Related
I've been experiencing random reboots since I bought my Developer Edition but today I think it hit me real hard with the random reboots in short intervals.
this kind of reboots happened to me both on completely stock and custom rom but today heavy reboots occurred when I was on Insert Coin 2.0.3 (S-Off).
According to someone's advice, I installed catlog and try to record the events until the phone reboots. So I post my logs here and hope some one could save me from this misery.
the first file was recorded with "write to disk every 200 lines" so it may miss some very last event when phone rebooted. The next ones were recorded with "write to disk every 100, 20 and 10 lines". I hope some devs could have a clue on what is happening with my phone.
I also save the log file AFTER phone reboot but they were too big to attach. If you think those might helo, I'll post them somewhere else.
Might be something to do with Xposed
BenPope said:
Might be something to do with Xposed
Click to expand...
Click to collapse
Yeah, I've noticed that some custom ROMs got issues with Xposed on S-Off device. However, as I mentioned earlier, this happened to me while I was on completely stock rom, too.
I've made a few observations and found out that I haven't got a single reboot on AOSP for a whole day but AOKP still gave me random reboots (not as frequent as on InsertCoin but still).
Any help would be very appreciated
might be worth trying to install sense rom again stock or custom and do full wipe, cache and dalvik. strange that an aosp rom works fine. must be something caused by a sense rom, drivers or framework. was this problem introduced when you started using 4.2.2 roms? have you updated to the new firmware.zip?
well, my habit of installing new roms is always do a full wipe so I think the cause of reboot should not be related to that.
After getting no reboot on AOSP roms (carbon, cm 10.1), I decided to go back on custom sense roms but no luck. reboots just came back no matter what roms I was on (renovate rev 45, insertcoin rev36, rayglobe 4.3).
I went to stock again with RUU dev edition (.16 one). Phone gave me a reboot right after I finished setting up (as new phone). However, it has been running stable up to now (3 hours).
Should the reboot have any thing to do with Sense, i'm wondering. I would be very thankful if any devs can help me on this issue. I'm willing to make as many logs as required or install any custom, stock roms if neccessary.
Sincere
Hello everybody,
I've spent the last 2 hours browsing the forum looking for appropriate answers. There seems to have a bunch of people with similar issues, butI haven't found any useful hint...
So my problem is that every few days my Galaxy Note freezes and then reboot sticking at the initial "Samsung GALAXY Note GT-N7000". I can however boot into recovery and restore the latest Nandroid backup. My phone correctly boots then (which seems to exclude any hardware cause btw)... until next time a few days later... It's not quite blocking as I have kinda workaround... But you may still imagine how convenient it is to restore the phone while waiting for important calls! I have also noticed that the date is reset to January, 1st 2000 when it occurs.
I am suspecting that some application upgrade screws the system up. But how could I identify which one? I have nearly 200 apps... uninstalling them one after another is no realistic option.
So my main question is: is there any way to log the events on the external SD in order to diagnose what was happening before the crash (and potentially caused it).
Of course if any of you had the exact same symptoms; I would also be glad to get any feedback from your experience.
In case it helps, here is my configuration:
- galaxy note N7000
- Firmware: N7000XXLT9_N7000XXLT3_N7000OXXLT3_HOME (Stock 4.1.2)
- Kernel: PhilZ-cwm6-XXLT9-ORA-5.11.2 (rooted)
Thanks in advance for any appropriate support,
Regards,
Didier
Myself and many others who have upgraded to sweet rom v11 have experienced the same issue. It comes with the latest philz kernel.
I have since changed to c.o.h hello world's latest kernel and am yet to experience the issue or a random reset (something that was a hourly occurrence after the upgrade. it's been stable for 3 hours now)
A-mak said:
Myself and many others who have upgraded to sweet rom v11 have experienced the same issue. It comes with the latest philz kernel.
I have since changed to c.o.h hello world's latest kernel and am yet to experience the issue or a random reset (something that was a hourly occurrence after the upgrade. it's been stable for 3 hours now)
Click to expand...
Click to collapse
So, according to your statement, my problem would be related to the Kernel and would presumably be solved by loading a new Kernel.
Which one would be recommended to support the following features?
- ext4 partition for use with Link2SD
- init.d
- root and CWM (I guess all alternate Kernels do support it; but anyway...)
Thanks in advance for your help.
Q&A for [ROMS][SGH-T679]Mass CM Thread
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I noticed that the kernels are linked separately from the ROMs. Am I supposed to download and flash the kernels separately? I've flashed about half a dozen ROMs, but I've never flashed a kernel before. From what I've read, though, it sounds like following the same procedure. How about GApps? Do I need to download and flash those, too? And, if so, which pack should I use?
fajrero said:
I noticed that the kernels are linked separately from the ROMs. Am I supposed to download and flash the kernels separately? I've flashed about half a dozen ROMs, but I've never flashed a kernel before. From what I've read, though, it sounds like following the same procedure. How about GApps? Do I need to download and flash those, too? And, if so, which pack should I use?
Click to expand...
Click to collapse
Roms come with a kernel the kernel linked is just special some have overclock under volt etc etc.
