Database Develop

Zuk Z1- Can I Flash CM12.1?

Zuk Z1 CM
Hi
If i buy the Zuk Z1', the chinese version, will i be able to change to CM 12.1?
Thanks

ronflomin said:
Hi
If i buy the Zuk Z1', the chinese version, will i be able to change to CM 12.1?
Thanks
Click to expand...
Click to collapse
Yes.

Life Engineer said:
Yes.
Click to expand...
Click to collapse
Thanks for the answear.
Do you how could i do it?
Will the CM 12.1 will be online so i could download it? and than i will be able to install the CM 12.1 ROM?
Thanks

ronflomin said:
Thanks for the answear.
Do you how could i do it?
Will the CM 12.1 will be online so i could download it? and than i will be able to install the CM 12.1 ROM?
Thanks
Click to expand...
Click to collapse
There are links in another thread here at XDA.
However, some resellers have already flashed CM12.1 to the phone before shipping, for example: http://tinyurl.com/nf2yxdr

mcgangsta said:
There are links in another thread here at XDA.
However, some resellers have already flashed CM12.1 to the phone before shipping, for example: LINK
Hi
I talked with seller and he said that this is android 5.1 and not CM12.1.
If i buy the Android 5.1 how can i flash it to CM12.1?
Thanks
Click to expand...
Click to collapse

ronflomin said:
mcgangsta said:
There are links in another thread here at XDA.
However, some resellers have already flashed CM12.1 to the phone before shipping, for example: LINK
Click to expand...
Click to collapse
Hi
I talked with seller and he said that this is android 5.1 and not CM12.1.
If i buy the Android 5.1 how can i flash it to CM12.1?
Thanks
Click to expand...
Click to collapse
From the screenshots, you can see that it should be CM12.1 _or_ similar. CM12.1 is also Android 5.1.1. Basically the screens look like Cyanogen OS 12.1 in Oneplus One. However, could be some other ROM too.
In any case, you can change the ROM to whatever is available for the device. Instructions and links to Cyanogen OS 12.1 can be found from "how to root zuk z1" thread.

mcgangsta said:
There are links in another thread here at XDA.
However, some resellers have already flashed CM12.1 to the phone before shipping, for example: http://tinyurl.com/nf2yxdr
Click to expand...
Click to collapse
mcgangsta said:
From the screenshots, you can see that it should be CM12.1 _or_ similar. CM12.1 is also Android 5.1.1. Basically the screens look like Cyanogen OS 12.1 in Oneplus One. However, could be some other ROM too.
In any case, you can change the ROM to whatever is available for the device. Instructions and links to Cyanogen OS 12.1 can be found from "how to root zuk z1" thread.
Click to expand...
Click to collapse
Hi
Thank you very much!
I didnt understand most of the things which pepole talked about in the "how to root zuk z1" conversation.
I would really be happy if someone can explain me how to do it? does it final version?
Thanks

mcgangsta said:
From the screenshots, you can see that it should be CM12.1 _or_ similar. CM12.1 is also Android 5.1.1. Basically the screens look like Cyanogen OS 12.1 in Oneplus One. However, could be some other ROM too.
In any case, you can change the ROM to whatever is available for the device. Instructions and links to Cyanogen OS 12.1 can be found from "how to root zuk z1" thread.
Click to expand...
Click to collapse
Do you know where i can find the ZUK Z1, the intrnational version in good price?

ronflomin said:
Do you know where i can find the ZUK Z1, the intrnational version in good price?
Click to expand...
Click to collapse
International version is not released yet
Should be in mid-october or something like that, but there is no confirmation about differences between chinese and international models (other than the software).

