Database Develop

[Q] Screen not responding to touch in TWRP

I was trying to root my one for the first time. I followed someone's tutorial online, and everything was perfect at first, until I got into using TWRP for recovery. I used version 2.5. After I got into it, the touch screen is not working. I stuck in the lock screen now, not able to unlock, not able to restart, not even able to power off. After some digging, I found out that probably I should have used the version 2.6 instead in the first place. Now my question is, do I need to wait until the power drains out before I could do anything else, or if there is anything I could do to restart the phone and do this recovery process again with TWRP v2.6? Thanks.

kevin0634 said:
I was trying to root my one for the first time. I followed someone's tutorial online, and everything was perfect at first, until I got into using TWRP for recovery. I used version 2.5. After I got into it, the touch screen is not working. I stuck in the lock screen now, not able to unlock, not able to restart, not even able to power off. After some digging, I found out that probably I should have used the version 2.6 instead in the first place. Now my question is, do I need to wait until the power drains out before I could do anything else, or if there is anything I could do to restart the phone and do this recovery process again with TWRP v2.6? Thanks.
Click to expand...
Click to collapse
try doing a hard reset and flash the latest TWRP in recovery mode.
hard reset:
hold your phone under bright light ( i personally use a torchlight for this)
press power + vol down button
i had the same panic attack just few days ago

office usirmr
kevin0634 said:
I was trying to root my one for the first time. I followed someone's tutorial online, and everything was perfect at first, until I got into using TWRP for recovery. I used version 2.5. After I got into it, the touch screen is not working. I stuck in the lock screen now, not able to unlock, not able to restart, not even able to power off. After some digging, I found out that probably I should have used the version 2.6 instead in the first place. Now my question is, do I need to wait until the power drains out before I could do anything else, or if there is anything I could do to restart the phone and do this recovery process again with TWRP v2.6? Thanks.
Click to expand...
Click to collapse
It is because your phone has updated firmware with the updated touch drivers. twrp 2.5 does not support the new drivers as 2.6 doesnt support the old drivers either. Download official 2.6.3.0 img file. reboot into boot loader. If you are stuck on twrp hold power button until phone turns off "10-15" sec. Hold vol down and power to get into boot loader. click fastboot. Use your computer in terminal or command
fastboot flash recovery openrecovery-twrp-2.6.3.0-m7.img
obviously you have to be in the directory with the img file. Search twrp in google to get newest img file

an0ther said:
It is because your phone has updated firmware with the updated touch drivers. twrp 2.5 does not support the new drivers as 2.6 doesnt support the old drivers either. Download official 2.6.3.0 img file. reboot into boot loader. If you are stuck on twrp hold power button until phone turns off "10-15" sec. Hold vol down and power to get into boot loader. click fastboot. Use your computer in terminal or command
fastboot flash recovery openrecovery-twrp-2.6.3.0-m7.img
obviously you have to be in the directory with the img file. Search twrp in google to get newest img file
Click to expand...
Click to collapse
I have exactly the same problem.
But I can't hard reset the HTC ONE via volume down + power button...
Can't access the phone via USB attached cable and the common tools... :///
Do I have to wait till the battery is empty or is there a further solution?

Try opening the back cover and removing your battery and connecting again(btw its easy to remove the battery on a non removable battery mobile,unless you have a finger print scanner at the back side)...now switch on the mobile........you cant charge your mobile while it is switched off....so you have to charge your battery in the frozen twrp screen and later you have to remove and connect the battery to operate your mobile(you can charge your phone normally when it is switched on)...i tried this,works fine with my HTC 826..................
BTW if someone found a solution,,please help us to remove the frozen twrp screen....I think this would help

lol same problem, i powered off the phone, then power up it, (redmi 9 lancelot) and its in chinesse lol, hten i forgot to change the leanguege and reboot it, now waiting ;-;

Broken recovery / endless bootloop!

