Hello,
I have a P10 lite (WAS-LX1A) on a carrier rom (Orange C109) and i'd like to flash an European one (C432)
Can i flash it using this methode directly over my current fimware :
Download both B123 Firmware and CUST from the links available and then extract at the PC.
Now Copy update.app file from Firmware extracted contents to dload folder at micro SD Card. [If already not exists then first create a new folder and rename it with dlaod, then copy the firmware update.app file]
Then turn off and reboot P10 Lite While holding pressed the VOL DOWN+ UP+ POWER Buttons all together for a few seconds.
The installation initiates and completes, wait until completion.
Now remove the install update.app file from dload where you have copied.
Then Copy the update.app from CUST extracted contents at dload folder.
Now again power off and reboot P10 Lite while holding the above buttons to install CUST package also.
Finally, the device reboots.
Done!
or is there other solution please?
Related
I had some issue after updating to B370 OTA so I decided to reflash my phone. I was able to flash L09C432B360 FullOTA-MF-PV update.app from update.zip. However I tried to flash update_data_full_hw_eu.zip by extracting all files and putting them in the dload folder on SD and going vol + & vol - method, it runs the updater really quickly but does not install anything new on my phone and my bluetooth doesn't work and other stock apps are missing. Can anyone help?
Thanks,
Have the same question. Since the huawei updater method don't work for me.
Same for me, any idea??
You don't have to use all the files from "data_full...", you just need the update.app for dload. Try a reflash.
install the zip with TWRP
I noticed number of people not got Nought in P9 due to Bad Firmware Updated.
i found method from internet.
i dint no will void warranty or not but definitely people get Nought and further updated via OTA
First Method use for Downgrade till B180
Backup all important data
Charge Battery up to 50%
Enable OEM unlock in developer options
Make dload folder on sd card
Extract update.zip and copy update.app to dload folder, Switch off your phone and hold 3 buttons (volume up, volume down, and power) until you see update start screen.
Follow next steps only if 1st file installed successfully
Remove update.app file from dload folder.
After that extract “update_data_full_hw_meafnaf.zip” and move all files to dload folder and install it, using 3 button force update method (Switch off your phone and hold 3 buttons (volume up, volume down, and power) until you see update start screen.
Second Method Update to Nought
Enable OEM unlock in developer options
Download Huawei updater from This Link
Download latest Hisuite from official huawei website.
Open huawei updater, tick in custom rom, in custom rom version type EVA-L19C185B385
In Custom rom URL copy this link http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1583/g104/v80560/f2/
Then tick custom port, don’t change it.
now connect your phone with pc and make sure Hisuite recognizes and connected properly. then just open Hisuite menu and change network settings as shown in image below.
Source : http://ministryofsolutions.com/2017...gat-b385-update-emui5-middle-east-africa.html
I can access fastboot. Phone unlock & frp unlock but when i try to flash something i get remote command not allowed
download original firmware for your device e.g. L09C432B386 (the firmware most people on this forum use, is the most up to date from Huawei)
Extract from the zip file the UPDATE.APP file and move it to an external sd card with folder "dload" (without quotation marks)
Then turn off phone. Then hold volume up + down and Power button at same time.
Your phone will then force flash the UPDATE.APP file which will give you stock rom again.
Alternatively, if your fastboot works and you want to flash Lineage, you can flash (through adb) TWRP recovery and then flash lineage.
EDIT:
I used this link (not mine) to download stock firmware. Choose whichever one is best for you:
https://mega.nz/#F!w41RmZKB!IG53JadhjUKgFK8anbctIw!988RHBpK
If you have a decent internet connection, should finish downloading firmware in 20 mins?
Also heads up, you need both the update.zip and the update_data_full...zip. Flash the UPDATE.APP in the update.zip file and then flash the UPDATE.APP in the update_data_full...zip file after. If you only flash the update.zip, you will be stuck in setup wizard.
Zyn0 said:
download original firmware for your device e.g. L09C432B386 (the firmware most people on this forum use, is the most up to date from Huawei)
Extract from the zip file the UPDATE.APP file and move it to an external sd card with folder "dload" (without quotation marks)
Then turn off phone. Then hold volume up + down and Power button at same time.
Your phone will then force flash the UPDATE.APP file which will give you stock rom again.
