Hello, it's been a while since I've rooted a phone and have never done it on this one. It has been stock up till now so what do I need to do?
Is there a video with the process somewhere? Also would like to have recovery and baseband ready for intalling ROMs.
Thank you for any help.
Android version 6.0.1
Kernel 3.10.40-9385989
KNOX 2.6
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-910T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X0
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Also should I update first?
OK so I got impatient waiting for an answer and used the root guide sticky in the Note 4 General section for the N910T except I updated a couple things. Samsung USB drivers installed: v1.5.63.0 and used Odin3 v3.12.3 to install the cf-auto-root file (latest from site) and then installed recovery TWRP 3.1.1
I think I'm going to stop now to backup things with titanium backup, then update to latest ROM+baseband. Hopefully can find it. Not fond of the search on this site.
FrankthaTank said:
OK so I got impatient waiting for an answer and used the root guide sticky in the Note 4 General section for the N910T except I updated a couple things. Samsung USB drivers installed: v1.5.63.0 and used Odin3 v3.12.3 to install the cf-auto-root file (latest from site) and then installed recovery TWRP 3.1.1
I think I'm going to stop now to backup things with titanium backup, then update to latest ROM+baseband. Hopefully can find it. Not fond of the search on this site.
Click to expand...
Click to collapse
Use this to download your stock firmware. Samfirm. Don't use the website they post. Use the deprecated software. Scroll down and read directions and download software.
Type in your model and csc. Click 'auto', 'check crc', 'decrypt '. Then start. It'll download your firmware.
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
2. Once you update and setup phone. Then install twrp 1st. Use it to make a backup of at least your EFS and modem. Or a complete backup. Keep it for safe keeping.
3. Then root your phone from within twrp with supersu zip. From here.
https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
There you go!
aaron74 said:
Use this to download your stock firmware. Samfirm. Don't use the website they post. Use the deprecated software. Scroll down and read directions and download software.
Type in your model and csc. Click 'auto', 'check crc', 'decrypt '. Then start. It'll download your firmware.
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
2. Once you update and setup phone. Then install twrp 1st. Use it to make a backup of at least your EFS and modem. Or a complete backup. Keep it for safe keeping.
3. Then root your phone from within twrp with supersu zip. From here.
https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
There you go!
Click to expand...
Click to collapse
Thanks for the detailed explanation. Just one question though.. When you say 'Type in your model and csc', did you mean 'Model and Region'? Thanks again.
rsn7 said:
Thanks for the detailed explanation. Just one question though.. When you say 'Type in your model and csc', did you mean 'Model and Region'? Thanks again.
Click to expand...
Click to collapse
Yes, correct!
Example:
SM-N910T
TMB
aaron74 said:
Yes, correct!
Example:
SM-N910T
TMB
Click to expand...
Click to collapse
Thank you Aaron!
aaron74 said:
Yes, correct!
Example:
SM-N910T
TMB
Click to expand...
Click to collapse
curious, why would you root SM-N910T using this method instead of using CF-Autoroot ?
Would anyone care to help a new galaxy note 4 owner get his phone rooted.
elimoviebuff said:
Would anyone care to help a new galaxy note 4 owner get his phone rooted.
Click to expand...
Click to collapse
[SM-N910*] CF-Auto-Root is still the best rooting method
https://forum.xda-developers.com/note-4/help/sm-n910-cf-auto-root-t2897428
Related
Hello,
I am trying to root my samsung and everything going great while am following the steps to root it by Odin, when it gives me the PASS message I do remove the USB. Then I use Root Checker app but it seems not working:crying: and i tried downloading Freedom app to make sure that if my phone is rooted or not, but still gives me the message that my phone need to be rooted. anyways my phone status picture attached and thank you.
gackno said:
Hello,
I am trying to root my samsung and everything going great while am following the steps to root it by Odin, when it gives me the PASS message I do remove the USB. Then I use Root Checker app but it seems not working:crying: and i tried downloading Freedom app to make sure that if my phone is rooted or not, but still gives me the message that my phone need to be rooted. anyways my phone status picture attached and thank you.
