So I fully bricked my phone it doesn't power on, basically it's stuck in edl mode, do I tried to flash the latest fastboot rom with mi flash tool but I'm getting cannot receive hello package error. Anyone familiar with EDL mode please help my phone is an actual brick. Thanks
Update: I found an easy solution just needed an authorized account. Anyone who need the info on the guys who had the account just PM me. It costed me $12USD
Did you try to install twrp? maybe at least you can install a rom using twrp...
It's interesting how you bricked it.
That error happened to me with my Mi A2 and the problem was that the fastboot package was in a different partition/HDD so I moved it to C: drive (or the partition/HDD where ur OS is installed) and problem solved.
So maybe that's ur problem.
Press power button for 15 seconds
Kollachi said:
It's interesting how you bricked it.
Click to expand...
Click to collapse
Did he say how he bricked it or are you being sarcastic?
Yesterday i have this problem too, 5 minutes i tried to turn on and works.
Aybouzaglou said:
So I fully bricked my phone it doesn't power on, basically it's stuck in edl mode, do I tried to flash the latest fastboot rom with mi flash tool but I'm getting cannot receive hello package error. Anyone familiar with EDL mode please help my phone is an actual brick. Thanks
Click to expand...
Click to collapse
I had this issue with Mi A1, though, the only solution I think there is:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Either hold the power button to power-cycle it and keep on trying, or do a test-point reset. Otherwise... Send it back to the store where you bought it, they'll fix it for you/give you a new phone.
jhs39 said:
Did he say how he bricked it or are you being sarcastic?
Click to expand...
Click to collapse
Nope he didn't say anything and I'm not sarcastic.
Aybouzaglou said:
So I fully bricked my phone it doesn't power on, basically it's stuck in edl mode, do I tried to flash the latest fastboot rom with mi flash tool but I'm getting cannot receive hello package error. Anyone familiar with EDL mode please help my phone is an actual brick. Thanks
Click to expand...
Click to collapse
Well..can you update us how its going?
Skickat från min MI 9 via Tapatalk
superior8888 said:
Well..can you update us how its going?
Skickat från min MI 9 via Tapatalk
Click to expand...
Click to collapse
So basically I had to get an authorized xiaomi account to flash in mi flash with EDL mode, I found these Indian tech guys online who had an authorized account for 12$
They logged in to my PC with temviewer and typed in their mi account and it worked like charm!
Tip for anyone like me in this situation, in order to trigger the EDL mode you have to hold on to power and volume up then while still holding plug into PC then let go. Then you have 15 seconds to press flash before it turns off, that's why I was getting the hello packet error because the EDL mode wasn't triggerd
Qidamin said:
Did you try to install twrp? maybe at least you can install a rom using twrp...
Click to expand...
Click to collapse
It was fully dead, like not even a pixel was working lol
Kollachi said:
It's interesting how you bricked it.
Click to expand...
Click to collapse
I was on Q Beta and resored pie using twrp, this seemed to trigger the roll back security because I didn't use Mi flash. So basically the phone was fully dead. Only EDL mode was Working
SmallTarzan said:
I had this issue with Mi A1, though, the only solution I think there is:
Either hold the power button to power-cycle it and keep on trying, or do a test-point reset. Otherwise... Send it back to the store where you bought it, they'll fix it for you/give you a new phone.
Click to expand...
Click to collapse
Yes exactly, but you also need an Authorized Xiaomi Account to even restore with EDL mode.
On mi 9 you have to hold power and volume up then plug in while still holding then let go and it accepted the package, after you still have to type in the authorized account.
Aybouzaglou said:
So basically I had to get an authorized xiaomi account to flash in mi flash with EDL mode, I found these Indian tech guys online who had an authorized account for 12$
They logged in to my PC with temviewer and typed in their mi account and it worked like charm!
Tip for anyone like me in this situation, in order to trigger the EDL mode you have to hold on to power and volume up then while still holding plug into PC then let go. Then you have 15 seconds to press flash before it turns off, that's why I was getting the hello packet error because the EDL mode wasn't triggerd
Click to expand...
Click to collapse
Ah, not a noob mistake after all. I'm happy it worked out for you. Never restore again [emoji23] thanks for the update.
Skickat från min MI 9 via Tapatalk
superior8888 said:
Ah, not a noob mistake after all. I'm happy it worked out for you. Never restore again [emoji23] thanks for the update.