Explains the kernel options.
If you do flash them do it after rom.
Gapps you dont technicly have to but yes. (for a standard setup flash gapps)And there should be a gapps linked at the start of rom. If not there will be soon.
Can't import contacts from SIM
Thanks! That clears up a lot.
I installed CM, and it looks very cool and smooth. But when I tried to import contacts from my SIM card, it said "No contacts". I thought maybe it was because I hadn't installed GApps, so I downloaded the "small" GApps package linked from the CM wiki and installed it from CWM. Still no contacts on the SIM card. Next, I thought that maybe my contacts actually weren't on my SIM for some reason. So, I booted back into CWM recovery and restored my previous system. Then, from the phone app, I went to Import/Export > Manage SIM card contacts. Sure enough, all of my contacts were there.
It seems like CM isn't reading my SIM. Any idea what's causing this?
Edit: Never mind. I found out that newer versions of Android don't allow you to store contacts locally. Somehow, the contacts got silently added without me having to import them, though. That's odd, because I don't remember allowing Google to store them in the cloud, and the SIM card appears blank... Oh, well, I installed MyLocalAccount, so I'll see if I can store the contacts locally that way.
@cars1189 running 10/18 build with 10/19(PAgapps micro) and 9/9k^k UV vhm kernel and have had no issues! Thanks for the great work, this runs solid and smooth!
I recently installed 10.2 and am loving it so far. One thing I ran into though was that the cLock widget was showing lots of wakelocks, so I disabled it and battery life has been great. Haven't run into any other issues (other than the screen staying on when off and charging), so this one is a keeper for me.
Didn't see this problem with 10.1, so curious if this is a known issue or not with the cLock widget? Also, are there any other planned updates coming for 10.2?
Thanks.
@RobbyG2112 I noticed it too when I was on 10.2 how ever I only ran it for a week maybe b4 going to cm11 I will say not sure if cars will update 10.2 but if you haven't tried cm11 its super stable and gets updated monthly!!
Thanks for confirming canodroid15, I wasn't sure what the lock screen would show when I disabled the widget but it put the default digital clock and date in it's place so it works out ok. I had disabled the weather and alarm widgets also so wasn't sure why having only the clock widget would cause wakelocks.
I'll probably get around to installing CM11 next, I'm a little slow on upgrading. I had been using CM10 for a long time and finally got tired of seeing the green preview pictures every time I used the camera so decided to go to CM10.1/10.2 recently.
Sure man, about the wakelocks you can try to catch it in a log. Enjoy 10.2 bro!!
kernel for cm11 (SGH-T679)
I recently installed @cars1189's CM11 10-4-14 build for the SGH-T679, with kernel 3.4.104-cyanogenmod-gda4bf58. It took a few tries, but it finally succeeded.
However, there's a slight issue in that I can't access my SIM card contacts. When I try to import from the dialer, it says "no contacts." I've searched around these threads and on the internet, and it seems that it is an issue with the kernel. Would it be possible for someone to recommend or point me to a compatible kernel that would fix that issue for me? Thank you so much for your help!
@valmeras I really don't think it has anything to do with the stock cm kernel but if your on 10/4/14 you can flash 9/9k^k kernels safely on that build about sim contacts idk I use my Google account to sync my contacts hope this helps good luck!
Edit: look for the rom & kernel dates/links in OP.
@canodroid15 - thanks for the response and suggestion. I'll give that kernel a try in the next few days. Not sure this is the solution, but hopefully that works. I've also seen some reference to SIM Tool Kit (STK), but I wasn't able to figure out if it that was the issue.
I would definitely use Google for syncing the contacts once I get this fixed, but for now, that's not possible because my phone is not able to read the SIM properly. I've tried saving a contact to the SIM, but I get an error like "unable to write, SIM is full" but I know for sure that's not the case. Alternatively, I might try to revive my old dumb phone and try to retrieve the contacts that way, then hopefully export that in some way.
@valmeras no prob man, if you have contacts on your sim and u put the sim in the dumb phone and export to storage u could then send a vcard via Bluetooth to the exhibit go into contacts and import from storage then Google sync good luck let me kno if u get it
So I flashed the kernel, but that didn't fix my issue. I do have some more free RAM now though
My old phone doesn't support exporting multiple contacts/vcards via bluetooth, but fortunately, Motorola has a contact exporter utility that exported everything into a CSV file to my laptop via USB. I had to install the drivers for the old phone to be recognised first. I was skeptical it would work given it was a new all-in-one driver thingie and my Motorola was quite old, but somehow it did! The whole process took several hours, but my contacts are now synced!
Sensors/rotation problem
Thanks for posting these ROMs! I just upgraded from Peach Sunrise and I'm really impressed with how well CM11 runs on this phone.
I want to report a problem I had and my solution for the next guy's benefit. With the latest 12-9-14 CM11 ROM, my sensors and compass didn't work correctly. The biggest symptom was auto-rotation did not work at all. Downgrading to the 9-9-14 ROM fixed everything. I didn't try any other ROMs, so they might work too.
