Related
hi all sorry for my bad english i'm italian
i had flash the PAC build 3 rom two days ago but i didn't like it because it restart every 5 min
The problem come when i try to connect to my pc and use odin because my pc won't recognise my phone!!!
i know there are a lot of thread like this but i never seen a person who need help to solve this problem!
-i uninstalled all of my driver and reinstall it again
-i uninstalled kies
-i try to flash a nandroid backup that i flash before but it stop when it need to restore /system
-i try to install twrp and format data,cache , system nut nothing change
-i format my win7 (yep i did it) but it says always uknown device
-my usb cable working well with oder device
The problem now is that i can only access to Download Mode but i can't connect to my pc!
i can't access recovery because i flash a lot of type of recovery (every cocafe twrp and cwm) and when i flash the 4.1 twrp the phone did''t boot in recovery.
I think it is too strange that when i was able to enter in recovery i can't do a /system format (the oder format done well).
I think that maybe my system corrupt after flash.
Thanks a lot guys i hope you can read my noob english haha
Try download a firmware at sammobile and go to download mode connect your phone with the computer and use google to find out how to flash firmware using odin and reboot then :victory:
Last thing do not flash any unstable rom
sorry for my bad english.
xxdavidchoyxx said:
Try download a firmware at sammobile and go to download mode connect your phone with the computer and use google to find out how to flash firmware using odin and reboot then :victory:
Last thing do not flash any unstable rom
sorry for my bad english.
Click to expand...
Click to collapse
and how?! my pc don't recognise my cell and in odin the COM window is empty
Did you try it on other PC/laptop? Or other cable?
Eliminate these possibilities and then see those done.
R_a_z_v_a_n said:
Did you try it on other PC/laptop?
Click to expand...
Click to collapse
Thanks Razvan
i try it but it always says tha is a uknown device
i think that odin mode i corrupt like my system
any other advice
That's weird.
Try a clean install Kies and Odin software (version 1.85).
But before that, clean the remains of the old existing software from your computer.
R_a_z_v_a_n said:
That's weird.
Try a clean install Kies and Odin software (version 1.85).
But before that, clean the remains of the old existing software from your computer.
Click to expand...
Click to collapse
Ok i'm now unistalling kies and drivers but as i say a format my win7 and nothing change...
AndyMcMars said:
Ok i'm now unistalling kies and drivers but as i say a format my win7 and nothing change...
Click to expand...
Click to collapse
Nothing change....always uknown device...
AndyMcMars said:
Nothing change....always uknown device...
Click to expand...
Click to collapse
How did you install kernels? From recovery or you used dd command in adb shell?
shut_down said:
How did you install kernels? From recovery or you used dd command in adb shell?
Click to expand...
Click to collapse
recovery
i notice that when i install my phone driver a pop up come on and says " mass storage controller -------------- Windows update no driver found"
OK thanks to all i resolve by deassembling and reassembling another micro usb from my cell
ths guys
AndyMcMars said:
and how?! my pc don't recognise my cell and in odin the COM window is empty
Click to expand...
Click to collapse
install usb drivers by installing kies in pc or laptop and then it will detect in odin
hi, I my phone is in a bootloop after I installed android revelution HD
there are a lot of forums about this problem but not many about the htc one.
There is only one difference my pc won´t reconize my htc so I can´t erase the cache.
please help what should I do.
Can you enter fastboot or recovery?
LarsRosenberg said:
hi, I my phone is in a bootloop after I installed android revelution HD
there are a lot of forums about this problem but not many about the htc one.
There is only one difference my pc won´t reconize my htc so I can´t erase the cache.
please help what should I do.
Click to expand...
Click to collapse
try to change your PC or use another system, then re-install RUU after erase cache
if not, go to Recovery mode, Erase and Wipe, re-install Ruu
hope this help you
Sindroid said:
Can you enter fastboot or recovery?
Click to expand...
