Plz Help my z1 dont open - Xperia Z1 Q&A, Help & Troubleshooting

Hi everyone from TURKIYE,
I have xperia z1 (6903) . it have lollipop EURO-LTE_14.6.A.1.236. i rooted it with kingroot and than unlock bootloader with Flashtool. There was everything OK. :good: But for install Recovery and flash custom rom , i instaled SuperSu Now my z1 dont open , keeps restart again and again. i cant open fastboot mode with volume down(-) and power button, it didn't work. i tried open with Xperia Companion but it warning me for unlock bootloader.
Plz help me i have to open my z1 because i haven't got other phone.
Sorry my bad english,
Thnx for replies

Turn the Device off by holding power and Volume Up button. then choose with flashtool ftf file and connect the device in Flashmode. after that you can start at the beginning.

Styler911 said:
Turn the Device off by holding power and Volume Up button. then choose with flashtool ftf file and connect the device in Flashmode. after that you can start at the beginning.
Click to expand...
Click to collapse
i reLock bootlader my phone with flashtool. Recovery with Xperia Companion. it opened, intstalled king root and super su. and unlock bootlader. Everything is OK now. But i tried eveything for install recovery. i have a warning in commender like this 'adb' is not recognized as an internal or external command,
operable program or batch file.
thnx 4answer:good:

uqrtml said:
But i tried eveything for install recovery. i have a warning in commender like this 'adb' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse
Did u try to install a stock based or aosp kernel? because, if you wanted to use an aosp based one, then you will be stuck in a bootloop.

Styler911 said:
Did u try to install a stock based or aosp kernel? because, if you wanted to use an aosp based one, then you will be stuck in a bootloop.
Click to expand...
Click to collapse
i have root and unlock bootlader my 6903. i want to install recovery and flash android noughot i intall adb and fastboot driver on my PC now. When i was install recovery , i have take this warning.
thnx for reply :fingers-crossed::good:
Please choose install action.
[1,2,3,4,5,6]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting device and ROM info
=============================================
Device model is C6903
Firmware is 14.6.A.1.236
Android version is 5.1.1
=============================================
Step2 : Sending the recovery files.
=============================================
cannot stat '..\tmp\dr.prop': No such file or directory
cannot stat '..\system\bin\chargemon': No such file or directory
cannot stat '..\system\bin\mr': No such file or directory
cannot stat '..\system\.XZDualRecovery\xbin\dualrecovery.sh': No such file or directory
cannot stat '..\tmp\NDRUtils.apk': No such file or directory
cannot stat '..\system\.XZDualRecovery\xbin\rickiller.sh': No such file or directory
cannot stat '..\tmp\byeselinux.ko': No such file or directory
cannot stat 'byeselinux\byeselinux.sh': No such file or directory
cannot stat '..\tmp\wp_mod.ko': No such file or directory
cannot stat 'byeselinux\sysrw.sh': No such file or directory
cannot stat '..\tmp\modulecrcpatch': No such file or directory
cannot stat '..\system\.XZDualRecovery\xbin\busybox': No such file or directory
cannot stat '..\system\.XZDualRecovery\xbin\recovery.twrp.cpio.lzma': No such file or directory
cannot stat '..\system\.XZDualRecovery\xbin\recovery.philz.cpio.lzma': No such file or directory
cannot stat '..\tmp\installrecovery.sh': No such file or directory
=============================================
Step3 : Setup of dual recovery.
=============================================
Unable to open /data/local/tmp/recovery/install.sh: No such file or directory
Unable to open /data/local/tmp/recovery/busybox: No such file or directory
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
sh: /data/local/tmp/recovery/busybox: not found
Press any key to continue . . .
sh: /data/local/tmp/recovery/install.sh: not found
=============================================
Installation FAILED!
Please copy and paste the contents of this
window to the DevDB thread for troubleshooting!
=============================================
Press any key to continue . . .

i have install Recovery with root rash . All of OK.