Question about getting Google apps running on a SGH-T679
I installed CM 10.2 (cm-10.2-20140627-UNOFFICIAL-ancora_tmo) and it worked fine. I tried a couple different gapps downloads (doing a reinstall of CM10.2 between tries although I may have done that step incorrectly). But no matter what 4.3 gapps build I tried, Google Play Services would crash.
My main goal is to get to 4.3 or higher, so CM 10.2 or CM 11 would be great. (I'm open to other ROMs too. The only reason I'm choosing CM is because those are the only ROMs indicated as still maintained here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G )
My question is whether anyone has either CM version running on a T679 and which gapps did you use? I nearly bricked my phone and would like to know that someone else has gapps running okay before I try again.
Thanks!
EDIT: I followed the 2 following threads to install CM 11 with the PA pico gapp package and added a few other Google apps manually from the Play store. I also made sure to reboot several times to make sure everything got fully initialized.
http://forum.xda-developers.com/showthread.php?t=2542793
http://forum.xda-developers.com/showthread.php?t=2397942
masteff said:
Question about getting Google apps running on a SGH-T679
I installed CM 10.2 (cm-10.2-20140627-UNOFFICIAL-ancora_tmo) and it worked fine. I tried a couple different gapps downloads (doing a reinstall of CM10.2 between tries although I may have done that step incorrectly). But no matter what 4.3 gapps build I tried, Google Play Services would crash.
My main goal is to get to 4.3 or higher, so CM 10.2 or CM 11 would be great. (I'm open to other ROMs too. The only reason I'm choosing CM is because those are the only ROMs indicated as still maintained here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G )
My question is whether anyone has either CM version running on a T679 and which gapps did you use? I nearly bricked my phone and would like to know that someone else has gapps running okay before I try again.
Thanks!
EDIT: I followed the 2 following threads to install CM 11 with the PA pico gapp package and added a few other Google apps manually from the Play store. I also made sure to reboot several times to make sure everything got fully initialized.
http://forum.xda-developers.com/showthread.php?t=2542793
http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
Hey man! I hope you got it figured out! The only Gapps I use are PA Gapps! There are others but PA is the most complete package & has many options "IMO". You need to use a package that will fit your phone I use the micro package, or the nano. You need to use a package that matches your ROMs version, if your on 4.4.x then use 4.4.x Gapps. If on 4.3 use 4.3 Gapps. PA Gapps has a 4.3 package but its hard to find if you don't know where to look. 4.3 package can be found in the devs (Tkruzze) files on android file host, same place as the 4.4.x Gapps! Sorry if you didn't get answered b4 this I haven't been on this thread for weeks it seems! Hope this helps
So I've been trying out the CM11 OS2SD ROM (the last one in December), but I need to switch back as the bugs are just too much. I need my phone to work and stay charged, which is not happening on this ROM. And since it looks like CM12 is being worked on now that it's not likely the bugs in CM11 OS2SD will get fixed any time soon.
So first the problem. My USB socket on the phone is a little iffy, so I know that is where most of the problem is coming in. However, on the CM11 OS2SD ROM I'm using right now (the one dated 12/25) it frequently says it is plugged in, but is not charging. I've actually seen times where the battery monitor I'm using shows it has discharged the battery as much as 20% before I caught it, yet the status bar battery icon shows it as full and plugged in. On the older ROMs it didn't do this, so something isn't right with how the ROM handles the charging circuits in the phone. Plus, I've had frequent periods of "cpu hogging" (massive CPU load that doesn't seem to come from any one source and that doesn't seem to show up in OS Monitor) that can end up in a crash-reboot of the phone.
So as a result, I want to switch back to an older version of the CM11 ROM. I was using one of the November builds for quite a while, only having to put up with an occasional crash-reboot (the current ROM seems to do this at least every other day, the older one could go a whole week and maybe have it happen only once). What is the process to undo what was done to the phone for the OS2SD build to be loaded?
can't install
I have a problem after installing it via cwm and rebooting, the ensender shows me a screen where I order a factory reset but when I was I do not ensiende the phone
CM 12 Android is upgrading every boot
Ever since I flashed Cyanogenmod 12 every time I reboot it says "android is upgrading optimizing app 1 of 1" and it takes about 8 minutes. There are no odex files in data/app so that cant be the problem. Someone please help. The first time I flashed CM 12 I wiped data and factory reseted but since i seen this happen I flashed Cm 12 again but this time I formatted System, Data, Boot, and SDcard 0 but it still seems to happen. Also, recently my phone has been shutting off by itself every time I turn off the screen. And I know this isn't a hardware problem because the phone never turns off while music is playing with the screen off. It didn't start happening with CM 12. It was already happening with CM11 but it only started happening about a week ago. Im really thankful for cars1189 working on the rom and anyone else who worked on it. You guys are great. Hopefully you can help me out.
Hello everyone. I am opening this thread for the sake of convenience of us users of this ROM so that we stop hijacking the Oreo version thread and have a "clean" place where we can discuss about our experience with this great ROM. So I suggest anything regarding this ROM to be posted here!
