Hi, is there anyone here who succesful flashed mokee rom?
I cant get it to boot and forums of mokee are chinese
help would be great
Just do format data by "yes"(internal memory will be erased) at the end.
Related
Hi,
I have an infinite boot loop when i try to get CM11 on my Z1.
You have to know that :
- I unlock my bootloader with adb and it's work : my bootloader is unlock
- I try ALL nightly honami rom on cyanogen website
- When i turn on CWM I clean reset all cache (wipe, dalvik and wipe data)
- I install the gaps too for 4.4
So after that i try an unofficial CM 10.2 stable version with gaps for 4.3
And get infinite boot again and again... !
I don't see where is the problem ? I wait 20 minutes for each times and roms are put the SD card.
I use adb for unlock my bootloader and i boot the good boot.img for each rom in the shell before the install.
Help please ! Why it's not work ?
Thanks
:up:
Did you ask this to the OP of the Rom which you installed, maybe he know the solution.
I had this issue once on my galaxy s2.
By that time, I used a custom kernel that wasnt optimized for CM. Could it be that you are using a custom, non-CM-supporting kernel?
Also try a factory reset before you install CM
I get this with just about every rom apart from CM11. I'm currently struggling with romaur
Hope you manage to get it sorted
The questions remains . What kernel are you using? Did you do a factory reset before flashing?
You must wipe data,system and caches BEFORE installing a custom ROM
Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks
Shehry_97 said:
Hey everyone, :laugh:
I found an Official update for my device from CyanogenMod Download Site.
I search any forum if available here about this ROM, unfortunately i cannot be able to find any form related to this ROM. Then i download 5.1 Gapps and download the ROM CyanogenMod 12.1. i wipe dalvik , userdata , cache and system. then flash both of the zip files ive downloaded. As i was using 12.0 Cyanogen i dont think i need to flash Cyanogen snapshot as it require for 12.0 to solve the BootLop. After flashing my phone is stuck on the booting animation since 20-25mins then i force reboot my phone into Recovery then i flash the SNAPSHOT and then reboot for once it works fine for me, then i just flash 12.1 and L gapps on the phone and then reboot, unforunately im facing the same problem from last hour. I dont know how to make 12.2 Cyan to work on my phone wihtout bootlop.
If anyone knows how to remove the bootlop then please let me know, thanks
Click to expand...
Click to collapse
Hmmm...I was on CM12 and wiped everything (cache, dalvik cache, system, data) so I clean flashed CM12.1 and GApps 5.1, after 2-3 mins it booted ok. So I guess flashing CM11 first is not needed. Just try again idk...:/
I unlocked my device (moto g2 dual sim xt1068) , rooted , installed TeamWin Recovery , made a backup of stock and wiped everything (cache, dalvik, system, data, internal storage)
Then flashed
[TITAN][5.1.1] Cyanogenmod 12.1 [UNIFIED]
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-12-t2993932
& Gapps
It booted but all I got was " Unfortunately, System UI has stopped "
I went back to stock and tried again and again with Gapps , without Gapps , with everything wiped and without wiping any thing
What should I do to use this ROM ?
Notice :-
I tried that with Nightly builds 20150513 and 20150514
have you try the rom without gapps?
if works you have a gapp problem.
try others rom and or gapp combinations.
i use this and is flawless.
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
http://forum.xda-developers.com/moto-g-2014/development/rom-blisspop-v3-0-t3079125
:good:
EAEN said:
I unlocked my device (moto g2 dual sim xt1068) , rooted , installed TeamWin Recovery , made a backup of stock and wiped everything (cache, dalvik, system, data, internal storage)
Then flashed
[TITAN][5.1.1] Cyanogenmod 12.1 [UNIFIED]
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-12-t2993932
& Gapps
It booted but all I got was " Unfortunately, System UI has stopped "
I went back to stock and tried again and again with Gapps , without Gapps , with everything wiped and without wiping any thing
What should I do to use this ROM ?
Click to expand...
Click to collapse
Your problem is most probably because of gapps . Use different gapps I have never got such problem. I use minimal gapps .! best of luck!:good:
I tried installing without Gapps..... And tired installing with Gapps
Both gives systemUI FC
.
.
