Help Me On MY Phone (BluR1HD) Accidentally Format - BLU R1 HD Questions & Answers

Accidentally I format My Phone Using SP FlashTool Cannot Start Pressing Power Button. and Cannot Go To BootLoader Anyone Can Help Me ? #DeadPhone

BLUR1HD said:
Accidentally I format My Phone Using SP FlashTool Cannot Start Pressing Power Button. and Cannot Go To BootLoader Anyone Can Help Me ? #DeadPhone
Click to expand...
Click to collapse
The firmware attached to the following post should help.
https://forum.xda-developers.com/showpost.php?p=71497570&postcount=6
Unzip the download then open to the scatter file from so flash tool
Once you get this flashed, you will have problems with wifi, and sim cards because of the format you lost them. Bug it can be dealt with, first need to get phone running Android .

Related

[Q] How to boot to Android Recovery Mode in Xperia SP?

Had one question in mind..
how to boot to stock android recovery mode for Sony Xperia SP??
Edit: Searched..guess there's no recovery mode for SP
Not in Stock ROM atleast... sorry about new thread O.O"
PS: asked Customer Care at flipkart.com asked me do so to resolve battery drain]
satishynd said:
Had one question in mind..
how to boot to stock android recovery mode for Sony Xperia SP??
Edit: Searched..guess there's no recovery mode for SP
Not in Stock ROM atleast... sorry about new thread O.O"
PS: asked Customer Care at flipkart.com asked me do so to resolve battery drain]
Click to expand...
Click to collapse
No recovery mode but there is a safe mode which supposedly disables 3rd party apps on boot.
Press power button and you get the power off/airplane mode/take screenshot screen - long press power off and you get the option to reboot into safe mode.
Repair the phone with Update Service or Flashtool, delete al content from external SD and internal too...do a clean,fresh install.
cachanilla86 said:
Repair the phone with Update Service or Flashtool, delete al content from external SD and internal too...do a clean,fresh install.
Click to expand...
Click to collapse
Is there a way to save my current firmware? I'm asking this because the update firmware seems have some problems, so is there any way to save my current firmware before going to repair phone with Update service?
satishynd said:
Is there a way to save my current firmware? I'm asking this because the update firmware seems have some problems, so is there any way to save my current firmware before going to repair phone with Update service?
Click to expand...
Click to collapse
It involves Flashtool and Update Service
After i install this rom.
How do i boot into recovery. I have tried the volume down and power but does not work.
Thanks
oXperiax said:
After i install this rom.
How do i boot into recovery. I have tried the volume down and power but does not work.
Thanks
Click to expand...
Click to collapse
Stock Sony firmware doesn't have a recovery like HTC or Samsung. You need to root and install a recovery.
We cannot get into the android recovery mode because its not in the factoy version of the phone as the bootloader is locked in the factory version so try installing cwm custom recovery
[email protected][email protected] said:
We cannot get into the android recovery mode because its not in the factoy version of the phone as the bootloader is locked in the factory version so try installing cwm custom recovery
Click to expand...
Click to collapse
Hi, so you are saying there not anyway to reintall room stock without entre the setting when the phone is turn con?
every version of android have diferent way how to enter into recovery ... mostly its presing some buttons serveral time wheh you power you device...
try vol up , down , camera or some combination .... if you have recovery you will find a way to start it
zaxxpp said:
every version of android have diferent way how to enter into recovery ... mostly its presing some buttons serveral time wheh you power you device...
try vol up , down , camera or some combination .... if you have recovery you will find a way to start it
Click to expand...
Click to collapse
I did many way and nothing. Now I am downloading with sony software update tool
Enviado desde mi SM-T530 mediante Tapatalk