You can find the official builds here: https://get.resurrectionremix.com/?dir=hammerhead
DISCLAIMER: I am by no means a developer or maintainer of this ROM, so this cannot be considered an official support thread, just conversation, plain and simple! Moderators can close this thread as soon as an official support thread opens.
Cheers!
I just installed the rom,came from stock. My first impressions are:
-It took 2 reboots to get the camera working. Installed google camera app since the integrated one doesnt show up on app drawer(you can access it from lockscreen though) and it seems to work kinda bad(picture goes black on it sometimes).
-It runs a bit hotter than stock rom. It might be just me though,I have opened the phone a few times to fix the power button which seems to get stuck for me once in a while.
-The default DPI doesn't seem right,everything looks a little bit smaller than it does on stock rom. There is an option to change it though, I set mine to 380 and it looks about right.
I haven't found any other issues yet.
Another note,I think the rom fixed my notification led lol. It didn't work for me on stock rom for some reason.
Pretty good rom overall,I haven't faced any stability issues yet.
edit: Is there any way to lower the resolution?
I upgraded from RR's Oreo build. Before flashing I repartitioned the phone using the method described here and the even more detailed instructions posted by douguluskaien on page 12 of that thread. The flash went very smoothly and although the phone initially ran hot it cooled back to normal after a few hours of what was probably background processing. With the 1.5G system partition I was able to install the micro version of GAPPS. I've had that experience after flashing new ROMs on other phones as well. I also discovered the bundled camera doesn't work and installed Google Camera. After starting up Google Camera, the original camera worked also. I tried connecting bluetooth headphones, and even though I could pair the headset I couldn't get the phone to send audio - it just kept playing through the phone speaker. I also found the default font size a little small, but changing it to Large in the Font Size menu got it back to what seems like normal.
I have one major issue which I realize is not directly related to the ROM. A custom version of TWRP is required to support the non-standard partitions, and that version is based on TWRP 3.2.3 and doesn't support device encryption. Does anyone know if an updated TWRP will be available that will allow me to encrypt the phone and still do recovery-related stuff?
In summary, this is impressively well along for a build that's only been live for a couple of weeks. This isn't my daily driver so I don't need absolute stability, so this is plenty for me for now. I just won't leave the house with it until I can encrypt.
I've been using this ROM for about a month now as a daily driver, so here's my feedback:
ROM is very nice and smooth and feature rich (as expected for RR). I installed it with Opengapps nano, rooted with Magisk. It works very well with the Pixel launcher I grabbed from here.
Some drawbacks I noticed:
Battery life is rather bad. I get 1h30m SOT at best with very mild usage (mostly site browsing and a little bit of social apps and YT video watching) . Then again I am still using the 5yr old battery that came with the phone...
The phone runs very hot (too hot to hold!) after using it for some time. It cools down rather fast if you let it be for a while, though.
Sometimes the camera is crashing (the notorious "can't connect to camera" error). usually a reboot fixes this.
Sometimes it takes a while for the device to wake up after pressing the power button.
I got some soft reboots under device heavy load. Mostly I get them when using the Rocket player music app, and it tries to load a large music folder. Phone freezes, then soft reboots.
SElinux is set to permissive and the build is signed with test keys. Maybe the first thing is caused by the latter, I don't know really....
Overall, it is a good ROM with room for improvement. However, I am concerned about its maintenance status. No update since May 14, so I keep my fingers crossed.
New build (28/07) uploaded!
hammerheadache said:
New build (28/07) uploaded!
Click to expand...
Click to collapse
I am not able to install it giving me ERROR 7
hammerheadache said:
New build (28/07) uploaded!
Click to expand...
Click to collapse
Do you know about change log??
What features added?
I want to update it tonight
As I state at the first post, I am not a developer, neither I have any involvement in this project and the people behind it. So I can't provide any support apart from my experience as a user.
sacmat said:
I am not able to install it giving me ERROR 7
Click to expand...
Click to collapse
I didn't flash this build so I don't know if it works or not. I have switched to a different ROM. However, could you elaborate? Do you come from another ROM? Did you dirty flash? Is your device repartitioned? Usually error 7 in TWRP means there's not enough system space...
m.morcielago said:
Do you know about change log??
What features added?
I want to update it tonight
Click to expand...
Click to collapse
I do not see any changelog file on the download page. Unfortunately with no official support thread, there are no official answers as well...
I flashed this build this morning by dirty way
Unfortunately Bluetooth is not working
It can find the other devices but can not connect to them
1- How can I fix it?
2-How can I downgrade to previous build?
hammerheadache said:
As I state at the first post, I am not a developer, neither I have any involvement in this project and the people behind it. So I can't provide any support apart from my experience as a user.
I didn't flash this build so I don't know if it works or not. I have switched to a different ROM. However, could you elaborate? Do you come from another ROM? Did you dirty flash? Is your device repartitioned? Usually error 7 in TWRP means there's not enough system space...
I do not see any changelog file on the download page. Unfortunately with no official support thread, there are no official answers as well...
Click to expand...
