Current State
Huawei P10, Model VTR-L09BC02B374
Can boot to fastboot
Bootloader unlocked
Cannot boot to recovery (even after flashing a previously working TWRP image)
Shows
ERROR MODE
Attention! Please update device again
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
TWRP image found at https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-oreo-t3777582
Neither the above image, or https://forum.xda-developers.com/p10-plus/development/recovery-twrp-3-2-1-0-oreo-t3734993 work, and had both been tested to work on this device pre-brick
Cannot boot to system (shows same screen/message)
Cannot boot to eRecovery
Cannot boot to firmware updater (Power + Vol Up + Vol Down)
Shows:
Your device has been unlocked and can't be trusted.
To learn more, visit: zh.ui.vmail. com/emotiondownload.php?mod=restore Prepend htttp://, no space - link not in full as outside links not allowed
Your device is booting now...
Then, after a few seconds, restarts
Shows above screen again, indefinitely
How it Got There
Would not boot, had above TWRP image flashed and working (ADB working also). Followed this guide https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 with the appropriate firmware zips (again, can't link those, but I believe they're correct).
The manual update package was Base + Linux + P10. The hwota.sh file in the guide was edited to comment out the TWRP installation that was part of it (it didn't work, even after changing the targeted partition to recovery_ramdisk instead of ramdisk).
The goof was that I initially actually ran Same brand update first instead of rebrand. Gosh darn rebrand is the second option instead of the first.
I've had a shot at using Huawei Multitool's "unbrick" option to unbrick it, but no dice. Does anyone have any clue where to go from here?
OctarineSorcerer said:
Current State
Huawei P10, Model VTR-L09BC02B374
Can boot to fastboot
Bootloader unlocked
Cannot boot to recovery (even after flashing a previously working TWRP image)
Shows
ERROR MODE
Attention! Please update device again
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
TWRP image found at https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-oreo-t3777582
Neither the above image, or https://forum.xda-developers.com/p10-plus/development/recovery-twrp-3-2-1-0-oreo-t3734993 work, and had both been tested to work on this device pre-brick
Cannot boot to system (shows same screen/message)
Cannot boot to eRecovery
Cannot boot to firmware updater (Power + Vol Up + Vol Down)
Shows:
Your device has been unlocked and can't be trusted.
To learn more, visit: zh.ui.vmail. com/emotiondownload.php?mod=restore Prepend htttp://, no space - link not in full as outside links not allowed
Your device is booting now...
Then, after a few seconds, restarts
Shows above screen again, indefinitely
How it Got There
Would not boot, had above TWRP image flashed and working (ADB working also). Followed this guide https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 with the appropriate firmware zips (again, can't link those, but I believe they're correct).
The manual update package was Base + Linux + P10. The hwota.sh file in the guide was edited to comment out the TWRP installation that was part of it (it didn't work, even after changing the targeted partition to recovery_ramdisk instead of ramdisk).
The goof was that I initially actually ran Same brand update first instead of rebrand. Gosh darn rebrand is the second option instead of the first.
I've had a shot at using Huawei Multitool's "unbrick" option to unbrick it, but no dice. Does anyone have any clue where to go from here?
Click to expand...
Click to collapse
I think we have the same problem and I have no clue how to proceed to recovery mode. I've made a thread with images.
enter fastboot
fastboot flash system system.img
reboot
OK
I Have exactly same problem, does anyone know how to fix it please ?
Same here
What I did was unlock it, get TWRP on it and then flashed PixelExperience GSI onto it.
Since our issue is exactly the same (although the way we got there is different), on one of the flashes i tried running
Code:
adb reboot "dm-verity permissive"
and it did let me boot once, but it never boots again.
Not only that, i suspect the whole system partition is encrypted too.
Could someone experienced make a GSI flashing tutorial that the phone actually survives?
No solution?
Flash kernel.img? Worth trying
I have that error if I try to enter in TWPR but I can boot in eRecovery and the smartphone turns on and works normally.
Someone could say more about this?
OctarineSorcerer said:
Current State
Huawei P10, Model VTR-L09BC02B374
Can boot to fastboot
Bootloader unlocked
Cannot boot to recovery (even after flashing a previously working TWRP image)
Shows
ERROR MODE
Attention! Please update device again
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
TWRP image found at https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-oreo-t3777582
Neither the above image, or https://forum.xda-developers.com/p10-plus/development/recovery-twrp-3-2-1-0-oreo-t3734993 work, and had both been tested to work on this device pre-brick
Cannot boot to system (shows same screen/message)
Cannot boot to eRecovery
Cannot boot to firmware updater (Power + Vol Up + Vol Down)
Shows:
Your device has been unlocked and can't be trusted.
To learn more, visit: zh.ui.vmail. com/emotiondownload.php?mod=restore Prepend htttp://, no space - link not in full as outside links not allowed
Your device is booting now...
