Database Develop

Require Simple Screen Protector - No Glass Screen Protector

Hi there!
I need simple plastic film, clear screen protector, similar to what is installed on new OnePlus 3 out of the box, but this one don't cover edges of the LED, leaving about 2mm exposed from both sides.
Kindly someone give me names or links of full screen protector which is not hard glass, but soft regular screen protector which cover complete screen
Or any other Phones screen protect which can cover OnePlus 3, may be of galaxy S7 Edge
Why i need simple screen protector:
- Its thinner
- Its not noticeable, you don't feel if its there
- Prevents scratches
- Don't make device thicker, by putting extra thick layer
- Can access home button/finger print reader easily, without digging your thumb in
Why i hate Glass Screen protectors
- Thicker, makes phone fatter
- Untidy, makes phone bulky
- buries home button further inside
- At times, i have seen they can damage the screen as well

I am using the IQ Shield and I love it. Fits great and was pretty easy to apply.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

I have the iq shield and one thing I didn't like about it is that there is visible orange peeling at certain angles.

chaztro1892 said:
I am using the IQ Shield and I love it. Fits great and was pretty easy to apply.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for replying, but i feel installing that wet thing is little scary, to wet your phone and everything?

dwang said:
I have the iq shield and one thing I didn't like about it is that there is visible orange peeling at certain angles.
Click to expand...
Click to collapse
protector that comes preinstalled on OnePlus 3 seem to be of a very nice quality to me, issue is that, its short, i feel they could extend it little more to sides, just before it curves down, they made it short intentionally to make people buy there full screen or other temper glass screen protectors.
May be i should try to take screen protector of some other phone, like that of Samsung and try to cut it as per OP3.
May be i can extend it to black bars where the screen ends.

I decided to try the Orzly tempered glass. Normally I'm a huge fan of the Spigen Crystal and Ultra Crystal plastic ones - still almost no noticeable marking on the Crystal I have on my LG G4, and the Ultra Crystal on my wife's Nexus 5 literally saved us a screen replacement last winter. I thought the screen HAD broken, down to ordering a replacement to put in it ... but when I peeled the Spigen off, the screen was fine. They don't have one for the OP3 yet though. So this time I thought I'd try something different with the tempered glass. If I don't like it, I'll have to keep looking.
Interested in seeing if there are any good plastic screen protector recommendations though, in case I find that I'm not a fan of the glass ones.

Best non-glass screen protector.
BestSkinsEver Thank me later (or don't b*tch at me when you F up the wet install, ZAGG style)

I actually really like the original film protector. I still have mine on and I got the phone as soon as t was available and it still looks great.
Anyone know where I can get another? They don't seem to have them at the oneplus store.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

Get this blindly-
http://www.amazon.in/Orzly%C2%AE-Protector-OnePlus-Multi-Pack-SmartPhone/dp/B01H7BTSM0?ie=UTF8&redirect=true&ref_=ya_st_dp_summary
You can thank me later

Palauv said:
Get this blindly-
http://www.amazon.in/Orzly%C2%AE-Protector-OnePlus-Multi-Pack-SmartPhone/dp/B01H7BTSM0?ie=UTF8&redirect=true&ref_=ya_st_dp_summary
You can thank me later
Click to expand...
Click to collapse
Why later, have it now!

bryanus said:
I actually really like the original film protector. I still have mine on and I got the phone as soon as t was available and it still looks great.
Anyone know where I can get another? They don't seem to have them at the oneplus store.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Its of good quality, they could cover sides bit more, as curve starts from where black line starts, i guess the made it short for people to buy their accessories and remove it, probably.

GeneralDisaray2 said:
Best non-glass screen protector.
BestSkinsEver Thank me later (or don't b*tch at me when you F up the wet install, ZAGG style)
Click to expand...
Click to collapse
Thanks bro.

Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr

Well I started the Orzly plastic film trend on Xda. Its the first thing I wanted to do after 4 failed tempered glass abd its still the best. Got mine at 499 of 5 pieces. The first one is still in use and I love it.
Sent from my ONEPLUS A3003 using Tapatalk

sangalaxyi9003 said:
Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr
Click to expand...
Click to collapse
Let me know the quality please. I buyed the first one some days ago and I'm waiting fot the delivery.

sangalaxyi9003 said:
Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr
Click to expand...
Click to collapse
They look tempting, but i am not sure how they will even cover the curves, i heard they come off from edges, it would have been better if they had left the curves exposed, just cover the complete LED, just up to the point where LED starts.
Hopefully it will give surprising results.

khandelwalgaurav said:
Well I started the Orzly plastic film trend on Xda. Its the first thing I wanted to do after 4 failed tempered glass abd its still the best. Got mine at 499 of 5 pieces. The first one is still in use and I love it.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Do you have to wet it, to apply?