Click to collapse
Thanks for the idea, I had just repartitioned, so I had format my entire phone, (before that i had taken the backup ), and I had successfully installed the rom, I got an strange issue of WIFI connectivity, as I am not able to connect to my wifi which is having Hidden SSID, but i am successfully connected with the hotspot from my another primary phone. i haven't tested the bluetooth yet.
I dirty flashed the new build this morning. Haven't tried bluetooth or camera yet, but Wifi is working fine. As usual, the phone heated up for about a half hour after the flash and then the temp dropped and stabilized. Battery life is not great, like the May build, and there is often a long delay responding to the power button, especially shortly after power-up, but the build seems pretty solid.
Casting isn't finding anything to cast to in the most recent build. Camera worked fine.
New build available (Aug 4) as seen at ROM's dl page.
Bluetooth pairing now working for me on last release
Hi installed this ROM in clean maner but i got intermitent issue with sim card. Not sure if it is only sim issue or reboot but phone ask my pin code.
Looks like @voidz777 is the maintainer for RR Pie as well:
https://github.com/ResurrectionRemix-Devices/api/commit/8388c5df5069cf04df04facbdc22a2bfd8890185
New build (09/08) in case someone missed it... Link in OP
sacmat said:
I am not able to install it giving me ERROR 7
Click to expand...
Click to collapse
okay so to fix this you will have to repartition your system.
This thread will help you. https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Repartitioning is the fix to error 70 while flashing gapps as well as error 7.
New build (Sep 16) available! Link in OP.
princeknockouts said:
okay so to fix this you will have to repartition your system.
This thread will help you. https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Repartitioning is the fix to error 70 while flashing gapps as well as error 7.
Click to expand...
Click to collapse
Thank you for the tip, I followed the thread and was able to install RR 7 without any trouble. This might not be the right place to ask, but would you have any info on how to install SuperSU on RR 7, or is there perhaps another root method that we must use? Thanks in advance, I can't seem to find information on it anywhere and rather than continuing to bang my head against the wall I thought I'd ask.
Hi guys,
I'm a bit concerned about my mi8. Since several weeks now the phone is getting so slow to boot, even into recovery mode !
For exemple, today before starting to see the havoc logo spinning I count more than 20 spins. Months ago it took only 5 or 6, 2 weeks ago : more than 8... Etc.
When phone is started first apps tha usualy open really fast (Viper4fx, gsam battery monitor, magisk notifications) are so slow to open. Some other apps same thing the moment I open them.
What do you think about that ? At first I thought my battery is dead. It charges as fast as usual. Discharging is like before I'd way. Not worst for sure So I hope Its nor that.
I'm using battery charge limit (the app, nor from havoc sertings) to stop at 81% and charge it always when the minimum reaches 40%. So for battery life I think I'm doing things well.
I'm still on pie. Please, see the attached picture to look at my version.
I'm wondering what could cause this big issue.
I'm used my make lot of backups with twrp 3.3.1-1. Sometimes 2 per days, sometimes none in 2 or 3 days and so from the day I unlocked the phone and installed my first and only rom : havoc. Sure I installed several updates but no other ROM and I stopped updating it cause it worked really as I expect it should. So...
Also, making twrp backups are Soooo slow. Generaly it tooks depending of the size, between 90 sec and 140. Now it takes more than 6 min !!
So before doing a last backup and do anything I wanted to ask what you all think about that before doing a clean install update/upgrade.
Do you think it worth the try ?
I tried to clear caches (both) in twrp. Nothing :/
I'm afraid I killed my phone memory or battery. Don't really know.
Last thing, maybe an important one but don't know why it would... I installed notify & fitness and sleep as Android for my mi band 4 and I noticed my phone getting slow during this period. About N&F it was on 12.27.2019.
The firmware was updated way after that issue... And of course I cleaned all app caches manualy, not using some weird app to do the job.
Sorry me for this long SOS, and please forgive my bad english. I'm starting to being crazy. OK, the phone works but oooh boy, Its slow.
Cheers
Your rom software is out of date. if you truly want the best experience on a daily basis. There is no doubt in my mind that Xiaomi.EU is still the absolute best experience overall.
It is light years better than the Global stock Rom, all of the bloat has been removed and it has some of the Pixel AOSP features integrated into the Rom. but yes it's still miui. For me that is a good thing because I am a fan. It sounds like you have never tried Xiaomi.EU so give it a shot. I guarantee, that if you keep it installed for a few days, you will not want anything else unless you are just bored. Wait until the new update comes out, it should be late today or tomorrow. by the way, you will average about 7.5 -8.5 hours SOT.
On the other hand, if you are content with Havoc, then migrate to the latest, Its pretty great but the battery SOT time is bad right at 4 hours. This can be improved by changing the kernel. I tested the LawRun_x5.0-60hz kernel and it improves SOT to 5.5 hours, and the OS gennnerally runs better. Other Roms are also good, but lack the abundance of features that Havoc has. A comparable heavily feature rich rom is CRDroid.
If you want to stay on your current rom, then clean your caches, and at least upgrade the kernel. That alone may be enough to improve your recent performance. i dont think you phone is going bad. You likely just have some corruption, or too many processes running in the background.
