Database Develop

[Q] Bricked ? ? ?

SGH-I537 AT&T
1. Phone is never seen by or connects to Kies, just stays at Connecting. USB drivers are installed, and when connected to PC you get device connection tone, but phone is not seen in My Computer like normal.
When I enter the Model # SGH-I537 and the SN#, it comes back with...Please check the model name and enter it. Or it connects and message comes back from Samsung saying something like it can't verify the phone. For some stupid reason I can't find the latest official firmware for my phone 4.4.2, all I can find is 4.2.2.
Someone told me if you flash using Odin that you need to flash with the same firmware that is currently on your phone. I also hate to use Odin as I've heard of so many people bricking their phone with Odin. I'm not sure what's available for the I537, but once when I bricked my S2, I was able to connect a USB jig that shorted a couple of the pins, and this allowed me to boot into recovery. I wish I had something this simple of my S4 Active.
I'm in a bad way, I sold this phone, so I went into recovery to do wipe and reset the phone to factory, wipe was successful, but when rebooted it would only boot to Download mode. So then I tried to use Kies, and with Kies I never actually got into recovery, then the next time I rebooted, it went the Firmware upgrade encountered an issue for Kies, and is currently stuck there. I listed the phone online for sale and was purchased overnight. Now I have a phone that is worthless in its current state. Phone was only rooted, its never had anything else on it but stock firmware. I rooted it to use battery savers and get rid of some of the bloat.
I at updated it OTA to 4.4.2, and then rooted with towel. I tried to used Odin to push 4.3 I got off XDA official firmware, but that just failed. Anyone have an bright ideas? Help Please ! ! !
Log:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

HC1Gunner said:
SGH-I537 AT&T
1. Phone is never seen by or connects to Kies, just stays at Connecting. USB drivers are installed, and when connected to PC you get device connection tone, but phone is not seen in My Computer like normal.
When I enter the Model # SGH-I537 and the SN#, it comes back with...Please check the model name and enter it. Or it connects and message comes back from Samsung saying something like it can't verify the phone. For some stupid reason I can't find the latest official firmware for my phone 4.4.2, all I can find is 4.2.2.
Someone told me if you flash using Odin that you need to flash with the same firmware that is currently on your phone. I also hate to use Odin as I've heard of so many people bricking their phone with Odin. I'm not sure what's available for the I537, but once when I bricked my S2, I was able to connect a USB jig that shorted a couple of the pins, and this allowed me to boot into recovery. I wish I had something this simple of my S4 Active.
I'm in a bad way, I sold this phone, so I went into recovery to do wipe and reset the phone to factory, wipe was successful, but when rebooted it would only boot to Download mode. So then I tried to use Kies, and with Kies I never actually got into recovery, then the next time I rebooted, it went the Firmware upgrade encountered an issue for Kies, and is currently stuck there. I listed the phone online for sale and was purchased overnight. Now I have a phone that is worthless in its current state. Phone was only rooted, its never had anything else on it but stock firmware. I rooted it to use battery savers and get rid of some of the bloat.
I at updated it OTA to 4.4.2, and then rooted with towel. I tried to used Odin to push 4.3 I got off XDA official firmware, but that just failed. Anyone have an bright ideas? Help Please ! ! !
Log:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Kies does not work with the i537, AT&T will not allow Samsung to release any of the firmware. You have nothing to worry about though, all you need to do is put the phone in download mode and use Odin to flash the ML2 package. MAKE SURE YOU DO NOT LOAD THE BOOTLOADER IN ODIN, IT WILL FAIL TO FLASH. Flash the other 3 files in Odin, reboot the phone to stock recovery and flash the NE3 OTA.
You're fine, it'll be in working condition by the end of the night.