Related

[Q] Can't install any custom recovery Vodafone Nexus One

Hello,
i'm following this forum a long time, now. But at the moment I have a problem rooting my Vodafone Nexus One I can't solve.
It has 2.2.1 (FRG83D) on it. I unlocked the bootloader using fastboot. Now it shows the open lock when booting.
When I try to install a custom recovery using adb or terminal emulator, all looks good. But when i restart and go into recovery menu, always that damn standard menu appears (after putting power on & volume up).
Now I read, that I have to delete the install-recovery.sh in systems/etc and another file, I don't remember right now. I always get an error, when I try to delete or rename them. I tried it using adb, terminal and root explorer.
Does anyone have a clue how I can get rid of them?
Thanks!
Marco
Use fastboot, since you've already gone to the trouble of unlocking your bootloader...
fastboot flash recovery name-of-recovery.img
fastboot boot name-of-recovery.img
You have to remount the system partition as writable.
You only have to delete the install-recovery.sh file. The other one can be left alone.
hey guys, thanks...
i just did it using the following program and steps:
* - Download Superboot and extract it to a directory on your computer
* - Put your device into bootloader mode. You can either use ADB or turn the phone on whilst holding the trackball to enter the bootloader.
* - If on Windows double click ‘install-superboot-windows.bat’
* - If on a Mac, cd into the directory containing the files and type ‘chmod +x install-superboot-mac.sh && ./install-superboot-mac.sh’
* - If on Linux, cd into the directory containing the files and type ‘chmod +x install-superboot-linux.sh && ./install-superboot-linux.sh’
after that i had to remount it as R/W partition.