Ozrly glass protector + spigen rugged case?

Is this still a viable combo? I had it on my oneplus 2 and it was good, I plan on buying a new case and cover when I have the money.
Also, will it look ok with having the black ozrly screen cover on a white model?
Sent from my OnePlus 3

I've ordered and returned 2 orzly glass screen protectors, not going to bother with them again. You can clearly see the dots and fingerprints are much easier to see on it. I'd stay away.

illBelief said:
I've ordered and returned 2 orzly glass screen protectors, not going to bother with them again. You can clearly see the dots and fingerprints are much easier to see on it. I'd stay away.
Click to expand...
Click to collapse
Anything else you'd recommend?
Sent from my OnePlus 3

blureshadow said:
Anything else you'd recommend?
Click to expand...
Click to collapse
I haven't found anything else myself but you can take a look at the dedicated thread in this sub

blureshadow said:
Anything else you'd recommend?
Sent from my OnePlus 3
Click to expand...
Click to collapse
I would recommend a wet application screen protector like Ghost Armor, Zagg Invisibleshield, IQ Shield, Phantom Skinz, Best Skins Ever, XtremeGuard. They're all the same. A perfect install looks really good.

Tikerz said:
I would recommend a wet application screen protector like Ghost Armor, Zagg Invisibleshield, IQ Shield, Phantom Skinz, Best Skins Ever, XtremeGuard. They're all the same. A perfect install looks really good.
Click to expand...
Click to collapse
I've seen in the other topics that the ozrly is in fact recommended by users, but only the v2. I think I'll get that one as I also want the black to cover my phones white parts. A gold-black phone sounds cool.
Sent from my OnePlus 3

I'm staying put on this thread as I'm looking for a TGSP that will work with the Neo Hybrid before I lay out the cash for this phone

TechMinerUK said:
I'm staying put on this thread as I'm looking for a TGSP that will work with the Neo Hybrid before I lay out the cash for this phone
Click to expand...
Click to collapse
On YouTube there is a review of the orzly v2 where the spigen neohybrid case is tested combined with the v2 and it fits.
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

snippem said:
On YouTube there is a review of the orzly v2 where the spigen neohybrid case is tested combined with the v2 and it fits.
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
Click to expand...
Click to collapse
Back with my findings, it's luck of the draw as I had two and one fitted perfectly and one didn't fit at all (Popped up and then snapped at the bottom) :crying:

OnePlus 5T Official Tempered Glass Screen Protector Review

Hi folk,
With another OnePlus product comes another OnePlus attempt at making a tempered glass screen protector which works for it. Will it be this time that is the magic attempt?
If you dont want to or can't watch the video here are my thoughts:
Yes, they seem to have finally made a tempered glass which fits perfectly on the screen without much cut off. I say much as I think there is still a tiny cut off, but it's nowhere near as noticeable as it was on the 3/3t or 5. If you want to take a look, its on the video at around the 4:04 mark.
The quality is excellent, you can barely feel or see that it's there. There are no sharp edges as the screen tapers off at the edge. It's a full glue screen protector so there is no dot matrix or rainbox effects. You do however have to be fairly careful whilst applying it and taking it off its bed as it feels like it could snap fairly easy if you rush it.
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Let me know if you have any questions.
Jono

Thanks for that, good to know as I ordered one with my 5T.
Hopefully there is a decent bunch of 3rd party ones too.

A spigen tempered glass is my all time favorite screen guard.

niijonodhg said:
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Click to expand...
Click to collapse
Thanks for this. I wanted to know how much it will cut of the screen but its much lesser than earlier.
But i need to disagree something with you. You (and many others) said it was issue etc. on OP3/3T/5 what last TGSP cutted off screen. Well it wasnt really issue or fault on Oneplus side. They needed to choose to have adhesives only on sides and no cut-off or adhesives on fully but had to cut-off. That was because of OP3/3T/5 front glass design where glass started ro bend (2.5D) earlier than usual. Thats why black borders was bigger as otherwise you would get ugly halo's and nobody likes that.
About price. Dont know where you leave but here in Finland 20€ price is nearly cheapest TGSP avaible here. Usually TGSP's here costs around 25-50€ depending of phone model so 20€ is more than just normal price for us. So okay maybe its little pricey compared ro your country but on many others it isnt.

