Related
Hi all,
I going to tell you the complete story and any ideas orsuggestions will be appreciated.
I bought my mi5 in July. It came with a fake ROM but Ichanged it to OFFICAL GLOBAL STABLE .
Since then, I used the device perfectly fine, and follow theMIUI forum regularly.
Then in November I applied for betatesting Team and theyaccepted me. As my bootloader was still locked, I tried option one from abovetutorial, so I directly downloaded in my phone the GLOBAL DEV ROM and Ichoosing the package I started using Nougat for about a month, more or less.
Then, the tragedy happened. I was in a bar, having my phonein my trousers back pocket, and I set down that way. One minute, no more. Thephone´s battery was around 70%. When I realized I quickly took it but it wasnot able to turn on… Nothing pressing power volume + or any combination… I came home and let it charging all night (wallcharger) and nothing the morning after.
I tried to connect it to my PC but nothing happened in the screen,but pressing Power Volume+ the Windowsdevice Manager recognized it as “Android phone”, so after reading some threads about bootloader issues I decidesto flash it. I requested permission and then flashed it with the latest CHINADEV version. The flashing was completed, but the phone still not turningon. NEXT STEP: Local Technical Service.
They had my phone during a week. They tried to change thescreen, nothing, the battery nothing, and I don’t know which other tests theyperformed but they called me back to tell they were not able of doing nothing.
Having the phone back at home, now I was not able to get thePC seeing it as Android phone again. Nothin. Desperate me, I continued to read in internet and found in XDA a video where basically, you open the phone (remove back, and some screws),short two pins, and the PC is able to see it through the Qualcomm USB driversin EDL mode. Then flashing IS POSSIBLE. That is true. I am able to flashing,and I have tried CHINAs, GLOBAL, older ROMs about a dozen. Always the flash processsucceed, but the phone still not turning on.
After flashing I let the phone the whole night plugged inthe PC usb. Nothing
Now is plugged again to the wall charger, but nothing.
There are many threads with different solutions, so guys,please, anyone with a good idea to try??
Many Many thanks in advanced
https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Read this and
Use only the versions mentioned
this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .
I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!
xmmn said:
this device is just a chinese junk i regret bought it , just after 2 days i bought it got hard bricked .
anyway flash 7.2.4 and if phone didnt boot use 3 button ( up + down + power ) for 1 minute or more and it must boot , it did work for me .
Click to expand...
Click to collapse
Which 7.2.4 please??
[email protected] said:
Which 7.2.4 please??
Click to expand...
Click to collapse
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google
xmmn said:
hope it work for u . i read some people + me got device booted with this .
gemini_global_images_V7.2.4.0.MAAMIDC_20160129.0000.14_6.0_global
you can download from xiaomininja just search in google
Click to expand...
Click to collapse
not worked
Nbkdnssr said:
I just got brick yesterday and followed those instructions. It really worked. I was finally able to flash china dev 6.11.10. Latest dev said just "missed hello packet".
MiFlash version 2016.04 and china dev 6.11.10 was right combination for me. I connected Mi5 to PC while pressing vol- and power buttons, then I released them. I opened miflash, selected rom and chose "flash all". Flashing was completed. I tried to power on my phone pressing power button but nothing. But when I pressed vol- and power, I was able to get to fastboot mode. Rest is history. I flashed TWRP, booted to it and flashed LineageOS again.
Hope it works for you too!
Click to expand...
Click to collapse
im not able to find the rom... could you help me?
[email protected] said:
im not able to find the rom... could you help me?
Click to expand...
Click to collapse
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/
Nbkdnssr said:
Sorry, it was global dev 6.11.10 that I used, not china dev.
I downloaded it via this link: http://xiaomininja.com/2016/11/11/m...1-10-is-out-download-it-here-for-your-device/
Click to expand...
Click to collapse
Thanka for your hel but finally not worked...
Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.
JJeamy said:
Did you already tried to pressing and hold vol up + power button then at the same time repeatedly pressing vol down button until mi logo appear..?, id not yet..just try this method repeatedly.
Click to expand...
Click to collapse
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?