Skickat från min MI 9 via Tapatalk
Click to expand...
Click to collapse
Haha yes I was panicking, like 450$ in the trash dosen't feel good lol. But the feeling when I fixed it was amazing so maybe it was worth it ?
i have de same probleme but i can t flash. i have 1 error.sometime he is onport com 5 and soùme time not recognized.Can you help me?
ericb01 said:
i have de same probleme but i can t flash. i have 1 error.sometime he is onport com 5 and soùme time not recognized.Can you help me?
Click to expand...
Click to collapse
Pm me
ericb01 said:
i have de same probleme but i can t flash. i have 1 error.sometime he is onport com 5 and soùme time not recognized.Can you help me?
Click to expand...
Click to collapse
Change the PC with WIN10
i m read too pay 12 $ ..what is the procédure..i speaker juste a littéralement english
Related
hello guys , i'm just a newbie and my english is worst , sorry for any mistake that i might make :crying: and thanks for reading my thread
thing is i tried to flash stock rom on my nokia 8 with online service tool (6.0.4) but in the middle of load , the software not responding and after 30 minutes and it said the process was failed
now my nokia 8 stuck at download mode and can't enter recovery mode or boot system ( my computer still be able to detect my phone but in fastboot mode ) , i tried to reflash with online service tool but with newer version (6.1.2) but when " rebooting bootloader " it restart my phone and it's still stuck at download mode and on computer it's said ht-tps://imgur.com/PDvUDfM now my phone look like this ht-tps://imgur.com/a/QFfZu ( sorry i'm new register , so i can't upload the picture =(( )
i tried QFIL but it cannot detect the port and said " no port" , installed driver but i still can't detec the port
thanks again for reading my post , and please help me =(( i contacted the nokia support and they told me to take the phone to repair center , and when i take to repair center , they said that i need to change my mainboard because it's dead or broken something like that , i just bought this phone a week .
Exactly the same occurred to my Nokia 6. Trying to hard-reset it I began playing with the vol and power keys, with and without the USB charger cable, and now it shows just a blue light or led at the upper left corner.
What ur model ? Only 1052 can use ost tool.
Are u see the tool flash partion system ?
Are u use edit firmware method ?
For easy guild... Use ntool with donate money.
Or.... Fasstbooot flash all file in firmware.
I had the similar boot problem. After my phone discharging i connect to charger and phone stuck on that message : Yourd device cant be checked for corruption. I have unlocked bootloader and installed android pie latest.
Is there any hope people or phone i dead?
I cant boot in download mode via fastboot cause i get message : no emulators found. How to solve that?
Is there any hope?
Anybody people?
How to turn off phone people?!! Its impossible it cant turf off!
Allek84 said:
How to turn off phone people?!! Its impossible it cant turf off!
Click to expand...
Click to collapse
Hold the volume keys and power key at the same time for as long as u can....maybe even a few minutes until it shuts down. If all else fails let it drain then boot to recovery and gfix whatever caused the boot hang
Its drained just before 30 minutes, and now the view is that
I cant boot to recovery neither to dowload
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nokia 7 plus using Tapatalk
MDV106 said:
Hold the volume keys and power key at the same time for as long as u can....maybe even a few minutes until it shuts down. If all else fails let it drain then boot to recovery and gfix whatever caused the boot hang
Click to expand...
Click to collapse
You are king thanks a lot i got it.
I must to press and hold every 3 keys(volume up,down and power) for few minutes and phone turn off. After that i could enter in recovery
Thanks again.
Sent from my Nokia 7 plus using Tapatalk
Allek84 said:
You are king thanks a lot i got it.
I must to press and hold every 3 keys(volume up,down and power) for few minutes and phone turn off. After that i could enter in recovery
Thanks again.
Click to expand...
Click to collapse
Glad I could help :good:
Hi everyone!
I've got similar problem to that. My device shows: "Your device can’t be checked for corruption. Please lock the bootloader”. I tried to fix that with OST, but no succes - critical unlock is neccesary. I've flashed with OST 6.04, 6.12, NOST 0.6, but nothing works. Also the ADB and QFIL can't see the device, so I can not critical unlock bootloader. In the device manager, phone is seen as ADB Interference -> fastboot Device, and after installing google driver as Android ADB Interference. Recovery and fastboot modes don't work, download mode works only after connecting with OST. I tried holding 3 keys, but phone turns off after about 20s and nothing happen - I can't enter recovery. I bought this device recently and some time later after turning on it showed that statement. The varranty has expired, so I can't send it to service.