Then, after a few seconds, restarts
Shows above screen again, indefinitely
How it Got There
Would not boot, had above TWRP image flashed and working (ADB working also). Followed this guide https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 with the appropriate firmware zips (again, can't link those, but I believe they're correct).
The manual update package was Base + Linux + P10. The hwota.sh file in the guide was edited to comment out the TWRP installation that was part of it (it didn't work, even after changing the targeted partition to recovery_ramdisk instead of ramdisk).
The goof was that I initially actually ran Same brand update first instead of rebrand. Gosh darn rebrand is the second option instead of the first.
I've had a shot at using Huawei Multitool's "unbrick" option to unbrick it, but no dice. Does anyone have any clue where to go from here?
Click to expand...
Click to collapse
did you manage to fix it?
I'm in the same boat with my p10 plus: no recovery or erecovery, can't boot upgrade, only options are flash or bootloop when booting into system.
gonzalomorenorovetto said:
did you manage to fix it?
I'm in the same boat with my p10 plus: no recovery or erecovery, can't boot upgrade, only options are flash or bootloop when booting into system.
Click to expand...
Click to collapse
Hey, sorry to all for not being on here for so long! I'm afraid I've not found a solution myself. It was with a friend's phone, and he ended up opting to get a new one. We didn't manage to fix it in that time, and it's not around anymore to try new things on.
So apologies for not being able to provide a solution, but I hope the details let people find a solution at some point!
Hello I have a VTR-L09 (Australian) with stock Pie on it. I unlocked the bootloader with the code from Huawei. Then I installed the openkirin AOSP 10 Preview 2 on it which led me to not being to connect to the internet and only occasionally being able to make calls, so that was junk...
Then I tried to install TWRP and FutureROM, but something must have gone wrong (pos user error) and now I can't even use the erecovery as it, after getting the last firmware, throws a "can't verify" error. I since tried to install TWRP via fastboot, but even though it reports success, when I try to boot into TWRP recovery all I get is a screen similar to the fastboot screen only with the below message
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
When I try to boot iut just gets me to the FASTBOOT&RESCUE MODE screen
Is the phone bricked? Where to from here to get it back on stock ROM?
Thank you kindly!!!
Perhaps the device cannot verify the recovery image.
If bootloader is still unlocked, try to flash stock recovery and see what happens.
Good people, I am Mexico and I am translating by google today I had the opportunity to unlock the bootloader to my p10 lite WAS-LX3 8.0.0,360 (C212) which was successful but when installing the recobery it sent me this error code when entering but if I can turn on the normal phone
11 (recovery image)
Error NO: 2 (load failed)
They would help me is that I want to install root and the viper audio I thank you
I tried to root my realme x2 pro using magisk. i patched boot.img and flashed via fastboot ( i was on latest update from realme ui2.0
RMX1931EX _11 _ F.12).
after booting into system all the google service crashed all service stopped and there were no google account on phone play store stopped working.
so i decided to re flash my device from begening and i wiped data from realme stock recovery and boot into fastboot and flashed system,vendor,boot,dtbo,vbmeta images and i reboot my phone.
From that moment my device is looping into bootloader.
I cant boot on any custom recovery, because it loops back into bootloader
If i flash stock recovery and boot into recovery, full white screen appears and my device stuck there.
In bootloader it says device state unlocked and secure boot yes. is this secure boot thing is creating this problem? or the latest patch of my system. I found that i cant flash custom recovery on realme ui 2.0 after bricking my phone.
REALME FLASH TOOL "CANNOT FIND CENTRAL DIRECTORY" ERROR
MSM TOOL, DONT HAVE USERNAME PASSWORD
QFIL TOOL (i used extracted ofp files in qfil tool)
2021-09-08 19:19:27.687 19:19:27: INFO: TARGET SAID: 'ERROR: Verifying signature failed with 3'
2021-09-08 19:19:27.687
2021-09-08 19:19:27.687 19:19:27: INFO: TARGET SAID: 'ERROR: Authentication of signed hash failed 0'
literally im pissed right now DO SOMETHING ENTHUSIAST
"Please help me to unbrick my phone. THANKYOU."
HELP PLEASE
PETER.PARKER said:
I tried to root my realme x2 pro using magisk. i patched boot.img and flashed via fastboot ( i was on latest update from realme ui2.0
RMX1931EX _11 _ F.12).
after booting into system all the google service crashed all service stopped and there were no google account on phone play store stopped working.
so i decided to re flash my device from begening and i wiped data from realme stock recovery and boot into fastboot and flashed system,vendor,boot,dtbo,vbmeta images and i reboot my phone.
From that moment my device is looping into bootloader.
I cant boot on any custom recovery, because it loops back into bootloader
If i flash stock recovery and boot into recovery, full white screen appears and my device stuck there.
In bootloader it says device state unlocked and secure boot yes. is this secure boot thing is creating this problem? or the latest patch of my system. I found that i cant flash custom recovery on realme ui 2.0 after bricking my phone.
