Hello,
Simple question. Does the Realme X2 Pro support full disk encryption?
If yes, how do I activate it? I search almost every single setting and I didn't find it.
If not, do we have any information about future support of this feature?
Thank you.
Related
Hi!
I was using cryptostorage to protect my peronal files (such as photos and videos). Unfortunately it doesn't work in Wm6 devices. Is there any similar program?
Regards
how about the built in encryption program in WM6?
providence said:
how about the built in encryption program in WM6?
Click to expand...
Click to collapse
Can You tell me how can I use it?
WM encryption not as good as FreeOTFE4PDA
tom2402 said:
Can You tell me how can I use it?
Click to expand...
Click to collapse
You enable the WM built in encryption by clicking the control panel applet - see http://msdn.microsoft.com/en-us/library/bb416357.aspx for more instructions.
However, it's a bit dodgy, and it's very easy to lose your data, or have it end up unencrypted when you thought it was all encrytped. A much better solution is FreeOTFE4PDA (see http://www.FreeOTFE.org/) which is open source, and gives a lot of control over what is encrypted (and how it's encrypted), but is still pretty easy to use.
haha, good answer but do you think this guy waited 3 1/2 years for the reply?
haha (2) "However, it's a bit dodgy, and it's very easy to lose your data", that'll be a micro$oft product then
Hey guys, just wanted to share my WebIS support experience with you
I bought WebIS PocketInformant some time ago, and now installed it on my Diamond. When you switch the software to full screen, the menu is gone, and its impossible to get it back even after a restart, or soft-reset.
I go on the web and search, check the manual, their support site and FAQ, but cannot find anything. The only things I found is that some of the buttons should switch it off, and a restart of the software, which is not the case on the diamond.
So since I was not able to switch off the full screen I send a support request to WebIS:
WM Hardware: HTC Diamond - WM6Professional
Desktop OS: Windows XP
Version: Pocket informant 8.02
Synch Software: ActiveSync 4.5
Issue:
Hi,
I am unable to turn off Full-screen mode in PI 8.02
None of the buttons in the front work (home, ok, red/green phone, 4 irections, OK)
Restarting (reset) of the device does not work either...
Click to expand...
Click to collapse
They answered quite quickly:
Greetings and thank you for contacting us.
This is actually a common question and as such we have created a knowledgebase article that goes into greater detail for your benefit.
Here is the knowledgebase link:
http://kb.webis.net/
Please let us know if that does not resolve the issue.
We appreciate having the opportunity to help and service you. Please let us know if there is anything more we can do.
Click to expand...
Click to collapse
Strange. I thought I checked that one. I am going back there, and filter the search for PocketInformant and windows Mobile, and not one single question/Answer regarding the "Full Screen" mode.
So I write back:
Hi,
I have searched the knowledge base several times already before sending you this email but could not find any answer there.
I searched there for "screen" (13 answers, all something else) and browsed all the 40 Pocket informant Windows Mobil questions, but no help either.
Please be so kind to point me to the correct KB entry instead of the main page or simply tell me how to fix this via email.
Click to expand...
Click to collapse
And they reply, one day later:
Greetings and thank you for contacting us.
You've either hidden the tabs, or the left soft key assignment needs to be changed, FYI.
We appreciate having the opportunity to help and service you. Please let us know if there is anything more we can do.
Click to expand...
Click to collapse
Ok, let's see.... I do not have that software button however. and I did not hide the tabs, I just clicked on "Full screen" in the menu. And where is that FAQ entry now?
So I write back:
Dear Customer service,
thank you for that information. It does not help me to fix the problem though.
How do I unhide the "tabs"?
The device does not have a left soft key.
http://www.htc.com/www/product.aspx?id=46278
Can you please show me a way how to fix this, such as a registry entry or maybe reinstalling the software?
I still could not find you FAQ entry. Does it exist??
thanks
Click to expand...
Click to collapse
This time, the answer takes two days to reach me:
Greetings and thank you for contacting us.
