Related
Is there any current way to root the Nexus One on FRG83 (2.2.1) to where you don't have to unlock the bootloader?
Basically looking to be able to flash a ROM without voiding my warranty for good by unlocking the bootloader, since that cannot be restored to factory no matter what.
Any help would be appreciated, I have searched all the N1 forums but haven't seemed to find this out.
orangekid said:
Is there any current way to root the Nexus One on FRG83 (2.2.1) to where you don't have to unlock the bootloader?
Basically looking to be able to flash a ROM without voiding my warranty for good by unlocking the bootloader, since that cannot be restored to factory no matter what.
Any help would be appreciated, I have searched all the N1 forums but haven't seemed to find this out.
Click to expand...
Click to collapse
Yep - check out the link in this thread - I used it on my recently aquired 100% stock FRG83 Nexus One.
http://forum.xda-developers.com/showthread.php?t=812620
JWhipple said:
Yep - check out the link in this thread - I used it on my recently aquired 100% stock FRG83 Nexus One.
http://forum.xda-developers.com/showthread.php?t=812620
Click to expand...
Click to collapse
awesome, I'll try it out.
and just to confirm, this DOES NOT unlock the bootloader?
orangekid said:
awesome, I'll try it out.
and just to confirm, this DOES NOT unlock the bootloader?
Click to expand...
Click to collapse
DOES NOT unlock the bootloader
No open lock showing on my boot screen.
Also works on a large number of other phones.
awesome,
I been wanting to flash a Sense ROM on this thing but keep my warranty, this is perfect.
Thanks!
orangekid said:
awesome,
I been wanting to flash a Sense ROM on this thing but keep my warranty, this is perfect.
Thanks!
Click to expand...
Click to collapse
Let me know if it works out for you!
I'm not the author but when I stumbled upon this app (since I was only looking for Nexus specific apps), but when I found it I was pretty damned happy that it worked as quickly and painlessly as it did!
JWhipple said:
Let me know if it works out for you!
I'm not the author but when I stumbled upon this app (since I was only looking for Nexus specific apps), but when I found it I was pretty damned happy that it worked as quickly and painlessly as it did!
Click to expand...
Click to collapse
did you flash a custom recovery and ROM on top of it yet? if so, did it go just fine?
orangekid said:
did you flash a custom recovery and ROM on top of it yet? if so, did it go just fine?
Click to expand...
Click to collapse
Sorry for the delay! Yes, I am running the CyanogenMod nightly and ClockWork Recovery on it !
JWhipple how did you flash the rom on your phone, I have tried this as will but I'm stuck at the ! screen.
The way I tried was to root my phone using this app (which worked)
Downloaded lasted nightly build
rename to update.zip
copy to sdcard
power phone up in bootloader
choose recovery
At this stage all I see is the andriod and a ! , it doesn't seem to flash.
I am on 2.2.0
alos how log did the flash take juat is case I'm not waiting long enough
cheers
I used RomManager to install the ClockWorkRecovery , and then installed using ClockWorkRecovery.
Cheers, just figured that out
Rom booting up now.
Can't want to try some others as well
Did you find the google addon, they don't seem to be on the Cyanogen web site?
johnw230873 said:
Cheers, just figured that out
Rom booting up now.
Can't want to try some others as well
Did you find the google addon, they don't seem to be on the Cyanogen web site?
Click to expand...
Click to collapse
Should be able to download it using rommanager as well!
Rom Manager didn't find them either
Right now I'm watching the Cyanogen logo just pop up send a lighting blot around the andriod then pop off (over and over).
I take it this is what you saw? Also been about 5 mnutes now.
johnw230873 said:
Rom Manager didn't find them either
Right now I'm watching the Cyanogen logo just pop up send a lighting blot around the andriod then pop off (over and over).
I take it this is what you saw? Also been about 5 mnutes now.
Click to expand...
Click to collapse
I saw that but it didn't take more than a minute for the first boot.
Sorted now.