Sounds Positive
Devo7v said:
Kies does not work with the i537, AT&T will not allow Samsung to release any of the firmware. You have nothing to worry about though, all you need to do is put the phone in download mode and use Odin to flash the ML2 package. MAKE SURE YOU DO NOT LOAD THE BOOTLOADER IN ODIN, IT WILL FAIL TO FLASH. Flash the other 3 files in Odin, reboot the phone to stock recovery and flash the NE3 OTA.
You're fine, it'll be in working condition by the end of the night.
Click to expand...
Click to collapse
Thanks for you help on this holiday weekend! I will give this a try tomorrow and cross my fingers. I was able to download the ML2 package, but I'm not sure about the NE3 OTA, I'm getting a lot of different hits when I do a search for it. Could you possible reply back with a link? I not sure what NE3 is, was that an update? I basically want to leave the phone stock for the new owner. Or are you saying that the ML2 flash will fix my phone, and after I have successfully booted my phone, I can go into settings/about phone/ software update, and this will give me NE3 OTA?
I see two different files:
ML2 to NE3 OTA File 444 MB
NC9 to NE3 OTA File 66.4 MB
BTW, I read somewhere in a post that if you are going to run/use odin, then you can not have Kies installed on your PC, any truth to this?

HC1Gunner said:
Thanks for you help on this holiday weekend! I will give this a try tomorrow and cross my fingers. I was able to download the ML2 package, but I'm not sure about the NE3 OTA, I'm getting a lot of different hits when I do a search for it. Could you possible reply back with a link? I not sure what NE3 is, was that an update? I basically want to leave the phone stock for the new owner. Or are you saying that the ML2 flash will fix my phone, and after I have successfully booted my phone, I can go into settings/about phone/ software update, and this will give me NE3 OTA?
I see two different files:
ML2 to NE3 OTA File 444 MB
NC9 to NE3 OTA File 66.4 MB
BTW, I read somewhere in a post that if you are going to run/use odin, then you can not have Kies installed on your PC, any truth to this?
Click to expand...
Click to collapse
I've never heard about the Kies / Odin issue, although that doesn't mean it's not true in certain cases.
NE3 is the latest firmware, you mentioned you were already on 4.4.2, so this will ensure that you're back on 4.4.2, and should fix some of the bugs with the original 4.4.2 OTA that was pushed a couple months ago.
The 2 OTA files you referenced are for updating from different firmware. So since your phone will be on ML2 and you're going to update it to NE3, you need to download the 444MB file and flash it through stock recovery.

Need help PLEASE! Samsung Galaxy Note 8 SM-N950N Exynos 8895 STUCK IN DOWNLOAD MODE

So I am a poor guy that has a dream of using a Note 8 for this is my dream phone. Somebody post a listing in Facebook that his note 8 is somewhat useless for he don't know what is the problem and he is selling it as a bargain so I grab it.
Now I am stuck with this phone that won't turn on (unless you go and place it on a wireless charger then it will turn on by itself), won't do anything and is stuck with download mode(see photo 1).
I try to flash a SM-N950N firmware using Odin v3.13.1 but I am getting an error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4226 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
(see photo 2)
Please help me. I really want to have this note 8.
Unfortunately, XDA forums won't allow me to upload pics. You can email me @ [email protected]

Could be that the internal storage is faulty and needs repaired.

iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
What do you mean internal storage? like the emmc?

eunszette said:
What do you mean internal storage? like the emmc?
Click to expand...
Click to collapse
Yes.

iceepyon said:
Yes.
Click to expand...
Click to collapse
That is sad. Well I try to do it again and I am getting a different error which is
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

Flash the root file via odin. That is the easiest way to repartion. This worked for me.
Sent from my SM-N950F using Tapatalk

where is that root file via odin @yashthemw ?

iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
Hi am wondering if you could help with my Galaxy Note 8
I am able to install the firmware using ODIN without any errors on download mode but after ODIN is finished the phone turns off and does not boot.
I have taken the phone to a repair shop as well and they have confirmed that there is no hardware issues,

truenitos said:
where is that root file via odin @yashthemw ?
Click to expand...
Click to collapse
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance

Yashfauuu said:
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Click to expand...
Click to collapse
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZIHpXvYPGVBJZmKE1ga5_dH4oIUx5WXhkck

Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZ...dH4oIUx5WXhkck
Click to expand...
Click to collapse
I have the same problem. Only download mode available. Cannot turn on the phone after restarting, the phone turns on automatically after about 1 hour.
The above file stops at:
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1401)..
<ID:0/011> File analysis..
<ID:0/011> Total Binary size: 6116 M
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

did it will work forme ( N950N) u5
the file in meag is encrypted could you pleasegive us the decription password
my phone stops also like this

I accidentaly locked bootloader with TWRP installed. NEED HELP!