[Q] XZRecovery not installing Recovery !!! Plz Help

Greetings Developers,
My issue is First i was on JB 4.3 then i upgraded to KitKat 4.4.2 Build Number 10.5.A.0.230 via OTA
Then i rooted my Xperia Z (C6602) using Towelroot.
Rootchecker says i have root access on my phone futher i installed SuperSu and Busybox from play store.
then i installed XZRecovery 1.0
Now the issue starts here..
when i am trying to install recovery it gives me error mentioned below.
Extracting Recovery files
Remounting system (RW)
Remount system failed!
Can anyone please tell me what i am doing wrong?
Thanks & Regards,
mishraomi said:
Greetings Developers,
My issue is First i was on JB 4.3 then i upgraded to KitKat 4.4.2 Build Number 10.5.A.0.230 via OTA
Then i rooted my Xperia Z (C6602) using Towelroot.
Rootchecker says i have root access on my phone futher i installed SuperSu and Busybox from play store.
then i installed XZRecovery 1.0
Now the issue starts here..
when i am trying to install recovery it gives me error mentioned below.
Extracting Recovery files
Remounting system (RW)
Remount system failed!
Can anyone please tell me what i am doing wrong?
Thanks & Regards,
Click to expand...
Click to collapse
You used the apk huh?
YOU NEED PC FOR that
Click on the .bat file and select SUPERsu
Xperia™ Z (C6602) with Tapatalk
androidfreak70 said:
You used the apk huh?
YOU NEED PC FOR that
Click on the .bat file and select SUPERsu
Xperia™ Z (C6602) with Tapatalk
Click to expand...
Click to collapse
Yes i download the apk of XZRecovery.
I was successful in installing the XZRecovery App in my phone, but under the App there is one option saying "install Recover", i am failing there.
I will look at the method provided by Nut in ur Link
Thanks
mishraomi said:
Yes i download the apk of XZRecovery.
I was successful in installing the XZRecovery App in my phone, but under the App there is one option saying "install Recover", i am failing there.
I will look at the method provided by Nut in ur Link
Thanks
Click to expand...
Click to collapse
Yes you get the error because that app is no loger support higher android versions...
Good luck
Xperia™ Z (C6602) with Tapatalk
androidfreak70 said:
You used the apk huh?
YOU NEED PC FOR that
Click on the .bat file and select SUPERsu
Xperia™ Z (C6602) with Tapatalk
Click to expand...
Click to collapse
androidfreak70 said:
Yes you get the error because that app is no loger support higher android versions...
Good luck
Xperia™ Z (C6602) with Tapatalk
Click to expand...
Click to collapse
Thanks for the info...
Now i will try the method u provided in ur link
Thanks Appreciated
mishraomi said:
Thanks for the info...
Now i will try the method u provided in ur link
Thanks Appreciated
Click to expand...
Click to collapse
You're welcome
Xperia™ Z (C6602) with Tapatalk
androidfreak70 said:
You used the apk huh?
YOU NEED PC FOR that
Click on the .bat file and select SUPERsu
Xperia™ Z (C6602) with Tapatalk
Click to expand...
Click to collapse
Well i tried the method you gave in the link and i am getting this please take a look
The system cannot find the path specified.
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices =
= =
==============================================
[ 1. Installation on ROM rooted with SuperSU ]
[ 2. Installation on ROM rooted with SuperUser ]
[ 3. Installation on unrooted ROM using the TowelRoot method ]
[ 4. Install ADB drivers to windows ]
[ 5. Exit ]
Please choose install action. [1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found
=============================================
Getting ro.build.product
=============================================
Device model is C6602
Firmware is 10.5.A.0.230
=============================================
Step2 : Sending the recovery files.
=============================================
cannot stat 'dr.prop': No such file or directory
cannot stat 'chargemon.sh': No such file or directory
cannot stat 'mr.sh': No such file or directory
cannot stat 'dualrecovery.sh': No such file or directory
cannot stat 'NDRUtils.apk': No such file or directory
cannot stat 'rickiller.sh': No such file or directory
cannot stat 'disableric': No such file or directory
cannot stat 'busybox': No such file or directory
cannot stat 'recovery.twrp.cpio.lzma': No such file or directory
cannot stat 'recovery.philz.cpio.lzma': No such file or directory
cannot stat 'recovery.cwm.cpio.lzma': No such file or directory
cannot stat 'installrecovery.sh': No such file or directory
=============================================
Step3 : Setup of dual recovery.
=============================================
Unable to open /data/local/tmp/recovery/install.sh: No such file or directory
Unable to open /data/local/tmp/recovery/busybox: No such file or directory
Look at your device and grant supersu access
Press any key to continue AFTER granting root access.
tmp-mksh: /data/local/tmp/recovery/busybox: not found
Press any key to continue . . .
tmp-mksh: /data/local/tmp/recovery/install.sh: not found
=============================================
Installation finished. Enjoy the recoveries
=============================================
I have set all the paths, adb and all that.
I don't know what i am doing wrong.
mishraomi said:
Well i tried the method you gave in the link and i am getting this please take a look
The system cannot find the path specified.
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices =
= =
==============================================
[ 1. Installation on ROM rooted with SuperSU ]