Process for me was to
root phone using the software on the first page
download the lasted nightly build
copy it to sdcard
download Rom manager
Allow Rom manager to install its recovery image
DO BACKUP
boot into bootloader
start up recovery which started rom manager's recovery
clean all old data (hence why it wasn't booting correctly)
flash rom
I can also confirm it is now possible to run custom roms without unlocking your device (no padlock on bootup screen).
Thanks JWhipple
http://forum.cyanogenmod.com/topic/...r-barnes-noble-nook-color-v700-10-april-2011/
here it is
[email protected] said:
http://forum.cyanogenmod.com/topic/...r-barnes-noble-nook-color-v700-10-april-2011/
here it is
Click to expand...
Click to collapse
Thanks bro
thanked. just took the plunge from froyo to cm7 on friday! shoulda waited 2 days but hey, should be a lot quicker this time around.
looking forward to checkin it out
Holy shiznit! Looks like I'm going to have to upgrade from Froyo sooner than expected. I was wondering why dalingrin's kernel thread was so quiet this weekend. Sounds like he and the rest of the Encore team were hard at work.
Sent from my DROID2 using XDA Premium App
lol.. wouldn't matter. CM7 is constantly making updates. I usually flash every other day.
anyone know if this fixes sleep issues?
Yes, the answer is no.
Sent from my Desire HD using XDA App
samuelhalff said:
Yes, the answer is no.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
OUCH!!! The sleep thing and huge battery drain prevented me from shifting from old-but-sturdy 2.1 stock, which I charged last time...let me think...31 March.
If I had CM7 I would have charged it already 5 times.
Cm7 power problems / sleep death
This may be a dumb question but if Nookie Froyo doesn't have either of the power or sleep problems that CM7 does, would it be possible to track down and fix these bugs by comparing their source codes?
so many awesomes. but im guessing flash still dosnt work?
jabrams said:
This may be a dumb question but if Nookie Froyo doesn't have either of the power or sleep problems that CM7 does, would it be possible to track down and fix these bugs by comparing their source codes?
Click to expand...
Click to collapse
I believe they've found the problem and have fixed it in the kernel, but since it was so close to the release date, they've decided to release CM7 first with the existing kernel first, and then bug test the new one with the fix.
So we can look forward to having it fixed in the next few nightlies, hopefully.
boogerboy72 said:
so many awesomes. but im guessing flash still dosnt work?
Click to expand...
Click to collapse
Flash has been working flawlessly since mid-March in CM7. The only major issues to be worked on still with CM7 are improved Bluetooth range, eliminating the Sleep of Death (although it uses only ~1%/hour for me now while in sleep), and as with every device continued performance tweaks. There are plenty of smaller things to be fixed as well including screen shot support (which was fixed by Fattire and just needs verified/added to source), integrated button remapping (in works by Mad-Murdock), and anything else people can think to work on.
boogerboy72 said:
so many awesomes. but im guessing flash still dosnt work?
Click to expand...
Click to collapse
Flash works fine with CM7 stable.
Awesome. So far it's running great.
Sent from my NookColor using Tapatalk
Just got it installed..
So far so good. I took the plunge last night to get it installed. Well, first try after formatting system, data, and cache went ok. Then rebooted and it got stuck on "Android" text at the bottom. Simply restarted holding the "power + n", then it successfully booted into CWR. Flashed and viola. Looks good. Love the included Cyanogen wallpapers. =)
So far, no issues, but then again, I haven't played with it much. My Bluetooth option is listed and when I try to turn it on, it tries for a bit, then does nothing. Any ideas?
Oh yeah... I used the OC kernel and it seems to be fine. =P
hvuong2 said:
So far so good. I took the plunge last night to get it installed. Well, first try after formatting system, data, and cache went ok. Then rebooted and it got stuck on "Android" text at the bottom. Simply restarted holding the "power + n", then it successfully booted into CWR. Flashed and viola. Looks good. Love the included Cyanogen wallpapers. =)
So far, no issues, but then again, I haven't played with it much. My Bluetooth option is listed and when I try to turn it on, it tries for a bit, then does nothing. Any ideas?
Oh yeah... I used the OC kernel and it seems to be fine. =P
Click to expand...
