Problem with bluettoth and Amazfit GTR - Samsung Galaxy Note 9 Questions & Answers

I'm with problem with my Samsung Note 9 and my Amazfit GTR. I'm already in October patch but the problem persist. I can't update firmware of smartwatch or change watchface because always fail.
Anyone have the same problem? Can be a physical problem with my device (because usying another device from my mom or my sister work without problem)?
PS.: My device is Snapdragon(SM-N9600), I already made a clean install and a hard reset too.

Amazfit GTS - Note 9(Exynos)
I have the exact issue with Amazfit GTS and two samsung Note 9s (both exynos versions)
The watch seems to be working fine with iphone 6s(BT 4.2) and XS (BT 5.0), so it seems to be an issue specific to samsung.

Same here, i just bought amazfit gtr but updating is impossible using my samsung note 9, it stops half way and the the watch reboots and phone couldnt update and this goes on and on and on.
---------- Post added at 01:25 PM ---------- Previous post was at 12:36 PM ----------
I just played around with it again and found out why it is rebooting again and again. So you should not just rely on the amazfit app to connect you need to go to bluetooth setting on ur phone and scan for the watch and then pair it from there as well. Now i can change the watch face, uodate firmware and etc without it rebooting everytime..... Enjoy

archproject said:
Same here, i just bought amazfit gtr but updating is impossible using my samsung note 9, it stops half way and the the watch reboots and phone couldnt update and this goes on and on and on.
---------- Post added at 01:25 PM ---------- Previous post was at 12:36 PM ----------
I just played around with it again and found out why it is rebooting again and again. So you should not just rely on the amazfit app to connect you need to go to bluetooth setting on ur phone and scan for the watch and then pair it from there as well. Now i can change the watch face, uodate firmware and etc without it rebooting everytime..... Enjoy
Click to expand...
Click to collapse
Confirmed working. But had to enable discoverable in the app. Had no such problem with the S9.

I am facing the same challenge, the Samsung Note 9 doesn't support this watch that well. I cannot sync the watch face, I cannot update the firmware for more than half of the things I cannot utilize my phone. I tried to connect with my Samsung Galaxy S8 and everything works so smoothly. My watch keeps crashing when it is connected with Note 9. They have to fix this major bug.
---------- Post added at 05:18 PM ---------- Previous post was at 05:12 PM ----------
archproject said:
Same here, i just bought amazfit gtr but updating is impossible using my samsung note 9, it stops half way and the the watch reboots and phone couldnt update and this goes on and on and on.
---------- Post added at 01:25 PM ---------- Previous post was at 12:36 PM ----------
I just played around with it again and found out why it is rebooting again and again. So you should not just rely on the amazfit app to connect you need to go to bluetooth setting on ur phone and scan for the watch and then pair it from there as well. Now i can change the watch face, uodate firmware and etc without it rebooting everytime..... Enjoy
Click to expand...
Click to collapse
Thank you for saving a lot of time and frustration with this bug. I had the same exact challenge and now I am able to change the watch face as we speak. Great Job, keep it up and keep helping.

archproject said:
Same here, i just bought amazfit gtr but updating is impossible using my samsung note 9, it stops half way and the the watch reboots and phone couldnt update and this goes on and on and on.
---------- Post added at 01:25 PM ---------- Previous post was at 12:36 PM ----------
I just played around with it again and found out why it is rebooting again and again. So you should not just rely on the amazfit app to connect you need to go to bluetooth setting on ur phone and scan for the watch and then pair it from there as well. Now i can change the watch face, uodate firmware and etc without it rebooting everytime..... Enjoy
Click to expand...
Click to collapse
Today I could finally updated the firmware in my Note 9, it looks like @archproject comment was well explained or Samsung and/or Amazfit fixed the problem.
Firmware v1.3.5.08

archproject said:
Same here, i just bought amazfit gtr but updating is impossible using my samsung note 9, it stops half way and the the watch reboots and phone couldnt update and this goes on and on and on.
---------- Post added at 01:25 PM ---------- Previous post was at 12:36 PM ----------
I just played around with it again and found out why it is rebooting again and again. So you should not just rely on the amazfit app to connect you need to go to bluetooth setting on ur phone and scan for the watch and then pair it from there as well. Now i can change the watch face, uodate firmware and etc without it rebooting everytime..... Enjoy
Click to expand...
Click to collapse
I am still having the problem. If I pair it via the app, I wont see it in the Bluetooth menu to pair it , and the other way around, if I pair it via Bluetooth menu, the app does not see it.. BTW Amazfit support is clueless. They said that I need to return the watch. They did not even ask me what phone I have.. I really wanted to like it,, but not as much as to change my Note 9 to a the phone that works with this watch.

