Database Develop

keyboard not working after disassembling

i recently disassembled my tilt to find out if i could tighten the hinges because the hinge were loose but ended having problems with the keyboard. i hooked up the wire that connects from the keyboard to the motherboard. now the problem is that i could only use half of the character.
do you guys encounter this kind of problem? and did you guys fix it?
thanks

draztik_beast said:
i recently disassembled my tilt to find out if i could tighten the hinges because the hinge were loose but ended having problems with the keyboard. i hooked up the wire that connects from the keyboard to the motherboard. now the problem is that i could only use half of the character.
do you guys encounter this kind of problem? and did you guys fix it?
thanks
Click to expand...
Click to collapse
PM Mike, he will lead you in the right direction.
http://forum.xda-developers.com/member.php?u=335322

Buy a new keyboard with flex cable on ebay.
I replaced my tilt keybard (with silver keys) with the original all black keys.
The keys, the flex cable, the board ~ everything is one solid peace that's soldered and glued together, it's not removable (without damaging). The flex cable is actually sensitive and can break. If you try to mess with the keyboard, putting a lot of pressure on the silver part under they keyboard, or make a dent on the silver part under the keyboard (in the effort of trying to separate the keys and the board, which is impossible) ~ you might end up pressuring the flex board/wires and cause only half of the keys work and half doesn't, and the cap-lock and func light won't turn on.
Remember to get the keyboard with the whole frame and flex wires and not just the plastic keys by itself.
The whole black rim, flex cable/board and the silver bottom piece is all soldered together as one solid piece. The plastic keys are like sticker, lay on top of the board and flex.
(your board and flex seem broken anyway, but...)
If you only buy the keys without the whole board together, you will have to rip out the old plastic keys layer (because it's just a layer of sticker on top of everything) ~ do it carefully, or you might rip out the flex cables/board by accident.
Let me know if you want some pixs that I took when I replaced my keys.

draztik_beast said:
i recently disassembled my tilt to find out if i could tighten the hinges because the hinge were loose but ended having problems with the keyboard. i hooked up the wire that connects from the keyboard to the motherboard. now the problem is that i could only use half of the character.
do you guys encounter this kind of problem? and did you guys fix it?
thanks
Click to expand...
Click to collapse
Wad there possibly a alternative from getting a whole new board as i only replaced the screen mine.............

I had a similar problem when replacing the screen on my wife's Tilt recently. I took it apart a second time and put it together again very carefully, particularly with the small ribbon that connects to the motherboard, as I believe that is the ribbon that connects the keyboard to the motherboard.
Take a look at this video to see the part I am referring to: http://www.youtube.com/watch?v=96iXd5jG2-U#t=2m45s

HD2 Repair

Hey guys,
The USB port of my HD2 broke off and I was forced to replace the motherboard. When I assembled the HD2 again, I could immediately see that there was something wrong with my screen. The screen couldn't display full color (only bright red/orange/white/dark green/cyan accents). Also, the 'hang-up button isn't responding anymore after I replaced the motherboard (and flexcable).
What happened? Is there something wrong with the lcd display or did something go wrong when I (dis)assembled the phone? I took the motherboard and the flexcable from another HD2 that had a broken display.
Thanks in advance.

bilaba70 said:
Hey guys,
The USB port of my HD2 broke off and I was forced to replace the motherboard. When I assembled the HD2 again, I could immediately see that there was something wrong with my screen. The screen couldn't display full color (only bright red/orange/white/dark green/cyan accents). Also, the 'hang-up button isn't responding anymore after I replaced the motherboard (and flexcable).
What happened? Is there something wrong with the lcd display or did something go wrong when I (dis)assembled the phone? I took the motherboard and the flexcable from another HD2 that had a broken display.
Thanks in advance.
Click to expand...
Click to collapse
So you completely voided your warranty through HTC and tried to fix the device yourself, then screwed it up. I'd still say send it to HTC and ask for a repair. I don't know if they'll do it or not, unless you used official parts. I know they do out-of-warranty repairs, but they'll charge you.....

Yep you screwed up the repair, those ribbon cables need a delicate touch & any handfisted moment ends up with what you have got now ...
Another careful strip & inspection of all ribbon connectors is needed ...

I bought it as a second-hand phone. The guy didn't give me a reseat and the HD2 was flashed a WP7 ROM.