[email protected] said:
I am trying that but screen is istill black.. maybe is a hardware issue? it is weird having flash working fine, isn´t it?
Click to expand...
Click to collapse
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..
JJeamy said:
Yup..it's weird thing...i suspect there's a hardware issue too..
But anyway..did you already tried to flashing fastboot rom with QFIL (qualcomm tool) too..?, if not yet..just try it..you can follow tutorial from this youtube here , just bypassing the step for installing any driver if your phone already detected as qualcomm port in your pc.
I try this method to get back my friend Mi4c from dead with condition like this too..just edl or qualcomm port while connect in device manager, then after flashing with this tool..i've try to power on with vol up + power and repeatedly vol down method above..then mi logo appear.
Hope your phone get back turn on soon..
Click to expand...
Click to collapse
Can you help me to find a correct ROM to try?
[email protected] said:
Can you help me to find a correct ROM to try?
Click to expand...
Click to collapse
You can try this official global stable fastboot rom that's still based android 6.0 here
If above direct link doesn't work..just visit this link , then choose "Xiaomi Mi5 Global Stable or China Stable Version Fastboot File Download..
If getting error while flashing..just put extracted folder of fastboot rom in the root of your system..ie C:\[folder_fasboot_rom]
Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!
[email protected] said:
Hi all,
After a million tests, now the phone is able to go to fastboot mode easly just pressing power&volume- (even having a black screen...) Any idea to see if this is still worth to fight?
Regards!
Click to expand...
Click to collapse
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?
[email protected] said:
not worked
Click to expand...
Click to collapse
Did you test it?
Keyvannn said:
Solved with this way
Originally Posted by adwinp
1: if you're detecting it as qcom 9008, there's a good chance it's in EDL mode, which is good news
2: download MiFlash from here: https://www.androidfilehost.com/?fid=24521665358595574
3: download the latest dev rom from here: http://update.miui.com/updates/v1/fu...ni&b=X&r=cn&n=
4: Extract the files to C:\
5: Open MiFlash & point the folder to the root ROM folder, example: C:\gemini_foo_bar, NOT C:\gemini_foo_bar\images
6: connect your phone & select flash all (1st option from the left, bottom of MiFlash tool)
This might take a few tries (example - you might receive "missed hello packets)
Once you're done, you can stay with the China Dev, unlock the bootloader & flash a xiaomi.eu rom, or CM.
Good luck.
Click to expand...
Click to collapse
------
I do this way several time but with updated miflash and fastboot rom and nothing happen.
But with this mi flash and global stable 7.2.4 and only selected #all flash#
My phone flashed
Im very happy
Thanks alot
Sorry for my bad english
Click to expand...
Click to collapse
Keyvannn said:
Did you test it?
Click to expand...
Click to collapse
I tried this and not worked for me...
JJeamy said:
Just try typing command "fastboot oem device-info" to see the status of your bootloader...is it still at unlocked or already relocked..?
If still at unlocked state..you can flashing fastboot rom with miflash tool.
Anyway what about QFIL method above that i said before..?, any change happen after flashing with this tool..?
Click to expand...
Click to collapse
I havent tried yet QFIL, but I will and let you know... Thanks so much!
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
I have exactly the same issue. With identical error codes. Still trying to work out a solution.
on the Huawei website, the had a bootloader.img installer for older models but none for the p10/ p10 plus
Any advice would be appreciated
Let phone completely discharge even it power off automatically. Then put the phone on the charging it will boot up to system then go to settings >advanced settings>back up&reset> reset all settings
when it boot i cant see anything except black . i can only turn off or volume.
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Blackball said:
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Click to expand...
Click to collapse
it doenst work , i tried all combination. it always go to error when i tried. is it possible that some flash box could fix?
I never heard that someone killed his fastboot. Press longer the vol -
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
rosarioglen18 said:
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
Click to expand...
Click to collapse
sadly , i havent found any solution yet. sorry . i also wish to fix it
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
DallasCZ said:
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
Click to expand...
Click to collapse
thank you ,unfortunately it not possible to go to fastboot mode, when the phone on error state. pc also not detect. i apreciate the help.