@tsongming Hi and cheers for replying.
To start, I forget to mention that I'm using a global version.
That being said, I did clean all caches including from all my apps. Manualy of course.
I did use Xiaomi MIUI for very long time. Since I got my first Redmi Note 4. As you well said, I did switch to custom ROMs for what you said.
Regarding SOT... And the reason why I didn't update anything on my Mi8 its because with this version of havoc and this kernel. Gsam bat monitor tells me now : 9h41 (5h58 Max) and before my issue it was 11h !
So, to answer you : before asking here I also trying to update the Rev kernel but lot of things didn't work anymore. Like unlock the phone with my fingers and I think its pretty much normal as Havoc as evolved so kernel did the same and is not compatible with older version I think. At least, mine...
Honestly I tried lot of things to make my havoc super speed, smooth with a great battery and I was happy with that
I do hope I answered to all your questions.
I don't know what to do cause I'm not 100% sure that starting from clean MIUI or custom rom will fix it. What if not ? I'll "forced" to reinstall "everything" (I'm aware of backup apps but dont wanna use them) even if I saved all important stuffs
And if I badly revert to the last MIUI (I never reinstalled MIUI after a custom ROM. I know there is good tuto, but...) I could break it and I'll loose everything. For now it works, slowly OK ^^' but I rather that than taking a risk and found what is the cause of my problem.
Erpe7 said:
@tsongming Hi and cheers for replying.
To start, I forget to mention that I'm using a global version.
That being said, I did clean all caches including from all my apps. Manualy of course.
I did use Xiaomi MIUI for very long time. Since I got my first Redmi Note 4. As you well said, I did switch to custom ROMs for what you said.
Regarding SOT... And the reason why I didn't update anything on my Mi8 its because with this version of havoc and this kernel. Gsam bat monitor tells me now : 9h41 (5h58 Max) and before my issue it was 11h !
So, to answer you : before asking here I also trying to update the Rev kernel but lot of things didn't work anymore. Like unlock the phone with my fingers and I think its pretty much normal as Havoc as evolved so kernel did the same and is not compatible with older version I think. At least, mine...
Honestly I tried lot of things to make my havoc super speed, smooth with a great battery and I was happy with that
I do hope I answered to all your questions.
I don't know what to do cause I'm not 100% sure that starting from clean MIUI or custom rom will fix it. What if not ? I'll "forced" to reinstall "everything" (I'm aware of backup apps but dont wanna use them) even if I saved all important stuffs
And if I badly revert to the last MIUI (I never reinstalled MIUI after a custom ROM. I know there is good tuto, but...) I could break it and I'll loose everything. For now it works, slowly OK ^^' but I rather that than taking a risk and found what is the cause of my problem.
Click to expand...
Click to collapse
The current version of Havoc already uses the Revolution kernel, and its part of the current problem so use something else. The Law kernel that I mentioned is extremely good. but so are the others latest release such as Mipa and Twisted. and no fingerprint issues with these kernels.
As a longtime user you do know that anytime you switch the kernel that you should remove all passkeys, screenlocks, face unlock etc.? This could explain the slowness, you have encryption issues.
Android 10 is much improved over pie, except for the battery 11 hours SOT is unheard of on Android 10. Except for 1 guy claiming 11 hours on the ION rom. I tried the rom and it is good. but I am only getting 7 hours Sot, and the Rom is like Lineage, just the basics. No fingerprint issues.
You truly need a full clean install, including formatting storage. just backup your files first.
Xiaomi Miui? Did you mean Xiaomi.EU? if not Xiaomi.EU , then you really should try it, you wouldn't know from a past experience. This is Miui 11 on Android 10 and its flawless.
thx again @tsongming
Yep, I note all what you said to me. But to be honest last year anytime I switched from kernels to kernels I never had to reset screenlock etc. Last year cause as I said once I found the kernel which suits me I stuck with it.
So I can state its note related to that cause I didn't change it since month trust me, just tried the last kernel one or week ago to be sure if it was the cause or not. Just installed and uninstalled apps since.
look at this screenshot you'll see what I meant about SOT which was better month ago. :/ Maybe I didn't explain well...
I'm not against trying any roms including xiaomi.eu perhaps (I do have links for this I think but any link is appreciated just in case. I just download the lastest stable 11 from xiaomi.eu if its what you have in mind) but I want to be sure if it'll fix what I'm facing. You know ?
I'm afraid that doing a clean install with any rom won't fix my beautiful Mi8 ^^
Erpe7 said:
thx again @tsongming
Yep, I note all what you said to me. But to be honest last year anytime I switched from kernels to kernels I never had to reset screenlock etc. Last year cause as I said once I found the kernel which suits me I stuck with it.
So I can state its note related to that cause I didn't change it since month trust me, just tried the last kernel one or week ago to be sure if it was the cause or not. Just installed and uninstalled apps since.
look at this screenshot you'll see what I meant about SOT which was better month ago. :/ Maybe I didn't explain well...