I got my zuk z1 today. I have converted to cyanogen. Now I have discovered that my speaker is faulty. Does anyone know how to flash back to stock zui? Please help

limestar said:
I got my zuk z1 today. I have converted to cyanogen. Now I have discovered that my speaker is faulty. Does anyone know how to flash back to stock zui? Please help
Click to expand...
Click to collapse
there are other noticeable bugs. earphone and speaker loudness becomes much quieter with display off (in standby). Double tap to wake doesnt work most of the time, fingerprint sensor also doesnt register sometimes( it might be related to double tap to wake issue). also sometimes the screen takes a few seconds to turn on from standby. dialler if call option is selected as ASK EVERYTIME the first prompt to choose which SIM always disappears with no input, the second time works normally. basically i have to dial 2 times to place a call. these are the bugs that i have noticed so far. SIM issue is also on Yureka so its a 2 SIM phone problem.

@limestar can you explain me how you converted your terminal? which "method" you used?
Thx

Hi this is Limestar. My other account. I followed the guide on modaco forum. Very easy but you have to go to the Cyanogen beta first then do about 4 ota's to get to final CM. Only way to avoid no sound bug
Sent from my Z1 using Tapatalk

[email protected] said:
there are other noticeable bugs. earphone and speaker loudness becomes much quieter with display off (in standby). Double tap to wake doesnt work most of the time, fingerprint sensor also doesnt register sometimes( it might be related to double tap to wake issue). also sometimes the screen takes a few seconds to turn on from standby. dialler if call option is selected as ASK EVERYTIME the first prompt to choose which SIM always disappears with no input, the second time works normally. basically i have to dial 2 times to place a call. these are the bugs that i have noticed so far. SIM issue is also on Yureka so its a 2 SIM phone problem.
Click to expand...
Click to collapse
Have these bugs been fixed through an update?

wildlime said:
Hi this is Limestar. My other account. I followed the guide on modaco forum. Very easy but you have to go to the Cyanogen beta first then do about 4 ota's to get to final CM. Only way to avoid no sound bug
Sent from my Z1 using Tapatalk
Click to expand...
Click to collapse
Hi, can you pls guide me on how to do it ?
i have the same no sound bug issue... I tried the modaco method. it is failing to flash the recovery saying device is locked.
How can i set all things correct ? i am very much disappointed. pls help me....

For you information.
http://www.lenovosj.com/rom/zuk-z1/2702.html

All the CM13's ROM have the same problem: the phone number of came in is "unkown"!

All the CM13's ROM have the same problem: the phone number of came in is "unkown"!
Did anyone meet same ploblem as me?
Describe:
1. when calling in, is whould show the phome number right! same as contacts name.
2. If the call not be answered, the number ( or contact name) can be show right in RECENTS list.
3. The all number of answered call are showed "unknown" in RECENTS list.
Why? soo strange. Where to setting to correct this wrong? Who can help me?
My phone is xiaomi 3C.
Thanks!

Are you cdma user? Ivan's mm has fixed that, but the other roms still have this bug.
update: didn't see you are using mi3c. yes, Ivan already fixed that in his 5.12.1 build. if it really annoys you, try ivan's latest version 5.12.18.

aslike2 said:
Are you cdma user? Ivan's mm has fixed that, but the other roms still have this bug.
update: didn't see you are using mi3c. yes, Ivan already fixed that in his 5.12.1 build. if it really annoys you, try ivan's latest version 5.12.18.
Click to expand...
Click to collapse
Thanks for reply.
I have tried Ivan's rom. It hasnt this problem. I have thought only I have this ploblem. Thank for you message that I was wrong.
yes, I am CDMA user.

wky750 said:
Thanks for reply.
I have tried Ivan's rom. It hasnt this problem. I have thought only I have this ploblem. Thank forz you message that I was wrong.
yes, I am CDMA user.
Click to expand...
Click to collapse
me too! cm13 is no signal even flash the CDMA zip
Sent from my MI 3C using XDA Free mobile app

nokiaer said:
me too! cm13 is no signal even flash the CDMA zip
Sent from my MI 3C using XDA Free mobile app
Click to expand...
Click to collapse
two temporary solutions for no cdma signal:
1. dirty flash from cm 12.1
2. or add these lines to /system/build.prop of cm13.zip and then clean flash
# Telephony property for fixing cdma
ril.subscription.types=NV,RUIM
ro.telephony.default_network=22
Tested on my MI4LTE-CT, should also work on mi3c or mi4c. it causes mobile network FC, but nothing bad else.

