Related
Hi there!
I need simple plastic film, clear screen protector, similar to what is installed on new OnePlus 3 out of the box, but this one don't cover edges of the LED, leaving about 2mm exposed from both sides.
Kindly someone give me names or links of full screen protector which is not hard glass, but soft regular screen protector which cover complete screen
Or any other Phones screen protect which can cover OnePlus 3, may be of galaxy S7 Edge
Why i need simple screen protector:
- Its thinner
- Its not noticeable, you don't feel if its there
- Prevents scratches
- Don't make device thicker, by putting extra thick layer
- Can access home button/finger print reader easily, without digging your thumb in
Why i hate Glass Screen protectors
- Thicker, makes phone fatter
- Untidy, makes phone bulky
- buries home button further inside
- At times, i have seen they can damage the screen as well
I am using the IQ Shield and I love it. Fits great and was pretty easy to apply.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
I have the iq shield and one thing I didn't like about it is that there is visible orange peeling at certain angles.
chaztro1892 said:
I am using the IQ Shield and I love it. Fits great and was pretty easy to apply.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for replying, but i feel installing that wet thing is little scary, to wet your phone and everything?
dwang said:
I have the iq shield and one thing I didn't like about it is that there is visible orange peeling at certain angles.
Click to expand...
Click to collapse
protector that comes preinstalled on OnePlus 3 seem to be of a very nice quality to me, issue is that, its short, i feel they could extend it little more to sides, just before it curves down, they made it short intentionally to make people buy there full screen or other temper glass screen protectors.
May be i should try to take screen protector of some other phone, like that of Samsung and try to cut it as per OP3.
May be i can extend it to black bars where the screen ends.
I decided to try the Orzly tempered glass. Normally I'm a huge fan of the Spigen Crystal and Ultra Crystal plastic ones - still almost no noticeable marking on the Crystal I have on my LG G4, and the Ultra Crystal on my wife's Nexus 5 literally saved us a screen replacement last winter. I thought the screen HAD broken, down to ordering a replacement to put in it ... but when I peeled the Spigen off, the screen was fine. They don't have one for the OP3 yet though. So this time I thought I'd try something different with the tempered glass. If I don't like it, I'll have to keep looking.
Interested in seeing if there are any good plastic screen protector recommendations though, in case I find that I'm not a fan of the glass ones.
Best non-glass screen protector.
BestSkinsEver Thank me later (or don't b*tch at me when you F up the wet install, ZAGG style)
I actually really like the original film protector. I still have mine on and I got the phone as soon as t was available and it still looks great.
Anyone know where I can get another? They don't seem to have them at the oneplus store.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Get this blindly-
http://www.amazon.in/Orzly%C2%AE-Protector-OnePlus-Multi-Pack-SmartPhone/dp/B01H7BTSM0?ie=UTF8&redirect=true&ref_=ya_st_dp_summary
You can thank me later
Palauv said:
Get this blindly-
http://www.amazon.in/Orzly%C2%AE-Protector-OnePlus-Multi-Pack-SmartPhone/dp/B01H7BTSM0?ie=UTF8&redirect=true&ref_=ya_st_dp_summary
You can thank me later
Click to expand...
Click to collapse
Why later, have it now!
bryanus said:
I actually really like the original film protector. I still have mine on and I got the phone as soon as t was available and it still looks great.
Anyone know where I can get another? They don't seem to have them at the oneplus store.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Click to expand...
Click to collapse
Its of good quality, they could cover sides bit more, as curve starts from where black line starts, i guess the made it short for people to buy their accessories and remove it, probably.
GeneralDisaray2 said:
Best non-glass screen protector.
BestSkinsEver Thank me later (or don't b*tch at me when you F up the wet install, ZAGG style)
Click to expand...
Click to collapse
Thanks bro.
Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr
Well I started the Orzly plastic film trend on Xda. Its the first thing I wanted to do after 4 failed tempered glass abd its still the best. Got mine at 499 of 5 pieces. The first one is still in use and I love it.
Sent from my ONEPLUS A3003 using Tapatalk
sangalaxyi9003 said:
Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr
Click to expand...
Click to collapse
Let me know the quality please. I buyed the first one some days ago and I'm waiting fot the delivery.
sangalaxyi9003 said:
Guys.. Try these links from Aliexpress. I have ordered both and awaiting for delivery. I hope i covers the complete phone..
https://www.aliexpress.com/item/3D-...2721804042.html?spm=2114.13010608.0.63.w1Ykxr
https://www.aliexpress.com/item/1pc...2712579566.html?spm=2114.13010608.0.55.w1Ykxr
Click to expand...