I hope you can help me.
porsche96 said:
Hi everyone!
I've got similar problem to that. My device shows: "Your device can’t be checked for corruption. Please lock the bootloader”. I tried to fix that with OST, but no succes - critical unlock is neccesary. I've flashed with OST 6.04, 6.12, NOST 0.6, but nothing works. Also the ADB and QFIL can't see the device, so I can not critical unlock bootloader. In the device manager, phone is seen as ADB Interference -> fastboot Device, and after installing google driver as Android ADB Interference. Recovery and fastboot modes don't work, download mode works only after connecting with OST. I tried holding 3 keys, but phone turns off after about 20s and nothing happen - I can't enter recovery. I bought this device recently and some time later after turning on it showed that statement. The varranty has expired, so I can't send it to service.
I hope you can help me.
Click to expand...
Click to collapse
Try to unlock bootloader after connect to download mode with OST(if is somehow possible)unlock him then download Nougat or Oreo firmware only from here and try to flash with OST or NOST,butt preffered NOST.
https://tpedutw-my.sharepoint.com/p...CTID=0x0120007F0E21D15C09464184D190CC235B0516
Hi all, this happened because I tried to downgrade my phone's firmware from Pie (2019-05 security patch) to 8.1.1 using the zip file in this thread. I did it once with stock recovery, unlocked the bootloader successfully and installed TWRP 3.2.3-1-NB1, then updated via OTA to Pie.
Then I tried to downgrade again using TWRP and after the reboot the phone was stuck on 9008 mode.
I'm trying to reflash it using OST 6.0.4 but it just says "Please connect your phone"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So the big question is. How do I revive my phone? Thanks in advance for any replies.
Angcrad said:
Hi all, this happened because I tried to downgrade my phone's firmware from Pie (2019-05 security patch) to 8.1.1 using the zip file in this thread. I did it once with stock recovery, unlocked the bootloader successfully and installed TWRP 3.2.3-1-NB1, then updated via OTA to Pie.
Then I tried to downgrade again using TWRP and after the reboot the phone was stuck on 9008 mode.
I'm trying to reflash it using OST 6.0.4 but it just says "Please connect your phone"
So the big question is. How do I revive my phone? Thanks in advance for any replies.
Click to expand...
Click to collapse
Remove OST LA and install NOST,start the program, and when the phone turned off press and hold volume down button and turn on phone while pressing volume down,it goes to download mode,than select firmware and select method of flashing called Emergency mode and Factory reset and try to flash.It need few minutes for flashing.
Allek84 said:
Remove OST LA and install NOST,start the program, and when the phone turned off press and hold volume down button and turn on phone while pressing volume down,it goes to download mode,than select firmware and select method of flashing called Emergency mode and Factory reset and try to flash.It need few minutes for flashing.
Click to expand...
Click to collapse
Thanks for the info. How do I turn the phone off? I know it is in a powered state because Windows sees it as QDLoader 9008, but the screen is dark, the backlight is off and when I try to charge it, it seems dead.
Angcrad said:
Thanks for the info. How do I turn the phone off? I know it is in a powered state because Windows sees it as QDLoader 9008, but the screen is dark, the backlight is off and when I try to charge it, it seems dead.
Click to expand...
Click to collapse
Try to press and hold all tree buttons for 3/4 minutes .
Sent from my TA-1012 using Tapatalk
Allek84 said:
Try to press and hold all tree buttons for 3/4 minutes .
Sent from my TA-1012 using Tapatalk
Click to expand...
Click to collapse
Tried holding down the 3 buttons for 5 minutes, phone is still powered ond (even though screen shows nothing) I know it is still drawing a current because it gets warm if I keep it in its box.
Will try with NOST later. Thank you
Nokia 8 stuck 9008 edl
Angcrad said:
Hi all, this happened because I tried to downgrade my phone's firmware from Pie (2019-05 security patch) to 8.1.1 using the zip file in this thread. I did it once with stock recovery, unlocked the bootloader successfully and installed TWRP 3.2.3-1-NB1, then updated via OTA to Pie.
Then I tried to downgrade again using TWRP and after the reboot the phone was stuck on 9008 mode.
