Database Develop

[Q] Galaxy Mini Bricked With Black Screen

Recently I bought my phone and installed ROM manager which i then proceeded to install CWM recovery and since there was no choice for my phone i chose the first one. It then asked me to reboot and i accepted and then it went all black out. It could not accept any key combination.Then after resurrection it could enter download mode but would end up not flashing but with an error message BML FORMAT FAIL-90220000. I then flashed arm11boot for gt s5570 and it flashed successfully but on restarting it went to another problem-bootloop. I tried re-flashing but it it came up with the bml error again, so i again flashed arm11boot and it went black dead..... it wont enter download mode but can enter recovery because when i press the recovery key combination it installs around 4 drivers but none is odin's. the screen lights up when i switch it on and can charge the battery but whenever i try to flash any rom it gets stuck at setup connection. Please help me ..........

Oh... C'mon ! We already talk about this... No ROM Manager for Mini ! :silly:
NEWBIE & NOOBS don't be such Lazy Buns !
If you want resolve this problem, Go to SSC (Samsung Service Center) and act KNOWN Nothing about flashing, rooting, etc.

wrong DPI + usb not recognizer

Hi , a friend gived to me his phone to install a custom ROM , i made that before with my SG sII , provlem is when i installed a CWM , DPI was changed (i guess i installed cwm from other phone ) and now all works fine but display is off , is working but is off , i can acces only Download mode , here , other problem "Usb not recognized" is plfrom phone cuz i tried with other usb , port or PC ! WHO can i reinstall firmware or solve this problem with usb or DPI ! PLEASE HELP ! In 1-2 days i need to give him phone back

I can't understand a thing what you wrote... Can you explain in detail, may be step by step what all you installed and how...

nokiamodeln91 said:
I can't understand a thing what you mean up there... Can you explain in detail, may be step by step what all you installed and how...
Click to expand...
Click to collapse
I was to my friend to install on his N7000 a custom ROM , i moved to sd card cm11 gaps and Philz recovery . My mistake was , i used Philz from my Galaxy S2 and when i installed the recovery , i think the DPI was changed , and now when i want to install cm11 or do a wipe , it shows " Galaxy Note GT-N7000 and them the screen is complete black or with withe lone on screen like was broken , now , all i can acces is Download mode , but i dont know what problems has the phone cause what i try is saing "USB not recognized "
P.S : when i turn on phone normaly after logon boot , screen turns off but sound said to me cause is working , logon sound or when i recive a call or sms , but screen remains off
SORRY MY BAD ENGLISH but i am very disperate right now to write corectly ...
Edit : i posted on youtube : http://youtu.be/0rV2ZHSITNQ

So you installed the wrong kernel... Try to blindly flash correct philz kernel... Empty the sd card.. Then just place n7000 philz kernel and navigate blindly with the buttons to install.. May be take help from s2 philz recovery on your phone..

[Q] Problem with startup screen, what with this?

Hi
I try flash mobile with firmware Lollipop 5.0.2 (CyanogenMod 12.0) from http://novafusion.pl/downloads/
Flash process was a corrupted with error message.
When I then want flash I have problem go to boot menu, but finally I flash to original firmware who was modified by brand operator. But this change disappear on flash mobile.
When I start (restart) mobile, I have broken screen 10-15 second - show on the picture ( i8190n.jpg)
It is possible do with this?
Exist any repair firmware for i8190n?
Thank you

Dwonload the bootlogo from http://novafusion.pl/downloads/ > Extras > Select your model and flash the Original bootlogo with ODIN.

Hi soralz
When I flash "original-bootlogo-nfc.zip", problem startup screen disappear.
Problem is only logo? not working S3?
Thank you

I have the same problem with my s3.
And now i cant start recovery mode and isnt recognized by a PC..
Im dead.. . i dont fine a solution..
Write me if you have a solution.

Hi
When flash and your phone still reboot and phone was not usable I use some steps.
Get off battery.
Most useful is Vol+ + Home + Power (then write me repair....)
Vol- + Home + Power and then flash via Odin
Best regards

So you have screen with info s3mini but no logo samsung with swirl.
Hmm, try in recovery Restore default setting to get rom without any bugs, after this go to download mode, install non branding stock rom by odin - You dont lose anything without addons from cell operator. After install turn off phone, go to recovery and do clean dalvik and cache and restart phone. Now might work properly.
I have a simillary problem in Dec 2013 when Nova fusion bring firsts cm11 releases. It will help me with this.
Sent from my GT-I8190 using XDA Free mobile app

Hard Brick Android one micromax AQ4501 plz help

android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.

afireon8 said:
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
Click to expand...
Click to collapse
It is recommended never to use "download+format all" option ......I have many times used sp flash tools for flashing stock rom ....I always used "firmware upgrade" option......I never faced any problem ....

same here bro...
my a1 also dead after flashing and not powering on
not even shows charging....
plz post if found any solution...

found something
i cannot try this because i dont hv fon with me....
http://forum.xda-developers.com/showthread.php?t=1943442

Try latest sptool i also face this problem & flash stock rom lollipop build may it will help you )*

just use sp flash tool 5.142

Guys m facing the same problem... Using sp flash tool version 5.1604 .. Help me plz

i,ve already flash my phone, but it is still bootloop

hi, can sombody help me
i got a bootloop note 8 SM-N950F/DS, and i already flash with odin 3.13.1 with pie firmware.( N950FXXU5DSB2, N950FXXU5DSC2, and N950FXXS5DSC6 ) . Flashing was successfull, but my phone is still bootloop. could you help me, thankyou

Battery or motherboard fault.

masgalau said:
hi, can sombody help me
i got a bootloop note 8 SM-N950F/DS, and i already flash with odin 3.13.1 with pie firmware.( N950FXXU5DSB2, N950FXXU5DSC2, and N950FXXS5DSC6 ) . Flashing was successfull, but my phone is still bootloop. could you help me, thankyou
Click to expand...
Click to collapse
Try to see if it boots into safe mode? (When booting hold down the volume down key until you'll get into homescreen).
If it still boot loops try going to recovery mode and factory reset your phone (this will delete all data!)

Sounds like that there maybe an issue with the internal storage. I would take your device to a Samsung service centre and let them take a look at it.