Please i cant update m7 sprint after downloading the ota uodate it shows error and
Finding update package...
Opening update package...
Verifying update package...
Installing update...
assert failed: file_getprop("/system/build.prop", "ro.aa.taskid")== "385463" ||file_getprop("/system/build.prop", "ro.aa.taskid") =="398306"Installation aborted.Write host_mode:0 done
musa92167 said:
Please i cant update m7 sprint after downloading the ota uodate it shows error and...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/htc-one
With that stated...
You should be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=2305490
If all else fails, and you are unable to obtain any support from the above thread, your next best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=2180425
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Related
Phone Info:
-M7_UL
-S -OFF
- CID _044
-HBoot -1.55
-Radio -4A.21.3263.04
- OS -3.36.707.3
I used HTC1Guru Reset with M7 3.36.707.4 to get the OTA update since I was initially rooted.
I get the OTA 4.4.2 update which downloads to the phone and goes into recovery then it aborts with an error below
"System/app/Help Tips" Unexpected content.
I have done a factory reset, but still get the same error after countless times of trying to get the update done.
I have also tried flashing the OTA zip file manually and no success.
Any ideas to get this fixed would be highly appreciated.
Thanks!
Do you have stock recovery? If not. Extract from OTA you are trying to apply and flash it. Then do ota update again. You will need to unlock bootloader to flash recovery and then lock it back before applying ota
sent from my mobile device
SaHiLzZ said:
Do you have stock recovery? If not. Extract from OTA you are trying to apply and flash it. Then do ota update again. You will need to unlock bootloader to flash recovery and then lock it back before applying ota
sent from my mobile device
Click to expand...
Click to collapse
hey @SaHiLzZ, no need to lock/relock/unlock bootloader with S-Off.
at OP, are you getting an assert failed on whatever it file it is? --> file is not stock! OTA will not work, unless all files it checks (a couple of thousand) are all 100% what it expects.
you can take a look at the updater script to see what it does check.
nkk71 said:
hey @SaHiLzZ, no need to lock/relock/unlock bootloader with S-Off.
at OP, are you getting an assert failed on whatever it file it is? --> file is not stock! OTA will not work, unless all files it checks (a couple of thousand) are all 100% what it expects.
you can take a look at the updater script to see what it does check.
Click to expand...
Click to collapse
No...That's all it says, no specific file information or details. It just says aborted after that.
nkk71 said:
hey @SaHiLzZ, no need to lock/relock/unlock bootloader with S-Off.
at OP, are you getting an assert failed on whatever it file it is? --> file is not stock! OTA will not work, unless all files it checks (a couple of thousand) are all 100% what it expects.
you can take a look at the updater script to see what it does check.
Click to expand...
Click to collapse
Ah yes, I missed that. Thanks for correction @nkk71
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
Xbambobee said:
No...That's all it says, no specific file information or details. It just says aborted after that.
Click to expand...
Click to collapse
Do you have stock recovery
SaHiLzZ said:
Ah yes, I missed that. Thanks for correction @nkk71
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
Do you have stock recovery
Click to expand...
Click to collapse
I had stock recovery before. However, I used the HTC1Guru reset for the 2.707.xx which switched the phone back to 4.2.2 then got an OTA update for 4.3 after that the 4.4.2 OTA update kicked in successfully....Yay.!!!
But I must say the HTC One is such a pain and a finicky device.
Any help please...
I can not restore my backup
I was testing a ROM (LiquidSmooth) and when I installed a different Kernel (Faux123) the cellphone never started,
Then I made a wipe, but never crossed the "Application update."
Then I reistalled the ROM but nothing happen and now when try to restore my last backup .. I get the lines:
E: Error opening '/data/misc/wifi/wpa_supplicant'
E: Error opening '/data/ssh/empty'
E: Error opening '/data/lost+found'
E: Error opening '/data/hostapd'
E: Error opening '/data/time'
Done
And the restoring process fail
So, then i tried installing its original firmware but a RED warning appear
Downgraded security version
update gpt_main version failed
preflash validation failed for gpt
so, I believe this will brick my phoen
I have an Unlocked XT1058
and my last ROM was Project X V3 Android .4.4.2
gueszman said:
Any help please...