This is my first OP device so I know nothing about past issues, but this is by far the best fitting, best sealing TGSP I have ever installed. Typically with screen protectors the edges do not want to seal/stick but the squeegee made quick work of getting all the bubbles out. There are a few pieces of inevitable lint but not one single bubble.
It does cut a tiny bit of the screen off which gives a weird depth to the screens appearance so for that I give it 9/10. If it was totally clear or just had the black at the top and bottom it would be 10/10 for sure.

Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk

DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I'm using the original one and is perfect with the original case/Bumper.
Mine is not so perfect and the screen is slightly cover on the edge. is not a huge problem, but is noticeble if you see the phone from a side.
in any case is far better than the original plastic protector and perfect with a case.

DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.

niijonodhg said:
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
Click to expand...
Click to collapse
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk

Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.

DeathStroke said:
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Which case do you have?
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
Honestly, I haven't noticed.

niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
The one that came in the box. I want to order a 3d tempered glass and a premium case so that they can work together. Looking yet for a compatible combo.
Sent from my ONEPLUS A5010 using Tapatalk

niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
I just removed the protector to see how the screen looks naked. The "grainy-ness" is gone. I also noticed a potential problem with the protector. The adhesive doesn't go all the way to the top or bottom of the protector, so when I removed it I found a lot of dust stuck to the top and bottom bezel of the phone. This could cause scratches. Even though the scratches would not be on the display, I don't want scratches anywhere on the glass. If I keep this phone I'll try an IQshield.

With the bubbles settling behind, a lot of little dust has been captured.

I also notice grainy-ness. I'm likely going to ditch it and just go naked...

I just got my for 10€. And yes, it still crops a bit from both sides but not like OP3/3T/5. And yes, there is grainy-ness as stated above. You cant notice on black background but on white yes.

I bought the '5T full scratch protection' bundle with my phone. I have an unopened "3D Tempered Glass Screen Protector" and an opened (but unused) "Sandstone Protective Case". My plan was going to be to use the case until Spigen comes out with a 5T case, but I just decided to rock the case that came with my 5T instead.

lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
To be frank I wouldn't have noticed the grainy screen till I read your comment. But now that I've read it.... The screen protector does induce the grainy effect. It's a perfect fit imho, though it definitely does give out that grainy effect. I'm guessing I'll stop noticing it in a couple of days time.

I had an extra IQshield (wet apply) protector for a Pixel 2 XL. I cut a little off the top and it fit fine. I must say, the IQshield is very clear, no grainy screen for me.

I have to put my 2 cents in on this. The official tempered glass is pretty great. I had no issue installing, it stayed in place, zero bubble at all, and feels great. using it with the official sandstone case.

Oneplus 5T Official Tempered Glass Installation

I Just bought these and these are the best for the 5T.
Check how to install here -

matrix.bharath said:
I Just bought these and these are the best for the 5T.
Check how to install here -
Click to expand...
Click to collapse
I'm thinking of buying the OP5T On-the-Go bundle (which will cost abt 2k) is it worth that price?

rondias18 said:
I'm thinking of buying the OP5T On-the-Go bundle (which will cost abt 2k) is it worth that price?
Click to expand...
Click to collapse
the case will not give you drop protections. wait and buy spigen or any drop protection case. highly recommend that.. for now just pick the screen guard.

matrix.bharath said:
the case will not give you drop protections. wait and buy spigen or any drop protection case. highly recommend that.. for now just pick the screen guard.
Click to expand...
Click to collapse
OMG! Yes, I've been thinking the same thing. There were a few xda users that said the Spigen cases were overrated. I'll consider getting the screen guard. Need to see it in person.

I bought the Official Glass Protector. Installation went okay but I managed to get a few small dust specs to catch onto the bottom of the glass so have a few bubbles. Other than that it is perfect. Can't even tell a glass protector is on. Touch response remains the same too.