aslike2 said:
two temporary solutions for no cdma signal:
1. dirty flash from cm 12.1
2. or add these lines to /system/build.prop of cm13.zip and then clean flash
# Telephony property for fixing cdma
ril.subscription.types=NV,RUIM
ro.telephony.default_network=22
Tested on my MI4LTE-CT, should also work on mi3c or mi4c. it causes mobile network FC, but nothing bad else.
Click to expand...
Click to collapse
Sent from my MI 3C using XDA Free mobile app

Mokee change log: Ivan - Fix unknow number in call log when cdma is a MT call.
Thanks to Ivan!!

wky750 said:
Thanks to Ivan!!
Click to expand...
Click to collapse
It still doesn't work on mokee 1231 nightly, but I guess it will be finally fixed soon.

aslike2 said:
It still doesn't work on mokee 1231 nightly, but I guess it will be finally fixed soon.
Click to expand...
Click to collapse
Thanks Ivan. It's already fixed on mokee 0101 nightly.

CM13 still not work on 0102!
aslike2 said:
Thanks Ivan. It's already fixed on mokee 0101 nightly.
Click to expand...
Click to collapse
Mokee had fixed, I flashed too. But why does CM13 still not work on 0102? Didn't mokee post the change to CM?

wky750 said:
Mokee had fixed, I flashed too. But why does CM13 still not work on 0102? Didn't mokee post the change to CM?
Click to expand...
Click to collapse
Ivan pushed his fix to mokee's source only, so cm didn't get the bug fixed. Since almost all cancro devs are using mi3/4w, I guess they won't fix it too soon because they even don't know this bug exists.
Edit: I‘m happy to say I was wrong, fix showed up in cm13 0103 changelog.

aslike2 said:
Edit: I‘m happy to say I was wrong, fix showed up in cm13 0103 changelog.
Click to expand...
Click to collapse
really? that's great!
btw, where to see the changelog? I always get "err02: Change data unavailable. " from http://www.cmxlog.com/13/cancro/, only
occasionally can get the right result.

wky750 said:
really? that's great!
btw, where to see the changelog? I always get "err02: Change data unavailable. " from http://www.cmxlog.com/13/cancro/, only
occasionally can get the right result.
Click to expand...
Click to collapse
I don't know. I saw it here: https://github.com/CyanogenMod/android_packages_services_Telephony/commits/cm-13.0
I guess very few people use CDMA except for China? Here is about 200 million...

aslike2 said:
ivan pushed his fix to mokee's source only, so cm didn't get the bug fixed. Since almost all cancro devs are using mi3/4w, i guess they won't fix it too soon because they even don't know this bug exists.
Edit: I‘m happy to say i was wrong, fix showed up in cm13 0103 changelog.
Click to expand...
Click to collapse
aslike2 said:
i don't know. I saw it here: https://github.com/cyanogenmod/android_packages_services_telephony/commits/cm-13.0
i guess very few people use cdma except for china? Here is about 200 million...
Click to expand...
Click to collapse
谢谢！那个链接我这儿可用。既然只有中国人用，你也是中国人了？用中文还是方便些。

wky750 said:
???????????????????*??????*????*???????*???????
Click to expand...
Click to collapse
?*??+??*??ID...I should have noticed that...

PUBG!

I've tried many oreo Roms but Pubg seems to automatically close after sometime on all of them. (No unfortunate stop , just goes to homescreen)
So, if anyone knows any good Rom or a fix for that , let me know , that would be very helpful.:fingers-crossed:

shubhankar57 said:
I've tried many oreo Roms but Pubg seems to automatically close after sometime on all of them. (No unfortunate stop , just goes to homescreen)
So, if anyone knows any good Rom or a fix for that , let me know , that would be very helpful.:fingers-crossed:
Click to expand...
Click to collapse
Are you rooted? If you are, try and grab a logcat when the crash occurs. The ROM developer may be able to help you then; simply telling us that it happens isn't going to get the problem fixed.
Does this happen on Android 7.1.1?