Click to collapse
They look tempting, but i am not sure how they will even cover the curves, i heard they come off from edges, it would have been better if they had left the curves exposed, just cover the complete LED, just up to the point where LED starts.
Hopefully it will give surprising results.
khandelwalgaurav said:
Well I started the Orzly plastic film trend on Xda. Its the first thing I wanted to do after 4 failed tempered glass abd its still the best. Got mine at 499 of 5 pieces. The first one is still in use and I love it.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Do you have to wet it, to apply?
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
As I bought and still use an Orzly tempered glass protector I concur with your analysis at this time. When I first applied the Orzly is was perfect without the issues some experienced but after 3+ weeks the sides must have lifted slightly due to my bumper case and dust particles got underneath next to the left/right buttons. Since then I've been religiously looking for an alternate that passes the case test but none so far have come to light.
I like the feel of the tempered glass so much that I've resisting going back to the film/plastic alternatives which I had always used in the past. I'm even considering going naked on the screen, relying on Gorilla Glass 5, but continue with a bumper case. Or the reverse, by using an Orzly but with no bumper case as I already have a dBrand skin applied. None of those options seem all that appealing. The one protector that seems to work with a 2.5D screen is the Galaxy 8's Whitestone Dome Glass but it's a crazy expensive $41USD and difficult to apply. I'm not sure even if a OnePlus 5 version was available I'd spend that much money.
I haven't had any luck with any tempered glass., due to point 2 which has been raised:
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
Click to expand...
Click to collapse
After reading all of the reviews I decided just to leave the plastic one on until someone gets their act together and offers a proper tgsp for the OP5
Sent from my OnePlus5 using XDA Labs
Agreed with OP and all of above. I had and still have the Orzly TG protector on, but dust underneath. I want to go back to the usual plastic ones, but don't know which one covers as well/much as the original one that came with the phone. Any recommendations?
Sent from my ONEPLUS A5000 using Tapatalk
Im still waiting for my Nilkin glass protector to arrive (it's almost been a month, sigh)
If this one has the same issue as the ones I've tried before it (lack of adhesive around the edges), I'm going to try and go back to using plastic screen protectors.
I don't want to use my device without one, but I also hate how these glass protectors don't fully adhere to the screen around the sides (including top and bottom)
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Megaflop666 said:
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Click to expand...
Click to collapse
Can anybody confirm this?
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
graja84 said:
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
Click to expand...
Click to collapse
The YouTube channel you mention is also my favorite choice for screen protector info for the Oneplus 5. He always tests the protectors with various cases. His branding of the channel can get annoying but his market coverage is excellent and vast. With the plethora of tempered screen protectors its your choice for an accompanying case that often makes a big difference in your satisfaction. Here is the Big unBox - Biuzko review.
One thing I noticed is when the Big unBox applied the Official OnePlus 5 tgsp video it had lots of bubbles on the edges that he said couldn't be removed while I watched XDA's TK review and his application looked perfect with TK giving it a thumbs up. In the comment section of that review TK said all was well even after a month of usage. I was surprised as the Official tgsp has garnered horrible reviews and comments in the XDA Oneplus 5 accessories section. The most consistent criticism of the Official tgsp is that it cuts off a tiny fraction of the screen. In fact, so far my research indicates all of the "Full Adhesive", "Full coverage" tgsp cut off part of the screen. Personally I think the reason they have a black line on the edges is to hide inevitable bubbles due to the curved edge. The thicker the tempered glass the wider the side black stripes (e.g. Orzly versus Official).
Here is the criteria I'm using in selecting a replacement for my Orzly tgsp and cheap bumper case. Note that I've already installed a dBrand skin so that skews my criteria somewhat.
