Hello all, I broke my screen on my redmi 4x and I already bought 2 lcd screens which at the end turned OEM manufuctured no matter what I bought them as original xiaomi . Can anyone tell me what is the main diferences between Original and OEM screens for that phone? One detail I believe is that the front touch buttons are barely visible on geniune screen where in OEMs' are fully visible. Am I wrong on that?
OEM stands for Original equipment manufacturer. So basically OEM = Xiaomi. both can be speak as original.
On original display the capacitive buttons are barely visible indoor but outdoor in sunlight they look like they lit up.
Not sure about aftermarket display, the color may vary since they are not original xiaomi display.
the easiest way to check display original or not is going into about phone -> tap several times on kernel version -> device view -> lcd.
mostly xiaomi uses display from ebbg/japan display and possibly some other manufacturer. now they also use display from samsung.
my Redmi 4X has ebbg display.
original display can be bought from service center.
you may get it on some online websites but i cant say anything about them if they are selling original display or not.
Related
https://goo.gl/photos/R1ns1GnFzMq26kSXA
I broke my touch screen and replaced touch screen at the authorized service center "TVS Electronics at Ashok Nagar Chennai" India on 22-Sep-015.
When I went home the phone did not turn ON but was heating at the back side top portion.
I went back to the service center and they reset the phone stating there was dust in the charging port. (What it has to with the switching off. I don't know) The issue came up again after a week. This time the service center kept the phone for observation and retuned it. They said they did not find any issue.
But I observed there are 6 led lights visible at the bottom of the phone. This is visible more in the white background. (I have enclosed a photo of this taken from another mobile)
I was told by the service center all MI3 phone comes with this type of bleeding because it is a low end phone. I am one did not notice this in the old screen. In the service center I checked one Redmi phone and it did not have this bleeding. Redmi is cheaper than MI3.
I would like to know
whether this bleeding
1] is a normal phenomena of the phone?
2] an occurrence happens with some of the touch screen? [If so can I demand them to replace?]
3] the service center employee replaced the screen with local make instead of original MI3 screen to make money?
Kindly help me.
Hey,
No its not that.
I think they just didn't their job right.
Although I read it in the reviews of the device that
Unfortunately, the brightness of the screen is uneven with the backlight source being pretty visible at the top of the screen. When you have a white page opened on the screen you can easily notice the gradual brightness falloff from top to bottom
Click to expand...
Click to collapse
That is on gsmarena.
I think the display is original but they did a lousy job.
Contact Xiaomi somehow and escalate the problem, ask the SC personnel to replace it properly and that you won't accept it like that. Its most probably a job screwed up.
Try replacing the screen urself. Order parts from online shopping websites.
They definitely did not fix it right and every mi3 dont come with this problem.
Hello all,
Today when i'm using my phone (Oneplus 3 T), after a normall "screen on" the display appears like in the image? I bought the phone at gearbest, and after contact oneplus.net, they say that gearbest are not an autorized resseler, so i have to pay them (Oneplus.net) to repair, even if i'm inside the warranty period. any sugestion on it?somebody has same problem?
Please see image bellow in attach,
Best Regards
mascp
Quick fix?
Just do a Google search with "oneplus3t screen static" and have a look at the thread on the OnePlus Forums that is displayed at the top. It will show you a quick fix The display is lying inside the aluminium frame, if the phone fails down, the frame is damaged and out of shape a bit, so u need to 'click' back the display inside the frame. Thus you have to press on the screen, around all the edges of the screen and then you hear and feel a distinct pop when the screen moves backwards into the case. And the static goes away.
mascpinto said:
Hello all,
Today when i'm using my phone (Oneplus 3 T), after a normall "screen on" the display appears like in the image? I bought the phone at gearbest, and after contact oneplus.net, they say that gearbest are not an autorized resseler, so i have to pay them (Oneplus.net) to repair, even if i'm inside the warranty period. any sugestion on it?somebody has same problem?
Please see image bellow in attach,
Best Regards
mascp
Click to expand...
Click to collapse
Hello fellow users,
I have the Chinese version of the Reno, the PCAM00. One night I dropped the phone on the stairs, taking some real damage to the back panel and to the display. The LCD cracked, but the touch panel stayed in one piece . I replaced the screen by myself, I did a lot of screen replacements for other phones until now. Now I got this issue: the fingerprint sensor is not recognized anymore; I opened the phone again to be sure that I connected the under screen camera, all was in good order. After this re check, trying to set up at least one security check- except the password- because the phone is quite big and a 6 char password can be seen by near people, I tried to set up the face unlock. Still nothing, when I try to enroll a new face, the camera pops up and quickly retracts saying just "Sorry. Unable to enroll. Please retry." . The phone has this function, I enabled it in the past, but because is quite awkward to have the camera moving every time you unlock the phone, I disabled it.
Is it possible that the security functions are disabled by software? Have anyone encountered this issue? Is there a fix to it?
Note: I bought the display from aliexpress and the product description was "Original M&Sen 6.4" For Oppo Reno AMOLED LCD Display Screen+Touch Panel Screen Digitizer For OPPO Reno Display"
Any help would be greatly appreciated.
Hi, I broke the display. I put a new one and here the problem is - the backlight is on, but there is no picture. I assume that need to put some kind of driver on the display. But I don’t know how to do it. I was a pixel experience 10 . Miflash stitched the official global miui. But this did not work. This is either display or driver. Because my old broken screen shows signs of life there are just a lot of artifact and purple stripes. Please any help?
ps sorry for my english
The new screen is dead, buy another one.
My K20 Pro's display was broken (completely black screen)
Authorized service center told me they charge Rs-9300/- (Indian rupees) for the screen replacement.
(7499 (Screen cost) + 1350 (GST) + 500 (Service charge) )
Will it work fine as normal if I change in authorized center.
If any one had similar experience please guide me.
Thanks in advance!
Yes it should work all fine. I change them my self on any phone and there is no confusion about it. You get replacement screen. What that meens is that is original display. The whole unit of the screen. Whole unit meens amoled display with glass. Touchscreen is not glass. The glass is only glass which is a protection of the whole unit. Touchscreen is build in in amoled as a layer which sits underneath polarizer. There is no confusion and no extra thought you should deal with. Just do it. If you can change your self then change your self.