The original OP 5T case is outstanding, it has a very good grip and looks like carbon fiber material and not to forget the 1+ legendary logo on the back.

does it go above the case or is it pretty even with the stock case? meaning is the screen protector thick

Also got the official tempered glass protector.
Touch response and feel is fine, but both sides have been clipped by the black side bars of the protector, not much, but noticeable especially if watching a zoomed video, on the fastboot screen and unlocked bootloader warning screen (ala OP5).

soxfor said:
Also got the official tempered glass protector.
Touch response and feel is fine, but both sides have been clipped by the black side bars of the protector, not much, but noticeable especially if watching a zoomed video, on the fastboot screen and unlocked bootloader warning screen (ala OP5).
Click to expand...
Click to collapse
Cropping is much smaller than what it was with OP3/3T/5.

Yes it's less, just thought mentioning it's still present was relevant.
Sent from my OnePlus 5T using XDA Labs

Whoever wishes to install the glass, do it in your bathroom after having a hot steamy shower. The price of the glass is totally justified iff you are able to install it properly without any single bubble. Otherwise its a waste. I really wouldn't recommend it to anyone who hasn't installed screen protectors by themselves because you are bound to go wrong either with the alignment or the application/cleaning. Go for a good quality plastic screen protector instead or keep your original screen protector that came with the phone

I bought the official big boss bundle.
The glass protector was great and fitted perfect without any bubbles.
I gave the headphone to my friend as I already had a good pair and the case is a bit useless it's not even raised or anything so does jot protect it at all, I went for the carbon fibre one.
Sent from my ONEPLUS A5010 using Tapatalk

ultimate shields full tempered glass (full glue)

Hi guys,
I've recently got a tempered glass from ultimate shields for review.
Please note this is a full cover tempered glass with full glue in black surround 2.5D edge.
The package came with wet and dry a cloth, a microfiber cloth and dust stickers.
Installation was very easy and minimum bubbles around the edge was only viewable shortly after installing but with a gentle push they dissapeard giving a bubble free installation.
All cutouts are accurate.
Sensitivity is spot on with no issues at all.
There is no dot matrix on this screen protector like some.
Atm I only have the case that came with the 5T and this screen protector gives no issues with this case.
This screen protector seems to be almost the same as the oneplus original but at a lower price around £11.99 at the time of writing this.
If your looking for a screen protector at a much decent price then go over to ultimate shields on eBay and make a purchase.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/142606443907
If you found this useful give me a thanks

Does it cut the sides as official tempered glass?

Really curious to the same question as posted above I removed the very expensive official one because of the cut of on the sides.
Parts of subtitels where just missing
Verstuurd vanaf mijn ONEPLUS A5010 met Tapatalk

moneyvirus said:
Really curious to the same question as posted above I removed the very expensive official one because of the cut of on the sides.
Parts of subtitels where just missing
Verstuurd vanaf mijn ONEPLUS A5010 met Tapatalk
Click to expand...
Click to collapse
You can compare the original one with this Invisible Shield version by comparing this image with your own phone:
I think the cutoff is about the same, if not worse

1) Is there glue where the screen is? Or is the glue only on the black edges?
2) Do you see a Halo rainbow effect on the center of the screen from different lighting?

mandarpalshikar said:
Does it cut the sides as official tempered glass?
Click to expand...
Click to collapse
Yes it's the exact same with the sides as the oneplus original although I don't have the original protector to compare unfortunately but I believe it's ever so slightly bigger and I noticeable loss of screen .
Apparently they are not able to shorten the black bars as they said bubbles will appear where it hasn't stuck properly near the curve as well as halo affect will accure.

moneyvirus said:
Really curious to the same question as posted above I removed the very expensive official one because of the cut of on the sides.
Parts of subtitels where just missing
Verstuurd vanaf mijn ONEPLUS A5010 met Tapatalk
Click to expand...
Click to collapse
From my umderstanding after talking to ultimate shields the black bars are there for a purpose as if any shorter they will show bubbles where contact isn't perfect close the edge.
They will be no revisions for the protector as my review units I received for the Samsung s8+ it was revised at least 4 times but still failed to be perfect.
So for the price it's a good protector with perfect fitment and touch sensitivity. The black bars unfortunately are going no where

lemonspeakers said:
1) Is there glue where the screen is? Or is the glue only on the black edges?
2) Do you see a Halo rainbow effect on the center of the screen from different lighting?
Click to expand...
Click to collapse
It is full screen glue covers the whole protector, and no halo affects there is no dot matrix at all. Viewing is perfect believe me.

Is there a US seller?

JedixJarf said:
Is there a US seller?
Click to expand...
Click to collapse
It's a UK seller but may ship to us