I'm trying to reflash it using OST 6.0.4 but it just says "Please connect your phone"
So the big question is. How do I revive my phone? Thanks in advance for any replies.
Click to expand...
Click to collapse
Install firmware usnig QFile tool
Search google Nokia 8 firmware
Open firmwarex
Angcrad said:
Hi all, this happened because I tried to downgrade my phone's firmware from Pie (2019-05 security patch) to 8.1.1 using the zip file in this thread. I did it once with stock recovery, unlocked the bootloader successfully and installed TWRP 3.2.3-1-NB1, then updated via OTA to Pie.
Then I tried to downgrade again using TWRP and after the reboot the phone was stuck on 9008 mode.
I'm trying to reflash it using OST 6.0.4 but it just says "Please connect your phone"
So the big question is. How do I revive my phone? Thanks in advance for any replies.
Click to expand...
Click to collapse
Yo tengo la solucion,
Critical bootloader
Hi guys, I'am in same boat as Angcrad. I tried the NOST but when I flash it says that "Your phone is protected to flash unprotected software. Is your bootloader unlocked to critical?" What does this mean?
Angcrad said:
Tried holding down the 3 buttons for 5 minutes, phone is still powered ond (even though screen shows nothing) I know it is still drawing a current because it gets warm if I keep it in its box.
Will try with NOST later. Thank you
Click to expand...
Click to collapse
@Angcrad
Hey man, have you had any luck with your Nokia 8?
I'm having the same problem with a 1 year dead Nokia 8 :'(
holding down the 3 buttons and plug your usb
Problem Solved
Nokia 8 -Ta 1004
I tried to root my redme note 9 using magdisc from pc. after completing all steps, I have given command to boot recovery through minimal adb, after that phone automatically moved from Fastboot mode and started blinking REDME on screen, a few moments later it goes black and again appear. it keeps continuing now. I tried long press on the power button for restart/switch off, but no use, it will vibrate and ON with redme logo, and will go black after few moments. i tried to enter into fast boot mode, but result is same, it will vibrate and go OFF, when I tried to connect pc, pc is not recogonizing this phone anymore. nothing is working, cant even switch off
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, i have the same issue here, but just after trying to update pixelUI official.... infinite bootloop on miui logo, no fastboot, no recovery and not detected on the PC. Installed MTK drivers but nothing more... THX
Did you try to flash something?
Yep! upgrade from pixelUI official 3.7 to 3.8, had some intempestive reboot, so i swype and re-install and seen that, infinite boot loop, no recovery, no fastboot and phone isn't recognize by PC...
So i can't use SPflash tool to install stock rom...
Sometimes PC see the phone realy realy fast son i don't have time to verify in device manager..
Thanks for your fast response!
Install usb drivers and then force flashing using spflashtool.
thrasholiv said:
Hello, i have the same issue here, but just after trying to update pixelUI official.... infinite bootloop on miui logo, no fastboot, no recovery and not detected on the PC. Installed MTK drivers but nothing more... THX
Click to expand...
Click to collapse
i was trying to root my phone by magisk, but now the issue is solved, I tried SP flash tool
VD171 said:
Install usb drivers and then force flashing using spflashtool.
Click to expand...
Click to collapse
yes I tried this, now issue is solved
SP flash tool give me an error message "STATUS_BROM_CMD_FAIL", so i must use EDL but when i try "
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE"Even after install and uninstall many version of python, when i try to execute "cdc-acm.inf" as administrator a prompt tell my python is not found...
THX for your answers!
guys i have the same issue. do anyone help me to recover. Please join with my on any screen sharing platforms so i can solve my issue. thanks
VD171 said:
Install usb drivers and then force flashing using spflashtool.
Click to expand...
Click to collapse
How can I do that, to force flashing using sp flash tool? something similar happens to me only that it does not turn on and when I connect it to the pc comes out the following error that I will attach an image and translate:
'usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.'
what can i do in that case?
afyjaslam said:
I tried to root my redme note 9 using magdisc from pc. after completing all steps, I have given command to boot recovery through minimal adb, after that phone automatically moved from Fastboot mode and started blinking REDME on screen, a few moments later it goes black and again appear. it keeps continuing now. I tried long press on the power button for restart/switch off, but no use, it will vibrate and ON with redme logo, and will go black after few moments. i tried to enter into fast boot mode, but result is same, it will vibrate and go OFF, when I tried to connect pc, pc is not recogonizing this phone anymore. nothing is working, cant even switch off
View attachment 5387173
Click to expand...