I can not restore my backup
I was testing a ROM (LiquidSmooth) and when I installed a different Kernel (Faux123) the cellphone never started,
Then I made a wipe, but never crossed the "Application update."
Then I reistalled the ROM but nothing happen and now when try to restore my last backup .. I get the lines:
E: Error opening '/data/misc/wifi/wpa_supplicant'
E: Error opening '/data/ssh/empty'
E: Error opening '/data/lost+found'
E: Error opening '/data/hostapd'
E: Error opening '/data/time'
Done
And the restoring process fail
So, then i tried installing its original firmware but a RED warning appear
Downgraded security version
update gpt_main version failed
preflash validation failed for gpt
so, I believe this will brick my phoen
I have an Unlocked XT1058
and my last ROM was Project X V3 Android .4.4.2
Click to expand...
Click to collapse
It appears you tried to flash a pre-4.4.2 SBF to your phone... It is stated multiple places throughout the forum that you can NOT downgrade to any version prior to 4.4.2 once on 4.4.2
You say you flashed the 'original firmware' - I take that to mean you flashed a 4.2.2 or 4.4 SBF?
You should -try- to SBF back to stock by following the manual method in the Return to Stock thead: http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Use the 4.4.2 SBF for your carrier/model. As long as you can use fastboot, we can -probably- get you fixed up.
If you can't get that to work, you may try your luck at the methods listed in the "Resurrecting a Bricked Moto X" Thread: http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Good Luck
samwathegreat said:
It appears you tried to flash a pre-4.4.2 SBF to your phone... It is stated multiple places throughout the forum that you can NOT downgrade to any version prior to 4.4.2 once on 4.4.2
You say you flashed the 'original firmware' - I take that to mean you flashed a 4.2.2 or 4.4 SBF?
You should -try- to SBF back to stock by following the manual method in the Return to Stock thead: http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Use the 4.4.2 SBF for your carrier/model. As long as you can use fastboot, we can -probably- get you fixed up.
If you can't get that to work, you may try your luck at the methods listed in the "Resurrecting a Bricked Moto X" Thread: http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Good Luck
Click to expand...
Click to collapse
Thank you so much,
My error was trying to flash a lower version of my Firmware.
I appreciate your help
:good:
Hello all, having issues applying an OTA update. I've put all my phone information below. I also want to update to 5.1, so if anyone could help with that too itd be great.
Thanks!
Phone:
Rooted
Unlocked Bootloader
CWM recovery isntalled
Moto X (1st gen)
Android 4.4.4
System Version: 212.44.26.ghost_row.RCI.en.CA
update is for system version 212.144.12.en.ca
clockworkmod recovery v6.0.4.8
e: invalid argument
finding update package
opening update package
verifying update package
e:failed to verify whole-file signature
e:signature verification failed
installing update
assert failed: getprop("ro.product.device") =="
ghost" || getprop("ro.build.product") =="
ghost" || getprop("ro.product.device") ==
"ghost || getprop("rp.build.product") ==
"ghost"
e:error in /cache/blur_version .212.44.26.ghost_row.rci.en.ca.zip
status 7
instillation aborted
21q said:
Hello all, having issues applying an OTA update. I've put all my phone information below. I also want to update to 5.1, so if anyone could help with that too itd be great.
Thanks!
Phone:
Rooted
Unlocked Bootloader
CWM recovery isntalled
Moto X (1st gen)
Android 4.4.4
System Version: 212.44.26.ghost_row.RCI.en.CA
update is for system version 212.144.12.en.ca
clockworkmod recovery v6.0.4.8
e: invalid argument
finding update package
opening update package
verifying update package
e:failed to verify whole-file signature
e:signature verification failed
installing update
assert failed: getprop("ro.product.device") =="
ghost" || getprop("ro.build.product") =="
ghost" || getprop("ro.product.device") ==
"ghost || getprop("rp.build.product") ==
"ghost"
e:error in /cache/blur_version .212.44.26.ghost_row.rci.en.ca.zip
status 7
instillation aborted
Click to expand...
Click to collapse
You need to have stock recovery and have no system changes, like xposed or missing system apps.
