I had a problem with the radio and went to my dealer and he did a factory reset. When the phone boots it now hangs on the Samsung logo. I was running Darky's v5.2 gingerbread edition voodoo. The phone was rooted and the 3 button function was working ok.
Now I can only use the power+down volume+home combo and it goes into download mode and says Downloading... Do not turn off Target!!!
In this mode neither ADB or Odin will connect. If I do a normal boot Odin will connect but i can't do anything. When I try the power+vol down+home boot it just goes into a reboot loop.
i've read all the tricks to get into recovery mode but none are working for me. I need to get it back to factory original so I can send it for warranty repair. The phone is only 2 months old.
Any ideas welcomed.
i'm having the same problem, i was running darky's v8 then i did a factory reset and now it won't bootup, i can get into download mode but not into recovery mode
1. Threads,for this already exists.
2. Download odin and stock firmware from samfirmwares.com
3. Download 512 pit file.
4 flash csc,modem,pda and pit in odin
panamaggs said:
I had a problem with the radio and went to my dealer and he did a factory reset. When the phone boots it now hangs on the Samsung logo. I was running Darky's v5.2 gingerbread edition voodoo. The phone was rooted and the 3 button function was working ok.
Now I can only use the power+down volume+home combo and it goes into download mode and says Downloading... Do not turn off Target!!!
In this mode neither ADB or Odin will connect. If I do a normal boot Odin will connect but i can't do anything. When I try the power+vol down+home boot it just goes into a reboot loop.
i've read all the tricks to get into recovery mode but none are working for me. I need to get it back to factory original so I can send it for warranty repair. The phone is only 2 months old.
Any ideas welcomed.
Click to expand...
Click to collapse
Put it in odin flash new kernel and unplug usb then you se broken fimware then reflash
Same old story flash Darky rom and now its broke don't ask Darky how to fix it v.
jje
Ajjter said:
1. Threads,for this already exists.
2. Download odin and stock firmware from samfirmwares.com
3. Download 512 pit file.
4 flash csc,modem,pda and pit in odin
Click to expand...
Click to collapse
I've read all the same issue posts but none solve my problem. I can't get Odin to connect to the SG. If I put the SG in download mode with the 3 button combo, Odin won't connect. ADB also can't connect to the SG as the SG won't boot. I've tried everything suggested but it simply won't connect. I guess the SG is now a bin job. The only way to get a connection in Odin is to let the SG boot and hang then connect. Odin can see the SG but you can't do anything unless the SG is in download mode. ADB can't reboot the SG either. Something must be wrong with SBL but I can't find a way to fix it. My fingers are sore from so many 3 key combos over the last few days.
Full brick and leave it in for repair and blame on kies?
Ajjter said:
1. Threads,for this already exists.
2. Download odin and stock firmware from samfirmwares.com
3. Download 512 pit file.
4 flash csc,modem,pda and pit in odin
Click to expand...
Click to collapse
All the thread answers require the use of ADB and or Odin. This is the problem, I can't get the SG to connect to Odin when the SG is in download mode. Something is wrong with the SBL so the download mode isn't working. If I could get the download mode fixed the rest is easy. The only time Odin can see the SG is when I let the SG boot normally and it hangs. Then I connect the USB and Odin sees the SG. As it is not in download mode, Odin can't send anything. ADB gives an error that it can't connect to the device so I can't use ADB to put the SG in dl mode. To summarize, I can only get the SG to either hang on boot or go into a faulty dl mode with the 3 key combo.
Sounds more like a USB problem. Change USB port and or remove and reinstall Kies/USB drivers .
jje
so you could never get into recovery mode or only after he did a reset?
if it's not a usb problem as suggested above then i agree with "Full brick and leave it in for repair and blame on kies?", if they can't get it in dl mode or recovery either they won't know what you've done to it, or they might, so leave that as a last option
Hi!
I tried to upgrade to 2.3 tonight via Kies, and something went wrong.
First, I did a factory reset on the phone before trying to upgrade. Then, during the upgrade, the screen on the phone turned shiny blue a couple of minutes into the process. I left it like that for 30 minutes, but nothing happened.
I then disconnected it, expecting trouble either way.
I can access download mode, but not recovery mode. I started download mode, and tried the kies "emergency recovery". That seemd to work for two minutes, before my screen again turned blue.
So I decided to try something else. Just to see if I could revive my phone, I used this guide: http://forum.xda-developers.com/showthread.php?t=818556
Same problem - My screen turns blue and nothing happens.