Strephon Alkhalikoi said:
Are you rooted? If you are, try and grab a logcat when the crash occurs. The ROM developer may be able to help you then; simply telling us that it happens isn't going to get the problem fixed.
Does this happen on Android 7.1.1?
Click to expand...
Click to collapse
ihave the same problem but on android 7.1.1 or 7.1.2 its work very well and smooth without any single crash
---------- Post added at 03:16 AM ---------- Previous post was at 03:15 AM ----------
shubhankar57 said:
I've tried many oreo Roms but Pubg seems to automatically close after sometime on all of them. (No unfortunate stop , just goes to homescreen)
So, if anyone knows any good Rom or a fix for that , let me know , that would be very helpful.:fingers-crossed:
Click to expand...
Click to collapse
hi man try lineage os 15.1 its work nice without crash

Did you tried LOS OREO?

I've found a solution , currently I'm on RR oreo , but I think it'll work on any oreo Rom,
I found this method -
https://beebom.com/how-improve-pubg-mobile-performance-low-end-devices/amp/
Try the first one , changing the values in configuration file , it worked like a charm and I don't get any lag or automatic close , even on extreme fps.:good:

Pubg works fine for me. Nitrogen rom with zero issues
Sent from my [device_name] using XDA-Developers Legacy app

*# *#4636# *# * Phone Information crashes running v8.1

Hi all,
I am trying to open the Phone Information settings using *# *#4636# *# * and it crashes.
First was running LineageOS 15.1 last version and I thought it was that, then I just changed to Nitrogen OS, wiping System, Data, etc. Clean install and I get same problem.
When I click over Phone Information, crashes with "com.android.phone has stopped" error message.
Is anyone else experiencing this ?
Any advice?
My main target was to enable Volte. I don´t know any other way to get those settings.
Thanks

This seems to be a problem on Oreo ROMs back-ported to N6. Camcory recently patched the AOSIP Oreo ROM and I'm guessing that patch will find its way to other ROMs.
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers

Just for a test, I´ve reinstalled the CM14.1 and it works as it should, I mean, I can access the settings, etc. but "Volte provisioned" is greyed out.
No idea how to enable it.
Ktmom thanks for your information. So, it´s seems is a general 8.1 issue ?? No one has noticed this before?
By the way, related to this matter, How can I access the IMS Settings?

I´ve installed original Google OTA image 7.1 to see how it behaves, and you can access the Phone Information settings, and you can enable/disable all those settings; Volte, WiFi calling, etc.
So it seems LineageOS, Nitrogen, etc they are doing something different.
Cheers

EA1DDO_SGS2 said:
I´ve installed original Google OTA image 7.1 to see how it behaves, and you can access the Phone Information settings, and you can enable/disable all those settings; Volte, WiFi calling, etc.
So it seems LineageOS, Nitrogen, etc they are doing something different.
Cheers
Click to expand...
Click to collapse
As I posted earlier, this problem was recently addressed. A patched release is in the camcory AOSIP thread. I suspect the fix will make it into future releases of other ROMs.
It is a small subset of users who access this feature. It took a long time for the problem to be reported.
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers

This test build
AOSiP-8.1-Test-shamu-20180625.zip
Fixes the problem
Find it @ AFH
Sent from my Motorola Nexus 6 using XDA Labs

maddog3030 said:
This test build
AOSiP-8.1-Test-shamu-20180625.zip
Fixes the problem
Find it @ AFH
Sent from my Motorola Nexus 6 using XDA Labs
Click to expand...
Click to collapse
A patched release is in the camcory AOSIP thread.
Click to expand...
Click to collapse
Got it.
Big thank you.
https://androidfilehost.com/?fid=890278863836296729
I was nearly to brick my Nexus 6 yesterday. After run AquariOS image (to try Volte), something happened and didn´t recognize my pattern unlock, even after wipe system & data from TWRP, restore backup, etc.
That´s the reason I had to fastboot original OTA image. A nightmare. Now all is back in order, apparently.

was there a solution to the problem?
Up!)

rostop4a said:
was there a solution to the problem?
Up!)
Click to expand...
Click to collapse
These are the commits to fix.
Settings
Device

rostop4a said:
was there a solution to the problem?
Up!)
Click to expand...
Click to collapse
Did you read the thread? The (only) solution was discussed .

