ICS and hope it works flawlessly.
Skiddledank said:
Same problem here, put it down and bottom right corner doesn't respond, pick it up, responds instantly like rest of screen. I thought I had some kind of insecure Note that needed to be held or something. Last few days it was really freakin me out to the point I was purposely putting it down and then pressing and pressing and pressing the back button...nothing...pick it up...works with one slight touch, I was like WTF? What the hell could cause that???
Somewhat relieved to see I'm not the only one with a clingy Note. I'm going to wait and hope ICS fixes the issue, if not I'll guess I'll have to learn how to flash.
Click to expand...
Click to collapse
This is definitely a problem with screen. I got mine replaced an hour ago and did the LCD test. The new one is working perfectly fine (with and without flip case).
Try the LCD test . *#0*#.If the test fails get the hand set replaced.
outsyder said:
This is definitely a problem with screen. I got mine replaced an hour ago and did the LCD test. The new one is working perfectly fine (with and without flip case).
Try the LCD test . *#0*#.If the test fails get the hand set replaced.
Click to expand...
Click to collapse
Outsyder,
What software version are you using?
Tried the screen test and mine works flawlessly on KJ3. Since I'm from southeast Asia, I don't have any other updates available except for LA1 which is buggy on my Note.
Hi guys,
My Xperia ZR started behaving abnormally some days back, I put "screentouchtest" app and found that there were random inputs on the phone which made the phone go useless... Check the screen shot attached.
So I tried to make an app that will disable only that part on my screen and I was successful at it... Check screenshot attached. I could then at least use my phone to some extent.
But now the frequency of these random touch inputs have increased and that has made it again go unusable...
Problem is that I made this app as a floating app and whenever user touches other part of the phone , touch below the unblocked area is activated.
SO now I wanted to disable the touch completely over this area...any help will be appreciated.
Sony says it is due to water logging in the motherboard and no warranty will be given.
You are not alone!
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
highevolutionary said:
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
Click to expand...
Click to collapse
If you think its a software problem, i'll try putting some custom ROM.
sourabhp said:
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
Click to expand...
Click to collapse
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Custom rom doesn't help
Engic0 said:
If you think its a software problem, i'll try putting some custom ROM.
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Click to expand...
Click to collapse
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
highevolutionary said:
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
Click to expand...
Click to collapse
May be there is a problem with the touch digitizer under the LCD panel which is misbehaving. No software can fix it. You will need to replace the touch digitizer along with LCD screen as they are sold as single unit. Check online if you can find the parts and ask any local mobile repairer to replace it. :good:
NO Luck with Custom ROM
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Engic0 said:
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Click to expand...
Click to collapse
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
sourabhp said:
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
Click to expand...
Click to collapse
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Engic0 said:
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Click to expand...
Click to collapse
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
sourabhp said:
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
Click to expand...
Click to collapse
lol Okay
SOLUTION!!
Engic0 said:
lol Okay
Click to expand...
Click to collapse
Finally, a solution. Time for a digitizer+screen. Thank you guys.
Hey what is the app you made? I'm in the same boat but can't really afford a new digitizer....
Yep i need it too. It will be greatly appreciated if you share your app here. Thanks in advance.
Sent from my Sparkle V using Tapatalk
sorry guys for late reply!
I am attaching the apk here...
I have this problem too but it only happens if the phone screen get wet
Some time it happen randomly but when i press on the screen at bottom and on led gently it disappear and back to normal
Thank you!
The Float APK solved the major issue of my faulty touch screen in my Nexus 4. There are two lines in my screen where the touch is not working anymore. One of them is having several crazy clicks making my phone somehow useless. By using this app, I can prevent that, which is great!
Two issues I've got:
- the textbox to set the distance from the top is located exactly in the first dead line! So I need to turn my phone sideways to be edit to click there and edit its value.
- when using the phone in horizontal mode, blocked zone turns as well, but the faulty zone is fixed there.
I'm wondering if you might share with us the source code or maybe you consider to make some improvements on it?
Thank you so much for sharing this app here!
thanks for this app solution.
I too have problem of ghost touches. This app definately helps with that and makes the phone somewhat usable again.
The only problem is that some ghost touches are continous (it's like someone presses their finger on the screen and keeps holding it there). This makes action by other touches unresponsive.
Maybe we can find a solution for this in the float app?
Source code for the app
Finally since many of you requested, here is the source code! - Stop Touch - Source Code
Hello guys, so I recently received an MI5 I ordered on Gearbest, in the 64gb international version (MIUI Global 8.2.2.0).
