Hi
if my Note 5 is turned off or the battery is drained and I plug it in to charge my Note 5 will show the Battery with the bold and that's it! Normally after a while the battery usually shows the percentage und you get a animation at the bottom while charging and from there you can turn on ur Note 5 but mine doesn't do that anymore! I Can't even turn it on because it freezes I have to long press all buttons to get it going. This happend after trying out this Custom bootlogo for Exynos 7420 devices
and failing I had to fix it with the help of @dr.ketan to even get my Note 5 to boot.
Same thread post 80
http://forum.xda-developers.com/showpost.php?p=64030217&postcount=80
I have provided odin flashable rescue pack. Flash it.
dr.ketan said:
Same thread post 80
http://forum.xda-developers.com/showpost.php?p=64030217&postcount=80
I have provided odin flashable rescue pack. Flash it.
Click to expand...
Click to collapse
I know I did flash that to rescue my Note and after that I flashed this to get back the stock bootlogo. My Problem that my Note freezes if it's turned off and plugged in remains. Like I said it only shows the battery logo with the bolt in it nothing more.
@dr.ketan what partition is responsible for that function and can i maybe re-flash it? this really sucks....
Hey, This is first post and my note 3 (SM N900A a&at ) doesnt open properly, stuck on sam logo and only i get screen of stock recovery (odin mode). Got this issue while i get back a restore file which has ended with FAILED.
Is this called the Brick ? i only have a pc, odin and a note 3.
Waiting for your helps
Thanks
ancientmind said:
Hey, This is first post and my note 3 (SM N900A a&at ) doesnt open properly, stuck on sam logo and only i get screen of stock recovery (odin mode). Got this issue while i get back a restore file which has ended with FAILED.
Is this called the Brick ? i only have a pc, odin and a note 3.
Waiting for your helps
Thanks
Click to expand...
Click to collapse
Answer to myself Here solution on video below
https://www.youtube.com/watch?v=CC1lU0jCqmQ
Hello All,
While I was taking pictures with latest patch OTA firmware, the Note 9 just rebooted and was stuck at the boot screen.
Weird, it was kinda a long pause then it was just plain stuck.
After 20 minutes, I tried to reboot it to recovery mode and it would not enter into that mode and would just reboot.
I was able to get to download mode and reflashed the latest firmware and it would reboot and not leave the splash screen.
I took it to t-mobile and they said that since it was under warranty, they would just order me another and it would take 3 days because they did not have any note 9 in stock.
They said because there was no visual damages, they wrote it as a manufacturer's defect.
When I get into the download mode, there was some tiny type that read fuse burnt.
What does that mean? Why did the odin flash mode work after 3 successful attempts I could not get back to working mode?
Stuck and waiting,
Regards.
serendipityguy said:
Hello All,
While I was taking pictures with latest patch dOTA firmware, the Note 9 just rebooted and was stuck at the boot screen.
Weird, it was kinda a long pause then it was just plain stuck.
After 20 minutes, I tried to reboot it to recovery mode and it would not enter into that mode and would just reboot.
I was able to get to download mode and reflashed the latest firmware and it would reboot and not leave the splash screen.
I took it to t-mobile and they said that since it was under warranty, they would just order me another and it would take 3 days because they did not have any note 9 in stock.
They said because there was no visual damages, they wrote it as a manufactures defect.
When I get into the download mode, there was some tiny type that read fuse burnt.
What does that mean? Why did the odin flash mode work after 3 successful attempts I could not get back to working mode?
Stuck and waiting,
Regards.
Click to expand...
Click to collapse
Hi try this option, works for me.
Attached is the link for my last update , I'm using it on AT&T , phone is original from AT&T, and all is Ok for me, I hope can help you.
https://www.google.com/amp/s/forum.x...-t3979303/amp/
Thunderxxx said:
Hi try this option, works for me.
Attached is the link for my last update , I'm using it on AT&T , phone is original from AT&T, and all is Ok for me, I hope can help you.
https://www.google.com/amp/s/forum.x...-t3979303/amp/
Click to expand...
Click to collapse
Your links is dead ;-( , Thanks for posting anyways Thunderxxx
Note 8 port for S7/S7E/NFE (F) Variant
By MKUltraBlack
V1.0
https://www.androidfilehost.com/?fid=8889791610682879859
Needs fixed: Iris
????? Maybe more
Working: Secure folder
Applock
USSD codes
Infinity wallpapers
Edge lighting fixed for NFE screen
Game tools working
Air commands
Long press restart to boot to recovery
Bixby (should be)
This is my first blind port, I only own S7 Edge so I might need some logs from users to fix problems. I found 1 guy to help test so it does boot and work etc
The kernel is just stock NFE kernel with dmverity etc removed
It is just 1 rom zip that flashes, no aroma, and selects the correct files to add for NFE
I will update this thread with more details maybe pics if some people can send them to me as I obviously can't get screenshots from NFE as I don't have 1.
Please feel free to leave any problems you find, not a list of what mods you want added though. There are a lot of threads on xda to add volume mods, etc.