Click to expand...
Click to collapse
What are you rooting with ???
jje
JJEgan said:
What are you rooting with ???
jje
Click to expand...
Click to collapse
I already mentioned Odin and the I tried 30.7 and the previous versions
no, Odin is a tool for flashing files to your phone.
What are you flashing?
Use this method as it's pain free.
Why use this Root Method? Well the main reasons are:
- You have a complete Odin Flashable ROM Package.
- No Insecure Kernels are used or required.
- You can flash these packages on Non-Rooted devices
- The Binary Flash Counter will NOT increase when flashing these ROM Packages.
- The Red Exclamation Mark will NOT appear at boot up.
- And finally, you only have to flash one file in Odin and you have a complete firmware including Root Permissions.
What Root Package is used in these ROMs?
- Busybox 1.20.2 (Newer ROMs)
- SuperSU 0.99 (Newer ROMs)
Previously released ROMs may have an older Busybox and SuperSU package installed.
http://forum.xda-developers.com/showthread.php?t=1942150
gackno said:
I already mentioned Odin and the I tried 30.7 and the previous versions
Click to expand...
Click to collapse
Thats why it does not work Odin is not root you just flash nothing but thin air .
jje
Raistlin1158 said:
Use this method as it's pain free.
Why use this Root Method? Well the main reasons are:
- You have a complete Odin Flashable ROM Package.
- No Insecure Kernels are used or required.
- You can flash these packages on Non-Rooted devices
- The Binary Flash Counter will NOT increase when flashing these ROM Packages.
- The Red Exclamation Mark will NOT appear at boot up.
- And finally, you only have to flash one file in Odin and you have a complete firmware including Root Permissions.
What Root Package is used in these ROMs?
- Busybox 1.20.2 (Newer ROMs)
- SuperSU 0.99 (Newer ROMs)
Previously released ROMs may have an older Busybox and SuperSU package installed.
http://forum.xda-developers.com/showthread.php?t=1942150
Click to expand...
Click to collapse
thanks for the advice I'll try to make it up with it
Glebun said:
no, Odin is a tool for flashing files to your phone.
What are you flashing?
Click to expand...
Click to collapse
I am trying to root my phone ... I follow the tutorials that I find online but it is not working .. so is there something I am missing? I just want to know the way how to root my samsung and thank you
JJEgan said:
Thats why it does not work Odin is not root you just flash nothing but thin air .
jje
Click to expand...
Click to collapse
Ok then how could I root my samsung and what are the requirements that I have to do? thank you
This is what I am getting in the attachment
so again, what are you flashing?
Hi,
Here is Drive link for firmware N910FXXU1COI1 Netherlands (Vodafone), if you want a fast download
Drive Link N910FXXU1COI1
The firmware N910FXXU1COI1 is working fine but:
- Root is working finally... link to thread Kernel ROOT in 5.1.1 - Selinux Permissive - FOR N910F by zamcum
- No theme support
- Recent Applications button working great, lot of apps to choose from
- Samsung Smart Manager App
- Nice Animations
- Smooth and Fast
Installing ROM
- unpack archive
- put your phone in Download mode
- run ODIN with "Run as Administrator"
- in ODIN click AP and open ROM file
- press Start
Installing Root after flashing ROM
- Install TWRP 2.8.7.0 with Odin
- Flash within TWRP the Kernel (ZIP) posted in this thread Kernel ROOT in 5.1.1 - Selinux Permissive - FOR N910F by zamcum
- Restart TWRP and will ask you to install SuperSU, install it
- After restart run SuperSU, will ask to update SuperSU from market, install, update binaries
Enjoy 5.1.1 rooted on your Note4 N910F
Thanks bro !
I can flash this ROM with Rodin like lollipop ?
of course with full wipe
Flash with Odin
Wipe Data is not required if you come from TW Rom
Happy flashing...