REALME FLASH TOOL "CANNOT FIND CENTRAL DIRECTORY" ERROR
MSM TOOL, DONT HAVE USERNAME PASSWORD
QFIL TOOL (i used extracted ofp files in qfil tool)
2021-09-08 19:19:27.687 19:19:27: INFO: TARGET SAID: 'ERROR: Verifying signature failed with 3'
2021-09-08 19:19:27.687
2021-09-08 19:19:27.687 19:19:27: INFO: TARGET SAID: 'ERROR: Authentication of signed hash failed 0'
literally im pissed right now DO SOMETHING ENTHUSIAST
"Please help me to unbrick my phone. THANKYOU."
Click to expand...
Click to collapse
bro i have exact same issue with my Realme 3 pro
it was on Realme ui 2.0 and i flashed custom recovery from that stage it is stuck in fastboot/bootloader mode.
i also tried REALME FLASH TOOL but it showed me the same error as you got "CANNOT FIND CENTRAL DIRECTORY" error.
i have tried all the possible ways to unbrick it but it again boots back into bootloader
IT IS STUCK AND REBOOTING AGAIN AND AGAIN INTO BOOTLOADER
PLEASE HELP ME IF YOU GOT A SOLUTION PLEASE CONTACT
THANK YOU
Darshit16 said:
bro i have exact same issue with my Realme 3 pro
it was on Realme ui 2.0 and i flashed custom recovery from that stage it is stuck in fastboot/bootloader mode.
i also tried REALME FLASH TOOL but it showed me the same error as you got "CANNOT FIND CENTRAL DIRECTORY" error.
i have tried all the possible ways to unbrick it but it again boots back into bootloader
IT IS STUCK AND REBOOTING AGAIN AND AGAIN INTO BOOTLOADER
PLEASE HELP ME IF YOU GOT A SOLUTION PLEASE CONTACT
THANK YOU
Click to expand...
Click to collapse
SAME PROBLEM
I Tried Flashing TWRP in my realme 3 pro but it started boot looping.... I tried flashing stock recovery and vbmeta file so now my phone is bricked and it shows (as shown in picture)
Also tried realme flash tool but it shows "CANNOT FIND CENTEAL DIRECTORY"
Darshit16 said:
bro i have exact same issue with my Realme 3 pro
it was on Realme ui 2.0 and i flashed custom recovery from that stage it is stuck in fastboot/bootloader mode.
i also tried REALME FLASH TOOL but it showed me the same error as you got "CANNOT FIND CENTRAL DIRECTORY" error.
i have tried all the possible ways to unbrick it but it again boots back into bootloader
IT IS STUCK AND REBOOTING AGAIN AND AGAIN INTO BOOTLOADER
PLEASE HELP ME IF YOU GOT A SOLUTION PLEASE CONTACT
THANK YOU
Click to expand...
Click to collapse
Is there any solution here, I landed to this problem here
rizwanp880 said:
Is there any solution here, I landed to this problem here
Click to expand...
Click to collapse
Nah bruh still nothing i visited service centre twice and they said it's motherboard issue you need to change the whole motherboard which costs approx 4000 INR.
Who would do that it's just a software problem and also i found out that if device bootloader is locked then there is only 1 tool which can make it work again that is MSM TOOL and for that we need to do that outside in shop or somewhere, you can't flash at home as it needs user id & password and that we don't have, they charge like 800 to 900 INR.
I also tried the crack version of this tool but it doesn't detect the phone and doesn't work.
rizwanp880 said:
Is there any solution here, I landed to this problem here
Click to expand...
Click to collapse
text me on WhatsApp i can help +917889751393
Darshit16 said:
Nah bruh still nothing i visited service centre twice and they said it's motherboard issue you need to change the whole motherboard which costs approx 4000 INR.
Who would do that it's just a software problem and also i found out that if device bootloader is locked then there is only 1 tool which can make it work again that is MSM TOOL and for that we need to do that outside in shop or somewhere, you can't flash at home as it needs user id & password and that we don't have, they charge like 800 to 900 INR.
I also tried the crack version of this tool but it doesn't detect the phone and doesn't work.
Click to expand...
Click to collapse
You can visit Realme Service Centre and ask them to flash the software they'll charge you around 177 to 200 INR and your phone will be flashed.
Hey everyone,
after spending about 5 hours trying everything I could think of and what I found in all kinds of forums, I'll try here before the phone is gonna be burried.
Got a "dead" P10 from a friend - booted straight to an error page with the headline "Your device has failed verification and may not work properly." My guess is that it was supposed to be updated, didn't have enough memory and then crashed.
Here's what I tried:
Factory reset - aborts at about 25%.
Download of a new firmware version via WLAN - aborts
Upload via SD-Card (dload) - firmware update failed
The phone is not recognized on the PC - so wouldn't know how to flash it from there.
I can still access it via fastboot, but I actually don't now how that could help me
Can anyone think of anything else that could be done?
LG
Maxi
Somebody got any idea?