Remember this is only V1.0, I will try fix anything that doesn't work in later versions
Credits:
Special thank you to:
@Kill-Switch
For S7/S7E porting method and lots of other help including fixes
@ananjaser1211
For help with NFE method and updater script mods and NFE twrp for themed twrp
@corsicanu
For long press boot to recovery method and other help including fixes
******************
How to install
custom rom
******************
You will need:
*PC with Odin 3.13.1 or above
(https://samsungodin.com)
*TWRP .tar image for your model
Flat: https://eu.dl.twrp.me/herolte/
Edge: https://eu.dl.twrp.me/hero2lte/
*Rom
(Stored on external memory/sdcard)
*Unlocked OEM
To unlock OEM
********************************************
Go to settings, phone information, and tap build number until it says developer options unlocked, press back twice and go into developer options turn on OEM unlock
********************************************
1. Put your phone into download mode by turning your phone off, now press volume down, power and home key at the same time until the screen turns green, then release the buttons.
2. Open Odin on your PC and plug the USB cable into your phone and press volume up.
You will see it is connected to Odin, (there will be a blue rectangle saying com(number)
3. Select the AP section and load your TWRP .tar image in there.
4. Get ready to press volume up, home and power button at same time on your phone now press start on Odin, it will only take a few seconds, as soon as the box goes green and says pass, press the volume up, home and power button combo until TWRP splash screen shows up on your phone screen. Now release button combo and unplug USB cable from your phone.
5. In twrp press wipe, then format. A keyboard will appear, type yes and press enter. Now press back to go to TWRP main screen and press reboot and select reboot to recovery. It will now reboot back into TWRP.
6. Press wipe again, then format, type yes, press enter. (Do this 3 times)
Press back to go to TWRP main screen and press wipe, select advanced wipe, check all boxes apart from OTG and SDCARD and swipe. (Do this 3 times)
Press back to go to TWRP main screen and press wipe then swipe to factory reset. (Do this 3 times)
********************************************
Your phone is now completely clear with no operating system and ready to flash a custom rom. When you downloaded your rom, you stored it on your sd card or external storage, you need to do this as when you do all the wipes it wipes your internal storage but not your sd card, that's why it says in advanced wipe don't check the sd card or OTG boxes.
********************************************
7. Press back until you go to main screen in TWRP and select install, select storage, external (sd card) and select the rom zip. Now just swipe to flash.
Normally it will go into aroma which contains check boxes of extra items to add into the rom, this rom however is a straight flash, it will automatically detect your phone model and select the correct kernel and battery capacity. It will say Installation finished when done. Now go back to main twrp screen and select reboot and press system. The phone will reboot, leave it 10-15mins to allow it to load the rom, be patient. Then you will be at the set up page just like starting a new phone. Set up from there and enjoy the rom.
Sent from my Note 8 using XDA Labs
Reserved also
Sent from my Note 8 using XDA Labs
I have also done a OneUI night mode themed twrp using @ananjaser1211 new 3.4.0 twrp.
Again if you spot any errors please contact me and I will sort them out.
Just flash the .img in twrp to recovery section and reboot to recovery.
Link:
https://www.androidfilehost.com/?fid=8889791610682879875
Sent from my Note 8 using XDA Labs
Gonna give this a try
Sent from my SM-G965F using Tapatalk
Nice
After flashing says No OS installed
Sent from my SM-N975U using Tapatalk
Nice work bro,keep it up
butchieboy said:
After flashing says No OS installed
Click to expand...
Click to collapse
What order did you do it in? That sounds like you wiped everything after installing the rom.
Follow the instructions in post 2
Sent from my Note 8 using XDA Labs
Lol nope, I know better then that. Flashed it twice back to back same results
Sent from my SM-N975U using Tapatalk
butchieboy said:
Lol nope, I know better then that. Flashed it twice back to back same results
Click to expand...
Click to collapse
Did it give an error when flashing
Also what version of Note Fan Edition do you have, F?
Sent from my Note 8 using XDA Labs
Yeah got bootscript error. I have F version Note FE
Sent from my SM-N960U using Tapatalk
Never mind I think I got it figured out.
butchieboy said:
Yeah got bootscript error. I have F version Note FE
Sent from my SM-N960U using Tapatalk
Never mind I think I got it figured out.
Click to expand...
Click to collapse
What is bootscript error, was there a number of something like script ended with error 7
The rom and Kernel are based on F variant. Did you use the new TWRP as well
Using Anans Twrp..sorry about that he knows about the error. Got it sorted out and flashed, Magisk installed. Navigation buttons have no back light on NoteFe F version. Using in United States on At&t. Text working fine. Testing call quality shortly.View attachment 5049861
Sent from my SM-N950F using Tapatalk
hello bro @MKUltraBlack, how did u make secure folder work in ported rom ?
i ported hades rom v12 from note 8 to note fe but cant make secure folder work,,
i already replace ccm smali from note fe to note 8 services.jar but still cant make it work..
im very need secure folder work again..heehe
jaran kepang said:
hello bro @MKUltraBlack, how did u make secure folder work in ported rom ?
i ported hades rom v12 from note 8 to note fe but cant make secure folder work,,
i already replace ccm smali from note fe to note 8 services.jar but still cant make it work..
im very need secure folder work again..heehe
Click to expand...