EA1DDO_SGS2 said:
Got it.
Big thank you.
https://androidfilehost.com/?fid=890278863836296729
I was nearly to brick my Nexus 6 yesterday. After run AquariOS image (to try Volte), something happened and didn´t recognize my pattern unlock, even after wipe system & data from TWRP, restore backup, etc.
That´s the reason I had to fastboot original OTA image. A nightmare. Now all is back in order, apparently.
Click to expand...
Click to collapse
The link seems dead. any other place? i need to enable VOLTE too.

chuckiler said:
The link seems dead. any other place? i need to enable VOLTE too.
Click to expand...
Click to collapse
The camcory AOSiP 8.1 [Official] thread. Else go on android file host and search for developer camcory then look for the shamu ROMs.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini

camcory said:
These are the commits to fix.
Settings
Device
Click to expand...
Click to collapse
:good:
And what should I do about it?
Just that it would be clear! =)

rostop4a said:
:good:
And what should I do about it?
Just that it would be clear! =)
Click to expand...
Click to collapse
Three possibilities:
- build a rom yourself with the fixes
- ask the person who builds your rom to include them
- use a rom where they are already included

Delete

:good:Thank you for the hard work

vlad3647 said:
:good:Thank you for the hard work
Click to expand...
Click to collapse
Naaaa...Tanks to @pduper:silly:

Many thanks to you @luisgonzales1977 for your work.
sm-g900i
Formatted and advanced cleaned
Installed Bliss-v12.2-klte-UNOFFICIAL-20200128 and open_gapps-arm-10.0-pico-20200124 together
Rom is very nice.
I have noticed that audio levels are low and device lags while in settings menu.
Anyone else experiencing this?

pmduper said:
Many thanks to you @luisgonzales1977 for your work.
sm-g900i
Formatted and advanced cleaned
Installed Bliss-v12.2-klte-UNOFFICIAL-20200128 and open_gapps-arm-10.0-pico-20200124 together
Rom is very nice.
I have noticed that audio levels are low and device lags while in settings menu.
Anyone else experiencing this?
Click to expand...
Click to collapse
yes...I installed earlier and I think its the best of the new Android 10 Roms for our device....I installed the Intelli Kernel and raised the volume levels....the lag in settings is a pain... I noticed the gear on the footer of quick settings wont work unless you bring the pull down all the way out....My guess is an overlay is probably in conflict with the system ui

Test Build Upload ...
Download.

luisgonzales1977 said:
Test Build Upload ...
Download.
Click to expand...
Click to collapse
Would love to test this but very happy with your other test build MSM Xtended that I have been using it all day with no problems..thanks again for the work you are putting into these roms

Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only

Skerleton said:
Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only
Click to expand...
Click to collapse
You have to know that android 10 is Beta Stage. If you don't want to face these bugs, you can simply go back to LOS 16, which is stable.
Bluetooth problem is always issue since LOS 15.1, so you'd better not expect to fix it in few days only.
See curiousrom's post that says you should don't press devs to fix these issues since they do volunteering. Therefore, if you keep this attitude, you will be sad because no one will develop any roms then.

