Hi guys ive got a Galaxy Tab S -SM-T719Y
Build: NRD90M.T719YDXU2BRB2
Ive used odin nd its come back as passed - but them the tab is not rooted, waht am i doing wrong?
Ive used the correct binary file..
\T719YDXU2BRB2_T719YOLB2BRB2_THL\T719YDXU2BRB2_T719YOLB2BRB2_T719YDXU1BRA1_HOME.tar.md5
Any hep is greatly appreciated
Ive copied in the log here below
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 3541 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> modem.bin
<ID:0/007> adspso.bin
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> hyp.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> sec.dat
<ID:0/007> cmnlib.mbn
<ID:0/007> keymaster.mbn
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Do these simple app methods actually work?
I absolutely need to root my tab ASAP. Like in the next few hours.
What's the easiest way. Even if I have to pay.
AD8T8 said:
I absolutely need to root my tab ASAP. Like in the next few hours.
What's the easiest way. Even if I have to pay.
Click to expand...
Click to collapse
You think the stock firmware roots your device?
It's a two-step process: Use ODIN to flash the appropriate version of TWRP then use TWRP to flash Magisk.
tjupille said:
It's a two-step process: Use ODIN to flash the appropriate version of TWRP then use TWRP to flash Magisk.
Click to expand...
Click to collapse
Hi sorry for being totally useless with this - so how do i do this, ive look ed online for instructions but find very little that actually explains step by step how to do it.
how do i use odin to flash TWRP, and what is the appropriate version?
and then how do i use TWRP to Flash Magisk (what is majisk by the way?)
Thanks a lot for your help and time..
A
I'll make the snide comment that it doesn't seem like you looked very hard: the best source of information is right here.
Ok,rant completed. Check this thread for very detailed instructions on how to install TWRP using ODIN:
https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
Once you have installed TWRP in place of the stock recovery, you can use it to flash Magisk, which will give you root. As with TWRP, the instructions are here on XDA:
https://www.xda-developers.com/how-to-install-magisk/
Related
Hello everbody,
im relative new to this theme. I've got a problem. When i plug in my SGN there is a message "Firware upgrade encountered an issue. Please select Recovery mod in Kis & Try again." but every 5 seconds i hear a sound from windows "unplug" "plug" etc... and the screen message --> black --> message --> black etc..
when i try to start odin mode it shows: "low battery!! can't download"
thx for help
ok found a way to load it.
next problem: trying to flash with odin3 v1.85:
odin always stuck at hidden.img.. why?
log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA6_N7000OXXLA1_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
<ID:0/007> hidden.img
Just use different version of Odin (Like v1.83) Definitely it ll work.
tried with Odin3 v1.83 now:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> factoryfs.img
<ID:0/007> hidden.img
same problem.. i think 30 mins only for hidden.img is toooo long
Then first you need to update your Kies. And USB Drivers too. Or else use different PC to flash.
latest kies version is installed. how can i check for latest usb drivers?
is there anyway to return to original stock firmware?
lol4it said:
latest kies version is installed. how can i check for latest usb drivers?
Click to expand...
Click to collapse
Here you go - check THIS thread for latest USB drivers...
lol4it said:
is there anyway to return to original stock firmware?
Click to expand...
Click to collapse
If you want Stock GB ROM, then u have to flash using Odin. Try with different PC and different USB Cable.
Hi,
i realy need your help with rooting of my device Samsung galaxy s 3 mini GT-i8190N.
I use this thread for root: http://forum.xda-developers.com/showthread.php?t=2030282
Problem is when i start with odin then it writte:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8190XXAMG1_I8190OXXAMG1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> modem.bin
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What i can do next? Please help me someone!!!
try this:
download both files, then:
flash the md5 as pda in odin, then copy the zip to internal memory, reboot and use cwm to apply it.
https://copy.com/rnnnLYvwfZKI
https://copy.com/NrS4O7kU04ma
press thanks if i helped!
It fail because you're trying to flash a i8190 modem to a i8190N.
Download a pre rooted ROM for i8190N, or flash only custom recovery and SuperSU.zip.
Sent through time and space from my s3mini/CM11
tys0n said:
It fail because you're trying to flash a i8190 modem to a i8190N.
Download a pre rooted ROM for i8190N, or flash only custom recovery and SuperSU.zip.
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
thats what i said, and i even posted links!
Kobro said:
thats what i said, and i even posted links!
Click to expand...
Click to collapse
Yes you did. I just added an explanation to why it failed.
Sent through time and space from my s3mini/CM11
I tried rooting a Note 4 (N910T that came with 5.1.1) following the easy steps pinned in the general section. I was able to install the recovery but Something failed after the CF root script. Because I got stuck in a boot loop. I then wiped the cache partition and tried rebooting. The same issue persists. So I downloaded the stock firmware (N910TUVU2DOK2_N910TTMB2DOK2_TMB) and tried flashing that in Odin 3.10.7. During the process I received.
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
After that, I'm no longer able to boot into TWRP recovery. I get a message about a failed firmware update nor does the OS boot up.
I can still boot into download mode. And I'm able to flash TWRP from ODIN. Although after booting into TWRP and trying to do a wipe. It complains that' it's unable to mount the /system partition.
Could Someone give me a quick hand? I work in IT and I know how to google. So there shouldn't be much hand holding. Thanks in advance.
It was the damn cable. Either the cable or the usb port. I switched both at the same time. The cable I was using was an "OEM" from amazon. That I used to back up the device and flash the recovery. But for some reason it would fail at the step above.
After I swapped to my real OEM usb cable, I was able to flash the rom I was able to.
Not sure I want to try the root again. Anyone have solid instructions on rooting 5.1.1 on the N910T?
Hello all
I m trying to flash 5839i ROM downloaded from sammobile but no way error :
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> BcmCP.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Check ODIN Version
i3abaji said:
Hello all
I m trying to flash 5839i ROM downloaded from sammobile but no way error :
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> BcmCP.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This normally should not happen but you should download the odin 3.07 and the .ops file for your model ONLY. Attach the .ops file in your reply. Choosing an incorrect .ops file will result in a brick:crying:
thanks going to try with odin 3.07 and will let you know here! thanks in advance
I want reflash a stock rom to my SM-T815, but i get a fault. The Rom is T815XXU2CRA3_T815DDX2CQI1_DTM with Odin 3.12.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After that i can flash TWRP without any Problem. Can somebody help me to bring the Stock rom in my Tab?