Is this the Italian branded "Three" ROM?
I am currently upgrading to think after flashing the relevant BOC3 ROM.
What region is this?
For the knox counter is ok? Don't change anything?
sweden(tre)
Has anyone successfully flashed this gdrive firmware?
I tried it twice on my BTU 910F, and twice it failed near the end.
Any remedy?
Yes I've flashed it fine. You will more than likely need to flash a pit file to repartition your phone in line with the content/partition sizes of this particular firmware. It isn't really uncommon.
I've noticed the forum is swamped with similar posts of similar problems so have a search. I read this morning that someone had posted a tutorial on how to get around this.
sent from my Galaxy Note 4
Link
How frustrating, I have a working link but can't paste it as I haven't reached 10 posts.
I'll say that I went to stackoverflow and searched for "google drive limit number of download", which has a solution to re-present the original firmware download url in a way that can be downloaded
Sorry I can't just paste the links, but I understand why
Steve
How to solve the problem rooting not possible?
not working anymore, try mega links
Download Link
Updated link on first post, sorry...
Works perfectly. I had to retar the archive as explained in other threads by removing hidden.img and cache.img, since I had the infamous "too big" error message. After few hours of trials, everything seems fine and indeed the UX is significantly smoother. I have a 910F model.
In English then.... How can I download it?
There's no working link to it, anywhere I can find!?
FrankOne said:
There's no working link to it, anywhere I can find!?
Click to expand...
Click to collapse
Reedited the first post with click link to download file.
Happy flashing...
Action memo doesn't work with this rom!
I just noticed that too. I installed the one on Mega.
Sent from my SM-N910F using XDA Free mobile app
metal_ghost said:
Reedited the first post with click link to download file.
Happy flashing...
Click to expand...
Click to collapse
awesome - so just a standard odin flash yeah? I've only ever had the problem of the "not enough space" message when I tried going backwards to a uk EE version of 5.01. This is a standard unlocked version? There's people talking about it being 3 software?
FrankOne said:
awesome - so just a standard odin flash yeah? I've only ever had the problem of the "not enough space" message when I tried going backwards to a uk EE version of 5.01. This is a standard unlocked version? There's people talking about it being 3 software?
Click to expand...
Click to collapse
Yes it has 3 boot animation and software, but you can uninstall 3 software.
Hi,
Is ROOT(ing) possible without re-install the whole phone?
Information and links are welcome
Use kingroot, its on xda.
Then use super sume to remove the Chinese elements and replace with SuperSU.
Thanks for you suggestion!
Unfortunately it does not work on my (SM-G800F) Phone even it is listed as a supported device.
Also no luck with the KingRoot v3.0 Desktop version.
Anyone have the knowledge for rooting this phone whithout re-install everithing on it?
Sorry I too have an 800F and its worked a great for me.
I used version 4.5 of kingroot
irishdh said:
Sorry I too have an 800F and its worked a great for me.
I used version 4.5 of kingroot
Click to expand...
Click to collapse
There are four differend G800 models mabe that is one the reason(s)?
irishdh said:
Sorry I too have an 800F and its worked a great for me.
I used version 4.5 of kingroot
Click to expand...
Click to collapse
Hello, does this method root s5 mini without tripping knox? thx
Vaako said:
Hi,
Is ROOT(ing) possible without re-install the whole phone?
Information and links are welcome
Click to expand...
Click to collapse
Just reboot into odin, and flash this auto tool
https://download.chainfire.eu/402/CF-Root/CF-Auto-Root/CF-Auto-Root-k3g-k3gxx-smg900h.zip
credits go to @Chainfire
Thanks for the link.
The file you mention is normaly for the smg900h (S5) but I have the smg800f (S5 mini).
I think it's not possible to use 'H' on a 'F' version!?