[ 2. Installation on ROM rooted with SuperUser ]
[ 3. Installation on unrooted ROM using the TowelRoot method ]
[ 4. Install ADB drivers to windows ]
[ 5. Exit ]
Please choose install action. [1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found
=============================================
Getting ro.build.product
=============================================
Device model is C6602
Firmware is 10.5.A.0.230
=============================================
Step2 : Sending the recovery files.
=============================================
cannot stat 'dr.prop': No such file or directory
cannot stat 'chargemon.sh': No such file or directory
cannot stat 'mr.sh': No such file or directory
cannot stat 'dualrecovery.sh': No such file or directory
cannot stat 'NDRUtils.apk': No such file or directory
cannot stat 'rickiller.sh': No such file or directory
cannot stat 'disableric': No such file or directory
cannot stat 'busybox': No such file or directory
cannot stat 'recovery.twrp.cpio.lzma': No such file or directory
cannot stat 'recovery.philz.cpio.lzma': No such file or directory
cannot stat 'recovery.cwm.cpio.lzma': No such file or directory
cannot stat 'installrecovery.sh': No such file or directory
=============================================
Step3 : Setup of dual recovery.
=============================================
Unable to open /data/local/tmp/recovery/install.sh: No such file or directory
Unable to open /data/local/tmp/recovery/busybox: No such file or directory
Look at your device and grant supersu access
Press any key to continue AFTER granting root access.
tmp-mksh: /data/local/tmp/recovery/busybox: not found
Press any key to continue . . .
tmp-mksh: /data/local/tmp/recovery/install.sh: not found
=============================================
Installation finished. Enjoy the recoveries
=============================================
I have set all the paths, adb and all that.
I don't know what i am doing wrong.
Click to expand...
Click to collapse
All those files that the installer says "cannot find"
Can you find them in the zip?
Xperia™ Z (C6602) with Tapatalk
androidfreak70 said:
You used the apk huh?
YOU NEED PC FOR that
Click on the .bat file and select SUPERsu
Xperia™ Z (C6602) with Tapatalk
Click to expand...
Click to collapse
androidfreak70 said:
All those files that the installer says "cannot find"
Can you find them in the zip?
Xperia™ Z (C6602) with Tapatalk
Click to expand...
Click to collapse
yes i can find all the files in the folder
below is the screenshot of the folder
mishraomi said:
yes i can find all the files in the folder
below is the screenshot of the folder
Click to expand...
Click to collapse
Hmm thats strange....
Maybe you will need to reflash the rom to fix...
Xperia™ Z (C6602) with Tapatalk
Is it possible that going in wrong direction or doing something somewhere wrong while installing Recovery will brick my phone ?
androidfreak70 said:
Hmm thats strange....
Maybe you will need to reflash the rom to fix...
Xperia™ Z (C6602) with Tapatalk
Click to expand...
Click to collapse
one thing..
i have already rooted my phone using towelroot and have installed Supersu
everything till now works fine, its just that i am not able to install recovery, coz i want to try different mods like Cyanogen etc
Please suggest me a safe method to install the ROM again
Thanks
mishraomi said:
one thing..
i have already rooted my phone using towelroot and have installed Supersu
everything till now works fine, its just that i am not able to install recovery, coz i want to try different mods like Cyanogen etc
Please suggest me a safe method to install the ROM again
Thanks
Click to expand...
Click to collapse
Tool : http://www.flashtool.net/download.php
FTF file http://forum.xda-developers.com/xperia-z/general/ftf-10-5-0-230-c6602-c6603-journalist-t2759636 select anyone of them
Backup your data
Install flashtool and after that go to the place you installed and then to drivers folder and ru the installer and select xperia z and fastboot and flashmod drivers and while the install you will get another window just select install anyway
Move the downloaded FTF file to frimwares folder in install place of the tool
Run flashtool
Click the lighning icon
Select flashmode and ok
Select the file in the list
Wait little time and when you see window says waiting for flashmode:
Turn the phone off
Hold vol- button
Connect the phone and when the window go away release the button
Wait few minuteS
After finish unplug the phone and turn it on
Turn usb debugging on
Install the recovery using the installer again
now its fine
But i really really dont recommend to install completly custom rom because some people reported a HARD bricked phones because of that
Enjoy
Xperia™ Z (C6602) with Tapatalk
androidfreak70 said:
Tool : http://www.flashtool.net/download.php
FTF file http://forum.xda-developers.com/xperia-z/general/ftf-10-5-0-230-c6602-c6603-journalist-t2759636 select anyone of them
Backup your data
Install flashtool and after that go to the place you installed and then to drivers folder and ru the installer and select xperia z and fastboot and flashmod drivers and while the install you will get another window just select install anyway
Move the downloaded FTF file to frimwares folder in install place of the tool
Run flashtool
Click the lighning icon
Select flashmode and ok
Select the file in the list
Wait little time and when you see window says waiting for flashmode:
Turn the phone off
Hold vol- button
Connect the phone and when the window go away release the button
Wait few minuteS