1-the second link i posted is about to flash service stock firmware trough force update (vol+,vol-,power). have you tried?
2-what the phone does when you try to start the fastboot mode (connect with pc, turn phone off, turn phone on with vol- and power)?
3-what is your model number L09CxxxBxxx?
I have sam problem last 3 days and i cannot solwed
solution
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
p10 no recovery
franmasco said:
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
Click to expand...
Click to collapse
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
---------- Post added at 10:21 AM ---------- Previous post was at 10:09 AM ----------
fresigi said:
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
Click to expand...
Click to collapse
ps,,the model and VTR-L09 EUROPE, IF USE DLOAD, IS 5% BLOCK
p10 no recovery
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.[/QUOTE]
fresigi said:
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
[/QUOTE]
Hi, I was having the same problem. Mate 8 EMUI 8.
After looking everywhere and trying all the options available, I wasnt able to resolve.
Finally, I tried FunkyHuawei and got my system back through eRecovery.
Gave them the readings like version no. , build no...etc through fastboot. The required info is on their site. They then reverted with a link of the firmware which I flashed through their FuHunbrick tool. It force updates the entire full last version.
After flashing and booting, the system didnt boot but was able to go to eRecovery and restored my previous version.
If you or anyone else stuck at this error, they can try at their own risk as they dont guarantee anything.
Edit: you should and will be able to boot into fastboot once the battery is totally down and phone shuts off completely. Just press volume down button and insert usb. Try again and again if it doesnt work first time.
Thanks.
Help
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
elchino!!! said:
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
Click to expand...
Click to collapse
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
apat26 said:
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
Click to expand...
Click to collapse
Hi. I did the battery part and the part of the pressing the vol - is and connecting to pc. It started but didn't got into fastboot or bootloader, just turned on normally and then I ran the adb command "adb reboot recovery" and I had to do the battery part again. I am afraid to run "adb reboot bootloader" because the risks of the draining out the battery. I mean my phone does not enter into recovery.
Hi, there.
I need help, please .
I cannot enter fastboot mode in realme x2 pro CN ver.
Does anyone have the same thing ?
I tried the following 2 .
Press and hold volume up + power button*
adb reboot fastbootloader
Fastboot screen will be displayed for a moment, but normal reboot will be done immediately.
nabetch17 said:
Hi, there.
I need help, please .
I cannot enter fastboot mode in realme x2 pro CN ver.
Does anyone have the same thing ?
I tried the following 2 .
Press and hold volume up + power button*
adb reboot fastbootloader
Fastboot screen will be displayed for a moment, but normal reboot will be done immediately.
Click to expand...
Click to collapse
Lol you need the bootloader unlocked i thing, and for enter press and hold vol- and power
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Lol you need the bootloader unlocked i thing, and for enter press and hold vol- and power
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
That's honestly one of the most useless answers I've read here.
To even be able to unlock the bootloader, you HAVE TO enter the fastboot mode and he cannot. So what you'r saying doesn't make any sense. Like at all.
I do have the same btw and I'm running out of ideas, so if anyone actually has something helpful to say I'd be very thankful.
Neither the button combo nor the adb reboot bootloader does work. I can see the fastboot screen for like half a second and then it reboots normally without even touching the device.
Edit: I just found a way to enter fastboot on my realme X2 Pro.
You have to click on "Start in depth test" on the official Realme App, which can be found here: https://c.realme.com/in/post-detail...64863306907648&subForumId=1197159778845982720
I totally forgot the last setp before actually unlocking the bootloader..
Root after relocking bootloader
Hi, after having relocking bootloader the root is it keep and is it possible to continue to use rooted applications ? Thank's !
Idou77 said:
Hi, after having relocking bootloader the root is it keep and is it possible to continue to use rooted applications ? Thank's !
Click to expand...
Click to collapse
No, and before relocking bootloader, if your not "completely stock", you can brick your device.
lutherkingmartin said:
No, and before relocking bootloader, if your not "completely stock", you can brick your device.
Click to expand...
Click to collapse
Thank you for your answer. Is it true that unlocking the bootloader causes problems with the camera and the fingerprint sensor ?