I TRIED DIFFERENT Rom (TeamUB) AND it works perfectly
Maybe this problem with cm12.1 is because I use dual sim version of moto G2 or it supports dual sim?
EAEN said:
I unlocked my device (moto g2 dual sim xt1068) , rooted , installed TeamWin Recovery , made a backup of stock and wiped everything (cache, dalvik, system, data, internal storage)
Then flashed
[TITAN][5.1.1] Cyanogenmod 12.1 [UNIFIED]
http://forum.xda-developers.com/moto-g-2014/orig-development/rom-cyanogenmod-12-t2993932
& Gapps
It booted but all I got was " Unfortunately, System UI has stopped "
I went back to stock and tried again and again with Gapps , without Gapps , with everything wiped and without wiping any thing
What should I do to use this ROM ?
Click to expand...
Click to collapse
I had this problem too. Flash a different CM build. There was a bad build that made this problem. I believe it was the May 16th one. (I may be wrong)
EAEN said:
I tried installing without Gapps..... And tired installing with Gapps
Both gives systemUI FC
.
.
I TRIED DIFFERENT Rom (TeamUB) AND it works perfectly
Maybe this problem with cm12.1 is because I use dual sim version of moto G2 or it supports dual sim?
Click to expand...
Click to collapse
It works perfectly with the XT 1068, you must download the latest cm build, because are better than the previous ones.
the problem was solved after flashing the latest build
Thanks everyone
Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much
Hassan Qandil said:
Hello
today before I install CM 12.1 on my XT1072 I clicked on wipe in TWRP then advanced wipe then I selected
* Dalvik cache
* Data
* Cashe
* System
I tried to install CM 12.1 after that but it gave me Error
now I don't have any os installed on my phone
So please if any one know a full rom link or any way to install the os again please help me with it
thank you very much
Click to expand...
Click to collapse
Download from Cyanogenmod site the last nightly of CM for THEA (http://download.cyanogenmod.org/?device=thea)
Put it in the micro SD card of your phone (using another phone or the card reader of your PC if it has one)
In TWRP install the ROM from the external SD (and Gapps if you want to use them)
In this situation I think that the above method is the only one, but wait for other answers, it could be that someone can show you better ways.
when I tried to install CM 12.1 the same way you said .. the phone gave me a failure message
Hassan Qandil said:
when I tried to install CM 12.1 the same way you said .. the phone gave me a failure message
Click to expand...
Click to collapse
Can you report that message?
The first time you install a ROM after a system wipe (as you described), TWRP gives an error message, but, after system reboot (by TWRP function), the phone starts normally and CM starts the standard update procedure
I am not sure what do you mean exactly but the installation of cm 12.1 didn't even start
gave me error message .. I think that cm rom need stock rom to install over it
now I just want to install the official firmware .. but I didn't found any rom img files yet
I thank every one can help me ... it's my only phone :crying:
Hassan Qandil said:
I am not sure what do you mean exactly but the installation of cm 12.1 didn't even start
gave me error message .. I think that cm rom need stock rom to install over it
now I just want to install the official firmware .. but I didn't found any rom img files yet
I thank every one can help me ... it's my only phone :crying:
Click to expand...
Click to collapse
Mmh, it's a strange situation. I wiped system memory about three/four time on my phone (and also on my friend's phone) and the procedure I described to you worked for me every time. But the error message, in my case, was after CM installation and not before, as in your case.
Did you check the MD5Sum (or SHA) of the downloaded file to make sure it was not corrupted? The error you received can be related to a corrupted file...
Lastly take a look at this tool:
http://forum.xda-developers.com/mot...dows-tool-moto-g-2015-xt1072-restore-t3124915
I've never tried it but it seems to be suited to your case.
My phone is bootlooping after i tried installing omnirom on it...
Any ideeas on how to fix ?
Flashing original rom wont fix it.
sh0t_ said:
My phone is bootlooping after i tried installing omnirom on it...
Any ideeas on how to fix ?
Flashing original rom wont fix it.
Click to expand...
Click to collapse
More details needed
Which recovery, which ROM version, rooted?
Which original ROM you've tried and how?
I ve tried the official rom , from the official site.
The bootlooping was fixed by formating internal storage and data to ext2 , rebooting device and then formating to ext4 again.
In the end i managed to flash miui 12.5 (13 didnt work for some reason) and then updated back to original miui 13.