Tempered Glass screen protector:
- Must have full adhesive (not just top/bottom and side adhesion) and full coverage
- Would prefer, but am a tiny bit flexible on, part of the screen being cut off (limit is that not one pixel of the notification bar's clock is trimmed)
- Must have an oleophobic coating
Case:
- Needs to be as non intrusive as possible adding grip but not greatly ruining the sleekness of the phone
- Uses a minimalist design and/or clear materials so as not to obstruct viewing of the dBrand skin I've installed
- With the case on the buttons (power and volume rocker) must not be difficult to press
So far my research has me leaning towards the Official OnePlus 5 or Biuzko tgsp with a Rhinoshield Crashguard case. My one issue is that the Rhinoshield reviews always mention how difficult the volume rocker buttons are to press. Here is the video that has me leaning in that direction as is seems to best address my criteria
OnePlus 5 best case/protector setup
I'll being doing more reading and searching today hoping to find the unicorn of tgsp/case combinations. The dust under my Orzly is driving me mad but the feel and responsiveness of its surface has me rejecting a film/plastic protector alternative.
I'm using the Biuzko as well with the Tudia MERGE case no problems.
The trick is to first put OP5 in the case, THEN place the screen protector on. It fits perfectly, and you can't mess up the alignment since it falls right in. Then I just try to put pressure on the sticky parts for a few minutes.
I've had no problems for 3 weeks now.
I installed mine the same way, but I'm using the op5 carbon fiber case.
Sent from my ONEPLUS A5000 using Tapatalk
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Hello,
I recommend you the plastic screen protectors from GadgetShieldz. I made a review about it on another post on xda but to summarize, it's a bit difficult to apply but then it's great. The screen looks good and it's cheap ^^ highly recommend.
FYI, I was struggling with TGSP for the OP5 and I just gave up. There is no good alternative atm.
TMSxXDA said:
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
Click to expand...
Click to collapse
Thanks for this, I recently just applied it and noticed all the issues you raised.
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Skinomi makes a wet application protector in both clear and matte. I posted pics of the matte version here. Since that post, I've experienced no scratches or orange peel effect. It's also great for no fingerprints.
You can always get the Nillkin H+ Pro, but only if you are using a spigen case or otterbox. Right now I am using the Spigen Rugged Armor with Nillkin H+ Pro and the gap between the glass and the case is around 1 mm (i would say 1.5 mm if I have to be more accurate). The Otterbox case is even better but I find it too bulky, tried it once for an hour and I did not enjoy it, but some of you may like it.
Few words about the Nillkin H+ Pro.
I know there are few variants of the Nillkin glass and I have tried all of them in the past. In my opinion the best glass is exactly the H+ Pro even tho it is a 1 dollar more expensive. The glass has zero rainbow effect or halo effect, it is 99 to 100% clear. It has amazing orleophobic coating. My Honor 8 has the same glass for 6 months now and it is flawless. I am going to change my nillkin glass with the official 3D tempered glass but only because I received the rhinoshield bumper. Otherwise I would not change my nillkin. You are going to get used to the small gap in a week or so.
Don't leave the phone without a glass.
I just applied mine, best screen protector I ever had, pure quality. Quote me on that
I love the official OnePlus screen protector, it's premium & looks good. Who ever made this thread is straight up wrong. The one he recommended is no Bueno, the glass part doesn't have enhesive. Look I am a OnePlus 5 conisuer, the screen protector is fantastic ?
I have siegen case. Can I buy the original screen protector from oneplus store with no problems? Or can I suggest me something with dust proof and oil proof ?
Hi folk,
With another OnePlus product comes another OnePlus attempt at making a tempered glass screen protector which works for it. Will it be this time that is the magic attempt?
If you dont want to or can't watch the video here are my thoughts:
Yes, they seem to have finally made a tempered glass which fits perfectly on the screen without much cut off. I say much as I think there is still a tiny cut off, but it's nowhere near as noticeable as it was on the 3/3t or 5. If you want to take a look, its on the video at around the 4:04 mark.
The quality is excellent, you can barely feel or see that it's there. There are no sharp edges as the screen tapers off at the edge. It's a full glue screen protector so there is no dot matrix or rainbox effects. You do however have to be fairly careful whilst applying it and taking it off its bed as it feels like it could snap fairly easy if you rush it.
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Let me know if you have any questions.
Jono
Thanks for that, good to know as I ordered one with my 5T.
Hopefully there is a decent bunch of 3rd party ones too.
A spigen tempered glass is my all time favorite screen guard.
niijonodhg said:
Pros:
Good fit
Feels premium
No dot matrix
No rainbox effect
Cons:
Pricey
Could break easily whilst installing
On the pricey mark, if OP have managed to make this perfect this time, I'd expect third party manufacturers to release a similar product soon at a cheaper price. So if you want to wait and do that I wouldn't blame you.
Click to expand...