After finish unplug the phone and turn it on
Turn usb debugging on
Install the recovery using the installer again
now its fine
But i really really dont recommend to install completly custom rom because some people reported a HARD bricked phones because of that
Enjoy
Xperia™ Z (C6602) with Tapatalk
Click to expand...
Click to collapse
Thank you so much i will try this method later today
Appreciated!!!
mishraomi said:
Thank you so much i will try this method later today
Appreciated!!!
Click to expand...
Click to collapse
Happy to help
Good luck with it
BACKUP YOU DATA BEFORE YOU TRY IT!!!:fingers-crossed:
Ok well it seems there was some issue with my phone.
So I thought of repairing it first with PC Companion coz i wanted to be on safe side.
I was successful in repairing my phone.
Everything is fine. but after repairing I lost the root access.
That repair fixed everything.
Now I have couple of doubts which I think should be clear before I proceed for installing custom recovery and gaining root access
1) if I just flash the recovery using flashtool will that be fine? And then flash the SuperSu same way via flash tool.
2) I read in an article, the author there unlocked the bootloader, then flashed the Cwm recovery and then flashed the Doomlord's Advance Kernel with Cwm recovery.
My question is why did the author flashed the kernel again. Can't we just flash the recovery that's it?
And I guess to flash the Doomlord's Advance Stock Kernel unlocking of boot loader ws done? Is it true?
Thanks
Success is never final, failure is never fatal, it's courage that counts.
mishraomi said:
Ok well it seems there was some issue with my phone.
So I thought of repairing it first with PC Companion coz i wanted to be on safe side.
I was successful in repairing my phone.
Everything is fine. but after repairing I lost the root access.
That repair fixed everything.
Now I have couple of doubts which I think should be clear before I proceed for installing custom recovery and gaining root access
1) if I just flash the recovery using flashtool will that be fine? And then flash the SuperSu same way via flash tool.
2) I read in an article, the author there unlocked the bootloader, then flashed the Cwm recovery and then flashed the Doomlord's Advance Kernel with Cwm recovery.
My question is why did the author flashed the kernel again. Can't we just flash the recovery that's it?
And I guess to flash the Doomlord's Advance Stock Kernel unlocking of boot loader ws done? Is it true?
Thanks
Success is never final, failure is never fatal, it's courage that counts.
Click to expand...
Click to collapse
1- you cant flash recovery or superSU with flashtool, its used only to flash stock roms FTF
2- you can unlock the bootloader and then flash the kernel
But you tried to install using the installed that i gave you after repair the phone?
Xperia™ Z (C6602) with Tapatalk
androidfreak70 said:
1- you cant flash recovery or superSU with flashtool, its used only to flash stock roms FTF
2- you can unlock the bootloader and then flash the kernel
But you tried to install using the installed that i gave you after repair the phone?
Xperia™ Z (C6602) with Tapatalk
Click to expand...
Click to collapse
I didn't do anything...i was going to try your method of flashing FTF stock rom.
so i just connected my phone to pc and then opened PC Companion to make backup of my important files.
Then PC Companion showed me that there is update available for system.
So i just updated my phone, it showed me updates available may be because, i have already removed all the bloatware so i guess to install them again that update was showing up
I went through that update process, and my phone rebooted and every single bloatware was restored back to my phone added i lost root access
at this point of time i think my phone completely free from any issues so its good to start again.
Now i have to start again from the begining.
this is the article i was talking about.
http://techbeasts.com/2014/05/26/in...-xperia-z-10-5-a-0-230-firmware-how-to-guide/
I am very scared of bricking up my phone coz this phone is my dream phone and i have bought it working real hard and saving hell lot of money for it
mishraomi said:
I didn't do anything...i was going to try your method of flashing FTF stock rom.
so i just connected my phone to pc and then opened PC Companion to make backup of my important files.
Then PC Companion showed me that there is update available for system.
So i just updated my phone, it showed me updates available may be because, i have already removed all the bloatware so i guess to install them again that update was showing up
I went through that update process, and my phone rebooted and every single bloatware was restored back to my phone added i lost root access
at this point of time i think my phone completely free from any issues so its good to start again.
Now i have to start again from the begining.
this is the article i was talking about.
http://techbeasts.com/2014/05/26/in...-xperia-z-10-5-a-0-230-firmware-how-to-guide/
I am very scared of bricking up my phone coz this phone is my dream phone and i have bought it working real hard and saving hell lot of money for it
Click to expand...
Click to collapse
I will help you myself coz you looks have doubt with it
You have teamviewer??
Xperia™ Z (C6602) with Tapatalk
androidfreak70 said:
I will help you myself coz you looks have doubt with it
You have teamviewer??
Xperia™ Z (C6602) with Tapatalk
Click to expand...
Click to collapse
Yes i have Teamviewer