See the complete moto X guide in general section for help on getting back to stock.
:good:
Darth said:
You need to have stock recovery and have no system changes, like xposed or missing system apps.
See the complete moto X guide in general section for help on getting back to stock.
:good:
Click to expand...
Click to collapse
Hate to be more of a bother.
I found the section you were talking about however the firmware link is down it seems. The below link seems to have what I need but im not 100% on that.
My phones current build number is kxa21.12-l1.26
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25&page=5
Thank you!
I can't say for sure, but if the file is for your carrier and the correct version number... You should be good.
And after you are stock... Ota should come again. And work this time.
Again, I can't guarantee the files... But you should be pretty safe as long as it's for your carrier, and you don't try to downgrade. :good:
21q said:
Hate to be more of a bother.
I found the section you were talking about however the firmware link is down it seems. The below link seems to have what I need but im not 100% on that.
My phones current build number is kxa21.12-l1.26
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25&page=5
Thank you!
Click to expand...
Click to collapse
Darth said:
I can't say for sure, but if the file is for your carrier and the correct version number... You should be good.
And after you are stock... Ota should come again. And work this time.
Again, I can't guarantee the files... But you should be pretty safe as long as it's for your carrier, and you don't try to downgrade. :good:
Click to expand...
Click to collapse
Well it seems to be right. Ill update when the download finishes in 3 hours...
Just an update for anyone that happens across this post. That file was correct for rogers moto x. After which motorola update services needed to be updated through the play store. Then after checking for updates lollipop update is pushed through
Hey guys,
Newbie here I have flashed a couple of previous devices but never a samsung until now.
It the S5 AT&T version.
I followed the instructions here:
http://forum.xda-developers.com/att...w-to-update-to-g900aoca-5-0-keeproot-t3076803
But keep getting the error:
e: footer is wrong
e: signature verification failed
Installation aborted.
And the ROM doesn't load.
Please advice. The device is rooted.
If you are already rooted use flash fire application and flash it ..i also use that instruction to update my g900a model to 5.0 ..
Sent from my SAMSUNG-SM-G900A
I've a XT 1092 bought in Germany, now it is:
Andriod version: 5.0
System version: 22.21.19.victara_retde.retdeall.en.DE.retde
Build number: LXE22.46-19
What I've done on it:
1, Unlock,Root
2, Being unable to do OTA, download a German version of 5.0, recovery to this 5.0 through fastboot
Now there is always system update notification on the cell phone, so I download it automatically and try to update it.
Then the little robot appears and updating process starts.
But it failed every time, after power on the phone, it just says no change was made.
I enter the fastboot mode on phone through volume down and power button, and it says:
Device is unlocked. status code: 3
Software status: modified.
How could I successfully do an OTA?
Why it still says modified even after I recovered the phone to a stock version 5.0?
Many thanks, and wish you all a Merry Christmas!
vegetasummer said:
I've a XT 1092 bought in Germany, now it is:
Andriod version: 5.0
System version: 22.21.19.victara_retde.retdeall.en.DE.retde
Build number: LXE22.46-19
What I've done on it:
1, Unlock,Root
2, Being unable to do OTA, download a German version of 5.0, recovery to this 5.0 through fastboot
Now there is always system update notification on the cell phone, so I download it automatically and try to update it.
Then the little robot appears and updating process starts.
But it failed every time, after power on the phone, it just says no change was made.
I enter the fastboot mode on phone through volume down and power button, and it says:
Device is unlocked. status code: 3
Software status: modified.
How could I successfully do an OTA?
Why it still says modified even after I recovered the phone to a stock version 5.0?
Many thanks, and wish you all a Merry Christmas!
Click to expand...
Click to collapse
To successfully do OTA, your system must fully unmodified, this including no custom recovery, unrooted, stock boot logo, etc. So, if your system only rooted, you have to unroot first. Or the easiest way, just flash the stock system and recovery image, then perform OTA.