Click to collapse
There is a thread for secure folder mod on xda:
https://forum.xda-developers.com/galaxy-note-8/development/secure-folder-patch-custom-rom-t3949878
This thread is for my rom, not general help.
If you need help porting a custom rom to another model first make sure you have the original devs permission, then ask that dev what they have done to modify their files
Sent from my Note 8 using XDA Labs
MKUltraBlack said:
There is a thread for secure folder mod on xda:
https://forum.xda-developers.com/galaxy-note-8/development/secure-folder-patch-custom-rom-t3949878
This thread is for my rom, not general help.
If you need help porting a custom rom to another model first make sure you have the original devs permission, then ask that dev what they have done to modify their files
Sent from my Note 8 using XDA Labs
Click to expand...
Click to collapse
i read all guide there and do it what they write,,but still cant make it work,, i change ccm from stok to port,,i ask the dev but may be he is busy..
i port it and use it for my self..i never share anything without their permission,.
Hello, anyone has tested this rom?
SecureFolder works right???
mclongthanh said:
Hello, anyone has tested this rom?
SecureFolder works right???
Click to expand...
Click to collapse
Yes secure folder works, iris recognition doesn't.
Read first post for details
Sent from my Galaxy S9+ using XDA Labs
Working on my N935S, this is awesome. Thanks OP!
Hi, I'm using Android 11 rooted and have twrp. I also tried Bluetooth Patcher module and still having problem with connection to my watch. It keeps flickering and disconnect and after that it won't connect anymore.
It stucks endlessly on Finishing pairing... . Any have solution to this problem or facing this issue. Need help to connect my watch to my S21 Ultra.
rehannali said:
Hi, I'm using Android 11 rooted and have twrp. I also tried Bluetooth Patcher module and still having problem with connection to my watch. It keeps flickering and disconnect and after that it won't connect anymore.
It stucks endlessly on Finishing pairing... . Any have solution to this problem or facing this issue. Need help to connect my watch to my S21 Ultra.
Click to expand...
Click to collapse
Did u solve the problem? I also can't get my gear s3 and s21u connected, ever.
Only if i flash CHC firmware... which i'm not in China..
rehannali said:
Hi, I'm using Android 11 rooted and have twrp. I also tried Bluetooth Patcher module and still having problem with connection to my watch. It keeps flickering and disconnect and after that it won't connect anymore.
It stucks endlessly on Finishing pairing... . Any have solution to this problem or facing this issue. Need help to connect my watch to my S21 Ultra.
Click to expand...
Click to collapse
sco00262 said:
Did u solve the problem? I also can't get my gear s3 and s21u connected, ever.
Only if i flash CHC firmware... which i'm not in China..
Click to expand...
Click to collapse
I faced the very same issue with my rooted S21 and active watch 2 which I solved this way :
1 BACKUP !!!
2 flash TWRP and run "multidisabler" TWICE in its terminal
3 reboot to TWRP again and FORMAT data (not only wipe) to remove encryption (phone will be completely wiped)
4 flash the latest Bluetooth_Library_Patcher which also includes the wearables fix
5 reboot to system and setup as usual
6 edit build.prop to change tima from 1 to 0 and reboot
7 set up your watch and enjoy
DaReDeViL said:
I faced the very same issue with my rooted S21 and active watch 2 which I solved this way :
1 BACKUP !!!
2 flash TWRP and run "multidisabler" TWICE in its terminal
3 reboot to TWRP again and FORMAT data (not only wipe) to remove encryption (phone will be completely wiped)
4 flash the latest Bluetooth_Library_Patcher which also includes the wearables fix
5 reboot to system and setup as usual
6 edit build.prop to change tima from 1 to 0 and reboot
7 set up your watch and enjoy
Click to expand...
Click to collapse
I'll give it a try,thank u.
DaReDeViL said:
I faced the very same issue with my rooted S21 and active watch 2 which I solved this way :
1 BACKUP !!!
2 flash TWRP and run "multidisabler" TWICE in its terminal
3 reboot to TWRP again and FORMAT data (not only wipe) to remove encryption (phone will be completely wiped)
4 flash the latest Bluetooth_Library_Patcher which also includes the wearables fix
5 reboot to system and setup as usual
6 edit build.prop to change tima from 1 to 0 and reboot
7 set up your watch and enjoy
Click to expand...
Click to collapse
Tried with no luck for me... Thank u still.
sco00262 said:
Did u solve the problem? I also can't get my gear s3 and s21u connected, ever.
Only if i flash CHC firmware... which i'm not in China..
Click to expand...
Click to collapse
Yes, I need to replace modded files with original ones to work bluetooth. But it only works with Snapdragon Model as I have GM-9980 Hong Kong Model.