[Help] Unlocking bootloader D-405N

I use this guide: http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
But I cant find recovery.img on my phone and I use another recovery. Now I want to go in Recovery Mode but I have only LG logo and in left up corner is:
[490] fastboot_int()
[590] USB init ept @ 0xffdc000
[610] udc_start()
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
damianww said:
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
Click to expand...
Click to collapse
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
olinojephanko said:
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
Click to expand...
Click to collapse
But which is on my D-405N?
damianww said:
But which is on my D-405N?
Click to expand...
Click to collapse
all of them, its for all lg l90 D4xx devices.
I recommend using this one TWRP_2.8.4.0_160115_L90.img
Ok It's done, thank you. But i have another problem... I put on my SD card ROM but Team Win Recovery Procjet doesn't see zip file. Why? SD card must be in Ext2?
sd card should be in fat32
make sure you are looking into right directory, in twrp you can choose between internal and external sdcard. if you cant see it on external memory try putting it into internal.
I have another problem... -.- I install ROM but when i turn on phone is LG logo, T-mobile logo and I wait and nothing. Someone can help me?!
which rom did you install?
maybe try to do full wipe and reinstall it
olinojephanko said:
which rom did you install?
maybe try to do full wipe and reinstall it
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/development/rom-crystal-pa-8-0-crx-team-t2928842
But how can I go into Recovery Mode? System stopped on T-mobile logo..
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
HOW TO BOOT INTO RECOVERY PRESSING VOLUME AND POWER KEY
You can reboot to recovery via flashify app or following key combination: -
Power of your phone press both Volume Down + Power Button same time, As soon as the LG logo appears release both buttons and immediately press and hold same buttons (Volume Down+Power) again. Now Factory data reset screen will appear saying "Erase all user data & restore default settings?". Use volume down key to select "Yes" and press power button to confirm and now you should be in recovery.
Click to expand...
Click to collapse
olinojephanko said:
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
Click to expand...
Click to collapse
I make factory reset and i have Crystal PA (I don't install that after factory reset O.O) Thanks a lot!!

Please help me

Hay
My device che2_l11
I wanted flash by fastboot i Extracted system. Img and more and flash by cmd and fastboot mod.
Now my problem
My problem is that the cell phone will restart in 20 seconds.
You're now using the buttons on the top and bottom.
Flash through File update. App
I do think, however, continues to update up to 20% off the device again
Please help me
Forgive for my bad English
please help me my device deded
:crying::crying::crying::crying:
davod84 said:
:crying::crying::crying::crying:
Click to expand...
Click to collapse
I think ur mobile got bootloop.. download firmware from honor site, extract it(dload/upload.app) and keep that folder in root of ur SD Card.
Swtich off ur Phone and do long press of Power button+vol up+vol down.. it'll hard reset ur mobile..
PS: please download proper firmware which suites ur model no.
vinothkumarv said:
I think ur mobile got bootloop.. download firmware from honor site, extract it(dload/upload.app) and keep that folder in root of ur SD Card.
Swtich off ur Phone and do long press of Power button+vol up+vol down.. it'll hard reset ur mobile..
PS: please download proper firmware which suites ur model no.
Click to expand...
Click to collapse
thanks my friends for ansver
my problem
i downloads all frimwers
an copy to sd card
i flash an restart by 20/
device and not complet flash
my device is full sharged
:crying::crying::crying::crying::crying::crying:
why to help me?
Fixed your device?