Click to collapse
hey man did you fixed it and how pls tell me thanku
ahmadLiaqat2839 said:
guys i have the same issue. do anyone help me to recover. Please join with my on any screen sharing platforms so i can solve my issue. thanks
Click to expand...
Click to collapse
hey did you fixed the problem bro and how
hey i have the same problem with my redmi note 9 pro please help
VD171 said:
Install usb drivers and then force flashing using spflashtool.
Click to expand...
Click to collapse
hello there, my redmi note 9 just got updated to miui 13 and for some time it sudenly freezes and not its in bootloop and i cant go to recovery mode nor fastboot, what do i need to do to fix this?
br
pembasherpa01 said:
hey did you fixed the problem bro and how
Click to expand...
Click to collapse
man did you get it fixed? please I would like to know
Any news on this?
I briked my phone.. cycling boot logo, cannot get to fastboot, cannot get to recovery, EDL does not work and the phone does not even show up in computer...
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
assistance... you have lost warranty. anyway you can try this metod (work with my old mia3 but have a qualcomm chipset)
first: CLOSE YOUR PHONE!
install mi pro flash tool https://www.androidfilehost.com/?fid=14943124697586360238
PRESS power+ vol up+vold -
connet to pc via USB
OPEN MIflash tool pro
if your phone will be recognized you can flash stock firmware
with miflash pro you can install all drivers you need (but i'm not sure, test by yourself)
good luck.
if this procedure don't work go to an assistance point. you have damaged the bootloader
before mod devices with a/b partitions is very important read guides with attention. if you don't want trash a new device
you can also try sp flash tool, specific for mtk devices
How-to flash or install Stock ROM (Firmware) using SP Flash Tool
Step-by-Step guidelines to flash or install Stock ROM (Scatter Firmware) on Mediatek devices using the SP Flash Tool.
androidmtk.com
tannedcan said:
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated! View attachment 5431881
Click to expand...
Click to collapse
did you even open it? tannedcan in every single post where there are instructions how to root/unlock/change rom
there is a DISCLAIMER for a reason.
that msg remark that you can brick your device if you dont know what you are doing or if you have doubts!
most of times things can be recovered but NEVER open a device in warranty.
simika said:
did you even open it? tannedcan in every single post where there are instructions how to root/unlock/change rom
there is a DISCLAIMER for a reason.
that msg remark that you can brick your device if you dont know what you are doing or if you have doubts!
most of times things can be recovered but NEVER open a device in warranty.
Click to expand...
Click to collapse
yes, i'm 100% agree with you
tannedcan said:
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated! View attachment 5431881
Click to expand...
Click to collapse
I was exactly in same trouble, use This guide that solve the issue.
How to flash an MTK secure boot device without a custom DAThis is a step by step guide showing how to flash a Mediatek (MTK) secure boot device without using a custom download agent (DA). A little history Secure Boot M
forum.hovatek.com
Press mobile three buttons and connect cable to pc (use USB 2.0) to enter BROM mode (are like ERL mode in Snapdragon models). Because mtk models don't have test point. So don't need to disarm mobile.
Did you find the solution?
please any solution? i am into same problem. need stock rom for
Redmi Note 10 5G choppin
Zaiserr2 said:
I was exactly in same trouble, use This guide that solve the issue.
How to flash an MTK secure boot device without a custom DAThis is a step by step guide showing how to flash a Mediatek (MTK) secure boot device without using a custom download agent (DA). A little history Secure Boot M
forum.hovatek.com
Press mobile three buttons and connect cable to pc (use USB 2.0) to enter BROM mode (are like ERL mode in Snapdragon models). Because mtk models don't have test point. So don't need to disarm mobile.
Click to expand...
Click to collapse
this really helped, thanks but only with usb 3.0
tannedcan said:
Hi all, dumbass me was so excited to get a new phone, I went around Redmi Note 10 ROMs on my Note 10 5G and bricked it... It won't boot into fastboot or recovery. When I boot it up holding the up/power buttons, the screen lights up and phone gets briefly recognized by my computer before rebooting. I've done some digging around and tried to find edl point? of this phone but couldn't get far. Any help would be appreciated! View attachment 5431881
Click to expand...