Click to collapse
I can enger fastboot but my pc says there is an error 43.
I can't go to recovery because when I go there hè shows the screen of the recovery And than he just reboot itself.
moha_moha20106 said:
try to change your PC or use another system, then re-install RUU after erase cache
if not, go to Recovery mode, Erase and Wipe, re-install Ruu
hope this help you
Click to expand...
Click to collapse
I have tried on 3 different computers they all don't reconize it.
I also tried to manually put a recovery on my phone but I just can't get the computers to reconize it.
LarsRosenberg said:
I have tried on 3 different computers they all don't reconize it.
I also tried to manually put a recovery on my phone but I just can't get the computers to reconize it.
Click to expand...
Click to collapse
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
http://answers.microsoft.com/en-us/...cognised/6a2a5531-8b80-4798-9aa6-ee2dcb705c7f
http://pcsupport.about.com/od/errorc/a/code-43-error.htm
moha_moha20106 said:
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
I just did all this and it still won't reconize it. It is weird because when I connect the phone to my pc it gives a sound and when I disconnect the phone my computer will also give a sound. So the computer sees the phone he just won't reconize it
Click to expand...
Click to collapse
USB driver is still your key.
LarsRosenberg said:
moha_moha20106 said:
read these tips first about your USB errors, then find the correct HTC driver, maybe your driver is corrupted
you can re-install HTCSync or search for updates
be sure your PC had latest Drivers too
I just did all this and it still won't reconize it. It is weird because when I connect the phone to my pc it gives a sound and when I disconnect the phone my computer will also give a sound. So the computer sees the phone he just won't reconize it
Click to expand...
Click to collapse
From what I could read, the only way into the phonr now for you is the fastboot. You are able to get into fastboot. So theoritically you could flash a custom recovery again and save your phone, provided your computer recognises the phone.
So, I beleieve there is no point in trying to look for a diifrent PC. Your PC should be fine. Make sure you are connecting the phone to USB 2.0 port and not to a 3.0 port. Use the standard USB cable that comes with the phone and not any cable. Uninstall all HTC software inluding drivers and wipe your computer clean using something like Ccleaner. Restart. Download and install latest HTC Sync Manager. Dwnload latest SDK package (64 or 32 bit depending on your PC). Use the latest fastboot/adb files to ping your phone and see if it works. If it works, then I beileve you know how to flash a custom recovery. Please keep us posted on your progress.
Click to expand...
Click to collapse
harihacker said:
LarsRosenberg said:
From what I could read, the only way into the phonr now for you is the fastboot. You are able to get into fastboot. So theoritically you could flash a custom recovery again and save your phone, provided your computer recognises the phone.
So, I beleieve there is no point in trying to look for a diifrent PC. Your PC should be fine. Make sure you are connecting the phone to USB 2.0 port and not to a 3.0 port. Use the standard USB cable that comes with the phone and not any cable. Uninstall all HTC software inluding drivers and wipe your computer clean using something like Ccleaner. Restart. Download and install latest HTC Sync Manager. Dwnload latest SDK package (64 or 32 bit depending on your PC). Use the latest fastboot/adb files to ping your phone and see if it works. If it works, then I beileve you know how to flash a custom recovery. Please keep us posted on your progress.
Click to expand...
Click to collapse
Can you please tell me where I can find the latest fastboot/abd and skd package can find and if I have them what should I do?
Click to expand...
Click to collapse
LarsRosenberg said:
harihacker said:
Can you please tell me where I can find the latest fastboot/abd and skd package can find and if I have them what should I do?
Click to expand...
Click to collapse
this is ADB files , be sure to extract it in folder (e.x ADB files) in your System partition (e.x C:\)
hope these files help you
Click to expand...