Click to collapse
Thanks for this. I wanted to know how much it will cut of the screen but its much lesser than earlier.
But i need to disagree something with you. You (and many others) said it was issue etc. on OP3/3T/5 what last TGSP cutted off screen. Well it wasnt really issue or fault on Oneplus side. They needed to choose to have adhesives only on sides and no cut-off or adhesives on fully but had to cut-off. That was because of OP3/3T/5 front glass design where glass started ro bend (2.5D) earlier than usual. Thats why black borders was bigger as otherwise you would get ugly halo's and nobody likes that.
About price. Dont know where you leave but here in Finland 20€ price is nearly cheapest TGSP avaible here. Usually TGSP's here costs around 25-50€ depending of phone model so 20€ is more than just normal price for us. So okay maybe its little pricey compared ro your country but on many others it isnt.
This is my first OP device so I know nothing about past issues, but this is by far the best fitting, best sealing TGSP I have ever installed. Typically with screen protectors the edges do not want to seal/stick but the squeegee made quick work of getting all the bubbles out. There are a few pieces of inevitable lint but not one single bubble.
It does cut a tiny bit of the screen off which gives a weird depth to the screens appearance so for that I give it 9/10. If it was totally clear or just had the black at the top and bottom it would be 10/10 for sure.
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I'm using the original one and is perfect with the original case/Bumper.
Mine is not so perfect and the screen is slightly cover on the edge. is not a huge problem, but is noticeble if you see the phone from a side.
in any case is far better than the original plastic protector and perfect with a case.
DeathStroke said:
Is it possible to use tpu case along with this 3d tempered glass?
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
niijonodhg said:
It works with all the official cases you can get from OnePlus and I see no reason to why it wouldn't work with a standard TPU. Will let you know more when I get some cases.
Click to expand...
Click to collapse
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
DeathStroke said:
Because of edge alignment, it doesn't work on the OP5, so I'll order only if it's going to work with tpu case i got.
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
Which case do you have?
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
Honestly, I haven't noticed.
niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
The one that came in the box. I want to order a 3d tempered glass and a premium case so that they can work together. Looking yet for a compatible combo.
Sent from my ONEPLUS A5010 using Tapatalk
niijonodhg said:
Which case do you have?
Honestly, I haven't noticed.
Click to expand...
Click to collapse
I just removed the protector to see how the screen looks naked. The "grainy-ness" is gone. I also noticed a potential problem with the protector. The adhesive doesn't go all the way to the top or bottom of the protector, so when I removed it I found a lot of dust stuck to the top and bottom bezel of the phone. This could cause scratches. Even though the scratches would not be on the display, I don't want scratches anywhere on the glass. If I keep this phone I'll try an IQshield.
With the bubbles settling behind, a lot of little dust has been captured.
I also notice grainy-ness. I'm likely going to ditch it and just go naked...
I just got my for 10€. And yes, it still crops a bit from both sides but not like OP3/3T/5. And yes, there is grainy-ness as stated above. You cant notice on black background but on white yes.
I bought the '5T full scratch protection' bundle with my phone. I have an unopened "3D Tempered Glass Screen Protector" and an opened (but unused) "Sandstone Protective Case". My plan was going to be to use the case until Spigen comes out with a 5T case, but I just decided to rock the case that came with my 5T instead.
lyall29 said:
Does anyone notice that the display looks a little grainy with the OnePlus tempered glass? I haven't used the phone without the protector, so I'm not too sure if it's the protector or the display that is a little grainy.
Click to expand...
Click to collapse
To be frank I wouldn't have noticed the grainy screen till I read your comment. But now that I've read it.... The screen protector does induce the grainy effect. It's a perfect fit imho, though it definitely does give out that grainy effect. I'm guessing I'll stop noticing it in a couple of days time.
I had an extra IQshield (wet apply) protector for a Pixel 2 XL. I cut a little off the top and it fit fine. I must say, the IQshield is very clear, no grainy screen for me.
I have to put my 2 cents in on this. The official tempered glass is pretty great. I had no issue installing, it stayed in place, zero bubble at all, and feels great. using it with the official sandstone case.
Who else are OCD like me that can't use glass protector because no matter what brand/thickness out there the glass screen collects dust around the edges of the protector? In search for plastic screen protector film, not glass. The stock one lifts all around the edges, Any good plastic screen protector out there?
