i have an issue with my screen after doing factory reset. now i am stucked at setup wizard, i cant choose language bcoz its unresponsive however the power button and volume button works fine. Do you guys have any idea whats going on with my XT1254, can i fix this just doing flash or should i change the parts?
Related
Hi all.
I'm a bit concerned. All of a sudden the ability of my phone to fix itself by hard reset (L+R buttons > Power on) is gone. This is quite bad.
I can still perform a hard reset via the control panel (erase all data).
Anyone know what's wrong? After the last hard reset the phone wasn't like how it was to begin with at all - or how it was after any of the other hard resets. All of the SE customisation had gone, and only the first 4 panels were available.
How come hard reset isn't a dead cert, and why in the world has the hardware shortcut gone?
Thanks
Mine refused to do a hard reset using the power button + silver buttons, it kept complaining that there was "no image file".
For some reason, using the soft reset button instead of the power button seemed to work on mine, after using the soft reset button behind the battery cover with the two silver buttons it did a proper hard reset and it worked with no problems.
i did 2 hard resets on mine now and i had weird behavior too.
On the first hard reset i couldnt hard reset by pressing the two silver buttons and the power button, just nothing happened. I then tried to press the silver buttons and inserted the stylus into the hole on the back which worked.
As i did a hard reset for the second time method 2 didnt work anymore, therefor method 1 suddenly worked...very weird
mine, couldnt hard reset it by preseing L & R and then soft reset...
i did it by clearing storage in setting!
It happen to me too...I solved it this way
Assign the default to each button left and right and then try it again..
PD: to hard reset trhee botton togheter and then relaese first the power button and wait until screen turn white....
Sorry for bad english
i need help!
mine did the reset ok, but when connected to sony ericsson's ipdate service keeps flashing 'no image file' and the update service says device not recognised. any ideas how i can fix it?
I have a slightly different problem. x1 to cleanse his memory, I was enabled very strange program that was the code'1234 'and when I did it my X1 phone simply shuts down. When I start up back, I appeared on a white screen with a blue stripe on top, and in the middle of the screen wee dagger. I've tried all the ways to retrieve the telephone to life but nothing is party, and the Internet also can not find anything. Please help.
@ thomsonss1: try a hard reset. That should work. Report back if it doesn't and we'll think of something else
Noooo it's not working.... I even can't to put a pin code or mobile code....
it suck......
I am also having the "No Image File!" issue. Has anyone fixed their phone or am I SOL?
my Diamond don't boot after rom update and hard reset. update goes to 100% and no problem but now when i turn on i only see the splash scree that say's "Touch Diamond". Can i solve this?
To enter triggered bootloader mode, you need to take the back off of your phone so you can access the reset hole. Then, you need to simultaneously press the power button, volume down (-) button, and the arrow button (<--) while at the same time, pressing your stylus into the reset hole. I know it sounds nearly impossible, but I am able to do it using two hands for the buttons, and pressing the stylus into the phone with my stomach. Sounds crazy, but it's pretty easy once you've done it a couple of time.
Or get another person to help you with the button pushing..
It's Solved
I have some problem
Can i solve this?
It's Solved
I tried to bootloader mode, recording about 10 different times, Rome and finally came out
Hey guys
how are ya,
i'm having some probs with ma Diamond
first the hardware buttons suddenly stopped working
except the home and call buttons
second, after few days the battery started to run out very quickly
it just remains for half a day and have to recharge.
whats da problem
please HELP>>>
Fanx very much
Hi,
Back up yr data and give it a hard-reset first before trying anything else.
Awaiting feedback...
themohd said:
Hey guys
how are ya,
i'm having some probs with ma Diamond
first the hardware buttons suddenly stopped working
except the home and call buttons
second, after few days the battery started to run out very quickly
it just remains for half a day and have to recharge.
whats da problem
please HELP>>>
Fanx very much
Click to expand...
Click to collapse
you have to do is to hard reset the device and set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset. To perform a hard reset
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and
ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen: 4. Release the VOLUME DOWN and ENTER buttons, then press the
VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset. after the hard reset process is completed, make sure you go to the boot loader menu (screen 3 colors) and then reflash with the official ROM for your device Good Luck
Here's the problem with my HTC HD7, I have used it for sometime and today I did a reset going to settings->about->reset. The phone came back straight to the home(tiles) screen without starting through the Windows setup screens. It then restarted by itself and after that it is pulling back all of my old contacts, old messages & mails. I also did a factory reset using the Volume Up/down & power buttons but the same story.
Anyone think of what's going on? do you think the internal memory corruption or something?
thanks in advance,
TZ
could try this......
Resetting using the hardware buttons
You can also use the buttons to perform a hard reset. This comes in handy if the screen is frozen and you can’t access the phone.
1. Turn the phone off. If it’s frozen or unresponsive, pull then replace the battery.
2. Press and hold the Volume Up and Volume Down buttons and power the phone back on.
3. Continue to hold Volume Up and Volume Down until a factory reset screen appears.
Hi, I met the weirdest thing I ever have. I have a galaxy camera gc100, It works very well without any problems. Since I decide to lend it to my friend, I did a factory reset. After the factory rest, everything looks fine and the initial setup screen "Select language" appears. BUT, I can not touch anything on the screen. It seems that the touch is simply unresponsive at all until the screen turns off by timeout. And then I tried hard reboot, go to Maintenance boot mode by pressing power and zoom out and did delete cache and factory reset again. But none of them works. This is just weird and I can not find anyone on the Internet having the same issue as me. Other people met unresponsive touch screen and then did hard reset to fix the issue. Mine is entirely opposite. I don't have any problems, but factory/hard reset causing the touch screen is unresponsive at initial setup screen. Do anyone have any clue how I can workaround this issue? Thanks a lot.