[Q&A] [Z1][TWRP][PhilZ Touch][CWM] XZDualRecovery Q&A

Q&A for [Z1][TWRP][PhilZ Touch][CWM] XZDualRecovery Q&A
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Z1][TWRP][PhilZ Touch][CWM] XZDualRecovery Q&A. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
goldsmit409 said:
Hi i have a c6902 with unlocked bootloader i flashed stock kernel from here http://forum.xda-developers.com/showthread.php?p=57364878#post57364878 it says "3.4.0-perf-gaee6e5a [email protected] #1 Thu Oct 9 09:14:33 2014"
now i installed the recovery from this Z1-lockeddualrecovery2.7.154-BETA.installer.zip by running install.bat and chosing 1 option it says recovery installed and reboots . but it does not show, i tried with NDRutil as well but it does not bring the recovery
Can some one tell me what i am ding wrong?
thanks
Edit: maybe this can help, I am rooted
Code:
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6902
Firmware is 14.4.A.0.157
=============================================
Step2 : Sending the recovery files.
=============================================
9 KB/s (29 bytes in 0.003s)
5108 KB/s (15757 bytes in 0.003s)
246 KB/s (501 bytes in 0.001s)
2903 KB/s (11842 bytes in 0.003s)
5045 KB/s (56834 bytes in 0.011s)
1501 KB/s (3082 bytes in 0.002s)
187 KB/s (385 bytes in 0.002s)
6742 KB/s (657704 bytes in 0.095s)
6670 KB/s (2965179 bytes in 0.434s)
6230 KB/s (2598631 bytes in 0.407s)
5892 KB/s (1875928 bytes in 0.310s)
2118 KB/s (8759 bytes in 0.004s)
=============================================
Step3 : Setup of dual recovery.
=============================================
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
-rwxr-xr-x 1 shell shell 657704 Jul 31 13:39 /data/local/tmp/recover
y/busybox
Press any key to continue . . .
##########################################################
#
# Installing XZDR version 2.7.154 BETA
#
#####
Temporarily disabling the RIC service, remount rootfs and /system writable to al
low installation.
mount: permission denied (are you root?)
mount: permission denied (are you root?)
Copy recovery files to system.
cp: can't create '/system/bin/recovery.twrp.cpio.lzma': File exists
cp: can't create '/system/bin/recovery.cwm.cpio.lzma': File exists
cp: can't create '/system/bin/recovery.philz.cpio.lzma': File exists
chmod: /system/bin/recovery.twrp.cpio.lzma: Read-only file system
chmod: /system/bin/recovery.cwm.cpio.lzma: Read-only file system
chmod: /system/bin/recovery.philz.cpio.lzma: Read-only file system
Copy chargemon script to system.
cp: can't create '/system/bin/chargemon': File exists
chmod: /system/bin/chargemon: Read-only file system
Copy dualrecovery.sh to system.
cp: can't create '/system/bin/dualrecovery.sh': File exists
chmod: /system/bin/dualrecovery.sh: Read-only file system
Copy rickiller.sh to system.
cp: can't create '/system/bin/rickiller.sh': File exists
chmod: /system/bin/rickiller.sh: Read-only file system
Installing NDRUtils to system.
cp: can't create '/system/app/NDRUtils.apk': File exists
chmod: /system/app/NDRUtils.apk: Read-only file system
Copy disableric to system.
cp: can't create '/system/xbin/disableric': File exists
chmod: /system/xbin/disableric: Read-only file system
Copy busybox to system.
cp: can't create '/system/xbin/busybox': File exists
cp: can't create '/system/.XZDualRecovery/busybox': File exists
chmod: /system/xbin/busybox: Read-only file system
Trying to find and update the gpio-keys event node.
Found and will be using /dev/input/event4!
Trying to find and update the power key event node.
Found and will be monitoring /dev/input/event3!
Speeding up backups.
Make sure firstboot goes to recovery.
=============================================
DEVICE WILL NOW TRY A DATA SAFE REBOOT!
=============================================
WARNING: linker: app_process has text relocations. This is wasting memory and is
a security risk. Please fix.
WARNING: linker: app_process has text relocations. This is wasting memory and is
a security risk. Please fix.
=============================================
Your installation has already cleaned up after
itself if you see the install.bat/install.sh exit.
=============================================
=============================================
Installation finished. Enjoy the recoveries!
=============================================
Press any key to continue . . .
Nevermind got it to work
Thanks
Click to expand...
Click to collapse
Can you please post how you did it?
I got same problem(It's my second day with Xperia so i don't know much about what locks Sony installed there).
choose the option 3,after this you smartphone reboot into recovery mode, later download the last version of super su or superuser in zip format. flashing through recovery mode and, that's all, rooted and recovery installed.
juliheavy said:
choose the option 3,after this you smartphone reboot into recovery mode, later download the last version of super su or superuser in zip format. flashing through recovery mode and, that's all, rooted and recovery installed.