I think Nillkin screen protector film (matte or clear) would be one of best options.
http://nillkin.org/smartphones-accessories/oneplus-accessories/oneplus-5t-accessories/
PhantomSkinz Guru said:
We've got the best (a little biased) non-glass screen protection around. Our Ultra Clear film is very smooth to the touch, yet adds grip when carrying the phone. They're also self-healing so you never get those annoying micro scratches from dust/sand in your pockets. They cover virtually the entire front glass and have full adhesive with zero halo. Our material is also inherently (anti-fingerprint), so there is no oleophobic coating that wears off over time and the screen is always easy to clean with a simple wipe on the shirt. They're also made in the USA and come with our Lifetime Warranty :good:
Send us a DM if you'd like to try one out in exchange for a review We offer full body skinz as well. https://phantomskinz.com/oneplus-5t/. Check out our demo video to see the stuff in action
-Guru
Click to expand...
Click to collapse
Yeah, your product seems good as per a review from https://forum.xda-developers.com/oneplus-5t/accessories/phantomskinz-5t-t3733833 but it looks like the shipping kills it for us located in Asia.
Has anyone else encountered any good film protectors (not tempered glass)? Oddly enough OnePlus doesn't sell the same one that came preinstalled on the phone, which I really like!
TaTaTaing said:
Has anyone else encountered any good film protectors (not tempered glass)? Oddly enough OnePlus doesn't sell the same one that came preinstalled on the phone, which I really like!
Click to expand...
Click to collapse
I'm done with the glass protectors all have there problems I just ordered this film
http://s.aliexpress.com/fq2IrIRv?fromSns
Verstuurd vanaf mijn ONEPLUS A5010 met Tapatalk
moneyvirus said:
I'm done with the glass protectors all have there problems I just ordered this film
http://s.aliexpress.com/fq2IrIRv?fromSns
Verstuurd vanaf mijn ONEPLUS A5010 met Tapatalk
Click to expand...
Click to collapse
Does it fit as well as the standard one from OnePlus?
jesper801 said:
Does it fit as well as the standard one from OnePlus?
Click to expand...
Click to collapse
Dunno yet just Ordered it and with the cny it will take a while when I received it will post
Verstuurd vanaf mijn ONEPLUS A5010 met Tapatalk
t0rmenti0n said:
Yeah, your product seems good as per a review from https://forum.xda-developers.com/oneplus-5t/accessories/phantomskinz-5t-t3733833 but it looks like the shipping kills it for us located in Asia.
Click to expand...
Click to collapse
I got the Nillkin one which came free with their Frosted case. Not so good...it already has a hairline scratch. But still better than the one that came with the OP5T.
Ringke also provides a film protector.
Both are Nillkin and Ringke products available at the St. Francis mall in Ortigas. (not sure if they can deliver to Batangas though)
did anyone get to test the PhantomSkinz one, I want the closest thing to the original OP with the same fit.
moneyvirus said:
Dunno yet just Ordered it and with the cny it will take a while when I received it will post
Verstuurd vanaf mijn ONEPLUS A5010 met Tapatalk
Click to expand...
Click to collapse
Tell us how it goes please. :highfive:
Just recieved one but... They sended me The one for the oneplus 5..... So back in chat with them...
And waiting again
Verstuurd vanaf mijn ONEPLUS A5010 met Tapatalk
I bought ultimate shield film screen protector, which is good, but there is some minor issues (minor for me, but some users could be more worried)
There is slight lifting issue, likely from installation mistake I made. My microfiber cloth get so wet that i wiped with paper from sides at the end. That might have caused some dust to stick to there.
It has slight orange/yellow tint, but I didn't notice it before someone else mentioned this. It looks slightly grainy or very slight rainbow effect. These issues seems way worst on written format that they are in use and I am very easily annoyed from slight imperfections.
I have been using this one for over two months now and it's still in good condition. I would rate it maby 3,5/5
I ordered CHYI screen protector film for my OnePlus 3t and that is very good. It seems much better than ultimate shields protector. Brighter, clearer, easier to install, dry install and sticks better.
I ordered one for this OnePlus 5t, but it hasn't arrived yet. I have very high hopes for it, but here is a sample from my 3T.
https://imgur.com/a/IVArw
Skinomi screen protector.
https://www.amazon.com/gp/aw/d/B077...oneplus+5t&dpPl=1&dpID=51N+TN1lBpL&ref=plSrch
Did the wet install last night since it was recommended you let it sit overnight to fully dry and cure. So far, it's AMAZING. Fully covers the screen instead of only partially like all the rest of the screen protectors out there, and it feels great. Definitely a good purchase.