Hello guys. I ruined my phone pretty bad.
It's a long story, but i had android 8 on my note 8 rooted with magisk. I decided to update, so i used smart swich to do it (first mistake).
The software updated and got stuck to samsung logo.
After i flashed TWRP and installed magisk again, the phone did start, i did setup things etc.
Then it came the 2nd big mistake. I accidentally locked OEM with TWRP intalled (i forgot i didnt fully clean my phone from unwanted software before doing that).
Then my phone was looping because of FRP protection.
In the download mode it was telling me the Current binary was "custom".
I downloaded lastest rom from UDPATO and tried to flash the new fresh untouched ROM.
But i got an error SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 12, BINARY 5. After that, the CURRENT BINARY went to "Samsung Official" and instead of FRP protection bootloop i got stuck with the "An error has occured while updating the device software. Use Emergency recovery function in Smart Switch PC software." message.
I know what that means, I have a newer bootlaoder then the one i try to install, but did not find a post on this entire internet about bootloader version 12 on note 8!
I know I was dumb by locking the bootloader with twrp install in the first place, but there is any way to make it possible to flash the ROM via Odin?
I can't find a binary with version 12 of bootloader.
I can acces download mode, but anything else I do ends with the error: "An error has occured while updating the device software. Use Emergency recovery function in Smart Switch PC software."
This is the log from Odin.
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin engine v(ID:3.1401)..
<ID:0/020> File analysis..
<ID:0/020> Total Binary size: 6139 M
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Get PIT for mapping..
<ID:0/020> Firmware update start..
<ID:0/020> NAND Write Start!!
<ID:0/020> SingleDownload.
<ID:0/020> sboot.bin
<ID:0/020> param.bin
<ID:0/020> FAIL!
<ID:0/020>
<ID:0/020> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

You need to install oficial version with odin. Knox isnt work anymore.
Enviado desde mi Redmi Note 8 Pro mediante Tapatalk

marianofxp said:
You need to install oficial version with odin. Knox isnt work anymore.
Enviado desde mi Redmi Note 8 Pro mediante Tapatalk
Click to expand...
Click to collapse
I paid a subscription to UPDATO. They advertise that their firmware it is the original one...
Where can i get the official version of firmware?

Kheamers said:
I paid a subscription to UPDATO. They advertise that their firmware it is the original one...
Where can i get the official version of firmware?
Click to expand...
Click to collapse
Use samfirm.exe or frija to download the latest firmware for your phone (Both can be found in xda search).
The firmware will be official but knox will ALWAYS be tripped (0x1) meaning no more Samsung Pay and other knox related apps. No going back period!
As you noticed once on bootloader version 12 ("C") it won't accept any bootloader versions lower then 12. No going back to 11 or 10 or 9 or ..... No downgrading!

BluePhnx said:
Use samfirm.exe or frija to download the latest firmware for your phone (Both can be found in xda search).
The firmware will be official but knox will ALWAYS be tripped (0x1) meaning no more Samsung Pay and other knox related apps. No going back period!
As you noticed once on bootloader version 12 ("C") it won't accept any bootloader versions lower then 12. No going back to 11 or 10 or 9 or ..... No downgrading!
Click to expand...
Click to collapse
You guys just saved my day! Thanks, didnt knew about samfirm, or frija. Both are great tools.
Thank GOD for this community, this is the reason I AM NEVER GONNA HAVE ANOTHER IPHONE AGAIN.
I owned only 1, to see how it is, between androids.
Thank you guys again, Odin is doing his job on the background.
Great response time too!