Click to expand...
Click to collapse
Thanks for tip.
I found what was wrong there - new kernel(C690X_14.4.A.0.157) was locking it.
After downgrading to C690X_14.4.A.0.108 it all worked.
Death_Master said:
Can you please post how you did it?
I got same problem(It's my second day with Xperia so i don't know much about what locks Sony installed there).
Click to expand...
Click to collapse
Death_Master said:
Thanks for tip.
I found what was wrong there - new kernel(C690X_14.4.A.0.157) was locking it.
After downgrading to C690X_14.4.A.0.108 it all worked.
Click to expand...
Click to collapse
ah obviously! ? well thinking
how to make CWM the default recovery specially when pressing the vol + when booting, i made a backup in internal sd using cwm but cannot be restored by philtouch, recovery is not yet stable
i have a recovery problem
when i root the phone.. intall recovery.. ( also follow the steps) and in recovery i cant make nothing with system, when i intall rom its freezee and i see only the sony logo so help me pls, once work that but i dont know why what do i wrong ?
when tried to install the recovery on my unrooted phone its stock on libvdm opened <loljavasucks> what can i do ??
Confirm working on C6902 Stock Kernel 14.4.A.0.157 (locked bootloader)
:good: You're awesome! Good job!
. . . it was stuck at Speeding up backups. , then I decided to disconnect and restart my phone, and finally I could get into the Recovery. No problem at all. Now I'm on a custom ROM.
/system/xbin/su /system/bin/sh not found
I am trying to install Z1-lockeddualrecovery2.8.2-RELEASE.installer, but it says /system/xbin/su /system/bin/sh not found.
I use superSu and I cant grant the program superSu access, it doesn't pop up on my phone.
ihacker rom known issue
hi there, im having issue on ihacker rom i dnt no what to do how to fix "unable to read xzdr.prop it was known issue on his rom..what i shall do.red light is signaling when im going to boot to recovery.how to fix my recovery
C6903 .157 Z1
Advanced Stock Kernel
Hello there gurus.
Being on a stock fully rooted kernel (14.4.A.0.157) flashed with FlashTool (unlocked bootloader), and thus with stock recovery (ie no custom recovery installed). I went to NUT''s most excellent site and made a “XZDualRecovery 2.8.2 Advanced Stock Kernel” by uploading the kernel.sin file which I got from the FTF file created with FlashTool. This creates a flashable.zip file meant to be installed from inside a custom recovery solution.
My question is then, if I extract the boot.img file from this flashable.zip, could I then flash this image using fastboot ( fastboot flash boot boot.img ) ?
Could I then use that solution to install a CM12 nightly build, which I assume would promptly overwrite what I just did instead of reflashing a CM12 boot.img and go from there?
Would I gain anything at all from doing this instead of just using the Z1-lockeddualrecovery2.8.2-RELEASE.installer.zip package?
I'm so confused now.
Can somebody help me ?
I start the install.bat and press 1 ( i have SuperSU ) and it says " Waiting for Device , connect USB cable now " but when i connect my phone ( C6903 ) i does nothing. I tried rebooting in flash mode and in fastboot mode but my pc does nothing. How am i supposed to flash the Kernel if it isn't working ? How do i make it work ?
Install.bat does nothing for a long time
Sony Xpeira Z1 C6903
BuildNr. 14.1.G.1.534
SU: SuperSU
rooted
So i downloaded flashable.zip and installable.zip and started install.bat and it says waiting for device please connect.
So i connect my phone and it does nothing.
I tried rebooting my phone in fastboot mode and also in flash mode.
It did nothing.
What am i supposed to do ?
Please help me ... i don't want to stay with Android 4.2
Problem with links
I try to download a file, but the page sent me to http://nut.xperia-files.com/filenotfound.php
link die ?
Is there a method for lollipop yet? I flashed a prerooted rom but didn't flash the recovery and just rebooted. I tried thw 2.8.9 installer but nothing happened on my phone (choosing method number 1)
Edit: Nevermind, I forgot that I reinstalled this laptop so ADB Drivers were missing. It still stops stops while transfering the files. It stops after the 6th file transfer.
ok i got a probably stupid question . .
i have z1 and its rooted with no reco0very installed..
if i install recovery and make a full backup and do a factory reset of the phone and install lolipop official , will the backup work if i go back and do restore of kk backup?
Installing the kernel in Lollipop
I had 4.4.4 rooted whitout any recovery, but then I installed lollipop via ota in my z1 c6902 locked bootloader. Can I install the dualrecovery in my phone without any problem?.
Im on 2.8.10 how to install xposed framework?
Do I need to edit/modify xzdr prop file? Or can I direct install?
Z1 5.0.2.
242 fw.