Hello there,
a few days ago i got a lot of problems with my wifi connections, and in a german forum they told me to check if a custom rom could work for me. So i installed the "Minimal ADB and Fastboot" tools to install the cwm and so on. After i flashed the recovery.img, my tablet restarted and now i am stucked in a boot loop.
The big problem is, I am not able to reach the menu for RCK and so on again with VOL- and Power Button. Just restarting and restarting and restarting... i can not connect via adb or fastboot. The only thing i can do is VOL+ and Power, Windows 8 then gives a signal of a connection, but i don't know what to do with this - cause I only have a black screen!
I hope, somebody is able to help me, to solve this issue.
Thanks and Regards
(sry for my bad english)

What version of stock Rom was it on the tablet when you flashed cwm and which version cwm did you flash
We recommended the latest Asus firmware and the latest working recovery is 6.0.4.7
Sent from my Note II using XDA Premium 4 mobile app
---------- Post added at 02:56 PM ---------- Previous post was at 02:52 PM ----------
I also had a bootloop before, I think I hold both volume and power to power down. Then wait 5 minutes then vol - and power to get into fastboot
Sent from my Note II using XDA Premium 4 mobile app

Hey! My version was the official 4.3 Update WW_10_26_1_18.
I wanted to install the Asus Stock Modded Deodexd Rom (10.26.1.18 JB 4.3) for root.
After I used this tutorial droidbasement.com/db-blog/?p=3223 for installing cwm, my device started to begin his loop. I am not able to Use Vol- / power! I also waited for several minutes

What happens if you just keep holding vol- and power without releasing
Sent from my Note II using XDA Premium 4 mobile app

All you have to do is power and vol +/- then flash back the stock recovery via fastboot.
Then wipe. Then boot in as normal (you will have to re-set up). If wipe does not restore you, grab 10.26.1.18 for your SKU from asus , rename the .zip inside to T4_SDUPATE, place on an microsd, pop it in, enter boot loader and enter RCK. Then it will flash it.
You should fastboot boot to ensure you are ok before permanent flashing, when putting a new recovery on.
Your bootloader must be on 10.26.1.18 to use anything on DB.

The Problem is, i have no fastboot connection anymore! The loop is going and going, vol- / pow does not work! It is still looping the asus logo and that's it!

Zkaface said:
The Problem is, i have no fastboot connection anymore! The loop is going and going, vol- / pow does not work! It is still looping the asus logo and that's it!
Click to expand...
Click to collapse
You have to be fast. When.the screen goes black hold vol +/- (hold them both) and it will enter fastboot when it cycles since I doubt u can fully power off in that state. Leave USB plugged in.

also, reply back with how exactly you flashed recovery (the command). did you do a fastboot flash recovery recovery.img or a fastboot flash boot recovery.img?

pershoot said:
also, reply back with how exactly you flashed recovery (the command). did you do a fastboot flash recovery recovery.img or a fastboot flash boot recovery.img?
Click to expand...
Click to collapse
that's a good question. I mean, i did exactly what is written in that post from droidbasement.

Then you should have no issue as long as you are on the appropriate boot loader. Hundreds if not thousands of users are using it at this point.
Power and hitting both vol + and - at same time should get it back in to fastboot. Please make sure you time it right.
Good luck.

Zkaface said:
The Problem is, i have no fastboot connection anymore! The loop is going and going, vol- / pow does not work! It is still looping the asus logo and that's it!
Click to expand...
Click to collapse
Hey Zkaface,
Did you manage to solve your problem or you still have a bootloop with asus logo? I have the similar problem, no fastboot available yet. Also, no any buttons combination. as -&+ & power. helping..
Pls reply if you have any idea / related news how to fix it.

Hello!
I have the same problem. After installing recovery.
When the screen is off transformer is in APX mode.
But as I understand for Tegra 4 still does not work. (((

Dggo said:
Hello!
I have the same problem. After installing recovery.
When the screen is off transformer is in APX mode.
But as I understand for Tegra 4 still does not work. (((
Click to expand...
Click to collapse
Correct. There is no wheelie/nvflash/bricksafe for this tablet.
You need to provide more information how you got into this situation.
Can you boot into fastboot?

berndblb said:
Can you boot into fastboot?
Click to expand...
Click to collapse
No, tried everything (vol-&power...).
berndblb said:
You need to provide more information how you got into this situation.
Click to expand...
Click to collapse
Did unlock, flashed recovery (accordance with the instructions 4pda.ru)
After reboot got android belly up.
And after the second reboot got endless bootloop(((
Exit from it turns out only by pressing vol+
I apologize for Google translator

