Hi Guys,
I have a stock XT1052 on 5.1 (Asia Retail)
I want to try CM12. Can someone please help me out with the following?
1) What is the preferred root method for my device?
2) What recovery etc do I need to use?
3) Could you guys recommend a good version of CM12 to use?
4) If I want to, can I go back to stock (for features like shake to launch camera, active display etc?) How is that done?
Thanks,
Soumen
Only nIghtlies!
soumen08 said:
Hi Guys,
I have a stock XT1052 on 5.1 (Asia Retail)
I want to try CM12. Can someone please help me out with the following?
1) What is the preferred root method for my device?
2) What recovery etc do I need to use?
3) Could you guys recommend a good version of CM12 to use?
4) If I want to, can I go back to stock (for features like shake to launch camera, active display etc?) How is that done?
Thanks,
Soumen
Click to expand...
Click to collapse
We dont have a Stable version in CM12. Only Nightlies are available.
You can use apps to launch camera on Shake, AcDisplay app could replace Active Display.
But Touchless Controls? There's nothing as perfect as the stock one.
I havent rooted yet, But I know, after rooting TWRP Manager app can be used to flash recovery.
soumen08 said:
Hi Guys,
I have a stock XT1052 on 5.1 (Asia Retail)
I want to try CM12. Can someone please help me out with the following?
1) What is the preferred root method for my device?
2) What recovery etc do I need to use?
3) Could you guys recommend a good version of CM12 to use?
4) If I want to, can I go back to stock (for features like shake to launch camera, active display etc?) How is that done?
Thanks,
Soumen
Click to expand...
Click to collapse
1) Unlock bootloader, install TWRP and flash SuperSU.
2) TWRP
3) Always use the last version of CM12.1, if you really want CM
4) Yes, searching for the firmware and flashing it, via recovery or RSD lite. CM12 has shake to launch camera and active display anyway.
Hi there,
I have a Archos Diamond Plus (Android 5.1, MT6753), which I is rooted. Now I want to install the Xposed Framework. Unfortunately is there since Android 5.X no more Installer, only a zip to flash in CWM.
Is there is any recovery which allows flashing and is compatible to MT6753?
I have searched a lot – but I'm not sure, if there is one or if it will breaks the phone.
Can anyone help me?
Thanks a lot in advance!
Well, for the recovery part, I'm trying to port CWM or TWRP to Archos Diamond Plus. Only problem is that I can't seem to unlock my bootloader -_-
So if anyone knows something usefull, please share it with me
Hi,
I got MTCC-KLD6-V2.97 auto unit and most things work fine but I have some issues and need some answers:
1. Google play services keep crashing. Tried to clean cache/data but it still crashing, usually at starting the car (booting device). Any suggestion to fix this issue.
2. Music app crashes 1-2 times when device boots up. After that it works ok. App has poor interface, no search, lists all folders on the right so navigation is slow. Any replacement app with more features?
I mostly use Rocket player instead of default Music app but only drawback is that steering wheel next/prev buttons do not work with rocket player but triggers default Music app to start.
Any way to replace default Music app with Rocket player app and make those buttons work?
3. Radio app looses stations memory from time to time, and it has that search button at the middle that is easily pressed and easily looses memorized stations. Any alternative/modified Radio app for MTCC-KLD6?
4. If there are alternative Music/radio apps for MTCC-KLD6, how to replace them since my ROM is not rooted?
5. How to root my device?
6. I found newer MTCC KLD9 v2.98 mcu.img and xupdateKLD1024x600LP5.1.1.rk3188.MTCC.October ROM for my radio. Is it worth to make upgrade to those? What are the changes? What would be exact procedure to make upgrade.
Sorry for so many noob questions, hope you can help
Thank you.
Best regards,
Z
grgart said:
Hi,
6. I found newer MTCC KLD9 v2.98 mcu.img and xupdateKLD1024x600LP5.1.1.rk3188.MTCC.October ROM for my radio. Is it worth to make upgrade to those? What are the changes? What would be exact procedure to make upgrade.
Click to expand...
Click to collapse
This would fix 1-5. MCU update probably wouldnt do a whole lot. Just update rom first.
Procedure is easy, put update.img onto microsd, put it in your gps slot, boot into recovery, wipe all and update.