Found it: https://download.chainfire.eu/523/C...inilte-kminiltexx-smg800f.zip?retrieve_file=1
jonathanmohamed said:
Just reboot into odin, and flash this auto tool
https://download.chainfire.eu/402/CF-Root/CF-Auto-Root/CF-Auto-Root-k3g-k3gxx-smg900h.zip
credits go to @Chainfire
Click to expand...
Click to collapse
If we use @Chainfire methode to root our device, do we need to re-install all our apps as it would on a new clean install or wil all our apps still be there after a re-boot ?
No you will NOT loose any data.
Vaako said:
If we use @Chainfire methode to root our device, do we need to re-install all our apps as it would on a new clean install or wil all our apps still be there after a re-boot ?
Click to expand...
Click to collapse
So sorry for the late reply. No the chainfire method does not wipe any data or applications. Just flash the file and it will root and do everything itself. Hench the name "autoroot."
Thanks for making this clear!
Okay, so we need to use ODIN v3.xx and put the phone in download mode by pressing Vol-Down + Home + Power button till it comes into recovery mode, having ODIN already running with administrator rights and than plug-in the micro-usb cable.
I guess we need to use PDA button to load the file, do we have to tick other options as well ?
Thanks for the help !!!!
I just rooted my SM-G800F with this file: CF-Auto-Root-kminilte-kminiltexx-smg800f.zip and I can confirm that all my apps and data are intact :good:
Choose the file acoding to your phone:
SM-G800F https://download.chainfire.eu/523/CF-Root/CF-Auto-Root/CF-Auto-Root-kminilte-kminiltexx-smg800f.zip
SM-G800H https://download.chainfire.eu/524/CF-Root/CF-Auto-Root/CF-Auto-Root-kmini3g-kmini3gxx-smg800h.zip
SM-G800M https://download.chainfire.eu/525/CF-Root/CF-Auto-Root/CF-Auto-Root-kminilte-kminilteub-smg800m.zip
SM-G800r4 https://download.chainfire.eu/676/C...uto-Root-kminilteusc-kminilteusc-smg800r4.zip
SM-G800Y https://download.chainfire.eu/526/CF-Root/CF-Auto-Root/CF-Auto-Root-kminilte-kminiltedv-smg800y.zip
All credits goes to Chainfire !!!!
A threat about CF-Auto-Root is here: [CENTRAL] CF-Auto-Root
Vaako said:
I just rooted my SM-G800F with this file: CF-Auto-Root-kminilte-kminiltexx-smg800f.zip and I can confirm that all my apps and data are intact :good:
Choose the file acoding to your phone:
SM-G800F https://download.chainfire.eu/523/CF-Root/CF-Auto-Root/CF-Auto-Root-kminilte-kminiltexx-smg800f.zip
SM-G800H https://download.chainfire.eu/524/CF-Root/CF-Auto-Root/CF-Auto-Root-kmini3g-kmini3gxx-smg800h.zip
SM-G800M https://download.chainfire.eu/525/CF-Root/CF-Auto-Root/CF-Auto-Root-kminilte-kminilteub-smg800m.zip
SM-G800r4 https://download.chainfire.eu/676/C...uto-Root-kminilteusc-kminilteusc-smg800r4.zip
SM-G800Y https://download.chainfire.eu/526/CF-Root/CF-Auto-Root/CF-Auto-Root-kminilte-kminiltedv-smg800y.zip
All credits goes to Chainfire !!!!
A threat about CF-Auto-Root is here: [CENTRAL] CF-Auto-Root
Click to expand...
Click to collapse
Hi, I'm a little bit confused here. Are we talking about the same context, i.e., an SM-G800[x] running Android 5.1.1? The landing page of the official repository states explicitly that "CF-AUTO-ROOT IS CURRENTLY NOT OPERATIONAL FOR ANDROID 6.0+, OR SAMSUNG ON ANDROID 5.1+".
Besides that, the download page doesn't list Lollipop versions, only 4.4.x.
Cheers
@RGold55
Yes there is only 4.4.2 supported
Read the obove text line: CF-Auto-Root Repository
CF-AUTO-ROOT IS CURRENTLY NOT OPERATIONAL FOR ANDROID 6.0+, OR SAMSUNG ON ANDROID 5.1+
Vaako said:
@RGold55
Yes there is only 4.4.2 supported
Read the obove text line: CF-Auto-Root Repository
CF-AUTO-ROOT IS CURRENTLY NOT OPERATIONAL FOR ANDROID 6.0+, OR SAMSUNG ON ANDROID 5.1+
Click to expand...
Click to collapse
So you did ok by rooting your G800 KK Android, as I did to mine last year, with that very same flashable. But, alas, CF-Autoroot for Lollipop is still in the dream stage.
Hey,
I'd like to root my SM-T710 running 6.0.1 but I wasn't able to find a guide anywhere. Could someone please help me? Thanks.
This helped me
http://forum.xda-developers.com/tab-s2/general/sm-t710-6-0-1-t710xxu2cpd9-marshmallow-t3371545
RoelAFCA said:
This helped me
http://forum.xda-developers.com/tab-s2/general/sm-t710-6-0-1-t710xxu2cpd9-marshmallow-t3371545
Click to expand...
Click to collapse
Hey! Yeah, I ended up using the Autoroot method. Thanks for the help though
RoelAFCA said:
This helped me
http://forum.xda-developers.com/tab-s2/general/sm-t710-6-0-1-t710xxu2cpd9-marshmallow-t3371545
Click to expand...
Click to collapse
Hey I followed the instructions in that link, but I still have a problem. I still can't get root on my Tab S2. When I try to open Super SU it says There is no SU binary installed and Super SU cannot install it blah blah can you help me?Thank you!
riane9 said:
Hey I followed the instructions in that link, but I still have a problem. I still can't get root on my Tab S2. When I try to open Super SU it says There is no SU binary installed and Super SU cannot install it blah blah can you help me?Thank you!
Click to expand...
Click to collapse
First of all: which model Tab S2 do you have? You need the the recovery that matches you Tab model. I also used the latest SuperSU beta, link
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
1. I first flashed MM 6.0.1 using Odin, the I booted.
2. Flashed TWRP (latest) via Odin.
3. Booted into recovery and flashed SuperSU and Xposed. Everything seems to work fine.
RoelAFCA said:
First of all: which model Tab S2 do you have? You need the the recovery that matches you Tab model. I also used the latest SuperSU beta, link
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
1. I first flashed MM 6.0.1 using Odin, the I booted.
2. Flashed TWRP (latest) via Odin.
3. Booted into recovery and flashed SuperSU and Xposed. Everything seems to work fine.
Click to expand...
Click to collapse
Thank you for your reply, but I already sorted it out. I flashed the CF autoroot from this link https://autoroot.chainfire.eu/ and it works perfectly. No need to flash twrp.
Sorry to resurrect this but since this thread largely answers me I just had one question.
Autoroot's website says :
UNLOCK BOOTLOADERS
If you have locked bootloaders, flashing one of these will probably brick your device
I have the SM-T710 running stock OTA 6.0.1. Website says brick if bootloader is locked. Just trying to clarify if I can run Autoroot or not. Having lost a PC this week I don't want to add a tablet to the graveyard.
You'll be fine.
whats the benefit of rooting device.
sirgroh said:
whats the benefit of rooting device.
Click to expand...
Click to collapse
http://bfy.tw/gT2
Hi guys, Tested and worked on
Model : G925A
Build number : MMB29K.G925AUCS5DPJ1
Baseband Version : G925AUCS5DPJ1
Android Version : 6.0.1
If you want my firmware you can find it here
Flash Via Odin.
If dont work for you than when i have time i will modify to work for you you send me build and baseband than we will see.
PS : I dont take any responsibility for anything.
If i help you just hit thanks nothing more.
has anyone try this?
No funciona
No funciona yo lo prbe y mi telefono no encendio mas.
MOD EDIT:
Per the forum rules, all posts must be made in the English language.
@diart
Successfully installed boot image, knox is intact (it is still zero), but there is no root. After installing boot img i'm always getting error "Security Notice Unauthorized Actions Error" or something like that.
I'm using same firmware and baseband as mentioned in first post, i didn't tried your firmware because there is userdata partition inside of archive and i don't want to delete my data, at least before i root my phone and make good backup
Please help with root.
Edit: root works with adb after installing patched image
Thanks for your work.
zogu said:
@diart
Successfully installed boot image, knox is intact (it is still zero), but there is no root. After installing boot img i'm always getting error "Security Notice Unauthorized Actions Error" or something like that.
I'm using same firmware and baseband as mentioned in first post, i didn't tried your firmware because there is userdata partition inside of archive and i don't want to delete my data, at least before i root my phone and make good backup
Please help with root.
Edit: root works with adb after installing patched image
Thanks for your work.
Click to expand...
Click to collapse
How did you do ? i can not use adb
zogu said:
@diart
Successfully installed boot image, knox is intact (it is still zero), but there is no root. After installing boot img i'm always getting error "Security Notice Unauthorized Actions Error" or something like that.
I'm using same firmware and baseband as mentioned in first post, i didn't tried your firmware because there is userdata partition inside of archive and i don't want to delete my data, at least before i root my phone and make good backup
Please help with root.
Edit: root works with adb after installing patched image
Thanks for your work.
Click to expand...
Click to collapse
@zogu what do you mean using adb? Can you describe your step? Here what I try but still cannot root the phone.
1. Odin @diart firmware
2. Odin diar-uca_root.zip
3. Recovery mode & adb sideload supersu, both fail (verification blablabla issue)
I got same "unauthorized actions has been detected" notice like you, but fail to add root with chainfire supersu. Trying all one click root fail too. Can you help to describe your step?
noestradamus said:
@zogu what do you mean using adb? Can you describe your step? Here what I try but still cannot root the phone.
1. Odin @diart firmware
2. Odin diar-uca_root.zip
3. Recovery mode & adb sideload supersu, both fail (verification blablabla issue)
I got same "unauthorized actions has been detected" notice like you, but fail to add root with chainfire supersu. Trying all one click root fail too. Can you help to describe your step?
Click to expand...
Click to collapse
hi, well he want to say to use fourious gold chimera i use it and it workd but it workd with trying a lot with wondershare,kingroot some root that i found until you find the precise time to use it because the patch image is to let your device take some more libs and others via program you dont have a restriction and without patch you have restriction so in my case i use chimera and and it worked hmm i have bad english sory try it one more time if no contact with one that worked my method like zogu ask him he can help you out.
zogu said:
@diart
Successfully installed boot image, knox is intact (it is still zero), but there is no root. After installing boot img i'm always getting error "Security Notice Unauthorized Actions Error" or something like that.
I'm using same firmware and baseband as mentioned in first post, i didn't tried your firmware because there is userdata partition inside of archive and i don't want to delete my data, at least before i root my phone and make good backup
Please help with root.
Edit: root works with adb after installing patched image
Thanks for your work.
Click to expand...
Click to collapse
hello, i am glad that helped you can you tell the others how you do that which program they are having problems with that, thank you
caastab said:
No funciona yo lo prbe y mi telefono no encendio mas.
Click to expand...
Click to collapse
english and it work you just havr to work with it to work my friend
adh1907 said:
How did you do ? i can not use adb
Click to expand...
Click to collapse
ehy you cant use it ? he mean to root with program that are like kingo root
@diart can you make flashable g925f bootloader for g925a? I want to install twrp and then check all nice international roms (even lineage is coming to our devices), but with this at&t bootloader this can never be possible....
zogu said:
@diart can you make flashable g925f bootloader for g925a? I want to install twrp and then check all nice international roms (even lineage is coming to our devices), but with this at&t bootloader this can never be possible....
Click to expand...
Click to collapse
well i try out but i dont own that device anymore i work on mobilshop so when a device like that come here i try it i needet root so i made it and i post it but i will try i need someone to test them without device i work blind
diart said:
hi, well he want to say to use fourious gold chimera i use it and it workd but it workd with trying a lot with wondershare,kingroot some root that i found until you find the precise time to use it because the patch image is to let your device take some more libs and others via program you dont have a restriction and without patch you have restriction so in my case i use chimera and and it worked hmm i have bad english sory try it one more time if no contact with one that worked my method like zogu ask him he can help you out.
Click to expand...
Click to collapse
Ah, ic.
Still cannot root my phone even with other rooting tools (not try furious gold chimera yet, doesn't have it). But thanks for you @diart & @zogu anyway. you two give us hope that there's any possibility to root our AT&T S6 Edge phone.
Can someone tell me how to do it, please?
Boot image from first post is engineering boot image and it should works with all 6.0 firmwares.
I'm new to samsung, but i read that with this image is possible to remount system rw. Well on AT&T is impossible.
It is impossible to root phone with this image, but we can do a lot of useful things using adb, disable aps with pm disable, we have full access to data partition, making backups etc...
Actually i don't need root at all, i hate branding (specially if that includes some services, like at&t mail, phonebook...) on any device and i want to change firmware to some international.
All this is maybe possible with eng sboot. There is online available for 12 usd and this is not expensive, but i'm still not shure will i be able to change sboot to 925f.
Theoretically it should boot any kernel and recovery without even tripping knox, and maybe with this image is possible to install twrp, kernel, root and everything else. But also sometimes everything does not work (i read that with eng sboot fingerprint sensor does not work, it probably skip keys reading, without keys no fingerprint).
If someone is able to get sboot pj1 or pf1, please send me PM
P.S. One good thing with this eng boot is that my network selection menu has much more bands, even when i restored stock kernel. Don;t konow how, but it is there
diart said:
Hi guys, Tested and worked on
Model : G925A
Build number : MMB29K.G925AUCS5DPJ1
Baseband Version : G925AUCS5DPJ1
Android Version : 6.0.1
If you want my firmware you can find it here
Flash Via Odin.
If dont work for you than when i have time i will modify to work for you you send me build and baseband than we will see.
PS : I dont take any responsibility for anything.
If i help you just hit thanks nothing more.
Click to expand...
Click to collapse
my friend im flashing this file but odin md5 error binary is invalid ? how to fix ?
Just rename from md5 to tar. File name should be sm-g925a_uca_601.tar, flash it using odin (AP) and that's it.
zogu said:
Boot image from first post is engineering boot image and it should works with all 6.0 firmwares.
I'm new to samsung, but i read that with this image is possible to remount system rw. Well on AT&T is impossible.
It is impossible to root phone with this image, but we can do a lot of useful things using adb, disable aps with pm disable, we have full access to data partition, making backups etc...
Actually i don't need root at all, i hate branding (specially if that includes some services, like at&t mail, phonebook...) on any device and i want to change firmware to some international.
All this is maybe possible with eng sboot. There is online available for 12 usd and this is not expensive, but i'm still not shure will i be able to change sboot to 925f.
Theoretically it should boot any kernel and recovery without even tripping knox, and maybe with this image is possible to install twrp, kernel, root and everything else. But also sometimes everything does not work (i read that with eng sboot fingerprint sensor does not work, it probably skip keys reading, without keys no fingerprint).
If someone is able to get sboot pj1 or pf1, please send me PM
P.S. One good thing with this eng boot is that my network selection menu has much more bands, even when i restored stock kernel. Don;t konow how, but it is there
Click to expand...
Click to collapse
you need g925A pj1 or pf1 sboot ?
Engineering sboot pj1.
Thanks
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
Prashanth
Build number: G925AUCUBOI2, can i root any other build number stock firmware to get updated with marshmallow. because with build number last update was lollipop 5.1.1, please help me with once. i want my S6 Edge with Marshmallow. this S6 edge is using in India was taken from USA At&T unlocked.