hi ,can anybody give me the gprs settings so i can use msn messenger and browse the internet,ive been told there might be a patch out there that you put in the phone and it ajusts it itself,can anyone help plx thx
There's a useful list of UK operators GPRS settings at http://www.filesaveas.com/gprs.html
or try these
How do I manually check/setup the GPRS Web settings?
Start > Settings > Connections > Connections >
Under My ISP tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: mobile.o2.co.uk
Tap Next
Username2web
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Use Specific Server Addresses should be selected
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap OK
Tap Finish
How do I manually check/setup the GPRS WAP settings?
Start > Settings > Connections > Connections >
Under My Work Network tap Manage Existing Connections and then Tap Edit
(if this isn't present then tap 'Add a new modem connection')
The Select a Modem drop-down box should be set to Cellular Line (GPRS)
Tap Next
Access Point Name: wap.o2.co.uk (for Prepay enter payandgo.o2.co.uk)
Tap Next
Username2wap (for Prepay enter payandgo)
Password: password
Domain: leave blank
Tap Advanced
On the TCP/IP tab, only Use Server-assigned IP Address should be selected
Tap the Servers tab
Only Use Server-assigned Address should be selected
Tap OK
Tap Finish
Tap Proxy Settings
Tap Advanced
In the WAP field enter 193.113.200.195
In the field to the right of this enter 9201
Tap OK and exit
How do I manually check/setup the MMS settings?
Start > Messaging > Tools > MMS Settings
Connect Via: My Work Network (this links to the GPRS WAP settings)
Tick Retrieve Messages Immediately
Tick OK to download when roaming
Tick Save sent messages
Attempts before give up: 3
Photo Resolution: Original
Tap the Servers tab
Tap O2UK
Server Name: O2UK
Gateway: 193.113.200.195
Port Number: 9201
Server Address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitations: 100K
Tap OK twice to exit
How do I manually check/setup the POP3 settings?
Start > Messaging > Accounts > Accounts >
Tap the name of your email account (or tap New to setup a new account)
Email address: enter your full email address
Tap Next
Your Name: your full name (or can be anything)
User Name: your email account username (the format will differ across ISP's)
Password: your email account password
Tick Save Password
Tap Next
In the Name field you can enter a name for the account (only possible if setting up new account)
Tap Next
Incoming Mail: your ISP incoming mail server
Outgoing Mail: smtp.o2.co.uk
Leave the Domain field blank
Tap Finish
I need some advice on how to get my web and MMS working on my diamond. I originally bought a new Sprint Diamond. I took it to Metro PCS and had it flashed to their network. Now my voice and text work. So I'm trying to get my web and MMS working. I changed my ROM to Juicy 4.3 and tried following a tutorial found here:
Code:
http://forum.xda-developers.com/showthread.php?t=448955
I tried everything exactly like it said there, and it is not working. Here is my exact settings and changes that I made:
1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.
I checked my windows folder, but I'm using Juicy 4.3 and I think that this file is not included in the ROM. In any case, it is not there.
2: Rename the following files and folders:
Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD
Once again, these files are not in my windows folder. I'm not sure what effect these files have on my connection, but I was unable to edit them.
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.
I did this with no problem. My unlock code was just 000000.
4: Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = [email protected]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = [email protected]
PPP PASSWORD = metropcs
My number is 972-781-8284, so I used the following:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = 9[email protected]
Home Address = 0.0.0.0 (set to 0.0.0.0)
Primary HA Address = 0.0.0.0 (set to 0.0.0.0)
Secondary HA Address = 0.0.0.0 (set to 0.0.0.0)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = [email protected]
PPP PASSWORD = set to metropcs
5: Goto Connections and delete any existing connections and setup a new one using the following settings:
Number to dial = #777
Username: [email protected]
Password: metropcs
Domain: (Leave Blank)
Select Proxy Settings and enter the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
I changed my settings to this:
Number to dial = #777
Username: [email protected]
Password: metropcs
Domain: (Left Blank)
I set my proxies to the following values:
wap.metropcs.net port:3128 (http)
wap.metropcs.net port:3128 (wap)
wap.metropcs.net port:443 (secure wap)
wap.metropcs.net port:3128 (socks)
So I click on the new connection and select the "Connect" option. It tries to connect and then it says that my username and password is wrong for #777. I try to go on the web and it won't connect. Also, when I go back and look at the connection, it deletes what I entered for the http option in the proxy settings. The other 3 settings are still there (wap, secure wap, and socks).