For the button problem, how are you turning your phone on without that button? do you hear/feel it click when you press it? If not its just misaligned.the buttons are on a flex ribbon cable with two holes on each side. it fits on the plastic middle frame of the phone which has two small spikes coming out of it... it has to be perfectly placed for your buttons to actually click..
if the flex ribbon is broken however you can buy one off ebay for arround 10$ any will do, mine is not original works fine..
for the screen you could have messed up the lcd, did you separate from the glass-digitizer? if you did you probably screwed it up.. its not a easy thing to do.. also was not necessary for your repairs
the connection to the motherboard might not be all the in and clipped which might cause your problem... (being that two of the little pins provide voltage and ground while all the others provide data information if one of those pins is not in all the way a piece of data might not be displaying for example a color. Never seen that happen its theoretically possible thou)
well I have only opened my phone 3 times and dont claim to be a expert.. but this is my take on it... Good luck!

@pablow Thanks for the detailed response.
The HD2 is only turned on, after I place the battery. Otherwhise it won't start.
I hear a click on the (broken) 'off' button, everytime I press it. I also noticed that the inside of not all of the 'spikes' are empty. I can see a bit of the flexcable in the spike of the broken 'off' button. The spike of the (working) 'call' button is empty.
I think that the flexcable hasn't been connected securely to the motherboard. I'll try connecting everything again tonight.

not that it makes much difference but HTC wouldn't of fixed it through warranty because of usb damage anyway

I thought so, thanks for the heads-up anyways.

[Solved] Display is fixed
Update:
I disassembled the HD2 and reconnected everything (from coax to flexcable). Fortunately it worked! The display is how it should be.
I have another problem now. All of the buttons don't work now, exept for the dial button. Do these buttons break so fast? It's annoying as fuark, because I have to disassemble it another time in the future to fix the buttons.
I also couldn't re-attach the volume control tab when assembling the HD2.

[Q] What happened to my screen?

Hey guys,
I recently bought a Samsung Galaxy S i9000 and the Amoled screen has some serious issues with colours. It appears that the red part of the screen is messed up and cannot display any true white anymore. This happens in download mode, recovery, even in a custom ROM. It's definitely hardware. This video should explain it:
Yes, this phone is pretty much screwed, and the home key is no longer functional at all now. However, I've fixed the rotation sensor issue, and I've thought about repurposing it at a remote for my XBMC media center
Firstly, has anyone seen this issue with the screen before, and secondly, has anyone fixed it? It may be an internal connector which is loose. Suggestions would be good, otherwise I'll just have to put up with the annoying blue tint.
Cheers!

Anyone? Is this more likely to be the panel itself or a cable? Wondering if it's fixable or maybe the connector could be corroded...

Take it apart, remove the mainboard, and clean the board with Isoprophyl-alcohol. Its a 70% alcohol, here in germany you can buy it in a pharmacy. I use a paintbrush to get electronics clean safly.
And also clean the connectors that go from the phone to the board with the alcohol. I suspect there is some kind of water damage in your phone. Samsungs are realy *****y when it comes to water. Even sweat sometimes is enough to cause problems.
To take it apart you only need to remove the 7 screws under the back cover, pull of the back and the board is just held in place by the connectors.
Try youtube if you get stuck. There are some Galaxy S disassembly videos.

[Q] M7 no display after replacing battery

Hi
I tried to replace my battery and after assemble it back i only get a black display when turning my m7 on.
I broke this little plastic thing from the display cable off (look in attachment)
Is this thing essential for a working display? (i thought i can fix it with a drop of glue)
Should the display work when the backcover is off the device? Because there are some connectors on the backcover....
cheers

00Nuclear00 said:
Hi
I tried to replace my battery and after assemble it back i only get a black display when turning my m7 on.
I broke this little plastic thing from the display cable off (look in attachment)
Is this thing essential for a working display? (i thought i can fix it with a drop of glue)
Should the display work when the backcover is off the device? Because there are some connectors on the backcover....
cheers
Click to expand...
Click to collapse
Shouldn't have done that, I think you accidentally broke something. I'd send it to a HTC service center. But that's gonna cost you probably.

nah, official repair isn't worth it. The phone is more than 2 years old...
and yes i think i broke something... thats why im asking

You're gonna have to be good with a solder and a couple of tiny wires if you want to revive your phone.