Question Unbrick S21 Ultra

Had some issue during flashing, and the process got interrupted.
Now the phone is stuck on "An error has occured while updating the device software", can't get in to recovery or download mode.
Any advice would be appreciated.
Thanks.

k10n9 said:
Had some issue during flashing, and the process got interrupted.
Now the phone is stuck on "An error has occured while updating the device software", can't get in to recovery or download mode.
Any advice would be appreciated.
Thanks.
Click to expand...
Click to collapse
keep pressing on volume down and power and insert cable to get bootloader mode again

carlitobahsoun said:
keep pressing on volume down and power and insert cable to get bootloader mode again
Click to expand...
Click to collapse
it just keeps going back to this screen ""An error has occured while updating the device software""

k10n9 said:
it just keeps going back to this screen ""An error has occured while updating the device software""
Click to expand...
Click to collapse
ok ,repeat : once screen black , keep pressing volume up + key power and insert cable
dont panic , happend to me dont worry

thanks. managed to get it to download mode.
another issue arise, trying to flash via odin again but it says <ID:0/004> Re-Partition operation failed.

k10n9 said:
thanks. managed to get it to download mode.
another issue arise, trying to flash via odin again but it says <ID:0/004> Re-Partition operation failed.
Click to expand...
Click to collapse
than u are flashing uncorrect firmware....show me what firmware u are and what are u trying to flash

And u have to make sure u have repartition unchecked in odin

carlitobahsoun said:
than u are flashing uncorrect firmware....show me what firmware u are and what are u trying to flash
Click to expand...
Click to collapse
G998U1_XAA to G991U_TMB

sswagonman said:
And u have to make sure u have repartition unchecked in odin
Click to expand...
Click to collapse
repartition is unchecked

you cant flash s21 firmware to a s21 ultra

k10n9 said:
G998U1_XAA to G991U_TMB
Click to expand...
Click to collapse
What exactly are you trying to do? Flashing G998 to G991? Is that a mistype or are you actually trying to flash a different device firmware on your phone?

jerrycoffman45 said:
you cant flash s21 firmware to a s21 ultra
Click to expand...
Click to collapse
It's s21 ultra firmware:
Samsung Galaxy S21 5G Firmware Download SM-G991U Free Download
Samsung Galaxy S21 5G Firmware Download SM-G991U Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
enigmaamit said:
What exactly are you trying to do? Flashing G998 to G991? Is that a mistype or are you actually trying to flash a different device firmware on your phone?
Click to expand...
Click to collapse
I was having the VoLTE issue, and wanted to try this:
VoLTE not working since OneUI 4.0 Beta installation
Hello All, I posted this in Samsung Community, but unfortunately none was able to help. I am hoping XDA members could help fix this issue. I am facing a strange problem with my S21 Ultra Unlocked which was directly bought from Samsung. I had...
forum.xda-developers.com

no G991U_TMB is s21 firmware you need g998u or g998u1 firmware
G998U and G998U1 Firmware Links and Flashing Discussion Here
For those who aren't already aware, G998U is the model number of all of the US carrier versions of the S21 Ultra. The G998U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100%...
forum.xda-developers.com

jerrycoffman45 said:
no G991U_TMB is s21 firmware you need g998u or g998u1 firmware
G998U and G998U1 Firmware Links and Flashing Discussion Here
For those who aren't already aware, G998U is the model number of all of the US carrier versions of the S21 Ultra. The G998U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100%...
forum.xda-developers.com
Click to expand...
Click to collapse
ok. let me try again

Hi all,
I really need some help. I bricked my S21 Ultra. I bought it in Thailand and wanted to change it to German CSC. And it now shows on the screen "an error occured while updating the sofware".
Frst in red it was saying something ike
Hash of Data Does Not Match Digest in Descriptor​Now it only says "DEBORE :" nothing behind it....
I tried installing HOME_CSC_OXM_G998BOXM4BULI from HOME_CSC_OXM_G998BOXM4BVB1 (I entered all 4 flles in ODIN, ticked only Auto_Reboot and F.Rest Time ticked.
I cannot restart it or shut it off. It always come back to that screen.
Can anyone help?