SmgKhOaRn said:
You have to know that android 10 is Beta Stage. If you don't want to face these bugs, you can simply go back to LOS 16, which is stable.
Bluetooth problem is always issue since LOS 15.1, so you'd better not expect to fix it in few days only.
See curiousrom's post that says you should don't press devs to fix these issues since they do volunteering. Therefore, if you keep this attitude, you will be sad because no one will develop any roms then.
Click to expand...
Click to collapse
Lineage os is ****..best pie os is DOT OS 3.1

Skerleton said:
Lineage os is ****..best pie os is DOT OS 3.1
Click to expand...
Click to collapse
Wrong thread mate. Take your disrespectful comments elsewhere!!

Skerleton said:
Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only
Click to expand...
Click to collapse
Oh no!! And on top of all that mummy didn't give you any lunch money! I feel for you my friend, I really do. It must be so tough going through life with no respect for anyone, especially when they are working hard and free of charge to bring your aging device up to date, God that sucks doesn't it.l?! Tell you what, you go and enjoy your pie and the grown ups will come and let you know when all these iddy biddy widdle bugs have gone.

I can't download the link, because the file was deleted.
Who can give me a download link?
Thanks!

Access denied where can I download the rom?

n_boy86 said:
Access denied where can I download the rom?
Click to expand...
Click to collapse
Try this link ?
https://qc5.androidfilehost.com/dl/...3197/Bliss-v12.2-klte-UNOFFICIAL-20200130.zip

I expected many Problems when migrating to a q Rom. Waited until today and started with Bliss.
And all i can say is that this Rom is awesome in responsiveness and Options. Everything is working so far. Only Thing is that there is no selinux set for now.
But that is okay. Everything else just works amazingly good!
Phone (with Recorder outofthebox), Camera, all Google Apps, WiFi, Mobile Data, Magisk
Also my 128g sd was set up as adopted storage and uses f2fs by Default. Nice!
Not a single glitch or freeze.
Will consider using this as my daily Driver.
Coming from LineageOS16
Big thanks to the devs from bliss project and OP of this Thread!!!!

Thinking about formating my DATA and CACHE also as F2FS. Would that Work and is that a good Idea? What do you think? More over is it possible to use also System as F2FS with Bliss?
Would really appreciate it.
And i found a little bug with gboard. There is a little unused space between my navbuttons and the bottom of my gboard. Is there an Option to Change that?
Thanks

ajox said:
Thinking about formating my DATA and CACHE also as F2FS. Would that Work and is that a good Idea? What do you think? More over is it possible to use also System as F2FS with Bliss?
Would really appreciate it.
And i found a little bug with gboard. There is a little unused space between my navbuttons and the bottom of my gboard. Is there an Option to Change that?
Thanks
Click to expand...
Click to collapse
I think its better to change only cache partition because f2fs is unstable due to our kernel version.
when I used this rom with tuned kernel, f2fs all, apps stopped frequently so I had to reboot a lot of time. This is just my opinion.
You have to disable gesture navigation bar to remove that blank.

SmgKhOaRn said:
I think its better to change only cache partition because f2fs is unstable due to our kernel version.
when I used this rom with tuned kernel, f2fs all, apps stopped frequently so I had to reboot a lot of time. This is just my opinion.
Click to expand...
Click to collapse
Did You try that with intelli Kernel, too? But as you said the rom is generally capable to usw F2FS formated system Partition right?
Think i will give it a chance this weekend.
SmgKhOaRn said:
You have to disable gesture navigation bar to remove that blank.
Click to expand...
Click to collapse
Thought about something like that. Anyway i dont find such setting... Maybe iam blind?

ajox said:
Did You try that with intelli Kernel, too? But as you said the rom is generally capable to use F2FS formated system Partition right?
Think i will give it a chance this weekend.
Thought about something like that. Anyway i dont find such setting... Maybe iam blind?
Click to expand...
Click to collapse
IDK since I don't like that kernel...
I didn't tested on this rom (using other Q rom now) so You can try and tell about the results... (Backup data first, don't need it on cache if you want...)
Just search it in setting's search section (type gesture if you can't find)...
Or remove qemu.hw.mainkeys=0 in build prop...
Can't use f2fs in System partition lol...
It will force to install as ext4 even you format it to f2fs...
This is all same in other roms...