Sent from my ONEPLUS A5010 using Tapatalk
Prefer Screen protector over tempered glass anyday
I never used tempered glass, until one I bought/used one on Oneplus 5T. What a terrible mistake.
Its dust, fingerprint magnet. On first fall, just came off like it never glued! Damn.
I went back to trusted Screen Guard from GadgetShieldz. They are pricey, but well worth the every penny.
I am using their screen guard/full body guard since Nexus S days.
I usually prefer Ultra Clear over Matt. Once I used Matt on Nexus 6, I didn't like a bit.
So, to summarize, considering delivery to Europe and price in euros:
skinomi: 16,64€
phantom skinz: 22,79€ (they send two protectors)
gadget shieldz: 6,52€
There is quite a difference... I think I'll try the cheapest one and see how it goes.
Quinlu said:
So, to summarize, considering delivery to Europe and price in euros:
skinomi: 16,64€
phantom skinz: 22,79€ (they send two protectors)
gadget shieldz: 6,52€
There is quite a difference... I think I'll try the cheapest one and see how it goes.
Click to expand...
Click to collapse
CHYI from AliExpress is 3.12€ including delivery and includes two screen protectors. Still don't have my 5t version, but 3t version is stellar quality.
http://s.aliexpress.com/BBFFJJZJ?fromSns
hannki said:
CHYI from AliExpress is 3.12€ including delivery and includes two screen protectors. Still don't have my 5t version, but 3t version is stellar quality.
Click to expand...
Click to collapse
Thank you mate
Ordered
After 2 unnecessary glass protectors, I use this one now. Pretty nice, protects full screen and bubble free.
https://www.amazon.de/dp/B06XYRGJPX/ref=cm_sw_r_em_apa_ER-VAb9TKMPB8
hannki said:
CHYI from AliExpress is 3.12€ including delivery and includes two screen protectors. Still don't have my 5t version, but 3t version is stellar quality.
http://s.aliexpress.com/BBFFJJZJ?fromSns
Click to expand...
Click to collapse
Please update when you get it if that protector is compatible with cases. My tempered glass I got for Christmas is cracked now and I'm tired of glass protectors. Wishing I kept the stock protector on because it fit with every case and was good quality.
vekenti said:
Please update when you get it if that protector is compatible with cases. My tempered glass I got for Christmas is cracked now and I'm tired of glass protectors. Wishing I kept the stock protector on because it fit with every case and was good quality.
Click to expand...
Click to collapse
Just ordered this protector. Looks promising. I've tried like 4 protectors before, but sadly, it was bad experience.
Looks like the one that comes preinstalled from factory is the best. My bad that I've removed it after like 1 week.
I will post here some of my thoughts when it arrives :angel:
I have purchased many so called "perfect" Tempered Glass Screen Protectors for the Mi Mix 2/2s and threw most of them away for poor adhesive, halo and rainbow affect, and visibility issues. I finally ordered the NILLKIN CP+ Anti-Explosion Glass Screen Protector for Xiaomi Mi Mix 2/2S from OppoMart https://www.oppomart.com/xiaomi/mi-...-screen-protector-for-xiaomi-mi-mix-2-2s.html
Black border, no thanks.
foremi said:
Black border, no thanks.
Click to expand...
Click to collapse
Agreed!!
foremi said:
Black border, no thanks.
Click to expand...
Click to collapse
the border is a guide and ensure it is case friendly - but to each their own and halo
No Halo effect (like the black bordered screen protector that I had for my old Mi Mix) with these 5D black border screen protector for my Mi Mix 2s
https://www.aliexpress.com/item/Hat...025.html?spm=a2g0s.9042311.0.0.38294c4dX7C8zr
It is like a non black bordered screen protector, and not at all like the one I had that was a black bordered screen protector for the Mi Mix.
The Halo effect is caused by the adhesive pad that is used around the black border part of the screen protector, and as such, the screen protector floats over the phone's screen, creating the halo or rainbow effect.
The black border screen protector I received this week does not have this adhesive on the underside of the black border, and as such, the entire underneath surface of the screen protector sits in direct contact with the phone screen and hence does not hover or float on the phones screen. This type of installation is like any other screen protector that just bonds to the phone's screen, thereby eliminating the halo effect.