I'm not against trying any roms including xiaomi.eu perhaps (I do have links for this I think but any link is appreciated just in case. I just download the latest stable 11 from xiaomi.eu if its what you have in mind) but I want to be sure if it'll fix what I'm facing. You know ?
I'm afraid that doing a clean install with any rom won't fix my beautiful Mi8 ^^
Click to expand...
Click to collapse
You posted a question asking for help, but then you dont want to try anything because you tried things before. Yes, its true that Magisk is sometimes persistent, but it depends on the release. it is safer to remove the passkeys.
But if you really think about it, what would cause the phone to cool down, ignore the battery stats especially from Gsam it's often very wrong, I use it too, for years and in your case you are getting good SOT because you have a zero % for the phone. It's almost like a Sim card isn't installed? Every rom will provide extremely fantastic SOT when a sim card isn't being used. If you have an active sim card then something is wrong with the monitoring because Gsam is showing 0%, it should show something even if you havent made a phone call for days.
Do whatever you want it's your phone:
I still think that you have encryption or corruption issues and its bad enough for your to make a post about it. FYI : The battery dying doesnt slow down the phone. Yes, some stock roms, notably Apple intentionally by choice changed the kernel core settings automatically on aging batteries. Hence the huge controversy a couple of years ago, that isn't happening to you.
A dying battery doesn't slow down the phone, evn cold solder joints do not slow down the phone, they keep a phone from booting to system and to recovery. The only thing left is corruption or thermals, which on this phone good luck editing thermals because they are mostly encrypted. The remaining possibility is corruption, post your log files and lets see what's actually going on.
Again, what would slow down your phone even in recovery?
It's always thermals, or corruption. Slow to start up, even in recovery.: We can rule out thermals unless your battery temp or cores temps are extremely high. This leaves corruption. if its slow while booted into the system, then you may have apps or processes crashing and you are not aware of it. If that is true, then eventually the phone may stop booting up altogether. If its thermals causing overheating you should truly resolve this issue immediately before actual heat damage occurs. Did you ever flash display refresh rate mods? If so your DTBO partition could be the issue....corruption.
Use this program to provide an app list : https://play.google.com/store/apps/details?id=de.onyxbits.listmyapps ( Weed out any unknown programs that you may not realise are installed. Post the list along with complete logs. Once you see these crashes, that I am sure the logs will show: Do as I suggested earlier: wipe and "format" your phone. Then later use best practices and remove passwords before changing kernels
Cheers. I'll try what you suggest.
I might have some questions in the future regarding format and some other things.
Never flashes display refresh rate and never noticed any overheat issue on my phone.
Sure, I'll do something like you said as soon as possible.
PS : you said "before remove passwords". You mean in the parameters of the phone like schema/diagram, pin, etc ?
Cheers
Erpe7 said:
Cheers. I'll try what you suggest.
I might have some questions in the future regarding format and some other things.
Never flashes display refresh rate and never noticed any overheat issue on my phone.
Sure, I'll do something like you said as soon as possible.
PS : you said "before remove passwords". You mean in the parameters of the phone like schema/diagram, pin, etc ?
Cheers
Click to expand...
Click to collapse
You could remove password under data/system/locksettings.bin But it's better to just go the settings//security/ *.* < remove whatever you have setup : prints and face unlock first before, pattern or pin.
Another good practice for Android 10, should you go there is :
Extract the boot image from the rom
Place it inside the downloads folder.
When ready to flash root, patch to the boot image first, ( this links the existing system binary credentials into the boot image)
Boot to recovery flash boot to boot
Then flash magisk > then boot to system and you will have no issues whatsoever with root.
Afterwards, if you decide to flash different kernel, Magisk is more likely to stay stay persistent.
I hope everything is good from this point forward take care.
@tsongming Thanks for reminding me the locksettings.bin thing because I used it once on my old phone and I forgot that.
Never installed 10 yet. But I take carefuly your advice.
Hello!
Did you fix it? Because it's happening to my Mi 8 too. It's exactly the same issue, the phone takes a long time to boot up, to open apps and even to boot into TWRP
I have that issues on my mi8
I had this problem with me before and I solved it by flashing the last official ROM, Now the problem happened to me again and I do not know what is the reason behind it @tsongming
Sent from my MI 8 using Tapatalk
ahmadbasher011 said:
I have that issues on my mi8
I had this problem with me before and I solved it by flashing the last official ROM, Now the problem happened to me again and I do not know what is the reason behind it @tsongming
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
I recently had some issues with my phone as well. I was able to get my phone back to normal functioning by flashing the latest stable fastboot rom using the flashall.bat method. (dipper_global_images_V11.0.3.0.QEAMIXM_20200118.0000.00_10.0_global)
I kept everything stock for a few days even recovery, to ensure once that everything was back to normal.
Next I flashed the latest OrangeFox beta recovery, and I highly recommend the latest beta build over any other version of Recovery, it will decrypt when official Twrp will not. It is now more up to date than the LR Team version, and all of the bugs have been solved by DarthJabba. In fact, he even added a script to work around poorly designed startup scripts, which are suprisening not consistent between the wide range of custom roms for the Mi8.