Perfect!!!!
Excelent it works!!! Perfect!!!
Just have to reset the GTS as default and connect to bluetooth and after words connect to the Amazfit app and update sucessfuly and now I can also change the watch faces without error.

Thanks so much, factory reset, then pair Bluetooth, then pair in the app. Working great

THANK YOU
It Works

Related

Need Help In Broken Screen I9000

Greetings,
I have SGS I9000 and it was fine but the Screen broken and there is no data on it and the phone still working i still can hear the ring when someone calling me or SMS me and when i connect it to pc I'm hearing the sound from my pc but i can't make anything cos i'm activating the usb debugging
and activating the developer options i'm on SlimBean 4.2.2 and now i need to backup my data and contacts i need help on this plz .
have you enabled the backup of yours contacts on your gmail?
Hopefully you had set the default account for your contacts/address book to be your Google account. This is not always set as a default (especially on stock ROMs) and you tend to have to do it manually (otherwise it just saves them on the actual phone, so if your phone is lost then so are your contacts). This would mean that your address book is always synced with the http://contacts.google.com linked to the Google account that your phone was registered under. Another thing you have to remember is to have the Sync switched on as otherwise it won't ever sync anything to the cloud.
As for the data on the phone..I'm not sure what you can do without a screen as to even connect USB > PC you generally need to select the USB transfer notification from the notification bar then click the activate USB button (can't remember the exact name) and then your phone should connect to all your phones drives. I think maybe that you can access the internal SD card without doing this and of course, the external one should not be a problem as you can just take it out from your phone and plug it into a PC.
As a last resort, you can probably pick up a replacement screen and digitiser from eBay and repair the phone yourself. YouTube should have many videos telling you how to do this step by step.
LCD
Hi, in AliExpress you find at 35$ the replacement LCD included the frame and delivery costs, but you have to bookmark them in your wish list as they fluctuate on price.
Samsung screen is still very good, but for everything else you find for little more new better phone.
If you know someone near you who has the same phone you may ask if they let you insert your motherboard in their screen just to retrieve your data, so you will not spend money at all.
If you live in a big city you may look for a shattered LCD that still work for very little money in a repair phone shop that usually have when installing new one. With a screen protector you will be able to use it without losing parts of glass neither cutting your finger.
Have a look around before spending money, I will do the same and report you if I find something.
---------- Post added at 06:34 PM ---------- Previous post was at 06:31 PM ----------
To temporary change the motherboard you find all instructions in YouTube.
---------- Post added at 06:42 PM ---------- Previous post was at 06:34 PM ----------
Anyway be patient and buy for any phone you own a full case, I founded for this gt i9000 the nice one that is common in new models that cover the screen and replace the back battery door being very slim.

WiFi gone..

Hey there. Had a strange problem, happened 2 times till now. WiFi was completely gone, went to the settings/wifi and wifi was still on, but the list of AP's/Networks was completely empty. Anyone had that happen ?
greets,
nEUTRon
No one, really ?
I've had the saved Wi-Fi connections be forgotten after a reboot/shutdown. Happened this morning actually.
I have tons of wifi problems, but not this one. My wifi takes a long time to come on after being turned off, often more than a minute, and the wifi setting pages hangs.
---------- Post added at 09:27 PM ---------- Previous post was at 09:24 PM ----------
born_fisherman said:
I've had the saved Wi-Fi connections be forgotten after a reboot/shutdown. Happened this morning actually.
Click to expand...
Click to collapse
This can happen if you have multiple devices. The wifi password file acquires multiple entries and the phone fails to pick one. Longstanding bug Google is ignoring. If you have a rooted device you can read the wifi supplicant file and see the multiple entries to confirm this is what's happening to you.
This is happening to me more and more on my Nexus 6. I'm rooted and stock. Haven't found a solution yet.
My WiFi situation is a disaster with nexus 6 too. No problems at al
l with nexus 5 and nexus 7 (2012)

[Q] how can I enable adb with a dead screen? (T-Mobile Note 4)