Asus help is needed
Hello ASUS !!!
You have to HELP us, in order to keep your consumer with you. Other vice people will start to think that your ASUS brand is not a trustful brand anymore. Using such tricks as providing consumer with possibility to open a "Pandora's box" with bootloader unlock, and after you pushing consumer to pay about 300 $ for "motherboard replacing".
Following such kind of policy you will collect some money but definitely you will loose much more.
Sincerely,
Stream1313
PS: I was started to use the "unlock" etc not because I do not have other business t do but because of the serious problem in your DEFAULT STOCK software.
To: Moderator - please do not delete this post, hopefully some ASUS people will read it.

I have the same problem after trying to install OTA from SDcard and then erasing data from power+(vol-)-menu. It's looping all the time and I've tried everything. Only APX works if I use naked drivers (transformer APX-drivers).

krosettli said:
I have the same problem after trying to install OTA from SDcard and then erasing data from power+(vol-)-menu. It's looping all the time and I've tried everything. Only APX works if I use naked drivers (transformer APX-drivers).
Click to expand...
Click to collapse
You cannot get into fastboot?
How about ADB while it is looping?
You will have to provide more info: What do you have installed?
Bootloader version
ROM
Recovery
What exactly did you do?
APX is useless at this point as there is no way use nvflash on the Tegra4 yet.

berndblb said:
You cannot get into fastboot?
How about ADB while it is looping?
You will have to provide more info: What do you have installed?
Bootloader version
ROM
Recovery
What exactly did you do?
APX is useless at this point as there is no way use nvflash on the Tegra4 yet.
Click to expand...
Click to collapse
no, no chance to get into fastboot or using adb. the only thing that works is APX after pressing volume+ for about 10sec.
what did I do: I tried to install clockworkmod recovery and flashed recovery.img from fastboot. Then I restarted my device. I was sure I did every OTA-update because I checked almost every day for new updates. BUT starting up the tablet I saw my bootloader wasn't 10.26.1.18 (required for CWM). So I went to ASUS-website and downloaded WW_epaduser_10_26_1_18_UpdateLauncher and tried to update. But this did not work. So I rebooted pressing power and volume- ... then wiped data or whatever the third option was ... after that my looping started.
I've copied T4_SDUPDATE to my microSD and tried almost everything... charging, apx and looping is the only things that work at this moment

Sorry mate, but you hardbricked your tablet.
You installed a recovery that is incompatible with your bootloader, which is not good but fixable.
Then you used 'Wipe Data' from the bootloader which is pretty much a recipe for disaster with an incompatible recovery installed.
With no fastboot or adb access there is no way to get it back.
[emoji24]

so nothing I could do over APX, microSD and the 3 buttons? no chance, even in future?

Soft-bricked Huawei Ascend P7?

I have tried to root my Huawei Ascend P7 L10 phone, using Root Genius and also Kingo Root through my Windows PC.
The rooting has not been complete, something has been messed up on my phone.
When I try to enter recovery mode (volume + and -, and power), the led slowly blinks green and red, and the screen shows this message:
"Unfortunately boot failed, get more information... (Chinese letters) ...shutdown/rescue mode..."
After choosing rescue mode, the screen says "...Phone unlocked"...
I have several times tried to collect information on how to solve this, but the threads contain bits and pieces and partly tutorials/videos.
I would like to find a complete step-by-step tutorial on how to deal with this problem.
Also I have read that I need to install ADB, SDK, this and that, but it's hard to follow the instructions from beginning to end.
Can anyone help me with this?