I'm kind of hoping some of you guys/girls have a bright idea or two
I could use some help.
Thanks - Ivar
solution is simple : 1. go in download mode (and afterwards plug in the usb)
2. download odin 1.3
3. download XXJPU from samfirmware + 512.pit
4.Start odin 1.3
5.check the repartion box
6.select the PIT file
7.select pda (pda low) file
8.select phone (modem file)
9.select csc (csc file)
click start and pray
Hi
I was trying to root my Galaxy with gingerbread 2.3.3.
I installed Odin3 and downloaded CF-Root-XW_NEE_JVH-v3.2-CWM3RFS put the tar in PDA on Odin, restarted my phone, put it into download mode, pluged in the USB, pressed start, and got a failure notice and that there was a Comm error.
I figured that there was not done anything to the phone since there was a comunitation error, so i unplugged the phone and tryed to start it up, but there was only a black screen with a picture of a phone...Triangle with !...and a PC sign.
I then tryed to look on the web for a clue, and someone was writing that Heimdall was so much better to use.
So i downloaded Heimdall-suite-1.3.1-win32 and opend XXJVT_Heimdall.tar in Heimdall, Connected the Phone in download mode and started the prossess, after a few moments i got error in uploading PIT and the whole thing aborted.
When i try to turn off the phone now, notting happens, not even the black screen with the triangle. Its only download mode that works.
Can someone plz help me? im lost!
If download mode works, it's should let u use odin again or not?
Don't worry. Rule of thumb: if you can get into download mode, you're fine.
Download a firmware of your choice (JVS being the newest, I've literally just flashed it). Boot into download mode and flash the firmware. You'll be back to stock. From here, you can install a custom kernel with root.
same kind of issue with me..the only difference cant get into download mode..stuck on the at&t logo..the phone keeps on flashing a white n black screen..any help?
samsung galaxy note, uk model will not load up, it stays at the samsung logo screen. I tried to hard reset and was unable to get to any other screen other than the samsung logo screen, so that was unsuccessful. I then downloaded odin3 v1.5 and firmware from sammobile: N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar.md5
i followed this post on how to flash:
http://forum.xda-developers.com/showthread.php?t=1389693
after i completed the process, odin stated "pass" the phone restarted but still remained at the logo screen, so that was unsuccessful.
i dont know what to do next. Its been three days since ive used my phone. please help.
thankyou
Try odin 1.85
I had an issue with odin incorrectly flashing roms and when i tried 1.85 its worked on all my phones since, my ace, galaxy s and most recently kl7 on my note.
see if this helps
http://forum.xda-developers.com/showthread.php?t=1386356
alvin1987 said:
samsung galaxy note, uk model will not load up, it stays at the samsung logo screen. I tried to hard reset and was unable to get to any other screen other than the samsung logo screen, so that was unsuccessful. I then downloaded odin3 v1.5 and firmware from sammobile: N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar.md5
i followed this post on how to flash:
http://forum.xda-developers.com/showthread.php?t=1389693
after i completed the process, odin stated "pass" the phone restarted but still remained at the logo screen, so that was unsuccessful.
i dont know what to do next. Its been three days since ive used my phone. please help.
thankyou
Click to expand...
Click to collapse
PIT file
i selected the hyperlink you provided. I am following option 1. i have checked the 'PDA' box, browsed and set the directory for the (XXXXXXXXXXXXXX.tar) file. I am confused with step 6 as you have asked to select a 'pit' file, where can i get this file?
thankyou
just to add..
when i said i had done a hard reset, i used the button combination (volume down + power + home screen button) this did nothing, it did not give me access to another mode, it just stayed on the same logo screen
i followed your link and executed all stages
i followed your link and executed all stages. i found out what the PIT file was, browsed for and added it to the directory. It did not work successfully. i now have the explanation mark sign followed by a message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" problem is kies has no details of my phone and cant connect to my phone.
please help
thankyou
Pit file is attached in "zip" file in the same thread, download firmware from here
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=1#regiona (i think you are in EU somewhere if not change "region" to download your latest Firmware...)
Now follow this
- Run (open) Samsung N7000 Galaxy Note Downloader (Odin3 v 1.85) .
- Check these options: Re-Partition, Auto Reboot, and F. Reset Time.