MUCH easier to align than an undersized non black bordered screen protector.
Cheers,
LormaD
andril said:
I have purchased many so called "perfect" Tempered Glass Screen Protectors for the Mi Mix 2/2s and threw most of them away for poor adhesive, halo and rainbow affect, and visibility issues. I finally ordered the NILLKIN CP+ Anti-Explosion Glass Screen Protector for Xiaomi Mi Mix 2/2S from OppoMart https://www.oppomart.com/xiaomi/mi-...-screen-protector-for-xiaomi-mi-mix-2-2s.html
Click to expand...
Click to collapse
Had this one. The adhesion is very nice, however the camera and sensor cutouts on the bottom chin have no adhesive on the glass and have the tendency to collect a lot of dust from eg. having the phone in my pocket. Had to tear it off, because my front camera became very foggy and not sharp from all this dust
Lol 5d. What does that even mean, I get 3d signifies it curves. Time to release a 6d superior screen protector
ArctiX said:
Had this one. The adhesion is very nice, however the camera and sensor cutouts on the bottom chin have no adhesive on the glass and have the tendency to collect a lot of dust from eg. having the phone in my pocket. Had to tear it off, because my front camera became very foggy and not sharp from all this dust
Click to expand...
Click to collapse
After your post I actually noticed this hopefully they will do a all clear version
andril said:
After your post I actually noticed this hopefully they will do a all clear version
Click to expand...
Click to collapse
There actually is a clear version http://s.aliexpress.com/AJFRbQfI
It's called "amazing h+ pro", but I haven't tested it.
Just ordered a cheap one from ebay for 4€ and it's bad as expected.
So the nillkin is not good at all? My mi5 nillkin screen protector was awesome!
So which one should I buy?
i use this one and i am very satisfied... it's fit perfectly
purchased with phone on honorbuy
Can you share the link please
Sent from my Nexus 5 using XDA-Developers Legacy app
dahndahnbo said:
Can you share the link please
Sent from my Nexus 5 using XDA-Developers Legacy app
Click to expand...
Click to collapse
https://www.honorbuy.com/1228-full-...-screen-protector-for-xiaomi-mi-mix-2-2s.html
Thanks for your reply
Sent from my Nexus 5 using XDA-Developers Legacy app
ArctiX said:
There actually is a clear version http://s.aliexpress.com/AJFRbQfI
It's called "amazing h+ pro", but I haven't tested it.
Click to expand...
Click to collapse
I'm using this now, it is cheaper, but it not cover fully like the black border version.
zechs88 said:
I'm using this now, it is cheaper, but it not cover fully like the black border version.
Click to expand...
Click to collapse
Using this too.
Actually, i had the choice to get the one with the black border (that covers everything) and this one. But i still chose this because its nilkin, and its a trusted brand.
vince_junior said:
Using this too.
Actually, i had the choice to get the one with the black border (that covers everything) and this one. But i still chose this because its nilkin, and its a trusted brand.
Click to expand...
Click to collapse
Nillkin have the black border version too, named CP+
based on some user feedback, i believe it using hybrid materials, which screen area is still glass but black border is plastic like material, bendable
Hy
i have this more than 1 week... and it´s perfect fit to the screen sice...
https://tradingshenzhen.com/de/displayschutz/1272-xiaomi-mimix2s-nillkintg.html
hofi01 said:
Hy
i have this more than 1 week... and it´s perfect fit to the screen sice...
https://tradingshenzhen.com/de/displayschutz/1272-xiaomi-mimix2s-nillkintg.html
Click to expand...
Click to collapse
Any way you could picture it on the phone?
This one came in from Aliexpress Friday and it fits perfectly.
https://goo.gl/oaycHM
It's has full screen adhesive and there is a very thin black border, wasn't hard to line up, but that border has a lot thicker adhesive on it so its stuck to the curved edges of the glass really good.
Couldn't beat it for the price.
With case on
https://drive.google.com/file/d/1LBrEKrWmbCRgvWUTIqG7xnHIuB6yyV5t/view?usp=sharing
Case off closeup
https://drive.google.com/file/d/1GnQh7SVCxEllCpSOq3kBdOXQkaRoGMDX/view?usp=sharing
Screen on
https://drive.google.com/file/d/1-Dea11pedpUjtRkItdxBm9T2FgI06swY/view?usp=sharing