Click to collapse
this is HTC Driver if you can't find it Ver. 4.10.0.001.exe, i think the latest one
Right click>Run as Administrator
http://www.mediafire.com/download/3mywbswsomwkih2/HTC+Driver+4.10.0.001.exe
moha_moha20106 said:
this is HTC Driver if you can't find it Ver. 4.10.0.001.exe, i think the latest one
Right click>Run as Administrator
http://www.mediafire.com/download/3mywbswsomwkih2/HTC+Driver+4.10.0.001.exe
Click to expand...
Click to collapse
Thank you!
can you please tell me what to do from the beginning because I don't really know how you use abd and how I manually flash a recovery.
btw I really appreciate all the help!
LarsRosenberg said:
Thank you!
can you please tell me what to do from the beginning because I don't really know how you use abd and how I manually flash a recovery.
btw I really appreciate all the help!
Click to expand...
Click to collapse
First uninstall all mobile/phone softwares in your PC Like Mobogenie, samsung Kies, etc
restart your system, install HTC Driver (right click>Run as Admin.)
open HTCSync>Help>check for updates
copy extracted ADB.zip folder to your System partition (e.x C: \ )
restart again, connect your phone on pootloader (hold Vol. Down+power >press power once)
you must be connected to your pc as well
can you click Thanks
Thanks..
moha_moha20106 said:
LarsRosenberg said:
this is ADB files , be sure to extract it in folder (e.x ADB files) in your System partition (e.x C:\)
hope these files help you
Click to expand...
Click to collapse
Thanks..:good:
Click to expand...
Click to collapse
moha_moha20106 said:
First uninstall all mobile/phone softwares in your PC Like Mobogenie, samsung Kies, etc
restart your system, install HTC Driver (right click>Run as Admin.)
open HTCSync>Help>check for updates
copy extracted ADB.zip folder to your System partition (e.x C: \ )
restart again, connect your phone on pootloader (hold Vol. Down+power >press power once)
you must be connected to your pc as well
can you click Thanks
Click to expand...
Click to collapse
Bad news I idd all this 2 times and it didn't work....
When I want to erase the cache hè just says waiting for device
LarsRosenberg said:
Bad news I idd all this 2 times and it didn't work....
When I want to erase the cache hè just says waiting for device
Click to expand...
Click to collapse
can you check FAQ #2 in this guide , read carefully, step by step
maybe same problem
Hey i have got a very similiar problem tried to load the new androidhd 62 kitkat on my the phone with the wrong custom recovery.
now i am stuck in bootscreen.
I can enter bootloader and fastboot. can´t enter cwm recovery fails everytime and restarts.
when i am in bootscreeen phone will be recognised but the big problem is when i am in fastboot the drivers seem not to work anymore so phone wont be recognised and can´t get anything going. I entered the device manager when i am in bootscreen the driver is working when in fastboot there is a ? at the driver and not really responding .
what can i do?
Hi all I have just bought my xz and I'm trying to root 4.3 but my computer won't see usb debugging the root tools just says device not connected even though I can browse through my address cards I have installed flashtool drivers and adb drivers that. Way because the prompt never popped up when I first connected my phone but still can't see usb debugging. Any ideas. Thanks
Unplug the device from the computer
Download latest adb, which is most likely outdated
Turn off USB debugging and turn on again
Connect it to the computer
Accept the key popup
Run adb
Google will help you more than me, as I did this from memory and used Google a few days ago with the same problem.
antonio1475 said:
Unplug the device from the computer
Download latest adb, which is most likely outdated
Turn off USB debugging and turn on again
Connect it to the computer
Accept the key popup
Run adb
Google will help you more than me, as I did this from memory and used Google a few days ago with the same problem.
Click to expand...
Click to collapse
Thanks Bro I did a Google search first but didn't find anything related to my problem
gavster26 said:
Thanks Bro I did a Google search first but didn't find anything related to my problem
Click to expand...