Today, I am still using Orange Fox, ( OrangeFox-R10.1_002-Beta-dipper) and the latest stable Magisk. I no longer have freezing, unexpected shutdowns, slow starts, or poor battery life. My issue was without a doubt corruption, and bugs with the mid february version of Xiaomi.EU. The last 2 releases have been solid.
Since this weekend I face the same problem. Every action seems to bit slower than before. And I don't know what I did that resulted in this problem. The last thing I remember I installed was the new Miui12 live backgrounds. But I deleted them again.
I'm on stock since some weeks.
But I don't want to install everything from the beginning again.
Do you know how to solve the problem without wiping everything?
Edit: As I think about it, it seems as if the caching of the apps doesn't work as good as before and the killing of apps is too aggressiv.
But what did affect it?
Edit: I found the solution for my problem.
With Android Battery Historian was able to find the process that made the trouble.
It was the Miui wallpaper carousel app. After deleting it the problems were gone.
Erpe7 said:
Hi guys,
I'm a bit concerned about my mi8. Since several weeks now the phone is getting so slow to boot, even into recovery mode !
For exemple, today before starting to see the havoc logo spinning I count more than 20 spins. Months ago it took only 5 or 6, 2 weeks ago : more than 8... Etc.
When phone is started first apps tha usualy open really fast (Viper4fx, gsam battery monitor, magisk notifications) are so slow to open. Some other apps same thing the moment I open them.
Click to expand...
Click to collapse
it's a hardware issue and it's going to keep coming back, i spent the last two months trying to resolve it but i gave up.
it seems that UFS chip malfunctions on a lot of F1 and mi8 phones.
danielnavarrowo said:
Hello!
Did you fix it? Because it's happening to my Mi 8 too. It's exactly the same issue, the phone takes a long time to boot up, to open apps and even to boot into TWRP
Click to expand...
Click to collapse
Sorry for repling only now guys...
Thx to all who proposed to solve my issue, I will tell you what I did to fix my mi 8.
I did a crystal clean flash :
- downloaded & installed last miui image using miflash
- used "clean all" at the bottom right (be careful to not choose something else like "lock boot loader ")
- then you'll need to flash recovery (twrp), then format data by typing yes. Then copy from where you want your custom rom, flash it flash magisk and boot.
I did this several months from now and my phone is like just new!
No issue at all since.
I guess installing lot of different kernels like I did before must have broken something and hopefully this could help if you dont have more serious issues.
Ps: battery is more than ok and there is no hardware problem.
Thx again to Dexer125 for his help!
Sent from my dipper using XDA Labs
Erpe7 said:
Sorry for repling only now guys...
Thx to all who proposed to solve my issue, I will tell you what I did to fix my mi 8.
I did a crystal clean flash :
- downloaded & installed last miui image using miflash
- used "clean all" at the bottom right (be careful to not choose something else like "lock boot loader ")
- then you'll need to flash recovery (twrp), then format data by typing yes. Then copy from where you want your custom rom, flash it flash magisk and boot.
I did this several months from now and my phone is like just new!
No issue at all since.
I guess installing lot of different kernels like I did before must have broken something and hopefully this could help if you dont have more serious issues.
Ps: battery is more than ok and there is no hardware problem.
Thx again to Dexer125 for his help!
Sent from my dipper using XDA Labs
Click to expand...
Click to collapse
I can confirm this.
I have been unrooted on stock for a few months now and have had no problems since then.
Hello, I have the slow issue (Androbench app with poor performances) after several dates when I have rooted my phone: Mi8 Chinese version with stock global ROM.
After unroot the phone, several days after, the phone works fine with Androbench app with good performances.
I need root my phone to use Magisk hide for Google Pay in order to avoid the Google block for contactless payment.
Can anybody help me about the understanding of this behaviour?
I do not know the reason why the phone is slow after root and why the phone works fine after several days after rooting.
Thanks in advance. Regards
roberbas said:
Hello, I have the slow issue (Androbench app with poor performances) after several dates when I have rooted my phone: Mi8 Chinese version with stock global ROM.
After unroot the phone, several days after, the phone works fine with Androbench app with good performances.
I need root my phone to use Magisk hide for Google Pay in order to avoid the Google block for contactless payment.
Can anybody help me about the understanding of this behaviour?
I do not know the reason why the phone is slow after root and why the phone works fine after several days after rooting.
Thanks in advance. Regards
Click to expand...
Click to collapse
Hi,
Mine has hardware issue (rooted).
Didn't try to unroot it if there is a difference like you describe.
Can't help you with magisk hide. I don't use it.
I have this issue with my mi 8 guys, just happened yesterday
So flashing the latest official rom via miflash is the way to fix it?
Irish_Dude said:
I have this issue with my mi 8 guys, just happened yesterday
So flashing the latest official rom via miflash is the way to fix it?
Click to expand...
Click to collapse
Hello, yes in my case. Sometimes, with wipe all, internal storage included, the problem it solved.
Recently I have the issue again without root: only with custom rom flashed. Several times the issue was reproduced out of my habitual site during vacances.
Thanks