Alternatively, if your fastboot works and you want to flash Lineage, you can flash (through adb) TWRP recovery and then flash lineage.
EDIT:
I used this link (not mine) to download stock firmware. Choose whichever one is best for you:
https://mega.nz/#F!w41RmZKB!IG53JadhjUKgFK8anbctIw!988RHBpK
If you have a decent internet connection, should finish downloading firmware in 20 mins?
Also heads up, you need both the update.zip and the update_data_full...zip. Flash the UPDATE.APP in the update.zip file and then flash the UPDATE.APP in the update_data_full...zip file after. If you only flash the update.zip, you will be stuck in setup wizard.
Click to expand...
Click to collapse
Thanks bro
hi,
i need some help flashing these to my bricked p8 lite 2017 PRA-LA1 phone! ive got hold of the files for my phone same version as earlier;
update.zip
update_data_full_public.zip
update_full_PRA-L01_hw_meafnaf.zip
update_full_PRA-L21_hw_meafnaf.zip
wbr
ReyTech said:
hi,
i need some help flashing these to my bricked p8 lite 2017 PRA-LA1 phone! ive got hold of the files for my phone same version as earlier;
update.zip
update_data_full_public.zip
update_full_PRA-L01_hw_meafnaf.zip
update_full_PRA-L21_hw_meafnaf.zip
wbr
Click to expand...
Click to collapse
You have PRA-LA1 so L01 and L21 probably will not work, find LA1 first.
Installation Instructions
Take a full backup of your important data before proceeding.
Download “update.zip” and “update_full_PRA-LA1_hw_meafnaf.zip”.
Connect your device to your computer via USB and create a new folder “dload” in the external microSD card or internal memory.
Now unzip the “update.zip” package and copy the extracted UPDATE.APP file to the new dload folder you created in the previous step.
Now with phone off press vol +, vol - and power at same time and release on boot. If the installation succeeds proceed to the next step otherwise try installing this update with TWRP.
Once your phone starts up, replace the UPDATE.APP package from dload folder with UPDATE.APP package extracted from the cust package (“update_full_PRA-LA1_hw_meafnaf.zip”).
Now install this package by repeating steps above.
TWRP Method
This method requires your phone to have a custom recovery like TWRP. Simply download both the packages from above and copy them to your device. Now reboot into TWRP mode, take a full backup, and then install both packages (update.zip first). Reboot your phone normally upon completion.
I hope this helps.
.
P9 EVA-L09. I am trying to get original firmware.
The phone was rooted. I relock the bootloader using adb. After that phone has stuck in Huawei eRecovery and can't download firmware.
I use the dload method to perform upgrade. I have downloaded few months ago two zip files.
First copy only the UPDATE.APP (~2GB) file to dload folder on sdcard. Then phone start working. After that from the other zip replace, put the all files
in dload folder. Upgrading was successful, but few apps are missing - camera, contacts and etc -> example ?
Trying this image says: installing updates fails after 10-15%.
Can you suggest me how to fix it or may another image to use?
Thanks in advance !
netaccs said:
P9 EVA-L09. I am trying to get original firmware.
The phone was rooted. I relock the bootloader using adb. After that phone has stuck in Huawei eRecovery and can't download firmware.
I use the dload method to perform upgrade. I have downloaded few months ago two zip files.
First copy only the UPDATE.APP (~2GB) file to dload folder on sdcard. Then phone start working. After that from the other zip replace, put the all files
in dload folder. Upgrading was successful, but few apps are missing - camera, contacts and etc -> example ?
Trying this image says: installing updates fails after 10-15%.
Can you suggest me how to fix it or may another image to use?
Thanks in advance !
Click to expand...
Click to collapse
Did you restore stock ROM (by eg HWOTA) before relocking - because (re)locking invokes Factory reset. There was also another report of similar brick bexause of relocking with rooted or custom ROM.
No I am not. It was stock rom which I rooted.
I am trying several update.app but when processi is complete always something wrong. No all apps installed or keyboard missing and etc.
Can you suggest me what and how to try to install?
I found this link with images.
I am downloading both B136. First I have to copy UPDATE.APP to dload folder on sdcard from update.zip. Then delete update.app from dload
and extract all from B360_update_data_full_hw_eu.zip to dload folder and again perform upgrade (turn off the phone, then holding vol up + vol down + power key
until logo display)
Is that correct?