Click to collapse
same issue sir my device show handshake failed during flashing
wetito said:
assistance... you have lost warranty. anyway you can try this metod (work with my old mia3 but have a qualcomm chipset)
first: CLOSE YOUR PHONE!
install mi pro flash tool https://www.androidfilehost.com/?fid=14943124697586360238
PRESS power+ vol up+vold -
connet to pc via USB
OPEN MIflash tool pro
if your phone will be recognized you can flash stock firmware
with miflash pro you can install all drivers you need (but i'm not sure, test by yourself)
good luck.
if this procedure don't work go to an assistance point. you have damaged the bootloader
before mod devices with a/b partitions is very important read guides with attention. if you don't want trash a new device
you can also try sp flash tool, specific for mtk devices
How-to flash or install Stock ROM (Firmware) using SP Flash Tool
Step-by-Step guidelines to flash or install Stock ROM (Scatter Firmware) on Mediatek devices using the SP Flash Tool.
androidmtk.com
Click to expand...
Click to collapse
is it okey or I'm the only one whose phone just keeps getting recognized and unrecognized by the PC every 5-10 sec ????
even though i have tried same with diffrent PCs and diffrent cables
PLEEEEEEEEEEEEASE HELP because this is by far the biggest obstacle I had in this precedure
It is not OK, you are the only one
Start from BROM mode and proceed from there.
viktak said:
It is not OK, you are the only one
Start from BROM mode and proceed from there.
Click to expand...
Click to collapse
I appreciate your response but
i did it all
i already have python the last version
i downloaded the MTK driver
i pressed the whole 3 buttons in the phone connected to PC (the phone didn't give any output at all)
i did set it up (which does appear and dissapear in every 5secs so I had to be quick)
then for the main.py file didn't capture the phone (obviously because I constantly hear the devices get recognized and unrecognized and nor the cable nor the PC are the cause
the theeere I am, stuck in the very 1st step.
please I would be so thankful if you could diagnose the problem just for me to know what to do.
personally I don't think it's a phone hardware problem because back in the days lol i unlocked bootloader and installed recovery, all was very functional and everything responded smoothly
if you wanted to know any other detail i would be so pleasured to tell you
I don't have the time now. Earliest I can help you is on Monday. Send me a PM to arrange for it.
viktak said:
I don't have the time now. Earliest I can help you is on Monday. Send me a PM to arrange for it.
Click to expand...
Click to collapse
alright, appreciate it
thank you
pardon my abbreviations knowledge but I really don't know what a PM is
Did anyone found the way to back the phone to life???
If anyone can respond me quickly I will apreciate it.
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
viktak said:
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
Click to expand...
Click to collapse
Ok, I will see
viktak said:
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
Click to expand...
Click to collapse
I have a problem, I can't make it work, not even the fastboot or MTK tools
viktak said:
Yes, it's quite easy. Just follow my guide on my blog. DM for details.
Click to expand...
Click to collapse
post a link to your blog
viktak said:
I don't have the time now. Earliest I can help you is on Monday. Send me a PM to arrange for it.
Click to expand...
Click to collapse
i need help on this very issue pls help meee
I have bricked Mi 11 Ultra 12/512 CN version. Cant enter Recovery, also it has locked bootloader.
What amazes me, I paid for EDL flash, it didn't work. Phone just bootloops 10 times and gets in fastboot again.
Also, i tried shorting pins method to enter EDL, in unofficial service store, that didnt help too.
My phone has a different problem.
Does anyone know how to fix my phone, would motherboard replacement help? (Its hard to find them too).
Official Xiaomi service in EU cant fix my phone because of Chinese IMEI, they dont have support for it.
Selling phone for parts doesnt work too, because no one wants to sink money into new expensive phone.
Skayzee said:
I have bricked Mi 11 Ultra 12/512 CN version. Cant enter Recovery, also it has locked bootloader.
What amazes me, I paid for EDL flash, it didn't work. Phone just bootloops 10 times and gets in fastboot again.
Also, i tried shorting pins method to enter EDL, in unofficial service store, that didnt help too.
My phone has a different problem.
Does anyone know how to fix my phone, would motherboard replacement help? (Its hard to find them too).
Official Xiaomi service in EU cant fix my phone because of Chinese IMEI, they dont have support for it.
Selling phone for parts doesnt work too, because no one wants to sink money into new expensive phone.
Click to expand...
Click to collapse
When in fastboot mode, flash the stock rom your phone came with.