Did you try changing the left soft key assignment? That is the FAQ you need, FYI.
We appreciate having the opportunity to help and service you. Please let us know if there is anything more we can do.
Click to expand...
Click to collapse
So I go to the advanced search and filter for Pocket Informant, windows Mobile and search for "Soft key" - nothing.
I write back:
Did you read my last email?
I assume that with soft keys you talk about a blank hardware button that has its function assigned by the software?
My device does not have soft keys!
http://www.htc.com/www/product.aspx?id=46278
The device only has a home, return/exit , call, hang up and direction/OK keys.
Also, your FAQ does not say HOW to change that key in case it exists. You also do not mention which registry editor to use.
It does not mention the full screen issue in one word either, how is one supposed to find it?
This is one of the worst support cases I ever had.
Click to expand...
Click to collapse
Now, I get the following answer:
Greetings and thank you for contacting us.
Thanks for your email. Your question is best found in the product documentation that was installed with the software or found on our download site in PDF form. On our support page there is a form to search all of our documentation quickly and read it via PDF or HTML: <http://www.pocketinformant.com/support.php>. We ask that you look there first because the instructions come with screenshots and usually is able to help you better. If you have already looked through the documentation and cannot find what you're looking for, it may be a feature request or bug - so let us know.
Direct links to the PDFs can be found here:
http://download.pocketinformant.com/
We strive to provide the best service we can and if our manual is not doing its job, we would appreciate feedback on that. Let us know if there is any important content missing, readability issues, or hard to find information. We'll be happy to take such feedback to improve the documentation as quickly as possible. Thank you.
We appreciate having the opportunity to help and service you. Please let us know if there is anything more we can do.
Click to expand...
Click to collapse
How is that supposed to help? Isn't that what I was asking for since the beginning? that they help me with the problem?
By now I did a hard reset and reinstalled the software.
Of course, I am not touching the full screen button again. And I am not contacting their support again for troubles either.
Clearly, the Diamond has a disadvantage in applications that rely on the soft buttons to work. There should be a tool to simulate the buttons with the volume buttons or else to fix that.
I've just had a look on their forum and this seems similar to your problem (and they recommend a reg edit solution)
see post 2 http://www.pocketinformant.com/Forums/index.php?showtopic=12917
Hope this works for you
thanks for the help and pointing this out to me.
Maybe you could post back here if the reg edit works? It might help someone else with the same problem or considering whether to buy the application.
well... I fixed it before with a hard-reset and currently I do not plan to use the full screen anymore since only regedit can undo it, and thats simply too complicated. If I try it and it does not work, I have to hard-reset the device again.
But the thread you have from the WebIS the person had it fixed through it, so I assume it should work
I had this issue on my Touch Dual, using a hardware button (like camera) takes it out of fullscreen mode...
Their support was pretty useless for me also, I found the answer on another forum...
A solution for the Diamond is to assign your Send key (Button 1(hold)) as <Left Softkey>.
Yeah, our support guy has been a bit flaky lately. Honestly I think he just got tired of things after seven years. Must be why he resigned at the end of July. I'm sorry that that happened - though. Unfortunately it doesn't make real-world sense to use other buttons like volume control to get out of full screen mode. The Diamond is just not a good full screen mode device without some sort of gestures or other method to get out of it.
I'll definitely be looking for a way to add a button or something as a way to get out of full screen.
Reg edit
The regedit works on the Diamond.
I've exported the PI-registry, edited the "FullScreen"=dword:00000001
into "FullScreen"=dword:00000000
and imported the registry ==> problem solved
Good day,
I saw a thread here about adding chinese input method in SGS 2. Is that method applicable to SGS 1? Is there any step by step to add it? I pretty much prefer samsung's input method. I used to have it, but after rooting, I can't seem to get any roms with chinese input, I got SGS I9000 and running on the recent MIUI rom.
Thanks
Try Smart Keyboard Pro with Chinese for Smart Keyboard.
hand writing method?
Thanks Pandur2000 for the reply.