Click to collapse
BLuetooth is a known issue. You need to either hard reboot, which is holding the physical power till it shuts off, or choose "Fix permissions" in Rom Manager then reboot, or a combination of both.
eozoon said:
I believe they've found the problem and have fixed it in the kernel, but since it was so close to the release date, they've decided to release CM7 first with the existing kernel first, and then bug test the new one with the fix.
So we can look forward to having it fixed in the next few nightlies, hopefully.
Click to expand...
Click to collapse
That is great news! I hope the new kernel comes ouut soon to! How or where did u hear/read about it?
Also a seperate question. The link i have for the CWR image for my sd card is bad. Not for a bootable sd. I want to nstall cm7 from scratch on the EMMC but i first need to image a CWR sd card then put cm7 stable on it. Do you have that image link?
Thanks!!!
hey guys i have somewhat of a dumb question. I have my nok running hneycomb using that dual booth method. If i wanred to flash cm7 on it, should i completely undo the dual boot? Or go ahead and boot into recovery and try installing it?
You have to first undo the dual boot, because the dual boot created a second partition (hd) on your nook color. If you don't undo the dual boot, you'll just lose that space as cm7 will overwrite the file that allows you to boot into honeycomb.
none of the widgets I downloaded are showing up on the widget list with this rom
Hello, I'm not particularly new to Android, nor am I new to the prospect of flashing roms. However, I recently flashed an upgrade of cm10.1 to my Nook HD via recovery and I'm now stuck at "Loading (SD)..." in the bootloader. Is there a specific way that CM10.1 has to be upgraded or did something just go wrong during the flash? With my other devices, you can just flash the upgrade zip from the recovery menu. Thanks in advance for the help!
and finglha
bradleyrogers89 said:
Hello, I'm not particularly new to Android, nor am I new to the prospect of flashing roms. However, I recently flashed an upgrade of cm10.1 to my Nook HD via recovery and I'm now stuck at "Loading (SD)..." in the bootloader. Is there a specific way that CM10.1 has to be upgraded or did something just go wrong during the flash? With my other devices, you can just flash the upgrade zip from the recovery menu. Thanks in advance for the help!
Click to expand...
Click to collapse
Up until the most recent .zip, I have done just what you described. Couple times my HD god hung up during that same process... I just powered down and restarted and it booted fine.
lossofsilence said:
Up until the most recent .zip, I have done just what you described. Couple times my HD god hung up during that same process... I just powered down and restarted and it booted fine.
Click to expand...
Click to collapse
Yea it has happened to me too, I just powered off with a long press on the 'N' and power button. Restarted and it worked fine.
Actually i'm on 10.1 too.
This thing happens sometime. This is normal for early alfa soft.
On first clean install test i had 3 or more times stop on Cyanogen logo. But it started work on fourth time. Same happened with second clean install too (messed Adnroid to death with my hard tests and modifications ). Power OFF/On have sometime magical power.
Well, I was able to restart the nook and flashed the zip again. It worked! However, I can't change the brightness. To be honest, I can't remember if I even tried before. So, is this just a bug or is it common? Thanks for the help guys
bradleyrogers89 said:
Well, I was able to restart the nook and flashed the zip again. It worked! However, I can't change the brightness. To be honest, I can't remember if I even tried before. So, is this just a bug or is it common? Thanks for the help guys
Click to expand...
Click to collapse
I have no problem adjusting brightness on 1/28
codya321 said:
I have no problem adjusting brightness on 1/28
Click to expand...
Click to collapse
It's weird. I couldn't get it to work without using the Tablet UI. Once I switched, it started working. Oh well, it's working fine now. Thanks for the help, you guys are the best.
CM 10.1 needs some time for settle. Then it works wthout lag
Sent from my GT-I9100 using Tapatalk 2
So I've tried installing this half a dozen times, I did a full wipe I'm using the i9305 and installing this using both kernel options for the knox based bootloader, after it completes installation it says complete, reboot the phone and I end up stuck at the Samsung Galaxy s3 black screen and it never boots into the os.