Samdaja said:
When in fastboot mode, flash the stock rom (fastboot version) your phone came with using MiFlash tool.
Click to expand...
Click to collapse
When you do that, MiFlash asks you for authorized account. You cant flash alone using MiFlash if the bootloader is locked.
Skayzee said:
When you do that, MiFlash asks you for authorized account. You cant flash alone using MiFlash if the bootloader is locked.
Click to expand...
Click to collapse
If fastboot devices shows ur phone, use the fastboot version of the stock rom to flash via Fastboot
Samdaja said:
If fastboot devices shows ur phone, use the fastboot version of the stock rom to flash via Fastboot
Click to expand...
Click to collapse
Fastboot devices command doesn't show my device. Device is only visible when you get it in EDL (emergency download) mode. And tried flashing 3 times, every time it boots up to fastboot...
Skayzee said:
Fastboot devices command doesn't show my device. Device is only visible when you get it in EDL (emergency download) mode. And tried flashing 3 times, every time it boots up to fastboot...
Click to expand...
Click to collapse
Best to send the phone back to china to be repaired if that is an option.
Samdaja said:
Best to send the phone back to china to be repaired if that is an option.
Click to expand...
Click to collapse
Thanks, i have some friend travelling from my country to China now and then so i will see what i can do.
Can you explain what exactly you've done?
from what you said I understand that you've flashed a different rom and locked boot loader. and now it is stuck in bootloop and fastboot. is that correct?
as long as you can go to fastboot. have you tried to unlock bootloader again your official unlock tool? happened with me and it worked, once unlocked bootloop stopped and device ran into system straight away. as simple as that. and yes, with non official rom installed and locked bootloader.
if you can explain to us a bit more from the beginning that would be more helpful.
hassanaliyeh said:
Can you explain what exactly you've done?
from what you said I understand that you've flashed a different rom and locked boot loader. and now it is stuck in bootloop and fastboot. is that correct?
as long as you can go to fastboot. have you tried to unlock bootloader again your official unlock tool? happened with me and it worked, once unlocked bootloop stopped and device ran into system straight away. as simple as that. and yes, with non official rom installed and locked bootloader.
if you can explain to us a bit more from the beginning that would be more helpful.
Click to expand...
Click to collapse
Tried doing it before, can't unlock before going into developer options and ticking OEM unlocking and USB debugging.
Phone got bricked from failed software update, it just rebooted and got into fastboot... But as i said before its imported, no warranty.
Skayzee said:
Tried doing it before, can't unlock before going into developer options and ticking OEM unlocking and USB debugging.
Phone got bricked from failed software update, it just rebooted and got into fastboot... But as i said before its imported, no warranty.
Click to expand...
Click to collapse
Contact me private, I might be able to help
hassanaliyeh said:
Can you explain what exactly you've done?
from what you said I understand that you've flashed a different rom and locked boot loader. and now it is stuck in bootloop and fastboot. is that correct?
as long as you can go to fastboot. have you tried to unlock bootloader again your official unlock tool? happened with me and it worked, once unlocked bootloop stopped and device ran into system straight away. as simple as that. and yes, with non official rom installed and locked bootloader.
if you can explain to us a bit more from the beginning that would be more helpful.
Click to expand...
Click to collapse
The same thing happened to me, someone could help me please?
I had fastboot loop issue and edl bricked issue in mi 11 ultra twice times.. both of the times i managed to fix it by help of person in telegram remotely.. he is named @XiaomiAuthorizedflashing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kavishka678 said:
I had fastboot loop issue and edl bricked issue in mi 11 ultra twice times.. both of the times i managed to fix it by help of person in telegram remotely.. he is named @XiaomiAuthorizedflashing.View attachment 5888865
Click to expand...
Click to collapse
For free ?
infamas said:
For free ?
Click to expand...
Click to collapse
at the time i asked for help he helped me free...it was about 3-4 months ago . I don't know now if he does for free or not.. sorry
Kavishka678 said:
I had fastboot loop issue and edl bricked issue in mi 11 ultra twice times.. both of the times i managed to fix it by help of person in telegram remotely.. he is named @XiaomiAuthorizedflashing.View attachment 5888865
Click to expand...
Click to collapse
thank you so much for posting this sir. i asked help from the same guy for help after seeing your post and he unbricked my mi 11 pro(mars) really quick using teamviwer login to my pc. thank you again