Click to collapse
Download the latest version of flashtool from http://www.flashtool.net/download.php
navigate to the driver folder and install the fastboot and flash mode drivers.
open flash tool put your phone is fastboot it will install the latest drivers automatically.
after that try rooting following the below procedure
http://techbeasts.com/2014/02/21/ro...-latest-10-4-1-b-0-101-firmware-how-to-guide/
androidtweaker1 said:
Download the latest version of flashtool from http://www.flashtool.net/download.php
navigate to the driver folder and install the fastboot and flash mode drivers.
open flash tool put your phone is fastboot it will install the latest drivers automatically.
after that try rooting following the below procedure
http://techbeasts.com/2014/02/21/ro...-latest-10-4-1-b-0-101-firmware-how-to-guide/
Click to expand...
Click to collapse
Sorry already sorted it out Bro I ran adb kill-server adb start-server and accepted the prompt on my z now all well but thanks anyway
gavster26 said:
Sorry already sorted it out Bro I ran adb kill-server adb start-server and accepted the prompt on my z now all well but thanks anyway
Click to expand...
Click to collapse
:good::highfive:
My phone unsuddenly bricked after I reboot my phone.Can't even boot into recovery cause Sony logo appear for a second and turned off.My phone even don't charge.I tried to flash stock rom via flashtool but phone not detected or after pressing vol down button nothing happened.I also tryed to use fastboot mode to flash boot.img but nothing happened though My phone can turn into fastboot mode.What should I do now?Senior XDA members please help.:crying:
Edit:how can i fix adb "device not found" issue?I installed all the necessary drivers but still not solved. Can't flash stock rom because vol down button not working but the button is fine.
Edit2:How can I fix adb driver issue that not recognizing my phone?
Problem solved!
Maybe died flash boot
Chum.zuizui said:
Maybe died flash boot
Click to expand...
Click to collapse
So is that mean my phone hard bricked?
Røbin said:
So is that mean my phone hard bricked?
Click to expand...
Click to collapse
Yes.i think so
Chum.zuizui said:
Yes.i think so
Click to expand...
Click to collapse
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Røbin said:
I don't think so because this happened to me long ago when I tried to unlock bootloader.But I did something to the driver to work adb properly and it worked.And now I forgot that method and couldn't find in google also.So I'm really in big trouble.I just don't know why when I want to flash the stock rom and flashtool show in popup to power off the phone and press vol down button and connect to computer using usb cable but vol button don't work or not give any signal to computer.So I can't flash the rom.
Click to expand...
Click to collapse
Yes.good luck for you
hagar006 said:
Go to sony official site and download drivers.. ZR drivers dont exist but you can use drivers for Z, install those on your computer and use the fastboot method again and you should be fine.. Your phone is only soft bricked.. Hard brick is when there are absolutely no life in the phone at all.. Use a boot.img you know will work and no need to flash stock ROM once you're in recovery.. Unless you want to of course.. Custom ROM will boot your phone just fine
Also take your battery out and re-insert to make sure your phone is properly off.. Flashtool should also work after that
Click to expand...
Click to collapse
ZR driver exist in Sony developer website and I installed the driver but I don't know why my computer not recognizing my phone.My phone can turn into fastboot mode(blue light on when pressing vol up and connecting cable to pc) but when I type command "adb devices" the listed device is empty I mean no adb fastboot device found.I'm just asking the drivers are not working beacuse of windos 10?Actually when after I use custom rom I couldn't connect my phone to pc.So any driver can fix this problem?I searched really hard on google but couldn't find any proper sloutions.
Chum.zuizui said:
Yes.good luck for you
Click to expand...
Click to collapse
This isn't helping!
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
hagar006 said:
Windows 10 is a pain to install drivers into.. But use fastboot in flashtool instead of flasmode.. Should recognize your phone and flash the boot image from there
Click to expand...
Click to collapse
I know you are trying to help me but I tried everything and nothing is working.I installed driver from flashtool but still no clue why pc not recognizing my phone.My phone is like a live junk.My phone soft bricked many times and I could recover my phone with flashtool so I know what to do but this problem is way more confusing.I just need to know what is causing this issue.