I noticed while installing this it installs some modem not sure what one it is but I thought perhaps that was the issue, to installed went straight into download mode and flashed a optus modem i've been using for my phone rebooted but still same issue.
Would appreciate some help with this, I've tried searching the thread for similar issues no such luck.
Thanks
Demonic Wraith said:
So I've tried installing this half a dozen times, I did a full wipe I'm using the i9305 and installing this using both kernel options for the knox based bootloader, after it completes installation it says complete, reboot the phone and I end up stuck at the Samsung Galaxy s3 black screen and it never boots into the os.
I noticed while installing this it installs some modem not sure what one it is but I thought perhaps that was the issue, to installed went straight into download mode and flashed a optus modem i've been using for my phone rebooted but still same issue.
Would appreciate some help with this, I've tried searching the thread for similar issues no such luck.
Thanks
Click to expand...
Click to collapse
maybe your using a old recovery?
MaHo_66 said:
maybe your using a old recovery?
Click to expand...
Click to collapse
Thanks but it's not that, I wasn't even aware of having to use the newer one for the recovery till recently and have been using the one for the old recovery even tho I have the new one... either way, I tried installing both the new and old recovery's same results.
Demonic Wraith said:
Thanks but it's not that, I wasn't even aware of having to use the newer one for the recovery till recently and have been using the one for the old recovery even tho I have the new one... either way, I tried installing both the new and old recovery's same results.
Click to expand...
Click to collapse
i see, well your 2 posts away from being able to post in development thread, you will get better help in rom thread try a full wipe anyway and install the rom with default aroma settings, maybe the problem lies in some setting you change in aroma installer..
MaHo_66 said:
i see, well your 2 posts away from being able to post in development thread, you will get better help in rom thread try a full wipe anyway and install the rom with default aroma settings, maybe the problem lies in some setting you change in aroma installer..
Click to expand...
Click to collapse
True, that could be it, except i thought of that myself and just hit next next next to the end and hit install to see if it would help matters it didn't. Yeah I tried posting there to begin with, but even if your an advanced person you have to post here first lol fun times
I did think maybe there's a newer version of philz recovery out and mine just buggers it up some how it offers to install 6.41.6 not sure what my version is.. it crossed my mind tho but I wouldn't presume that's the most likely of causes.
Demonic Wraith said:
True, that could be it, except i thought of that myself and just hit next next next to the end and hit install to see if it would help matters it didn't. Yeah I tried posting there to begin with, but even if your an advanced person you have to post here first lol fun times
I did think maybe there's a newer version of philz recovery out and mine just buggers it up some how it offers to install 6.41.6 not sure what my version is.. it crossed my mind tho but I wouldn't presume that's the most likely of causes.
Click to expand...
Click to collapse
hmm.. well philz 6.41.6 is the latest one a.t.m and roms these days need up to date recovery so you can give it a shot if you are not on philz yet. here is the latest one http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
flash it with odin then try again, hopefully this will fix your problem
MaHo_66 said:
hmm.. well philz 6.41.6 is the latest one a.t.m and roms these days need up to date recovery so you can give it a shot if you are not on philz yet. here is the latest one http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
flash it with odin then try again, hopefully this will fix your problem
Click to expand...
Click to collapse
Yeah unfortunately that didn't work either, was worth a shot tho now I can post in the proper place.
Demonic Wraith said:
Yeah unfortunately that didn't work either, was worth a shot tho now I can post in the proper place.
Click to expand...
Click to collapse
haha yeah man
CPL1 Stock Plus Rom
I would just like to share an enhanced version of stock note 4 with the only "foreign" app being the grace InCallUI mainly because I have yet to locate a guide on how to make all the buttons layout correctly and there is also very minor cosmetic changes (removed words from lock screen and extended the drop-down panel to go all the way across the screen). All features and modifications were done by me using guides from @Kamy, @ikrom, @jovy23, @asc1977, @EMSpilot, @tdunham, @daxgirl, @tkari4, @Hani K., @Misterxtc and the InCallUI ported by @Albe95. Last but certainly not least, all this was made possible with @ASSAYYED's great rom kitchen and @Ticklefish's Tickle my Android.