Actually come to think of it, I think MCU 2.98 has a radio station fix in it. Does it @typos1
miffymiffy said:
This would fix 1-5. MCU update probably wouldnt do a whole lot. Just update rom first.
Procedure is easy, put update.img onto microsd, put it in your gps slot, boot into recovery, wipe all and update.
Actually come to think of it, I think MCU 2.98 has a radio station fix in it. Does it @typos1
Click to expand...
Click to collapse
Sure does, well at least on KLD3-9, not sure about non numbred KLDs and KLD2s.
miffymiffy said:
This would fix 1-5. MCU update probably wouldnt do a whole lot. Just update rom first.
Procedure is easy, put update.img onto microsd, put it in your gps slot, boot into recovery, wipe all and update.
Click to expand...
Click to collapse
Thank you, will try.:good:
Same preocedure for mcu.img ?
I would like to backup some apps with data before update, but for that I probably need root to use titanium backup.
how to root this one or is there other way to backup some apps and data?
Also is there TWRP for this one to make full backup if something goes wrong??
Thanx again.
grgart said:
Thank you, will try.:good:
Same preocedure for mcu.img ?
I would like to backup some apps with data before update, but for that I probably need root to use titanium backup.
how to root this one or is there other way to backup some apps and data?
Also is there TWRP for this one to make full backup if something goes wrong??
Thanx again.
Click to expand...
Click to collapse
Yes same procedure as MCU, there is no need to back anything up if you are flashing the MCU. TWRP is not recommended for these units either, but even if it was you cannot flash or backup the MCU with it.
typos1 said:
Yes same procedure as MCU, there is no need to back anything up if you are flashing the MCU. TWRP is not recommended for these units either, but even if it was you cannot flash or backup the MCU with it.
Click to expand...
Click to collapse
I ment apps backup. I installed and setup some apps (torque, rocket player, igo...) and after I flashing ROM I need to install and setup those apps all over again, don't I?
Also do I need to flash mcu and then ROM or it does not matter which is flashed first?
Thank you.
typos1 said:
Sure does, well at least on KLD3-9, not sure about non numbred KLDs and KLD2s.
Click to expand...
Click to collapse
I did it on my kld2 so should be good.
grgart said:
I ment apps backup. I installed and setup some apps (torque, rocket player, igo...) and after I flashing ROM I need to install and setup those apps all over again, don't I?
Also do I need to flash mcu and then ROM or it does not matter which is flashed first?
Thank you.
Click to expand...
Click to collapse
Separately or together, either way is fine, its good practise to update the MCU as well.
miffymiffy said:
I did it on my kld2 so should be good.
Click to expand...
Click to collapse
Cool, just non numbered KLDs it doesnt work on then.
So there is no way to keep/backup installed apps and data?
Flash procedure should be like this?
1 boot to recovery
2 select option "update system/mcu image from sdcard"
3 select mcu.img from sdcard and flash
4 reboot to recovery
5 select option "update system/mcu from sdcard and clear all"
6 select rom.img from sdcard and flash
7 reboot to system
8 install apps again
grgart said:
So there is no way to keep/backup installed apps and data?
Flash procedure should be like this?
1 boot to recovery
2 select option "update system/mcu image from sdcard"
3 select mcu.img from sdcard and flash
4 reboot to recovery
5 select option "update system/mcu from sdcard and clear all"
6 select rom.img from sdcard and flash
7 reboot to system
8 install apps again
Click to expand...
Click to collapse
If youre using the standard ROM, other than Titanium or similar no.
I had the same problems with the same product.. and more.. i don't get to install the android auto app... could you help me? Did you have to root your device? Thanks Gustavo
Question regarding KLD, I'm confused about numbers.
What that number after KLD represents?
My device is KLD6-V2.97 and on repository there is KLD9-V2.98 mcu.img
Is that KLD9 img compatible with my KLD6 or do i flash only KLD6 imgs?
Thanx.
lgclopes said:
i don't get to install the android auto app... could you help me?
Click to expand...
Click to collapse
Not sure I understand what do you mean by this "android auto app". Can you clarify the question?
grgart said:
Question regarding KLD, I'm confused about numbers.
What that number after KLD represents?