In future you'll find that the error has occured screen is actually download mode it just displays a different screen. If you plug your phone in it registers and flashes fine from that screen.

GeeAyeZee said:
In future you'll find that the error has occured screen is actually download mode it just displays a different screen. If you plug your phone in it registers and flashes fine from that screen.
Click to expand...
Click to collapse
But I cannot flash with odin, I cannot go back anywhere (e.g. Factory Reset). What can I do? Do you have an Idea? Smart Switch does not have the recovery option...

those are the error messages in ODIN:
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> userdata.img
<ID:0/004> misc.bin
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 10626 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Added!!

Alex_Muc said:
those are the error messages in ODIN:
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> userdata.img
<ID:0/004> misc.bin
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 10626 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
make sure you get the latest firmware using frija and delete then reinstall latest drivers from samsung. use a different cable perhaps and a usb 2.0 port. If your quick you can access download mode by inserting the cable just as the phone reboots from button combo

GeeAyeZee said:
make sure you get the latest firmware using frija and delete then reinstall latest drivers from samsung. use a different cable perhaps and a usb 2.0 port. If your quick you can access download mode by inserting the cable just as the phone reboots from button combo
Click to expand...
Click to collapse
forget smart switch its useless

Please help!!! My phone is not working right now! Please help!

I tried to root my phone today and I failed and my phone is not working right now. Does anybody know how to fix it? Can someone please help me? Please!!! Thank you so much.

hxsports said:
I tried to root my phone today and I failed and my phone is not working right now. Does anybody know how to fix it? Can someone please help me? Please!!! Thank you so much.
Click to expand...
Click to collapse
My phone current is look like this. And I tried Odin flash and the process is failed.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 332 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

hxsports said:
My phone current is look like this. And I tried Odin flash and the process is failed.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 332 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
My phone stuck in Download mode right now and it shows
partition vbmeta
Reason vbmeta: Error verifying vbmeta image:
0_0INDIVLDUMT_EDRHS_IMTHSGAUEMSAC

if your phone won't boot because of verified boot, either flash back to stock or flash vbmeta_disabled.tar
if you tried to patch your boot.img this wouldn't really be a problem because magisk patches vbmeta for you when you patch.
if you tried to flash a magisk zip you should have followed instructions for twrp which requires flashing vbmeta_disable.tar in Odin. in other words you couldn't have followed instructions.

hxsports said:
I tried to root my phone today and I failed and my phone is not working right now. Does anybody know how to fix it? Can someone please help me? Please!!! Thank you so much.
Click to expand...
Click to collapse
bootloader is locked!! You got a US phone version, you can not Root neither install a custom Rom or TWRP.
Download the last official Rom for your phone, and flash it through Odin. Then your phone will work again.

3mel said:
if your phone won't boot because of verified boot, either flash back to stock or flash vbmeta_disabled.tar
if you tried to patch your boot.img this wouldn't really be a problem because magisk patches vbmeta for you when you patch.
if you tried to flash a magisk zip you should have followed instructions for twrp which requires flashing vbmeta_disable.tar in Odin. in other words you couldn't have followed instructions.
Click to expand...
Click to collapse
I can't flash anything into it because it say OEM lock and

hxsports said:
I can't flash anything into it because it say OEM lock and
Click to expand...
Click to collapse
flash the correct stock firmware for your phone and nothing else. if you have an American FE there's NOTHING ELSE that will work on it.

3mel said:
flash the correct stock firmware for your phone and nothing else. if you have an American FE there's NOTHING ELSE that will work on it.
Click to expand...
Click to collapse
Correct. There are sites, from where you may download the last available firmware for your phone!
Download it and flash it correctly with Odin, and it will work.
Download SM-G781U1 / Galaxy S20 Fan Edition 5G SM-G781U1 XAA in Samfw - Samsung firmware download
SM-G781U1 / Galaxy S20 Fan Edition 5G SM-G781U1 XAA samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Download the latest one for US version for this phone, currently they jumped to bootloader v.7
Carreful, I gave you a link for S20 FE 5G !! If you got S20 FE 4G, download the adequate one.