Follow up question, what if i would like hand writing mode of input, is there a way to add this feature?
thanks again.
A little search in the market or google would help you faster then us > Scut gPen > https://market.android.com/details?id=net.hciilab.android.cappuccino allows handwriting recognition of chinese characters.
Thanks again bro.
Ill search the market i thought that the input method is in the system thanks for educating me. learned many from you tough...
Hello everyone,
First of all excuses in advantage if my English won't be proper.
I'm a new user and I've searched (hoping in the right way) if this question had already been answered -and found that it hadn't.
So I'm opening this thread to know if someone with more experience already knows if the new update to WiINDOWS PHONE 8.1 can *TOLERATE* INTEROP UNLOCK.
In my specific case I've interop unlocked my Ativ S - thanks to GoodDayToDie, Wolf and the other Devs' guides and tools -, now I'm on GDR3 but some of the features that used to work with GDR2 don't work anymore, But this isn't the point..
My question is: "Given the *nature* of interop unlock and its way of managing the features that it allows us to use, will it be compatible -in your opinion- with the new OS? (I'm talking overall about the third tile row hacking, which should be now manageable directly from the normal settings of the phone, do you think they could conflict?)
Regards.
Gidannifico.
Your english isn't bad, you're completely understandable.
Normally, I wouldn't be able to answer this question, it might be possible for Samsung/Microsoft to patch the interop unlock (I really don't know, correct me if I'm wrong), but wolf just posted he found yet another method to interop unlock Samsung devices, and he'll release the unlock after WP 8.1. (link: https://twitter.com/xda_wolf/status/455374020347965440). So, 8.1 should be safe and good to go for you - but I don't know about future updates.
EDIT: The 3rd tile column is just a registry entry, up to now it was only editable with interop unlock, and the new option should just toggle that entry, so there should be no conflicts whatsoever
th0mas96 said:
Your english isn't bad, you're completely understandable.
Normally, I wouldn't be able to answer this question, it might be possible for Samsung/Microsoft to patch the interop unlock (I really don't know, correct me if I'm wrong), but wolf just posted he found yet another method to interop unlock Samsung devices, and he'll release the unlock after WP 8.1. (link: https://twitter.com/xda_wolf/status/455374020347965440). So, 8.1 should be safe and good to go for you - but I don't know about future updates.
EDIT: The 3rd tile column is just a registry entry, up to now it was only editable with interop unlock, and the new option should just toggle that entry, so there should be no conflicts whatsoever
Click to expand...
Click to collapse
thank you 4 the answer Thomas,i'll hit the 'thank button' as soon as I turn on My pc,now i'm with the Ativ-beaSt-
If I undestrood what you mean the most reasonable thing to do Tomorrow is to hard reset My Device in Order not to get any possibile 'complication' with the update,then upgrade to WP8.1 and then wait 4 wolf's 3rd Method release..didn't Know it cause I don't have a Twitter account-poor me-.
in any case My device'll be upgraded and if I'll feel the needing to go back I can Always flash again GDR2(I think there won't be any problem to flash even with WP8.1)
Regards and thank you again.
Gidannifico
is it possible to get rid of fingerprint animation ?
No. Please use the search function as this has been asked previously.
Always good to see such a positive answer.
You can turn the guidance indicator for the fingerprint scanner off on Samsung’s S10 models so it’s not a daft question. I’d personally quite like to turn it off as it’s pretty annoying the way it lights up whenever you move your phone, and I know where to put my finger After a while so it’s not even that helpful.
I’ve been on these forums for well over a decade and it still annoys me when people tell other people to use the search function, as if that is necessarily always reliable, and as if their comment on using the search function didn’t take as much time as just giving and answer would. What happened to community spirit?
Can we stop this back and forth.
Please answer the OP if you can if not point the OP to right direction.
Thanks
SacredDeviL666.
Changing/turning off the animation is not possible on the device. Some smartphone manifacturers like Oppo allow you to change the amation style, this is not possible for us.