Micromax canvas A1 bricked, pls help!!!

hi,
my micromax a1 was runnning marshmallow 6.0.1 when during a security patch update installation got stuck and failed to boot again. now just booting into "dead android with exclamation mark". upon pressing power button and volume up and going into recovery(Android stock recovery) menu , cant wipe partition or data as it throws error "E: failed to mount/ cache" errors..
upon trying to install with any SD card also throws same error.
then i tried to install through ADB, while connecting to PC , PC not detecting mobile in recovery mode but detecting in bootloader mode. with fastboot flash command (for installing TWRP/CWM) in bootloader mode, error coming as "sending recovery failed(unknown status code)" .
Kindly help...
same happened to me yesterday . do you find any solution ??
Hi there !
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMMEDIATELY.
NOW REFER HERE TO ROOT MARSHMALLOW
HIT THANKS IF HELPED
if link do not work here properly then just google 'canvas a1 stuck on startup' ... and follow link in associated with xda
Device is dead
My phone is neither switching on, nor charging.
I flashed the stock ROM due to some problem with the rooted device through SP Flash tools. It completed successfully, but the device is not switching on or charging.
KIndly help

Android 6.0.1 rooting problem

I tried to root my device but I could not. I followed many things but nothing worked. So I tried to install prerooted firmware. Android 6.0.1 - 23.5.A.1.291 version
I got this error message.
[/COLOR]Step3 : Setup of dual recovery.
=============================================
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
/system/bin/sh: /system/xbin/su: not found
Press any key to continue . . .
/system/bin/sh: su: not found
I don't get any message on my device about granting root access.
I have xperia z3 compact D5803, Android 6.0.1 - 23.5.A.1.291 UNROOTED version. I want to root my phone and I followed the steps but as you see above there is an error message. I can't continue other steps because of this interruption.
Can you help me for rooting my device?
http://forum.xda-developers.com/z3-compact/general/how-to-root-backup-drm-keys-t3013343
33- Copy resulting "pre-rooted" fw to /sdcard0 on your phone (it means copy flashable.zip from the PRFC directory to the "internal storage" directory of the phone)
34- Get Dual Recovery installer this time, from http://nut.xperia-files.com/ you want Z3C-lockeddualrecoveryX.Y.Z-RELEASE.installer.zip notice how thats 'installer' this time, not the same file as in 30!
35- Unzip it
36- start install.bat and follow instructions (hit 1 (allow adb/root on the phone as needed)
I could not pass beyond step 36.
Main reason for trying to root my device is when I got the latest update 6.0.1, my phone's volume gone low. Call ringtone volume and video volumes, message tone volumes are very low. I searched it why and found that I have to wipe cache. But I can't because my device is not rooted. That's why I am trying to find a solution.
Can you help?
Try rooting as written in that guide by restoring to KitKat
this method is old try this one ....
http://forum.xda-developers.com/z3-compact/general/recovery-root-mm-575-lb-t3418714
carminedev said:
this method is old try this one ....
http://forum.xda-developers.com/z3-compact/general/recovery-root-mm-575-lb-t3418714
Click to expand...
Click to collapse
russel5 said:
How-to:
* you need stock MM .575 or .291 firmware
* if you have .291 firmware, you need flash stock kernel.sin (575) via FlashTool and turn on your phone. After, when script done and you reboot in custom recovery, flash SuperSU, then turn off your phone and flash back kernel.sin (291)
Click to expand...
Click to collapse
How can I flash my device correctly?
Are there any guide for this topic? Can you help?
do you know how to use flashtool ?
---------- Post added at 18:02 ---------- Previous post was at 17:38 ----------
if you are on .291 firmware.....
1) download kernel291.zip
2) download kernel575.zip , flash via FlashTool SOFTWARE and turn on your phone.
3) download latest SuperSU.zip and upload it into Z3 Compact sdcard
4) enable USB-debugging on your phone , plug phone to computer and look on Z3 Compact display , flag that voice....
5) download recovery_for_mm575.zip and extract to your computer.
6) Install script . Once done reboot in custom recovery.
7) Once in Recovery , Install SuperSU and TurnOFF your phone from Recovery.
8) Install kernel291.zip via FlashTool SOFTWARE and turn on your phone.
enjoy your rooted device.
carminedev said:
do you know how to use flashtool ?
---------- Post added at 18:02 ---------- Previous post was at 17:38 ----------
if you are on .291 firmware.....
1) download kernel291.zip
2) download kernel575.zip , flash via FlashTool SOFTWARE and turn on your phone.
3) download latest SuperSU.zip and upload it into Z3 Compact sdcard
4) enable USB-debugging on your phone , plug phone to computer and look on Z3 Compact display , flag that voice....
5) download recovery_for_mm575.zip and extract to your computer.
6) Install script . Once done reboot in custom recovery.
7) Once in Recovery , Install SuperSU and TurnOFF your phone from Recovery.
8) Install kernel291.zip via FlashTool SOFTWARE and turn on your phone.
enjoy your rooted device.
Click to expand...
Click to collapse
Flashmode does not work. Flashtool can't find the kernels. I opened and extracted the zip files(kernel) but nothing changed. Can I use the fastboot method?
(I tried firmware and kernels both zipped and unzipped in the folder but flashtool couldn't see the files)
http://forum.xda-developers.com/z3-compact/development/list-pre-rooted-firmwares-6-oct-2015-t3218820
Above the link there is prerooted firmwares. I want to flash 6.0.1 firmware by using flashtool but when I choose flashmode, flashtool could not see the firmware. It is in zip format. I opened and extracted the fw but nothing changed. I changed the extension to .ftf but no change occured.
How can I install firmware by using the link above?
Can you help?
http://www.androidpolice.com/2014/10/02/unlocking-the-bootloader-on-sonys-xperia-z3-and-z3-compact-causes-poor-low-light-camera-performance-thanks-to-drm/

Categories

Resources