Debrand Huawei p9

Hello everybody, I am trying to debrand my new Huawei p9. I have tried the dload method explained in the development section but I can't manage to make the upgrading start: when I press both volume buttons and turn on (with the downloaded dload folder inside the micro SD) the device simply vibrates two times and then reboot. Do you know if I am doing anything wrong or if there are other methods? Any help would be appreciated. Thanks a lot
PS: I'm sorry if I am opening a new thread but xda doesn't let me reply to the original thread because I don't have the right to post in the development section of the forum.
You must press them at the same time, turn off the device and press the vols buttons first and them the power button. The .rar/.zip must be uncompressed on the SD.
HI thank you for your help, but that is exactly what I did: unzipped the file (which contained only the dload folder) and put it in the root of the micro sd. I turned off the phone and pressed the volume buttons (up and down) together and then pressed the power button. The phone vibrated twice then the logo appeared then the screen became back and then again the logo and this loop continued until I stopped pressing the volume buttons. Anyway I don't have the phone with me now so I'll try again tomorrow. Will it work also if I put the dload folder inside the internal memory?
put file, sd card dload folder work. I dont try in internal memory.
general91 said:
HI thank you for your help, but that is exactly what I did: unzipped the file (which contained only the dload folder) and put it in the root of the micro sd. I turned off the phone and pressed the volume buttons (up and down) together and then pressed the power button. The phone vibrated twice then the logo appeared then the screen became back and then again the logo and this loop continued until I stopped pressing the volume buttons. Anyway I don't have the phone with me now so I'll try again tomorrow. Will it work also if I put the dload folder inside the internal memory?
Click to expand...
Click to collapse
only hold down the volume up and down keys with power at same time until you see the Huawei logo then let go. do not carry on holding them down - this is what was causing your phone to loop
Thanks for the help it worked! I spent so much time trying to understand what I was doing wrong while it was so simple.
general91 said:
Thanks for the help it worked! I spent so much time trying to understand what I was doing wrong while it was so simple.
Click to expand...
Click to collapse
you're welcome - often can be simple with phones, other times not so
Debrand p9 vodafone IT
Hello,
I would like to debrand my phone. I read some guide here and I will use srk tool.
Now I'm on c02b133.
Which is the correct procedure?
have I to install via dload c432b136, go to c900 and then unlock bootloader, root e oem info file?
Or have I to unlock bootloader, root, oem info file and then flash the rom c432?.
I have this doubt because in some post, someone told to reinstall stock recovery after root, and forced the installation of the stock rom..so I'm not sure about correct way.
Thank to everyone
Massimiliano
maxmax91 said:
Hello,
I would like to debrand my phone. I read some guide here and I will use srk tool.
Now I'm on c02b133.
Which is the correct procedure?
have I to install via dload c432b136, go to c900 and then unlock bootloader, root e oem info file?
Or have I to unlock bootloader, root, oem info file and then flash the rom c432?.
I have this doubt because in some post, someone told to reinstall stock recovery after root, and forced the installation of the stock rom..so I'm not sure about correct way.
Thank to everyone
Massimiliano
Click to expand...
Click to collapse
Can you share thread which you got c432? I have L09C440B138 and want to L09B432 open market nougat