FEATURES
Stock kernel
Rooted
Busybox
Zip-Aligned
Deodexed
Toolbox Enabled
Flashlight in notification panel
5-way Reboot
Native Tethering
Loud Volume Warning Disabled
Brought back "once and always" buttons
Call Recording Enabled
6 in the Hotseat Launcher
TW Swipe Left Shortcut
Viper4Android - credits to @viper520
Vol up to turn on flashlight
Signatures Disabled
Write to Ext. Sd with Tibu
4 way Multi window
All apps Multi Window
CPL1 Safe Firmware Upgrade
Partial Firmware courtesy of @Misterxtc
Link to Full Firmware
ROM LINK
HERE
Flash this as well for viper- Viper SUpolicy
1.
Thank you Kevin!
Does Odin "CPL1 Safe Firmware Upgrade" include the modem?
1Xfan said:
Thank you Kevin!
Does Odin "CPL1 Safe Firmware Upgrade" include the modem?
Click to expand...
Click to collapse
Yes, the firmware includes everything except recovery and aboot. Also a few things I forgot to mention, the switch to turn on volume up for flashlight is in the display settings and to set the apps for toolbox you just long press on the toolbox icon (when activated) and then drag it up to the edit section at the top of the screen. Sorry guys I'm terrible at writing the info and summary for these roms but hopefully I can get it figured out one day.
kevintm78 said:
Yes, the firmware includes everything except recovery and aboot. Also a few things I forgot to mention, the switch to turn on volume up for flashlight is in the display settings and to set the apps for toolbox you just long press on the toolbox icon (when activated) and then drag it up to the edit section at the top of the screen. Sorry guys I'm terrible at writing the info and summary for these roms but hopefully I can get it figured out one day.
Click to expand...
Click to collapse
I understand. Please clarify for me...
I'm on pj2 unlocked/rooted. I want to stay unlocked/rooted. Do I flash the "partial".zip, or Odin the "full" ? :fingers-crossed:
When I read through hsbdr's post's, I must have 5 or six tabs open
I prefer instructions simple, and retail and Dev posts/instructions separate from each other. As well as return to "unrooted" or "keep root" posts. Many have accidentally locked their BL as a result. There is no reason to include a "return to stock-locked" link in with a custom rooted ROM post/links. Uhg
Thank you for keeping it simple for us, and all your work!
1Xfan said:
I understand. Thanks for clarifying :fingers-crossed:
When I read through hsbdr's post's, I must have 5 or six tabs open
I prefer instructions simple, and retail and Dev instructions separate!
Click to expand...
Click to collapse
Yeah it does get a little confusing. That's the main reason I just posted my own link just to make sure I'm not linking to the wrong thing. Fun fact while testing all this out, I was able to flash pj2 roms while I was on the cpl1 firmware and everything worked. I just tested one rom but it seems like once you upgrade your firmware you may not have to downgrade again if you want to go back to another rom.
kevintm78 said:
Yeah it does get a little confusing. That's the main reason I just posted my own link just to make sure I'm not linking to the wrong thing. Fun fact while testing all this out, I was able to flash pj2 roms while I was on the cpl1 firmware and everything worked. I just tested one rom but it seems like once you upgrade your firmware you may not have to downgrade again if you want to go back to another rom.
Click to expand...
Click to collapse
oooh really! So probably there is nothing new in the upgrade only that it's un-downgradable:silly:
1Xfan said:
oooh really! So probably there is nothing new in the upgrade only that it's un-downgradable:silly:
Click to expand...
Click to collapse
The first couple times I tested a firmware that I made, I was terrified of locking my bl. I flashed the one I posted and then tested for downgrade and all is good, but it doesn't seem to be necessary to downgrade again. As far as differences between them the only thing I noticed was more security stuff and some different bloatware.
Forgive me...
So the "full firmware link" (download file name: "cpl1_tar_32bit_ext4") doesn't include the recovery and aboot files(?)
1Xfan said:
Forgive me...
So the "full firmware"> link doesn't include the recovery and aboot files(?)
Click to expand...