My device is KLD6-V2.97 and on repository there is KLD9-V2.98 mcu.img
Is that KLD9 img compatible with my KLD6 or do i flash only KLD6 imgs?
Thanx.
Click to expand...
Click to collapse
Maybe. It appears that numbered kld mcus are interchangeable. It is the non numbered that seem not to be. I have a kld2 that I have flashed both on and it works. Just need to change key options in factory settings(MCU)
lgclopes said:
I had the same problems with the same product.. and more.. i don't get to install the android auto app... could you help me? Did you have to root your device? Thanks Gustavo
Click to expand...
Click to collapse
Android Auto will not work installed on these units. It is intended to be installed on the phone.
Installed KLD9 2.98 mcu and malaysk rom, and all works fine.
If you flash mcu, take screengrab of all factory settings (pass 126), you'll need to setup it again.
Only thing I noticed is about Igo Nextstep, everithing is smaller on malaysk rom, like DPI is different. Will fix DPI at sys.txt
Also, seams that GPS audio mixing is not exactly as set, even level is 0 music level gets lower when voice is activated.
grgart said:
Installed KLD9 2.98 mcu and malaysk rom, and all works fine.
If you flash mcu, take screengrab of all factory settings (pass 126), you'll need to setup it again.
Click to expand...
Click to collapse
You can also backup your MCU config and restore it as you would flash an MCU or ROM.
grgart said:
Hi,
I got MTCC-KLD6-V2.97 auto unit and most things work fine but I have some issues and need some answers:
1. Google play services keep crashing. Tried to clean cache/data but it still crashing, usually at starting the car (booting device). Any suggestion to fix this issue.
2. Music app crashes 1-2 times when device boots up. After that it works ok. App has poor interface, no search, lists all folders on the right so navigation is slow. Any replacement app with more features?
I mostly use Rocket player instead of default Music app but only drawback is that steering wheel next/prev buttons do not work with rocket player but triggers default Music app to start.
Any way to replace default Music app with Rocket player app and make those buttons work?
3. Radio app looses stations memory from time to time, and it has that search button at the middle that is easily pressed and easily looses memorized stations. Any alternative/modified Radio app for MTCC-KLD6?
4. If there are alternative Music/radio apps for MTCC-KLD6, how to replace them since my ROM is not rooted?
5. How to root my device?
6. I found newer MTCC KLD9 v2.98 mcu.img and xupdateKLD1024x600LP5.1.1.rk3188.MTCC.October ROM for my radio. Is it worth to make upgrade to those? What are the changes? What would be exact procedure to make upgrade.
Sorry for so many noob questions, hope you can help
Thank you.
Best regards,
Z
Click to expand...
Click to collapse
I found the MTCC KLD9 v2.98, but can't seem to find the correct ROM... Here is my MCU Version:
MTCC-KLD6-V2.97
Aug 02 2016 10:35:08
Android version：
5.1.1
1024*600
Kernel version：
3.0.101+
[email protected] #110
Mon Aug 22 17:20:57 CST 2016
Build number：
rk3188-userdebug 22082016.17:29:44
It's an Eonon and would like to put another ROM on it, Malaysk or maybe something else
dlsc2111 said:
I found the MTCC KLD9 v2.98, but can't seem to find the correct ROM... Here is my MCU Version:
MTCC-KLD6-V2.97
Aug 02 2016 10:35:08
Android version：
5.1.1
1024*600
Kernel version：
3.0.101+
[email protected] #110
Mon Aug 22 17:20:57 CST 2016
Build number：
rk3188-userdebug 22082016.17:29:44
It's an Eonon and would like to put another ROM on it, Malaysk or maybe something else
Click to expand...
Click to collapse
Its not an Eonon, theres no such thing as an Eonon, Eonon sell Klyde units - your is a Klyde, you can tell from the "KLD" bit in the MCU identifier.
Your MCU version is not important when it comes to the ROM.
What do you mean that you cant find the correct ROM ? - you can use ANY 1024x600 RK3188 ROM that you want.
Google play services keep crashing with Malaysk ROM also.
Tried to clean cache/data but it still crashing, usually after car turon and starting it after short time.
There is some "Play Store Fix/" folded at huifei.fs-fileserver.de/content/, does those apps fix that problem?
Any suggestion to fix this issue?
Thank you.