I'm not sure what else to try. I used the *228 option and updated my PRL firmware. It still doesn't let me connect. Please help!!!
Ok, I've got an update. I was able to connect to the web last night by changing the password in the tutorial to "mymetropcs". I changed it in the connection settings and also in the PP Security Settings.
Here is my current problem... My connection won't stay connected. It will sometimes connect for a little while, and then spontaneously disconnect. Most of the time, it won't connect at all. It gives me an error and says that my username or password is invalid. Also, It will sometimes delete my HTML Proxy settings that I entered in Connections. Does anyone know what is causing this and how I can fix it?
Confirmed
Followed all the steps and works perfectly ...
The only difference I had was my password and I used the last 4 numbers of my cell.
Thanks for the info.
skyfire not working?
Hey Guys,
I got internet working on PIE and google maps, etc, but for some reason Skyfire shows "network unavailable". I've tried swiching work network to the metropcs connection for programs that authenticate using a private network, but not go. Any ideas? Thanks.
htc guardian
Quick question, In my startup folder I do see a HTC CM Guadian but I do not know if its a .lnk or .exe? And if so I need to delete if its a lnk right? Under Windows folder i also have the same thing and do not know if its the .lnk or .exe? And I do not have the Iota files. Please help thank you!!
1: Check your Windows\startup folder for "HTC_CM_Guardian.lnk", which is a shortcut to Windows\HTC_CM_Guardian.exe. If the shortcut exists delete it. If not then you probably have a newer Sprint ROM which doesn't have the shortcut to launch that application. It is still launching it in some other way however and I have not been able to figure it out from searching forums and the web. The general consensus is to replace the file with a dummy file that I've attached (extract from the zip). Download the attached file and replace "Windows\HTC_CM_Guardian.exe" with the dummy file which will prevent it from running.
2: Rename the following files and folders:
Windows\iota.exe ---> windows\iotaOLD.exe
Windows\iotaconf.txt ---> windows\iotaconfgOLD.txt
Program Files\IOTA ---> Program Files\IOTAOLD
Hey i looking for a program that do the follow things
-connection open (wireless lan,bluetooth,ir,gprs,...) on timed base
example preferd bluetooth no con for 30sec
try lan no lan
try gprs ........
all automatic
-run the things you want from a profile example quickgps
-connection close
or
- connection open on timed base
- come in range from comp
- active sync will automatic sync i hope else at it to the profile
- close connection
list is endless ...
but the basic thing is the same
t'hanks
From PhamQuang:
"WAY THROUGH MODIFICATION REG. GPRS TO INVOLUNTARY
enable you to follow the path below:
HKEY_LOCAL_MACHINE \ Comm \ ConnMgr \ Providers \ (7C4B7A3
8-5FF7-4bc1-80F6-5DA7870BB1AA) \ Connections \
will see Key GPRS, MMS, WAP, .. . (For example I'll use the Beeline branch "Beeline GPRS "...) In the Key on Key change in each value of" Enabled "to 0 (normal value 1) and Left SR machine is finished."
Hi guys, I want to connect to a server via OpenVPN from a .py script from Kodi.
This is a working task in Tasker:
Code:
Send Intent
Action:android.intent.action.MAIN
Cat:None
Extra:de.blinkt.openvpn.shortcutProfileName: PROFILENAME
Package:de.blinkt.openvpn
Target:Activity
and this is my .py script but it's only taking me to tasker which is really not what I want. I don't want tasker to open at all just do the task silently.
Code:
import xbmc xbmc.executebuiltin('StartAndroidActivity(de.blinkt.openvpn,android.intent.action.MAIN,de.blinkt.openvpn.shortcutProfileName: PROFILENAME)')]
Hope someone can help me.