In my case, only problem with FP, camera was ok.
lutherkingmartin said:
In my case, only problem with FP, camera was ok.
Click to expand...
Click to collapse
Ok thank you again for all those informations ?
..
i stuck in recovery mode bootloop but my device cannot go to recovery ,, after 3 seconds it continue to off and on again ,, cannot go to fastboot mode too..
i using vol - + and power button ,,, the device detected as MTKXXXX ,,, my device is realme 3 ,,
after detected cannot send command with: adb
or fastboot ,, are you have any solution?
I can't enter fastboot in realme x2
Hiii there
I can't enter fastboot in realme x2 it just shows for 2 to 3 sec them reboot normal
What to do
I need help
Help me out
Thanks
Same problem here, i see the bootloader screen for a split second before it boots into RUI all by itself. It's so annoying.
nabetch17 said:
Hi, there.
I need help, please .
I cannot enter fastboot mode in realme x2 pro CN ver.
Does anyone have the same thing ?
I tried the following 2 .
Press and hold volume up + power button*
adb reboot fastbootloader
Fastboot screen will be displayed for a moment, but normal reboot will be done immediately.
Click to expand...
Click to collapse
Same problem here, only on Global version.
RMX1931EX_11_C.36
Security update 5 March 2021
peter0010 said:
That's honestly one of the most useless answers I've read here.
To even be able to unlock the bootloader, you HAVE TO enter the fastboot mode and he cannot. So what you'r saying doesn't make any sense. Like at all.
I do have the same btw and I'm running out of ideas, so if anyone actually has something helpful to say I'd be very thankful.
Neither the button combo nor the adb reboot bootloader does work. I can see the fastboot screen for like half a second and then it reboots normally without even touching the device.
Edit: I just found a way to enter fastboot on my realme X2 Pro.
You have to click on "Start in depth test" on the official Realme App, which can be found here: https://c.realme.com/in/post-detail...64863306907648&subForumId=1197159778845982720
I totally forgot the last setp before actually unlocking the bootloader..
Click to expand...
Click to collapse
I did install the testing app and i'm still having that issue where i only see the fastboot for a split second before the device reboots itself. What am i doing wrong? I also enabled developer mode - OEM unlock - USB debug.
I've flashed my device before and i've even been able to unbrick my own device after "destroying" boot image, but this is something new and it's coming from Realme and i don't appreciate it!
I'm actually looking to replace my device with something more flash friendly, what would you recommend as a good budget device to De-Googlefy?
Hey guys..I am facing the same issue. I cannot get into Fastboot mode using the key combination or adb method. With the ADB method and the unlock tool the phone reboots with fastboot written with some chinese characters for a split second and then boots up as normal.
Has anyone found any solutions?
I am on the 5th March 2021 security update.
I also suffer from the same problem, When I want to go to Fastboot, a logo comes for 2/3 seconds and then the system is rebooted.
I am also facing the same issue. Any Help?
Same here.
Milan-XDA said:
Same problem here, i see the bootloader screen for a split second before it boots into RUI all by itself. It's so annoying.
Click to expand...
Click to collapse
Same on my device, looking for a solution if there is.
Is there room for me?
Hi,
I'm stuck with my phone: it still loopbooting every 5seconds, black screen, only retrolight.
Bootloader is unlocked. I wanted to install twrp, but fastboot says partition recovery not existing.
After reboot, i'm stuck with this mod.
Try to press volume - to go again in fastboot : phone is detected by computer, then disconnected because it's rebooting.
Do you have a solution to try for me?
Or what are EDL point? I've tried to make an ELD cable but did not work either.
How long is your bootloader keeps active? If it's about 5 - 10 seconds, you can try paste the command to flash stock recovery. I attached it if it's possible to do so (from the latest global). And by the way - THERE IS STILL NO ANY CUSTOM RECOVERY for our device, sadly. Actually there is some, but only mouse works.
The commands to paste:
fastboot flash boot twrp.img
KastenTop said:
twrp.img
Click to expand...
Click to collapse
Boot.img in this case, doesn't make much difference
Sorry but my bootloader don't stay active long enough. I just ear usb detection from PC , then one seconde later, usb disconnection sound.