00Nuclear00 said:
Hi
I tried to replace my battery and after assemble it back i only get a black display when turning my m7 on.
I broke this little plastic thing from the display cable off (look in attachment)
Is this thing essential for a working display? (i thought i can fix it with a drop of glue)
Should the display work when the backcover is off the device? Because there are some connectors on the backcover....
cheers
Click to expand...
Click to collapse
You definitively need this clip to be intact so the flex cable sits firmly in place otherwise you'll have bad contact between the cable and the pins.
If you don't want to send to HTC for repair you'll need at least to send it to your local electronic repair shop so someone skilled with the proper soldering tool (not the standard iron you have at home) can replace the connector. BTW some of these clips must be lifted from the cable side and some other from the opposite side of the cable, so next time use tweezers and apply very light force on each side you'll find from what side it must be lifted.
LCD should work fine with the back cover removed, afaik. Connectors in the back cover are often for antennas but I wouldn't recommend to run the phone with antennas disconnected to avoid damaging the radio chips (reflected power).
If you are from the US, you can easily find this connector on ebay for about 10$. I'm sure it won't be that much expensive to repair if you bring the new connector and the phone already disassembled to your local repair shop.
Btw are you sure its only the LCD? When trying to boot the phone can you here the HTC theme or does it vibrate? Recognized by your computer when connected with usb?

thx for your response
I found an replacement part on ebay but first i have to look for someone who can solder this for me.
When i try to turn it on it only vibrates without a htc theme sound and there is no display reaction.
The other thing i mentioned is that the phone gets very hot in the middle (should be the cpu) where i dont know if it should get that hot.
I have to try the pc connetion again and let you know asap.

00Nuclear00 said:
thx for your response
I found an replacement part on ebay but first i have to look for someone who can solder this for me.
When i try to turn it on it only vibrates without a htc theme sound and there is no display reaction.
The other thing i mentioned is that the phone gets very hot in the middle (should be the cpu) where i dont know if it should get that hot.
I have to try the pc connetion again and let you know asap.
Click to expand...
Click to collapse
I'm not really worried about the absence of HTC sound when booting, if your phone is on silent / vibration mode, it will only vibrate when booting. If your computer does detect it once booted, then I guess the broken connector clip is the problem.
---------- Post added at 09:49 AM ---------- Previous post was at 09:27 AM ----------
Here is a video about the connector replacement, it doesn't look that hard to replace but wouldn't recommend to do it yourself if you never soldered electronics before. Soldering isn't that hard but you need some practices and knowledge to make good joints. I don't think your phone motherboard is a good candidate to practices yourself if you never did it before. You'll also need a really tiny tip for your iron, probably a type "L", 50/50 solder + some flux. Flux must be cleaned after use to avoid corrosion. The most difficult when soldering on motherboard, imo, is to find the right temperature. If your iron is to hot, you'll damage your connector. If its not hot enough, solder will take more time to liquefy and some heat will be absorbed by surrounding components which can cause irreversible damage.

Easy fix mate
You don't need to replace the connector, I've done this before, it is just the connector clip that has come off and it goes back on reasonably easily.
You will need a good magnifier.
You will need a good light source.
The phone held securely on its side with the socket pointing up.
Some masking tape on the loose part because it WILL go "ping" into the distance if you don't and you will not find it.
Look at the other connectors to see the proper orientation for the part, mark it with a permanent marker on top and at one end.
The insertion looks difficult, it isn't too bad, keep the part nice and straight and the motion is kind of like clicking it down on the ribbon.
Forget replacing the connector, that is 100 times harder.
If you do lose the loose part I have one or two laying around.
Good luck.

Failed display + frame repair

Hi guys
I just changed my mi 9 lite display incl frame the other day. Old one was cracked and dead.
Followed a legit online instruction on how to do the procedure and it went quite well. At least that's what I thought...
It appears that I might have caused damage or done something to the mainboard. If I put everything were it's suppose to be and fit the mainboard with the screws the phone gets stuck in a bootloop as soon as it starts. It starts showing the Mi logo and then it turns black and starts over and over until a disconnect the connector from the battery.
However if I lift the mainboard from the frame just a few millimeters the phone is able to start and the screen works.
I figure I have damage some part and I'm guessing it won't be a fixable issue unless I change the main board. I just want to reach out to see if anyone has run into something similar or happens to know if I've done a simple and fixable error.
Here's a video of the bootloop:
https://imgur.com/a/JOcap23
All type of help is appreciated!

The mobo was likely damaged by the impact. BGA chipsets are particularly sensitive to board flexing and no way to examine the hidden solder joints for damage. Use optical magnification and carefully examine all visible solder jionts for fractures. Double check all connectors for damaged pins.
The mobo is suspectable to ESD damage as well when out of circuit. ESD protocols should be observed. I don't think this is the issue here though but keep it in mind. Static electricity can kill unharden inputs... or cause failures days, weeks even years latter. Insulation at semiconductor junctions is only microns thick and their over voltage tolerance is very low.