Have you found a solution?

jonnynordhus said:
I have tried to root my Huawei Ascend P7 L10 phone, using Root Genius and also Kingo Root through my Windows PC.
The rooting has not been complete, something has been messed up on my phone.
When I try to enter recovery mode (volume + and -, and power), the led slowly blinks green and red, and the screen shows this message:
"Unfortunately boot failed, get more information... (Chinese letters) ...shutdown/rescue mode..."
After choosing rescue mode, the screen says "...Phone unlocked"...
I have several times tried to collect information on how to solve this, but the threads contain bits and pieces and partly tutorials/videos.
I would like to find a complete step-by-step tutorial on how to deal with this problem.
Also I have read that I need to install ADB, SDK, this and that, but it's hard to follow the instructions from beginning to end.
Can anyone help me with this?
Click to expand...
Click to collapse
What is your firmware version?
As far as I know that you could try to flash stock recovery and boot image and then download a compatible firmware for your phone and then force upgrade it which would solve the problem.

how chek firmware version help meeeeeee

amankha said:
how chek firmware version help meeeeeee
Click to expand...
Click to collapse
go to setting, and about phone

@jonnynordhus, i've already helped someone with a similar problem, try this:
Download B852 official ROM and copy it to root of your SD card to a new folder "dload"
It should look like this "/dload/UPDATE.APP"
Extract UPDATE.APP (on your computer) using Huawei Update Extractor (all files)
Go into bootloader (Power + Vol Down)
Now open command line and use ADB (Android Debugging Bridge) to send following commands to your phone:
fastboot flash recovery RECOVERY.IMG
fastboot flash boot BOOT.IMG
Now force update by turning off your phone, and turing him back on while holding all 3 buttons pressed down.
When screen comes on release the Power button but keep holding both Volume rockers pressed down until you see an EMUI logo.
If for any reason it fails to install, go back into recovery and do Wipe data/Factory Reset, and than try again.
Let us know how it went

Holding the Power + Button up. More does not carry the TWRP.

Hi, how are you? Good morning.
I need help installing TWRP, on my leeco le s3, x626.
I already have a Le max 2, unlocked and with TWRP installed by me, through the tutorials of Yourtube.
But this time, it is not working.
I did the whole process.
Several times, UP TO BRICKEI 2 TIMES on the device, and I came back with the rom stock.
With ADB open, with administrator permission
I already gave the command
Quick boot unlock.
And confirmed that it was unlocked.
More now when you ADB, with the command,
without fast recovery from fast flash twrp.img
Do a count and say that's right.
But when, pressing and holding the Power + Button up a screen does not boot and it restarts, it vibrates normally ....
logo logo below RECOVERY.
More does not carry the TWRP.
What I'm doing wrong.
Note I already tried to change the version - TWRP 3.0, TWRP 3.1, TWRP 3.2.
Nothing happens without default back to Recovery
Help me, it must be such a detail that I'm missing out.
Thank you very much for being able to help me.
And if anyone needs to unbrick a cell phone can talk to me.

Wish i could help you mate.
May I request you to check below thread and see if you can help me?
https://forum.xda-developers.com/le...p-internal-storage-0-mb-t3737943?goto=newpost

Stuck in twrp logo note 9

Hello,
I have flashed twrp over Odin and it works well, flashed custom room too, everything was super fine but after i restart the phone
Got stuck in twrp logo
Can't go to download mode or boot to system either.
Tried to hard restart power + vol - then after restart press power vol - bixby but same issue.
Download mode won't launch neither recovery.
Picture of the problem in the attachment
Please any solution?

first you flashed the wrong version of twrp according to your attachment, in my opinion you have to reflash everything and you can follow this tutorial and I hope it helps you

diznote4 said:
first you flashed the wrong version of twrp according to your attachment, in my opinion you have to reflash everything and you can follow this tutorial and I hope it helps you
Click to expand...
Click to collapse
Sorry but i don't think it'll boot first time or even i could flash custom rom from it if the recovery wasn't compatible.
After the twrp everything was fine, and i got access to twrp recovery and flash custom room without any problems.
First bot was fine, but after 2 consecutive restarts
This issue occurred .
And can't make it to download mode now, so I can't flash stock or anything.

I mean the correct version to flash android 13 it is twrp v 3 7 0 9 0 if not the phone hangs at twrp logo.
now to put back on download mode you have to do this manipulation
1/ connect your phone to your pc with the USB cable then press bixbi and power (between 5 and 7 seconds) and when the phone goes black at this moment don't let go of bixbi and power you have to press the volume button -
I hope it will go.