- Now you have to select Pit file and Firmware files too like this (click & browse):
PIT: Q1_20110914_16GB.pit
PDA: CODE_N7000xxxxx_CL627135_REV02_user_low_ship.tar.m d5
PHONE: MODEM_N7000xxxxx_REV_05_CL1067428.tar.md5
CSC: GT-N7000-MULTI-CSC-Oxxxxx.tar.md5
- Put phone into Download Mode: power off the phone, at the same time press (Volume Down + Home + Power) buttons
- Connect USB cable to phone and make sure the program detect it (Comm 2-Yellow box).
- Click Start button and wait till the program finishes the process.
- After the phone restarted disconnect USB cable.
- If stuck in Boot animation (samsung logo) Take out the Battery, leave it for 5 minutes, and re-insert battery, Press (Volume Up+Menu+Power button) simultaneously to enter Recovery mode, once in recovery Mode, do a factory reset and repeat above process
alvin1987 said:
i followed your link and executed all stages. i found out what the PIT file was, browsed for and added it to the directory. It did not work successfully. i now have the explanation mark sign followed by a message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again" problem is kies has no details of my phone and cant connect to my phone.
please help
thankyou
Click to expand...
Click to collapse
i understand how to retreive the 'PIT' file, and the '.tar' file. However, where do i retreive the 'CSC' and 'Phone' files from.
please help
thankyou
i retreived the PIT file from odin:
u1_02_20110310_emmc_EXT4.pit
Does this file look correct for a PIT file?
If possible can you provide links to the other files i need and pit file, if the one ive displayed about is incorrect. ive noticed in the flash guide for my phone, n7000, it talks about a jig box, which i am not using and have no knowledge of.
thankyou for your kind help
Dear If you have one file other than Pit, then click PDA and browse to this .tar file, click start it will work, if you have 3 files see guide as there in my earlier posts
pit file is attached
alvin1987 said:
i retreived the PIT file from odin:
u1_02_20110310_emmc_EXT4.pit
Does this file look correct for a PIT file?
If possible can you provide links to the other files i need and pit file, if the one ive displayed about is incorrect. ive noticed in the flash guide for my phone, n7000, it talks about a jig box, which i am not using and have no knowledge of.
thankyou for your kind help
Click to expand...
Click to collapse
i done what you said using:
N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar.md5 (uk firmware)
Q1_20110914_16GB.pit
i am now back to the samsung logo screen. However this time you can hear the phone functioning in the background. i can press the volume up/volume down whilst the sound of the phone gets loud or quiet. i can hear messages comming through. i just cant see nothing but the samsung logo flashing.
you said at the end of your link, that if this should happen i should reset phone from recovery and restart the process, how do i do this? how do i enter recovery mode to reset the phone
thankyou for your help, please continue i think we are nearly there
i am grateful
i done what you said using:
N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar.md5 (uk firmware)
Q1_20110914_16GB.pit
i am now back to the samsung logo screen. However this time you can hear the phone functioning in the background. i can press the volume up/volume down whilst the sound of the phone gets loud or quiet. i can hear messages comming through. i just cant see nothing but the samsung logo flashing.
you said at the end of your link, that if this should happen i should reset phone from recovery and restart the process, how do i do this? how do i enter recovery mode to reset the phone
thankyou for your help, please continue i think we are nearly there
i am grateful
- If stuck in Boot animation (samsung logo) Take out the Battery, leave it for 5 minutes, and re-insert battery, Press (Volume Up+Menu+Power button) simultaneously to enter Recovery mode, once in recovery Mode, do a factory reset and repeat above process
I hope r u putting right files in Odin for pda, csc and modem
Sent from my GT-N7000 using xda premium
the only files im using in odin are:
1) PDA: N7000XXKKA_N7000CPWKK3_N7000XXKK5_HOME.tar.md5
2) PIT: Q1_20110914_16GB.pit
these are the only TWO files i have. You said if i have one file other than the PIT file, which would be the PDA file i have stated above then i can click start in odin once the files had been browsed for. what am i doing wrong?
in OPTION 1 of the following link u posted to me:
http://forum.xda-developers.com/showthread.php?t=1386356
it only mentions the PDA and PIT files. It does not mention CSC or PHONE or MODEM files. IF i do need any of them files where exactly can i get them from i been reading through earlier posts of yours yet still cant find them.
Thankyou
ive noticed this file from Dr.Ketan
"Yes itmay be single file after extraction, inthis case select just PDA
DONT SELECT RESET PARTITION"
if i have just a PDA file and a PIT file then im not suppose to select re-partition. in your post in option one of your link you said to select this.