huawei p9 plus blocked on logo

sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Foul restart by holding down the volume button in the upper part (+). In recovery you do comes out of the 2 formats that are indicated and so you starts with the configuration of fabrica.
Grlschia said:
Foul restart by holding down the volume button in the upper part (+). In recovery you do comes out of the 2 formats that are indicated and so you starts with the configuration of fabrica.
Click to expand...
Click to collapse
sorry but the phone dont start to recovery mode it still blocked on logo and whene I press volume down boutton and plug the usb cable it enter to the fastboot & rescue mode only
laro2202 said:
sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Click to expand...
Click to collapse
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
jeinnerabdel said:
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
Click to expand...
Click to collapse
thank for the message
the phone is huawei P9 Plus VIE-L29 the wrong thing that I did that I flash a data file before flashing rom and the big problem that the phone enter only to the fastboot and rescue mode like the attached picture and I thing that my phone is dead now and no way to resolve this problem
Don't worry FIND THIS VIDEO in youtube Huawei Honor 7 flashing in fastboot - DC Phoenix... BUT u should payed 15 euro for using this program but it works 100 % i used it for my VIE-L29C10 this programm flashed you phone from fastboot! GOOD luck MATE
Ok, first, don't worry, this is soft brick, which means the phone will recover, it's just a matter of flashing the right rom. Follow my steps above and make sure you turn on the phone holding the 3 buttons at the same time, once the logo appears release the power button and keep both volume keys for a few seconds and release them. That's forced update mode.
The rom is about 2.8 gigabytes and must be in dload folder on the root of your external SD.
---------- Post added at 01:40 AM ---------- Previous post was at 01:38 AM ----------
PD: Don't pay for software to get the phone back! You can do it yourself!
jeinnerabdel said:
Ok, first, don't worry, this is soft brick, which means the phone will recover, it's just a matter of flashing the right rom. Follow my steps above and make sure you turn on the phone holding the 3 buttons at the same time, once the logo appears release the power button and keep both volume keys for a few seconds and release them. That's forced update mode.
The rom is about 2.8 gigabytes and must be in dload folder on the root of your external SD.
---------- Post added at 01:40 AM ---------- Previous post was at 01:38 AM ----------
PD: Don't pay for software to get the phone back! You can do it yourself!
Click to expand...
Click to collapse
yes mate u're right first of all he should try flash his cellphone 3 button method but if it's not work he should pay for this porgamm and 100 % that programm flash his phone from rescue mode
laro2202 said:
thank for the message
the phone is huawei P9 Plus VIE-L29 the wrong thing that I did that I flash a data file before flashing rom and the big problem that the phone enter only to the fastboot and rescue mode like the attached picture and I thing that my phone is dead now and no way to resolve this problem
Click to expand...
Click to collapse
mine is the same except that the FRP is Unlock
have you found a fix yet
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
jeinnerabdel said:
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
Click to expand...
Click to collapse
Where did you find the rom to download ?
DenPim said:
yes mate u're right first of all he should try flash his cellphone 3 button method but if it's not work he should pay for this porgamm and 100 % that programm flash his phone from rescue mode
Click to expand...
Click to collapse
Just rescued my phone by using the DC Unlocker tool.....Best 15 euros I've spent
what exactly you purchased in dc unlocker? I have the same problem as you pls help..
Jpacs said:
what exactly you purchased in dc unlocker? I have the same problem as you pls help..
Click to expand...
Click to collapse
I purchased 15 credits in DC phoenix....Read the Q&A and it will help......The program let me install a firmware using fastboot
cuzovillafan said:
I purchased 15 credits in DC phoenix....Read the Q&A and it will help......The program let me install a firmware using fastboot
Click to expand...
Click to collapse
I just restored my phone but spent 30, so annoying thnx
Sent from my VIE-L29 using XDA-Developers Legacy app
Jpacs said:
I just restored my phone but spent 30, so annoying thnx
Click to expand...
Click to collapse
Have you managed to update it
laro2202 said:
sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Click to expand...
Click to collapse
The device loses a Recovery Stock file that must be installed
1. Download the file Recovery Open the zip file and place the file in the Minimal ADB and Fastboot program
2. Open Minimal ADB and Fastboot
3. Connect your phone to the computer
4. Type this command (fastboot flash recovery recovery.img)
5. After installing the Recovery Stock file in your mobile phone, disconnect the cable and continue pressing the stop button until it restarts and press the stop button with the volume up button until you see Recovery and load the original ROM in the SD card
I'm sorry I can not add links to my posts a few
samy5689 said:
The device loses a Recovery Stock file that must be installed
1. Download the file Recovery Open the zip file and place the file in the Minimal ADB and Fastboot program
2. Open Minimal ADB and Fastboot
3. Connect your phone to the computer
4. Type this command (fastboot flash recovery recovery.img)
5. After installing the Recovery Stock file in your mobile phone, disconnect the cable and continue pressing the stop button until it restarts and press the stop button with the volume up button until you see Recovery and load the original ROM in the SD card
I'm sorry I can not add links to my posts a few
Click to expand...
Click to collapse
No chance to work,FRP and Bootloader is locked.This only working with unlocked Bootloader to flash img Files via Fastboot
Only DC Phoenix helps
---------- Post added at 08:34 AM ---------- Previous post was at 08:29 AM ----------
Instruction here
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
This works with locked FRP and locked Bootloader.
You have 72 Hours for 15€.
Only what you need is the right Firmware(UPDATE.APP) from your Device

Categories

Resources