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
hagar006 said:
You've managed to install the drivers inc the lagan drivers in flashtool and connected your phone in fastboot mode with flashtool running and flashtool still don't recognize your phone? I've done that loads of times even with no drivers installed and flashtool has been able to recognize the device in fastboot.. If that's the case, then I'm sorry I'm not able to help any further as flashtool has always been my failsafe when things have gone wrong.. Adb and fastboot are usually no help for me in Windows 10..
Click to expand...
Click to collapse
Flashtool is the best tool to recover soft bricked phone I know but this problem is way more complicated.
Thanks that you tried to help me.I hope I'll figure it out some time later.
Røbin said:
This isn't helping!
Click to expand...
Click to collapse
I dont meant it like that .did you fix it
Chum.zuizui said:
I dont meant it like that .did you fix it
Click to expand...
Click to collapse
Unfortunately no.For some reason pc not detecting fastboot device even after I installed fastboot driver.
same problem plz help
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
pralay445 said:
I have same problem . phone not charging ,not booting , just sony logo comes for a sec then it turns off .
I'm tired of searching for a solution almost a week but nothing helped me.
Last day i flashed a stock rom via flash tool , still problem persists .
Pc companion -no detection of device , can't boot into recovery mode..
Please guys help me.. I'm in serious trouble with my phone
Click to expand...
Click to collapse
My problem was created because local charger damaged my phone battery.So I couldn't turn on my device like yours.I replaced the battery and charger from Sony Center and now my phone is good as new.So Try to use other good battery(small or similer size that suites to your phone's battery pin)and see if your phone turns on without any issue.Then you can target the problem.
how can downgrade my xperia Z1 after installing nougat AOSP
I'm using Ubuntu 16.04
I tried installing with flashtool but cannot detect the phone in flashmode !
the code *#*#7378423#*#* doens't return anything !
m3asmi said:
how can downgrade my xperia Z1 after installing nougat AOSP
I tried installing with flashtool but cannot detect the phone in flashmode !
the code *#*#7378423#*#* doens't return anything !
Click to expand...
Click to collapse
have you check android debugging and unknown sources?
pattriccio said:
have you check android debugging and unknown sources?
Click to expand...
Click to collapse
yes I did
I installed flashtool in windows now I solved the problem
hi, i am using flashtool on windows and my flashtool doesnt recognize my phone in flashmode, win does recognize phone as somc device, any help would be appreciate.
ajdin.cekic said:
hi, i am using flashtool on windows and my flashtool doesnt recognize my phone in flashmode, win does recognize phone as somc device, any help would be appreciate.
Click to expand...
Click to collapse
follow this tutorial https://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
thank you, i tried as you said but nothing happend again when i put my phone in flashmode flashtool doesnt recognize it again you can see it on
http://prntscr.com/ejwx09
ajdin.cekic said:
thank you, i tried as you said but nothing happend again when i put my phone in flashmode flashtool doesnt recognize it again you can see it on
http://prntscr.com/ejwx09
Click to expand...
Click to collapse
OK, so I'm gonna assume that you have at least a working recovery. Here's a possible solution: Have you tried flashing a stock based custom ROM (e.g: Kryptonian, MX Rom or DStrikers Z1 Kai)? Then, from there you can flash a pure stock via flashtool.
guys, this was mentioned a couple times already, best way is to download Emma from Sony and flash the official software. Then you can flash a kernel via fastboot again and all should work. This is due to Nougat is corrupting the apps log partition which is not in use there, but is required for stock Lollipop. I did that a couple times and all worked fine...
Ok, i will try the mxrom and than, but i tried that already and do i need first to lock my bootloader and then flash stock, emma didnt recognice my phone same as flashtool and one thing more, i tried to flash kernel sin from ftf via fastboot bud it says image is not boot image and says fail. I tried on win 10 same to do win recognizes phone as somc bit flashtool doesnt recognize phone.