PROBLEM: touchscreen is not responding and after a hard reset (recommended by T-Mobile not so saavy techs) I got stucked in the "TAP THE SCREEN TO SETUP YOUR WINDOWS MOBILE DEVICE" and since there is no "ESCAPE" button to skip this screen, I had a pretty much useless phone, I could only receive calls but not able to place any calls or have access to the start menu or any other function pretty much.
SOLUTION: after hours searching all over the internet, I found a very nice - FREE! - application designed for blind people to "SKIP" the align process, http://www.codefactory.es/en/ by CodeFactory. The application is called "REMOTE SCREEN ALIGNMENT" it is very easy and a quick way to skip the screen alignment process.
CONCLUSION: although it will not fix the unresponsive touch screen, it will at least let you access your phone through the buttons and slide out keyboard.
P.S.: there are many other tools and free apps there for a lot other phones.
ENJOY!
~~~~ FREEDOM OF INFORMATION IS THE BASIS OF LIBERTY ~~~~
JR
HTC Wings does not have touchscreen
maybe you are in the wrong section
Hello guys, First of all I'd like to thank this amazing comunity, I had a lot of help here when I had my Xperia Play, I squeezed tons of potential out of that phone thanks to this website.
I'm just joining now, since for the first time I can't really find an answer to my problem by just searching; A friend just got a Samsung Galaxy S3 Mini, Telcel carrier from Mexico, the problem is, we've noticed the screen sensitivity on the lower part of the screen seems off, it sort of takes a second tap to actually activate at all, I.E. When pressing the App Drawer icon, if the screen was off, we would have to press it twice for it to actually press, same goes with anything on that lower area of the screen after a little period of inactivity, like opening the keyboard, etc. Once the screen receives this 2nd "tap" so to speak, it acts "normal" as in it will react to a single tap in any area.
Is this normal on this phone? Or is it a cause for concern? There has been no modifications done, no rooting, no custom ROM.
I hope I'm explaining myself correctly, since english is not my native language. I apologize in advance if I'm not being clear enough, looking forward for any advice from you all.
Thanks.
Try reflash ROM
Sent from my GT-I8190 using Tapatalk 2
I'm not sure if it's just me... but I noticed the active display on my moto x (t-mo) is not active all the time. The good example is.. when the phone display is off (asleep) and you pick up the phone or move the phone, it is supposed to display the time and that pad lock - so you don't have press the lock key to get the time.
On my phone, that works for the most part... but after a while (and I can't figure out what is the trigger/cause), the active display would stop working. When that happens and phone display is off... i pick up/move the phone... screen is still blank. I now need to press the lock button on the side to bring up the unlock screen.
I did find that rebooting the phone will fix this. So, i want to see if anyone else is seeing this behavior, or if I should see about getting moto to fix/replace it - since I just received the phone yesterday.
lithium133 said:
I'm not sure if it's just me... but I noticed the active display on my moto x (t-mo) is not active all the time. The good example is.. when the phone display is off (asleep) and you pick up the phone or move the phone, it is supposed to display the time and that pad lock - so you don't have press the lock key to get the time.
On my phone, that works for the most part... but after a while (and I can't figure out what is the trigger/cause), the active display would stop working. When that happens and phone display is off... i pick up/move the phone... screen is still blank. I now need to press the lock button on the side to bring up the unlock screen.
I did find that rebooting the phone will fix this. So, i want to see if anyone else is seeing this behavior, or if I should see about getting moto to fix/replace it - since I just received the phone yesterday.
Click to expand...
Click to collapse
Do you have a screen protector?
after asking on the moto support site.. the issue may be related to one of the apps. So, I unselected all but the messaging/mail apps, rebooted and things seem to be back to normal now. Make sure you uncheck the box that automatically adds the app to active display and pare it down to the essential apps that really need/use active display.
This may have been answered elsewhere , but I am coming from an S4 and I was wondering why my Droid Turbo when I pick it flashes the lock screen.
I have moto display turned on for notifications and I like that, I do not have the the wave/hand proximity turned on.
The phone will slide in the car seat and the lock screen will come on I pick it up and it flashes on. Then it goes on and I keep moving it around it will then flash back on again. Or every time I take it out of my pocket it comes on.
I heard something about Moto screens breathing or something.
thanks!
joeunc said:
This may have been answered elsewhere , but I am coming from an S4 and I was wondering why my Droid Turbo when I pick it flashes the lock screen.
I have moto display turned on for notifications and I like that, I do not have the the wave/hand proximity turned on.
The phone will slide in the car seat and the lock screen will come on I pick it up and it flashes on. Then it goes on and I keep moving it around it will then flash back on again. Or every time I take it out of my pocket it comes on.
I heard something about Moto screens breathing or something.
thanks!
Click to expand...
Click to collapse
Moto Actions controls that. I actually like it because I can check the time just by waving my hand over the phone without having to hit a button. You could try disabling Moto Actions to see if that helps.
Ally Android said:
Moto Actions controls that. I actually like it because I can check the time just by waving my hand over the phone without having to hit a button. You could try disabling Moto Actions to see if that helps.
Click to expand...