Click to collapse
That's correct. If you flash it and let it boot you'll have your custom recovery, unlocked bootloader, no root, no busybox, cpl1 modem/kernel, and odexed system. That way if someone wants pure stock they can just flash the supersu file and your set.
She's running great for me! I installed xposed and oscar kernel and it's stable as a rock! Any chance of the additional grace apps - email, contacts, etc? Great work man!
CrazyCram said:
She's running great for me! I installed xposed and oscar kernel and it's stable as a rock! Any chance of the additional grace apps - email, contacts, etc? Great work man!
Click to expand...
Click to collapse
I just tried the email zip at this post and it worked. When I get off work I'll test those others. They all should work but if you don't want to be the guinnie pig I can do it.
So oscar works? I thought it might need an update but that's good to know.
Yes, Oscar 13 works great. I'll give the grace apps a try - thanks again!
kevintm78 said:
I just tried the email zip at this post and it worked. When I get off work I'll test those others. They all should work but if you don't want to be the guinnie pig I can do it.
So oscar works? I thought it might need an update but that's good to know.
Click to expand...
Click to collapse
For some reason after flashing grace email, I see high battery usage for email 19-30%. Tried clearing data but still see the drain. Am I missing something?
sam298 said:
For some reason after flashing grace email, I see high battery usage for email 19-30%. Tried clearing data but still see the drain. Am I missing something?
Click to expand...
Click to collapse
Honestly, I only use that app when testing it and I haven't noticed any battery drain, but I can't say I've ever checked either. I wonder if it just needs to settle in. Maybe someone that uses it more can chime in to see if it's an issue for everyone. If you want to, see if after a while it goes back to normal range and if it doesn't try to get a log and we can see what we can come up with.
Hello @kevintm78. Need a little help. I just odin'd the full firmware and now my phone won't boot. I get unfortunately System UI has stopped. I was on CPJ1 before I did this. Should I just try to restore a backup? Thanks
dhplap said:
Hello @kevintm78. Need a little help. I just odin'd the full firmware and now my phone won't boot. I get unfortunately System UI has stopped. I was on CPJ1 before I did this. Should I just try to restore a backup? Thanks
Click to expand...
Click to collapse
If Odin completed it should have at least updated your firmware. If that's the case you could just go ahead and flash the rom. All the files from the full firmware get overwritten anyway. Just make sure you do a complete wipe (everything but your sd/Ext sd) and you should be good to go.
kevintm78 said:
If Odin completed it should have at least updated your firmware. If that's the case you could just go ahead and flash the rom. All the files from the full firmware get overwritten anyway. Just make sure you do a complete wipe (everything but your sd/Ext sd) and you should be good to go.
Click to expand...
Click to collapse
Thank you. Yes I just restored a backup just fine and it's also showing my baseband is now CPL1. Now I'm going to flash your rom so I can have stock whenever I want it. Thank you for your time and help. And for the upgrade.
@kevintm78...thank you for this. I had lost 4g somewhere in all my flashing. I tried reflashing partial firmware and even restoring backups wouldnt give me 4g again.I was getting ready to go through the entire lock, unlock, root process again when I found this thread. I downloaded the full firmware in the op, flashed with flashfire, rebooted into recovery, wiped dalvik, data, cache, and rebooted system. I now have 4g back. I made a nandroid of stock, and then clean flashed LOS and still have 4g. So thankful to you!!
gcounts said:
@kevintm78...thank you for this. I had lost 4g somewhere in all my flashing. I tried reflashing partial firmware and even restoring backups wouldnt give me 4g again.I was getting ready to go through the entire lock, unlock, root process again when I found this thread. I downloaded the full firmware in the op, flashed with flashfire, rebooted into recovery, wiped dalvik, data, cache, and rebooted system. I now have 4g back. I made a nandroid of stock, and then clean flashed LOS and still have 4g. So thankful to you!!
Click to expand...
Click to collapse
Yeah man, I'm a bit of a flashaholic too and was having the same issues a while back when experimenting with data fixes and thought that I fried my sim card. Like you I tried the partial first but the only thing that got my 4g back was flashing a full stock firmware. :good: