hallo all you smart devs.
i flashed the stock rom with the no verity file to go back to (original rom)
after flash the phone was booting into te android i reboot again to delete the SuperSu with the unsu file.
then when i reboot again the phone was dead and only showed the red charging light and it was not blinking.
my pc no reconise the device and there is no sound or anything in the device manager.
if this was the case then i could use the sp tool but allso this is not doing nothing.
Please help me with this as my warrenty is broken because the custom rom flashing.
i am really desperate and dont know what to do.
also the device is warming up when i have it to the wall charger but noting happens
any one please help i am also trying to use the warranty but i am afraid they will reject it.
if they do i have to open it myself and see if the battery is the problem or whatt ever.
Try to unbrick ,
https://forum.xda-developers.com/android/help/gu*ide-leeco-le-s3-x626-x622-unbrick-t3705542
Full charge battery first.
I left the phone for more then 24 hours on charger but noting happend also no screen sith charging logo.
Its probaly a hardware deffect i jusy contacted the warrenty and its now on its way the get repaired.
I will let it know what the problem was.
Related
Need some help trying to figure out how to make my Captivate turn on...I press power and get the AT&T slash screen and then the galaxy s logo loads for about 3 minutes and goes to blank dark screen with the capacitive buttons lit. this is not good because my **** won't boot into recovery either
You should flash to stock then...pull battery, hold volume buttons and plug in usb with odin loaded and ready on the computer. There's plenty of threads to help you out
Sent from my phone so excuse the spelling errors
Funnily enough... My phone just did that too. I was installing Mort Widget and it just totally bricked...
I'm rather p!ssed at this...
Course this was after it deleted all my email accounts and SMS.
What you'll need.
Odin (search or look in any of the ROM/Firmware threads, for example the i9000 ROM or unofficial JH2 or JH3 ROM)
Your USB cable.
The firmware files.
Steps:
Remove battery, SIM card and micro SD card.
Open Odin on the computer.
Put the battery back in.
Plug in the USB cable to the phone.
Hold both volume up and down.
With VOL up/down held in, plug usb cable to the computer.
Your phone will show the beloved DOWNLOADING yellow image.
Odin:
Simply select the rom/firmware you want to flash to and enjoy.
I can confirm this will not overwrite the phone's internal 16gb storage, which is where most apps save backups to.
Future steps:
Before trying anything crazy, copy the entire phone internal 16gb storage to your computer. If you brick, you can always get a new captivate, copy the junk back and run a restore.
I recommend Titanium backup (donate the $6, the backup/restore is SUPER SUPER fast) along with Clockwork recovery. Clockwork's Nandroid makes full kernel backups and you can boot to recovery from the phone itself. No more adb reboot download or adb reboot recovery.
sorry for my english i have a 19000m the one from bell my phone boot with the GALAXY S LOGO WITH THE MUSIC BUT AFTER THAT BLACK SCREEN CAN I REPAIR THAT ?
Yes, odin is about your only hope here... Even if you boot into the bios and try to do a factory reset it will come up with error after error...
Reflashing will totally wipe and start fresh.
I am curious however. I think i isolated where my problem came from but I am still curious...
Did you try to sideload anything?
It happened to me twice with Bell's Vibrant version. The first time, just after one week after getting it (not rooted). They simply gave me a brand new one.
The second one took 3 week to go dead. Knowing my way around Linux Embedded systems, this time I investigated the issue. In recovery mode, there were error messages saying that the system could not fine the internal flash memory partitions. I could confirm from the kernel messages that partitions on internal sdcard had disappeared. I did factory reset, reflash original stock firmware with Odin, but it did nothing.
I Sent the phone back for repair and three weeks later, they gave me another one (probably refurbished!!).
My phone just turns on, with a black screen and the capacitive buttons lit up. Nothing else happens. When I try to go into download mode, it only goes back to this black screen. I does however detect that the phone is connected driver wise on the computer, but does not show up in Hemidall or Odin. I've tried just about everything
i used ODIN to resotore the phont to stock
but when it finsh...i get black screen
and the phone dose not work or do anything.
any help plzzz
isa.ahmed said:
i used ODIN to resotore the phont to stock
but when it finsh...i get black screen
and the phone dose not work or do anything.
any help plzzz
Click to expand...
Click to collapse
Does it light up or display anything and then go black, or does it just do nothing? If it does nothing, you're probably bricked, but try this anyway just in case your phone still has some life in it:
open Odin; press and hold both volume buttons and plug in your USB. If Odin lights up yellow, flash.
If that doesn't work, buy or build a jig, use it, and see if it goes into download mode. If it doesn't, plug the cable in anyway and see if Odin recognizes it. If it does, flash.
If that doesn't work, you're probably bricked. JTAG or Unbrickable Mod are your options from here, neither of which I personally know anything about but you can search around and find someone who can help you.
Hard Bricked= No signs of life, black screen no matter what, no response to USB plug in. Nothing but Unbrickable mod or JTAG will fix, I WOULD SUGGEST getting Unbrickable because you only have to get it once, and it cost the same as JTAG.
Soft Bricked= DL mode access is available(by jig or button combo and usb), recovery too, has some life in it. Can use ODIN/HEIMDALL to fix it.
when the flashing finsh and say done...and show the green light in the ODIN. the phone did not start up
dose this mean it break or dead charger?
as m not shure if the battery is full or not.
anyway i can pass the battery by over it with cuted USB cable?
isa.ahmed said:
when the flashing finsh and say done...and show the green light in the ODIN. the phone did not start up
dose this mean it break or dead charger?
as m not shure if the battery is full or not.
anyway i can pass the battery by over it with cuted USB cable?
Click to expand...
Click to collapse
If you got a green light, I would think it should at least turn on. However, if it was a successful flash, it should charge with the phone off. A bricked phone and a bad charger would both look the same: dead.
Try a different charger or battery if you think your battery could that dead. However if your battery died during your flash, that could also be the cause of your brick.
i charge the battery...and nothing happend
will the USB JAG solve it?
as i read in some post this will not
i need to send to some one to do it by opeing the phont it self
isa.ahmed said:
i charge the battery...and nothing happend
will the USB JAG solve it?
as i read in some post this will not
i need to send to some one to do it by opeing the phont it self
Click to expand...
Click to collapse
A jig is worth trying, but I suspect it will not solve your issue. You are correct, you need to send it to someone to have it fixed. Send a PM to AdamOutler or Connexion2005 and they can point you in the right direction.
what a crapy phone
i had Moto Defy and i never face same issue
so now am end with usellss phone..and need to theough away
what a waist of mony
isa.ahmed said:
what a crapy phone
i had Moto Defy and i never face same issue
so now am end with usellss phone..and need to theough away
what a waist of mony
Click to expand...
Click to collapse
You moto defy never flashed boot loaders since Motorola always had them locked down, and if you didn't know what you were doing flashing the stock Emma's that had boot loaders then it is not the phones fault. You should never really have to flash boot loaders and that is the ONLY risky part in flashing on these phones. Other than that Samsung cappys are almost TRUELY unbrickable (HARD BRICK) unless you mess up flashing boot loaders. WHICH YOU DID WHETHER YOU KNEW IT OR NOT BY FLASHING THE STOCK ODIN. SEND IT FOR UNBRICKABLE MOD, it is cheap repair and you WONT run into your same mistake ever again.
Sent from My KickAss CM7 Captivate
so no way i can do it here?
need to send it?to who i send? and who to trust?
i found some one will do for 50$
http://www.mobiletechvideos.com/blog/?page_id=776
Adam Outler
Sent from my SGH-I897 using xda premium
and other issue, i never toch the bootloader of it
i only re flash the OS of it only..and end with black screen.
this gay he will do what?
can the agent do it?
as it will be easer than to send it
can i have link of who will do it
So i was on FDE kernel trying to install FDE +2 ROM
and it didnt work so i flashed it to alfs8a GDX kernel and after that i turned it on but nothing stuck on alfs8 boot image....so i took the battery out ,put it back in and nothing....cant turn it on....can't flash...cant connect phone
(battery is near end....)
anyway Is there a possibility for my phone to be hard bricked?
I have 11W19
PCC(repair phone) is unable to procced with ......
HELP
what about seus have u tried it.?
8cpaiw said:
So i was on FDE kernel trying to install FDE +2 ROM
and it didnt work so i flashed it to alfs8a GDX kernel and after that i turned it on but nothing stuck on alfs8 boot image....so i took the battery out ,put it back in and nothing....cant turn it on....can't flash...cant connect phone
(battery is near end....)
anyway Is there a possibility for my phone to be hard bricked?
I have 11W19
PCC(repair phone) is unable to procced with ......
HELP
Click to expand...
Click to collapse
Firstly , whenever you flash any ROM or any kernel , you should ALWAYS make sure battery is more than 50%
Since you can see the boot animation , so you have a soft brick and NOT a hard brick.
First , you need to charge your battery.
I'm not sure , but maybe connect to your charger and turn on your phone till the green LED lights up.
Leave it like that for 2 hours so that the battery charges
Then try to fix it using flash tool/PCC/SEUS
1.I have some problems with my charger
2.I cant see bootanimation
3.I tried with all kinds of repair programs....(flashtool,PCC,SEUS....)
4.No led light,no vibrate no nothing
5.Today,in school i will ask my friends to borrow me charger so i will try that
but few hours ago i accidently safetly removed ADB sony ericcson drive....or something like that
8cpaiw said:
1.I have some problems with my charger
2.I cant see bootanimation
3.I tried with all kinds of repair programs....(flashtool,PCC,SEUS....)
4.No led light,no vibrate no nothing
5.Today,in school i will ask my friends to borrow me charger so i will try that
Click to expand...
Click to collapse
Might be because of low battery.
As I said , charge your phone and then after two hours , repair with the above mentioned tools
Will try it Thanks
Hello:
Recently reflash CM ROM and was working fine. Then I noticed that the missing of Google APKs, so without any wipe, I flash gapps from zip copied in microsd card.
Then on reboot, it loops in the boot animation for more than 10 min (I was attending a patient, I'm doctor). I removed the battery several times and the same thing happened until it stopped power on.
I did the battery trick many times, but did not turn on anymore. All that happens is that when I put the charger gives me the green LED d that the battery is charged.
I went to a workshop cel and they said it was damaged and I need to recopy the bootloader via MEDUSA ( JTAG ) . But no, it didn't worked at all. Then they said that maybe is the power button problem (but it don't turn on with battery trick !!!!)
I am very sad about this and then other technician told me that if after JTAG not raised , then it has no solution for my cell .:crying:
- Is my cel definitely brick ?
- Anyone know what to do to get it back ?
- It is true that after JTAG that doesn't work anymore, the cel definitely is broke?
Please, help me....
Note: The PC don't recognize the phone using USB cable...
Hi guys, this is my first time trying to flash a smartphone and i had no luck. After i press the power button nothing happens, only a small vibration and a little green led blink. :crying:
I'm trying to flash the stock ROM through Flashtool but my Xperia SP keeps disconnecting and connecting after a minute in Flash mode, the green light turn OFF for a second then ON again every minute. But if connected in Fastboot mode the device keeps connected normal but I cant select the .FTF file. I have no idea what to do now.
I bought it last year second hand its my first smartphone im broke as **** i cant believe its not working anymore. My last phone was a Nokia 5310 that i used until decomposition, literally. Sorry for bad english.
Please help.
share the instructions that you followed.
Did you root your phone and unlocked the bootloader, installed recovery ?
it is possible that your drivers are not properly installed, try using windows 7
I have similar issue but phone is not bricked it's charging really really slowly. And I don't know issue of it? If someone can link some room that don't have this issue that would be g8.
It's not my first time to flashing roms. But this time i think phone dead. Here is the story: I installed cm12 and wipe system flash cm 14 adn finally today i flashed cm13 and i loved it. But when i opened file explorer i see internal storage is 2gb(before flashing it is 10gb). When i opened TWRP 3.0.2 i see another legacy sd partition. I think if i will format this partition i can get 10gb internal storage back. And i formatted legacy sd using twrp. But when i push reboot system now phone turned off and never go back. no any red or green light. I'm sure phone have min 50% charge and battery new(not battery problem). I tried remove battery but it is not work. When connect it to pc see this on bottom right corner ''QHSUSB_DLOAD'' and no driver found and no any light on phone. What can i do now? Flash tool and Emma dont recognize device.
Elshan_Nurmammadov said:
It's not my first time to flashing roms. But this time i think phone dead. Here is the story: I installed cm12 and wipe system flash cm 14 adn finally today i flashed cm13 and i loved it. But when i opened file explorer i see internal storage is 2gb(before flashing it is 10gb). When i opened TWRP 3.0.2 i see another legacy sd partition. I think if i will format this partition i can get 10gb internal storage back. And i formatted legacy sd using twrp. But when i push reboot system now phone turned off and never go back. no any red or green light. I'm sure phone have min 50% charge and battery new(not battery problem). I tried remove battery but it is not work. When connect it to pc see this on bottom right corner ''QHSUSB_DLOAD'' and no driver found and no any light on phone. What can i do now? Flash tool and Emma dont recognize device.
Click to expand...
Click to collapse
Hi! i have de same problem right know... i format de lagacy sd and now is bricked like your phone.
Did you solve IT?
Hi. Generally when the phone doesn't respond, you had to consider it hard bricked, and there's no solution that you can apply without putting the hands on the Hardware. My advice is to try let it charging for 24+ hours and see if something happens. For example if the led turns on, probably you are in soft brick and you can bring it back to life. There's a tread here in XDA explaining the importance of charging cycles for the late 2012 Sony devices.
In my case I couldn't flash nothing on xperia T until I haven't let it charging for 25 hours straight. Then I was able to bring it back to life.
Hope you can do the same. In any case, good luck.
I might be reckoning wrong, but I believe I've recovered my T several times using stock firmware in such case.. Then go again with CM or whatever.
landerxxx said:
Hi! i have de same problem right know... i format de lagacy sd and now is bricked like your phone.
Did you solve IT?
Click to expand...
Click to collapse
MaliSimo said:
Hi. Generally when the phone doesn't respond, you had to consider it hard bricked, and there's no solution that you can apply without putting the hands on the Hardware. My advice is to tryif something happens. For example if the led turns on, probably you are in soft brick and you can bring it back to life. There's a tread here in XDA explaining the importance of charging cycles for the late 2012 Sony devices.
In my case I couldn't flash nothing on xperia T until I haven't let it charging for 25 hours straight. Then I was able to bring it back to life.
Hope you can do the same. In any case, good luck.
Click to expand...
Click to collapse
after+ 12hr of charging i see blinked red every 2 mint .... what can ido for this ??plz help sorry for bad english
Sorry for the late reply. Its a good sign, so now you know your phone its not hard bricked. There's hope!!! Let it charge for other 12+ hours and you should see the blinking red led becoming continuous. Then you could try flashing a kernel and a custom recovery, if it works you can try flashing a ROM. Alternatively you can try to flash a stock ROM via flashtool.
Anyway now you know the phone it's alive, keep trying and you will able to bring it back to life.
Many thanks for you pro.... but usb not recognized or appear like "Qualcomm driver ..any advice ....any way I could leave it in charger and try again....Thanks for ur reply...
Maybe you can try, if you didn't already, to install the latest Sony flashtool, browse the installation folder, search for drivers and use the installation tool to reinstall the blue board 3 drivers (if you are using win 10 you may need to disable the driver signature to install the drivers properly).
I got the same problem with my Xpetia T, here I will report the steps I followed:
1. The phone didn't respond to any command, even to hard reset (pressing power button and volume + for 10s until you don't feel 3 vibrations, not recommended to do that, but I was a little frustrated).
2. I let it charging for a bit then I tried to flash a stock ftf file ( Installing the drivers just how I explained at the beginning) via flashtool. I managed to put the phone in flash mode but the procedure failed when the program started to flash the system file.
3. So I let it charge for 25h: in the first 5h no led showed up, then blinking red led, then continuous red led and finally continuous green led.
4. After that I retried to flash a stock ROM via flash tool but the procedure failed again when it was flashing the file system.
5. So I made a desperate try: I flashed all partitions but system via flash tool, then I extracted the system partition opening the ftf file with a zip manager and I used the fastboot functionality in flashtool to flash the system partition.
6. After I did that, I didn't see any improvement and I decided to put the phone in charge again and..... The kernel battery charging symbol appeared!!!
7. I let the phone charge over night then I booted it up! He booted in provisory mode and I managed to turn on USB debug and I gave permissions to my PC.
8. Then I installed TWRP via adb and so Linage 14.1 custom ROM.
The only problem I found it's my battery is practically dead, so I will try to replace it by my self in near future (this phone as known battery issues)
This is the method I followed, I don't know if is equally good for your case but I Hope this steps somehow help you.