Click to collapse
All the moto actions are disabled, I only have active display on to show notifications. The one where you wave to turn the screen on is not enabled
thx
joeunc said:
All the moto actions are disabled, I only have active display on to show notifications. The one where you wave to turn the screen on is not enabled
thx
Click to expand...
Click to collapse
Did you just turn off the settings or disable the app?
Ally Android said:
Did you just turn off the settings or disable the app?
Click to expand...
Click to collapse
Here is what I see happening, if you turn on Moto Display to flash notifications, each time I just pick the phone or move it the lock screen and time flahes.
If I turn off Moto Display, no notifications flash and when I move the phone no lockscreen, no nothing.
Should be a way to see the notifications flash in and out, but not react to just moving the phone by flashing lock screen
thx
There are two separate apps in play here. Moto Display and Moto Actions.
Moto Display is what you want to keep active so that it will show you on the lock screen when you get a message, etc.
Moto Actions is what happens when you move your hand towards the phone.
If you go into your apps settings and manually disable the Moto Actions app. It will prevent the phone from flashing the lock screen when it detects movement.
Ally Android said:
There are two separate apps in play here. Moto Display and Moto Actions.
Moto Display is what you want to keep active so that it will show you on the lock screen when you get a message, etc.
Moto Actions is what happens when you move your hand towards the phone.
If you go into your apps settings and manually disable the Moto Actions app. It will prevent the phone from flashing the lock screen when it detects movement.
Click to expand...
Click to collapse
I know,. all the Moto Actions are turned off, I only have Moto Display on and have chosen the apps I want to show.
Phone sits on the desk, for a few minutes screen black I reach over and pick it up lock screen comes on
I just restarted and no change
thanks
Do you have "Approach" turned off under moto actions? Cuz that's exactly what it sounds like you have turned on.
Sent from my XT1254 using XDA Free mobile app
Mine does the same thing it may be because the twist for camera is on? all other options are turned off (battery Saving)
Every time I move the phone the notification screen lights up but I noticed if you cover the proximity sensor on the top of phone it doesnt light up at all
Its part of the active display. It comes on when the phone is moved. I do wish there was a setting for it to only come on when you have a notification, but there isn't a setting for that that I know of. I know a lot of ppl like this "feature," but I do miss just the simple notification led.
i do not have approach or twist for camera on at all. I only have the notify on notifications.
phone sitting there , black screen just lift one side up and the screen comes on
Moto Actions/Moto Dispaly
Interesting thread because it illustrates the various preferences we all have in interacting with our phones. I think it's pretty neat that Moto developed these options despite the fact that I've turned off some of the features.
For example, I don't need it to sense my eyes, so I turned off that. I don't need it to turn on each time I wave my hand. It was turning on with shadows/sun/clouds while driving and anytime I'd move my arm. Don't like that.
What I do like is the intermittent notifications as well as the screen turning on if I move the phone. What we do with the notifications is pretty cool too. I like my Turbo Droid.
Cheers!
joeunc said:
i do not have approach or twist for camera on at all. I only have the notify on notifications.
phone sitting there , black screen just lift one side up and the screen comes on
Click to expand...
Click to collapse
Seems to be some confusion in here.
Moto Display uses two methods to turn on the screen. It uses the phone's accelerometer to tell if you move the device. If you move the device at all, Moto Display will turn on. Only way to stop this is to turn off Moto Display.
The other method uses the front IR sensors to detect if you wave your hand in front of the screen. This method can be turned off within Moto Actions.
The screen constantly flashing (especially in the car) is annoying, but it has almost no battery impact.
That's what I was looking for, so it's the accelerometer making it come on as I don't have the hand activation turned on, I just have the moto notifications in Moto display turned on
joshm.1219 said:
Seems to be some confusion in here.
Moto Display uses two methods to turn on the screen. It uses the phone's accelerometer to tell if you move the device. If you move the device at all, Moto Display will turn on. Only way to stop this is to turn off Moto Display.
The other method uses the front IR sensors to detect if you wave your hand in front of the screen. This method can be turned off within Moto Actions.
The screen constantly flashing (especially in the car) is annoying, but it has almost no battery impact.
Click to expand...
Click to collapse
Here is the right solution
Go to settings > App > In all app tab select these two app 1) Moto Display 2) Moto Action, now disable these both app and now the phone wont flash clock..
If you have RR Rom installed I think there is an option to turn on and off the hand wave and/or the "pick-up" sensing.
I found out how to stop the clock and battery circle when I move. You set it by just clicking the Moto app. And turn it off.
It's not done I'm settings. You have to open the app from the home screen.
Trust me, the thing blinking every time I moved when the screen was turned off was driving me nuts!
So, as the title says, I'm having a lot of troubles with ghost touch in my Moto G. Is there any chance to calibrate the touch screen? I remember that I can do that on older phones, but didn't find the option anywhere.
If it helps in anyway, it started several days after it fell off and the screen got broken.
I activated the developer settings and the option that shows the touchs over the screen (sometimes are over six!) and what I do to make it work is putting my hand over the screen and then I unlock it, it kinda "calibrate" the screen in a rusty way.