Sent from my XT1095 using Tapatalk
Nevermind, delete.
bimasakti85 said:
To successfully do OTA, your system must fully unmodified, this including no custom recovery, unrooted, stock boot logo, etc. So, if your system only rooted, you have to unroot first. Or the easiest way, just flash the stock system and recovery image, then perform OTA.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
thanks for your replay.
my x2 is now on a German version 5.0, and unlocked.
i think it is unrooted, but truth be told the last step I had taken before running into this OTA issue was returning the rooted phone to 5.0 by fastboot.
so now I'm even not sure weather it is rooted or not.
I've tried the steps regarding below method with stock ROM, hoping it can return to stock status and be ok to do OTA.
http://forum.xda-developers.com/moto-x-2014/general/guide-return-to-stock-official-status-t3274121
Question: is this what you've suggested "flash the stock system and recovery image"?
but when i access the bootloader, it stays the same as before, and says:
device is unlocked. status code: 3
software status: modified.
then I put the zip stock ROM into phone, and tried to do OTA on phone both with original name and modified name(update.zip)
But after selecting the ROM in recovery, it says:
qe 1/1
--install/data/media/0/update.zip...
finding update package..
opening update package...
verifying update package...
E:footer is wrong
E:signature verification failed
installation aborted.
all the thing i want is being able to to OTA, I have searched some threads both on domestic forum in China and on XDA
but no one works.
thanks in advance.
vegetasummer said:
all the thing i want is being able to to OTA, I have searched some threads both on domestic forum in China and on XDA
but no one works.
thanks in advance.
Click to expand...
Click to collapse
Why would you want to do an OTA?
Just grab the newest ROM and flash it.
I've seen a 6.0 XT1092 ROM somewhere on these forums.
vegetasummer said:
thanks for your replay.
my x2 is now on a German version 5.0, and unlocked.
i think it is unrooted, but truth be told the last step I had taken before running into this OTA issue was returning the rooted phone to 5.0 by fastboot.
so now I'm even not sure weather it is rooted or not.
I've tried the steps regarding below method with stock ROM, hoping it can return to stock status and be ok to do OTA.
http://forum.xda-developers.com/moto-x-2014/general/guide-return-to-stock-official-status-t3274121
Question: is this what you've suggested "flash the stock system and recovery image"?
but when i access the bootloader, it stays the same as before, and says:
device is unlocked. status code: 3
software status: modified.
then I put the zip stock ROM into phone, and tried to do OTA on phone both with original name and modified name(update.zip)
But after selecting the ROM in recovery, it says:
qe 1/1
--install/data/media/0/update.zip...
finding update package..
opening update package...
verifying update package...
E:footer is wrong
E:signature verification failed
installation aborted.
all the thing i want is being able to to OTA, I have searched some threads both on domestic forum in China and on XDA
but no one works.
thanks in advance.
Click to expand...
Click to collapse
Do you try to flash the full 5.1 stock rom with full wipe and then take th OTA update?
Full Roms for German Retail:
https://drive.google.com/open?id=0B...w3a1IzVFN6U2d3NFQ4cEVuNzVJTDZjamstdGxSbk90dTA
vegetasummer said:
thanks for your replay.
my x2 is now on a German version 5.0, and unlocked.
i think it is unrooted, but truth be told the last step I had taken before running into this OTA issue was returning the rooted phone to 5.0 by fastboot.
so now I'm even not sure weather it is rooted or not.
I've tried the steps regarding below method with stock ROM, hoping it can return to stock status and be ok to do OTA.
http://forum.xda-developers.com/moto-x-2014/general/guide-return-to-stock-official-status-t3274121
Question: is this what you've suggested "flash the stock system and recovery image"?
but when i access the bootloader, it stays the same as before, and says:
device is unlocked. status code: 3
software status: modified.
then I put the zip stock ROM into phone, and tried to do OTA on phone both with original name and modified name(update.zip)
But after selecting the ROM in recovery, it says:
qe 1/1
--install/data/media/0/update.zip...
finding update package..
opening update package...
verifying update package...
E:footer is wrong
E:signature verification failed
installation aborted.
all the thing i want is being able to to OTA, I have searched some threads both on domestic forum in China and on XDA
but no one works.
thanks in advance.
Click to expand...
Click to collapse
Did you flashed 5.1 or 5.1 based custom rom previously like cm12. 1?
I'm facing the same problem. Did you get any solution?