There are similar questions to this but for other devices but I need to make sure I can do this on my Samsung Note 4 from T-mobile.
http://forum.xda-developers.com/showthread.php?t=2786395
^^^ On that link it gives me the tools to connect to my Note 4, but I believe that I do not have adb enabled on my device, and/or I don't have 'USB debugging" checked marked.
Another member mentioned that I would need help from a developer to sideload a kernal onto my device, via editing the "default.prop"
At the moment I will be ordering a new phone through my insurance but due to some important matters I need help accessing my phone ASAP.
I keep getting 'Rejected" from [email protected] Version 1.1
I have attached images to show what I am seeing and also show the latest tmo firmware. I am rooted, and I am running TWRP 2.8.1.1 or later I believe.
PLEASE, I need help side loading a kernel or something so I can make this work and get into my phone.
P.S. My phone still works, because with my beats headphones I can still answer calls and play music with the headphone cable controls. my alarm still goes off and notification sounds, so to my knowledge only the screen is dead.
Have you tried android screencast or chromecast?
http://code.google.com/p/androidscreencast/
---------- Post added at 05:22 PM ---------- Previous post was at 05:18 PM ----------
https://support.google.com/chromecast/answer/6059461?hl=en
my screen is busted, it wont turn on at all. The phone turns on but i can control anything with the screen because it wont turn on. I need to side load a kernel with ADB enabled

Stuck on Checking for Update after a hard reset

Hi, this is my first time making a thread and I'm not sure if this fits into the right category, anyways I've had to a factory rest since I forgot my pattern password on my Note 9 (because I'm an idiot) and now after the hard reset I am now stuck on "Checking for Updates" after the rebooting the phone and there is no skip button and I have tried doing another hard reset to still being stuck on the same page. I've let this "Checking for updates" run for about 2 hours to only get a message saying "Taking to long? Try going back and connecting to a different network" and I'm really out of options, any help would be appciated.
Thanks.
Do you have Internet access and sufficient bandwidth where you connected to?
Scythe86 said:
Hi, this is my first time making a thread and I'm not sure if this fits into the right category, anyways I've had to a factory rest since I forgot my pattern password on my Note 9 (because I'm an idiot) and now after the hard reset I am now stuck on "Checking for Updates" after the rebooting the phone and there is no skip button and I have tried doing another hard reset to still being stuck on the same page. I've let this "Checking for updates" run for about 2 hours to only get a message saying "Taking to long? Try going back and connecting to a different network" and I'm really out of options, any help would be appciated.
Thanks.
Click to expand...
Click to collapse
I think you can log on to computer and your Samsung account and use an option within findmyphone to fix this.
Sent from my SM-N960U1 using Tapatalk
reminds me of my LG v20 which had similar problem (910K B50) Stuck on firmware upgrade and waiting for connection. Nothing could be done for the LG, hopefully yours can be fixed. It either a virus or interrupted firmware update don't know what else could've done it
raul6 said:
Do you have Internet access and sufficient bandwidth where you connected to?
Click to expand...
Click to collapse
Well I'm currently overseas over at China with very slow internet also not sure about the Mbps since its to slow to run that and I have to use Vpn since China blocks out YouTube, Google etc. so I'm not sure if that's that cause.
*edit* I've managed to run an internet Speed test with an average Mbps download of 0.30 Mbps and upload of 2 Mbps, not sure if that's any useful but hopefully it is
digitalart said:
reminds me of my LG v20 which had similar problem (910K B50) Stuck on firmware upgrade and waiting for connection. Nothing could be done for the LG, hopefully yours can be fixed. It either a virus or interrupted firmware update don't know what else could've done it
Click to expand...
Click to collapse
This phone is relativity new I've only had it about 3-4 weeks, plus aren't you able to run it in safe mode?
Scythe86 said:
This phone is relativity new I've only had it about 3-4 weeks, plus aren't you able to run it in safe mode?
Click to expand...
Click to collapse
nope nothing could be done. no safe mode, no download mode, nothing. going back to the same screen. I even gave the phone to 2 different places to try to fix it and even they couldn't do it, saying there is no file system no structure or anything. so yeah dead weight
---------- Post added at 06:46 PM ---------- Previous post was at 06:42 PM ----------
but what is weird that this happened to me also during traveling to other country US > Europe
digitalart said:
nope nothing could be done. no safe mode, no download mode, nothing. going back to the same screen. I even gave the phone to 2 different places to try to fix it and even they couldn't do it, saying there is no file system no structure or anything. so yeah dead weight
I don't think Samsung would drop there standards, could a low internet connection also cause this continuous thing to never end?
---------- Post added at 06:46 PM ---------- Previous post was at 06:42 PM ----------
but what is weird that this happened to me also during traveling to other country US > Europe
Click to expand...
Click to collapse
Was yours also the Note 9, if so when you arrived back was the issue resolved?
Scythe86 said:
Was yours also the Note 9, if so when you arrived back was the issue resolved?
Click to expand...
Click to collapse
not Note it was LG v20 . looked like similar issue that's why I posted and also as I said dead weight nobody could do anything.
digitalart said:
not Note it was LG v20 . looked like similar issue that's why I posted and also as I said dead weight nobody could do anything.
Click to expand...
Click to collapse
Sorry thought some else commented that overseas thing. So did this issue also happen to you traveling overseas?
Scythe86 said:
Sorry thought some else commented that overseas thing. So did this issue also happen to you traveling overseas?
Click to expand...
Click to collapse
i dont know if you read my last post but i already said that >>>>
---------- Post added at 06:46 PM ---------- Previous post was at 06:42 PM ------
but what is weird that this happened to me also during traveling to other country US > Europe
so yes exactly happened during travel overseas which is more weird
digitalart said:
i dont know if you read my last post but i already said that >>>>
---------- Post added at 06:46 PM ---------- Previous post was at 06:42 PM ------
but what is weird that this happened to me also during traveling to other country US > Europe
so yes exactly happened during travel overseas which is more weird
Click to expand...
Click to collapse
Yes sorry I just wanted to make sure. Does the warranity cover this at all?
Scythe86 said:
Yes sorry I just wanted to make sure. Does the warranity cover this at all?
Click to expand...
Click to collapse
yeah I think it should so you should be good
I have an identical issue, on my note 8, and i am also in China. wondering if there was any solution found?
I suspect the problem might be because china blocks Google services and the phone is trying to connect to google.
Please if a solution was found, do share.
I assume you've all tried setting up without a sim and wifi disconnected? Works fine for me, it just skips the update checking on initial setup as there's no connection.
Sent from my SM-N960F using Tapatalk
I've had the exact same problem on my galaxy s8 and had excellent wifi connection when I tried to get it going after the reset (but still tried to do it with two other connections). I removed the simcard, disconnected the wifi and it just skipped that step (looking for updates). Now the phone is working good!
(still scared that the virus hatched on once again since I didn't wipe my SDcard and put it in again (stupid). But I'm always a bit paranoid and I'm not sure it works that way)
Fixed the problem anyways. Just remove simcard and disconnect wifi.
Synt4x.93 said:
I assume you've all tried setting up without a sim and wifi disconnected? Works fine for me, it just skips the update checking on initial setup as there's no connection.
Sent from my SM-N960F using Tapatalk
Click to expand...
Click to collapse
Hi i tried that, but it doesn't let me, continue if i don't select wifi.
---------- Post added at 03:20 AM ---------- Previous post was at 03:18 AM ----------
jd14771 said:
Try setting up a wifi router with a VPN that allows you to connect to Google services. Then connect to wifi (ran through vpn) and you should be good.
Click to expand...
Click to collapse
I was thinking the same thing, just need to get a router with VPN, thx for the advice.
hi, my note has done the same thing, I did a factory reset... need to be able to stop the checking for updates somehow?
or find someone with a modem with a VPN instilled on it. any ideas
?
This is how to fix the problem if overseas
number one If you have hard reset your phone, and then realised I need that VPN to go online like myself in China.
turn off the WIFI on your phone, remove your sim card turn off the phone. turn your phone back on and you can set up the phone again, turn on the phones wifi and re-back up your phone from your Samsung account.
the reason why you should use Google and Samsung to back up all your things is for this reason. you don't need a VPN for Samsung.
this should work on all phones.
mine phone is a Samsung note 9 with android 9 operation system, 8gb -512gb
thanks:good:

(please help) - data not working while on hotspot

Hi helpful people of xda,
Long time lurker but having come from a Samsung where everything 'worked' I'm feeling a bit frustrated with my new p20 pro (as nice as the device is).
Issue is simple. When tethering via hotspot, data on my phone does not work so WhatsApp and slack / email aren't pulled through. When I turn hotspot off, everything comes through.
Having searched for others having this issue one suggestion was to delete apn details, however the hotspot apn doesn't show up.
Any ideas? Help much appreciated
With things like this it would be handy to state your region and which firmware/update you have installed.
---------- Post added at 12:50 PM ---------- Previous post was at 12:45 PM ----------
Oke, i just tested my hotspot and everything seems to work fine. I connected my tablet and did a youtube stream while i used the phone to send whatsapp etc and all flawless. im on CLT-L29 with 8.1.0.159 C432
RiTCHiE007 said:
With things like this it would be handy to state your region and which firmware/update you have installed.
---------- Post added at 12:50 PM ---------- Previous post was at 12:45 PM ----------
Oke, i just tested my hotspot and everything seems to work fine. I connected my tablet and did a youtube stream while i used the phone to send whatsapp etc and all flawless. im on CLT-L29 with 8.1.0.159 C432
Click to expand...
Click to collapse
Ah yes of course: am In the UK on a CLT-L09 8.1.0.133 C782

Categories

Resources