Dear friend: I have a BQ Edison DC and upgrade it with with OmniRom4.4.4E2DC_MWv3. All work bell, but when I power of and conect the charger the sreen is always ON, alternating battery and OmniRom gif. I have tried with the MWv5, that solve this issue but in this version the sound don't work in my tablet. My tablet have Rockchip RK3066. Do you can help me ??
Related
Hi,
I have had my Xperia Z a while and a few months ago I bought a pioneer app radio for my car to use with ARLiberator app.
For those who dont know: This basically makes use of MHL to mirror screen of phone and then bluetooth to take touch inputs from the stereo's 7" touch screen and control as if you were using your android phone.
Everything is working great. However I have major battery drain issues even with apps like screen standby to turn phone screen off.
I installed Doom kernel which enables fast charge, the fast charging works with normal usb on my pc however when I try to activate fast charge with the MHL it just shows "Charging (USB)".
Anybody got any advice to get fast charge working with MHL?
thanks, Will
Hello I can't write in developer forum. Software (CM11 of 29.01) is good, it’s not freezing during video recording as in rom 4.1 (I use my phone as car camera). There’s only one annoying problem – when I plug in a car charger, the music player automatically turns on (option in menu: /device/earphone empty). The charger works fine with other phones (HTC and LG) and there were no problems before with rom 4.1, as well as with different chargers. Battery isn’t charging even after shutting down the player’s start script. The problem must be somehow connected to the plug-in... and KitKat. Charging worked when I restored 4.1.2 and while the phone was turned off. I tried another car charger and the problem didn’t occur (the one I have problem with is 1A type). I tried rom of 2.02, but still no change.
Some ideas (except changing the charger)?
Go to settings. More.....
Problem solved.
Sent from my GT-I8190 using xda app-developers app
Still not solved.
I had installed the tablet in my car for tuning and dash display -. The only complicated bit is how to turn it on if the battery goes flat.
someone on these forums has already done it with an android device but that metods dont work with this tablet
Power on button isnt accesible, therefore I need to modify the system files to power on when a charger is plugged in.
The idea is that tablet automatically turn on as soon as it's plugged in to charge.
Any ideas?
Thanks in advance.
Is this possible with the recent LP unlocked bootloader ?
Enviado desde mi iPad utilizando Tapatalk
Hi everyone,
Whenever I charge my tablet while in android, tablet wakes up each few seconds with screen on. While the screen is on, I can see that the charging icon displays the tablet is charging and then next time screen wakes up, I can see that it no longer charges. This loop continues until I disconnect the charger. It charges and wakes the screen then stops charging and wakes the screen. Again and again.
I just want someone to confirm that they have the same problem as mine so I know this is normal.
I tried to use another charger and it didn't help.
I am on mirek190 and I have had this problem both with version 5 and 6. I didn't test this with other versions and I can't remember if I had this problem with official firmware.
This doesn't happen with Windows.
Thank you.
Nik
I would like to add that if I boot to Windows I don't have the charging cycle problem. Windows displays constantly that the battery is charging. It's just the android which cycles through charging and of course irritating screen wakeup.
Thanks
Nik
Same problem on Teclast X98 Air III
Nik, Did you get any resolution on this? I just got my X98 Air III and it's having the same problem running the stock Android ROM. Thanks, Dave
Yes kind of. I flashed the stock Rom again using mft tool instead of the tool provided by mirek Rom. Then charged it overnight (about 8 hours) and then flashed mirek again using mft tool. It helped a lot
After 4 weeks a have now the same problem. Have the C5J6 with Mireks V6 and a clean install of Windows 10 1511. And now it doenst charge to 100%, sometimes it doenst charge. When it switch it of and put in the charger, it normal charge with about 1300mAh, but only so long as the green charge animation is visible. After the animation goes of, it goes down to 0mAh, so it doenst charge. I must plug in the charger in and out and then came a white battery symbol for charge (instead of green before) then it charge but very slow, 300mAh
Under Android runing sometimes it charge but not more then 80% and very slow, ca. 400mAh and stop charging at 80%..
Aida64 says under accu "over volting" or "dead".
Is the accu really dead??
This is lolipop bug, i also noticed that a few days ago. Im on official stock debloated. Charging in windows seems fine
Im waiting for new mirek's 4.4x release, lolipop is too sluggish and bugged on this tablet
I have a 6 Gb / 128 Gb Black Shark 2 Global Model: SKW-HO gave me problems with the charging center after a power drop, when I connected the original charger the charging port and the usb cable was heating up, try to fix the problem by buying and installing a new Charging Flex. Here started the worst when I made the change the cell phone turned on but the starter was very slow something abnormal then the system gave me a message of humidity in the charging connector, from that moment my cell phone went off and now no longer turns on or with the Flex original loading.
Pradeep rachaneni said:
I have a 6 Gb / 128 Gb Black Shark 2 Global Model: SKW-HO gave me problems with the charging center after a power drop, when I connected the original charger the charging port and the usb cable was heating up, try to fix the problem by buying and installing a new Charging Flex. Here started the worst when I made the change the cell phone turned on but the starter was very slow something abnormal then the system gave me a message of humidity in the charging connector, from that moment my cell phone went off and now no longer turns on or with the Flex original loading.
Click to expand...
Click to collapse
Welcome to the forums!
You might have a read here
Xiaomi Black Shark 2
The Xiaomi Black Shark 2 is a 6.39" phone with a 1080x2340p display. The Snapdragon 855 chipset is paired with 6/8/12GB of RAM and 128/256GB of storage. The main camera is 12+48MP and the selfie camera is 20MP. The battery has a 4000mAh capacity.
forum.xda-developers.com
Enjoy your stay