Phone is still loop booting.
Can you try then pasting "fastboot oem edl" (emergency download mode). The screen should turn black
After that flash with Xiaomi Flash tool
I'm unable to enter in FastBoot mode.
Phone booting black, and every 5 seconds , reboot.
If i push "volume down " button, i hear it vibrate, but nothing. Reboot and not detected by fastboot.exe
I think i have, with all manipulation , relocked the bootloader.
My only way, will to find a way to boot in EDL mode.
Test points, which are unknown so far. You have to disassemble the phone, tho. And you can try to find these points yourself, at your own risk obviously. If you will succeed, pls tell me. We need to know the test points.
I was exactly in same trouble, use This guide that solve the issue.
How to use MTK Bypass to backup or flash secure boot MTK
This is a step by step guide showing how to flash or backup a Mediatek (MTK) secure boot device without using a custom download agent (DA). This tool disables the SLA / DAA bootrom protection A little
forum.hovatek.com
Press mobile three buttons and connect cable to pc to enter brom mode. Because mtk models don't have test point. So don't need to open mobile.
proxynet said:
I'm unable to enter in FastBoot mode.
Phone booting black, and every 5 seconds , reboot.
If i push "volume down " button, i hear it vibrate, but nothing. Reboot and not detected by fastboot.exe
I think i have, with all manipulation , relocked the bootloader.
My only way, will to find a way to boot in EDL mode.
Click to expand...
Click to collapse
EDL mode in Xiaomi mediatek are called BROM mode. Don't need to disarm the mobile.
Thanks !
I tried, it works like a charm !
You're the best man
Zaiserr2 said:
EDL mode in Xiaomi mediatek are called BROM mode. Don't need to disarm the mobile.
Click to expand...
Click to collapse
nice tip!!!! this is a very helpfull guide for solve hard brick on mtk devices. i have decided never modding this phone, excep root when i need a full backup with migrate. because is much mure complicated than snapdragons. but your post is very very helpfull for who want to try anyway
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Andris85 said:
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Click to expand...
Click to collapse
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
gurtnyi said:
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Click to expand...
Click to collapse
Just the boot.ini. but I think this would make fastboot mode work. But it's not working
tutibreaker said:
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
Click to expand...
Click to collapse
What should I use to reflash? Mi flash? This is the NS
Yes... I probably mixed up the boot file in the downloads folder and not the correct received flash
Click to expand...
Click to collapse
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
gurtnyi said:
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
Click to expand...
Click to collapse
yepp, enable oem unlock. But fastbootmode is required for all operations. But fastboot mode doesn't work.
What do you mean it doesn't work?
Can't enter into fastboot mode?
gurtnyi said:
What do you mean it doesn't work?
Can't enter into fastboot mode?
Click to expand...
Click to collapse
Can't enter fastboot mode. The device only shows "Redmi" lettering. If fatboot worked, I could have done it already. power+volume down, the device just restarts and shows "redmi".
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
gurtnyi said:
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
Click to expand...
Click to collapse
it just restarts, as long as I press and hold volume down+power, if I don't press it, it just shows the redmi text
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
gurtnyi said:
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
Click to expand...
Click to collapse
TXH
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Pegelaar_NL said:
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Click to expand...
Click to collapse
Yep, this guy here 's got the point. If you can't flash with sp flash tool because auth fail, there's a method to bypass it.
You can find the tutorial here: https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
I also got some help from this guy's post, many thanks to him too.
https://forum.xda-developers.com/t/...ad_da_fail-0x7d4-2004-for-mtk-phones.3692259/
Let us know how it's going with it! ;D
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buytoday there is a lot of devices for gaming like rog phone and red magic
Click to expand...
Click to collapse
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Click to expand...
Click to collapse
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
tutibreaker said:
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Click to expand...
Click to collapse
If you can root it easily, then the expensive one is good for me! Normal root was not available for typical gamer phones for years. If I buy something for which root may not be available, then I'm wasting my money...
gurtnyi said:
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
Click to expand...
Click to collapse
I will look today