From day one, the touchscreen had the bad habit of going unresponsive randomly, meaning i have to struggle to swipe/click. Using hard keys (home, power) somehow fixes the issue for a few minutes but that's all. I unlocked the bootloader with Mi Unlock, and tried the latest build of LineageOS, and even flashed next the latest MIUI international developper build (29/06). On all of these 3 ROMs, the issue persists (and I went full wipe each time).
At the phone start, it is generally OK for a bunch of minutes, and then randomly becomes unresponsive.
I searched on the internet and did not find fixes, and i'm still unsure whether it's software or hardware related, even though I fear its the second option.
Would any of you have any more information on this subject?
To rule out any possible software issues, I'd flash the latest stable ROM.
Give that a shot and then see if the problem persists.
Well, the phone came new with the latest MIUI Global ROM (8.2.2.0), and since first start the problem was here. In the beginning I thought that it was just the phone lagging while setting up, but as time passed it was still there, no matter which ROM I flashed.
So, is there a potential software fix, or is this an hardware issue?
I am having the same issue, i hope its not hardware related :/
vlatko98 said:
I am having the same issue, i hope its not hardware related :/
Click to expand...
Click to collapse
Unfortunately, I'm starting to think it is, considering what I found on the internet. I'm kinda deceived by Xiaomi, which I thought was great value for the price. There is not even an official statement about this, even though many users reported the issue.
damien2702 said:
Unfortunately, I'm starting to think it is, considering what I found on the internet. I'm kinda deceived by Xiaomi, which I thought was great value for the price. There is not even an official statement about this, even though many users reported the issue.
Click to expand...
Click to collapse
Sadly thats the problem with Chinese phones,some of us that will face this problem's have no protection,we cant return the phone and get a new one,its better for us just to buy a new screen off aliexpress for 20euros than to wait 2 month's to ship it back and wait for it to be fixed and then returned and you pay the shipping costs and also the repair costs,but thats the risk we accept when we want the best bang for the buck.
Also poor quality control on the products to cut the costs is the real reason behind the problems we face
Had the same problem, it got fixed in the latest developer 7.6.29.
mundano said:
Had the same problem, it got fixed in the latest developer 7.6.29.
Click to expand...
Click to collapse
Hi, I indeed tried this solution, even thought it worked for a few hours.. But it came back soon enough
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
please can you make video this help a lot
Hey guys, thanks to Griha3212 I found out on my Mi 5 it's the screw in the top middle part of the phone, the one with warranty sticker. Just loosen it a bit. It works fine after I loosen it. Tried tightening it too and the problem came back.
mi5 unresponsive
mundano said:
Had the same problem, it got fixed in the latest developer 7.6.29.
Click to expand...
Click to collapse
still fixed at these days? now after screen replacement and an update, the touch becomes unresponsive
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
This is still working. Thx for help. Saved my phone after screen replacement.
Which Screws`?
I have the same Problem with my Mi5. Is there anyone who has a Picture for me, which Srews i have to loosen? Thanks
hotdogg1979 said:
I have the same Problem with my Mi5. Is there anyone who has a Picture for me, which Srews i have to loosen? Thanks
Click to expand...
Click to collapse
Hi Guys, I hope my solution helps to solve your problem. It is definitely about the screws. For me, I have found out that one screw is very slightly thinner than the others (of course the one with warranty stick should go to the centre and there is one silver metal going top left). This thinner screw should go up middle. That worked for me.
Does the screws trick work on your phone? Plz tell me.
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
Thank you, you saved my Gemini :good:
Doesn't work for me. I tried with all screws.
Sent from my MI 5 using Tapatalk
screw solution works !!
I tried this solution with Redmi 2 and its the exact same screw which is the problem ie the screw right in the middle of the phone.
i loosed it slightly and now no more screen freezes. :good:
Hi I'm attaching an image with the screws numbered.
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
It would be nice if you post which numbers have you tried.
Richardyii said:
Hey guys, thanks to Griha3212 I found out on my Mi 5 it's the screw in the top middle part of the phone, the one with warranty sticker. Just loosen it a bit. It works fine after I loosen it. Tried tightening it too and the problem came back.
Click to expand...
Click to collapse
Did you mean that, when loosen it, the problem dissapears immediately without rebooting? Because I've tried it and it does not work immediately.
Mamihla said:
Hi Guys, I hope my solution helps to solve your problem. It is definitely about the screws. For me, I have found out that one screw is very slightly thinner than the others (of course the one with warranty stick should go to the centre and there is one silver metal going top left). This thinner screw should go up middle. That worked for me.
Click to expand...
Click to collapse
I think your explaination is a little bit confusing. Did you mean that the thinner screw (the number 1 on the image attached) has to be swapped with the number 2? Or with the one with the warranty (number 5)?
Please if any other one found a combination that works, post it using the numbers of my attachment as reference. I have been tried several combinations amd no one seem to work.