Related
somewhere on the forum... i saw this picture of a tilt back cover, and the speaker was a circle, not a square, and the camera cover looked really nice, it had a metal cover to prevent scratches.
where can i find this?
you sure you weren't seeing the back of the Touch Polaris/Orbit 2?
we can made a camera friendly back cover ourselves
Hi All,
I am wonder if anyone would like to join my project of making a camera friendly back cover for our Kaiser.
I am a product designer in Hong Kong and also a Kaiser user. I know a local factory that produce aftermarket cases for PDAs, to make a back cover is not a hard job at all. All I would like to know is how many Kaiser would like to have this new back cover.
Elton
I'd be interested but depends on the quality of the cover of course. Also maybe we could use some really good glass on the rear cover over the camera, such as polarized glass with anti UV and flare coating, any optician should be able to make it, but might work out a little expensive for the glass alone.
aksd said:
I'd be interested but depends on the quality of the cover of course. Also maybe we could use some really good glass on the rear cover over the camera, such as polarized glass with anti UV and flare coating, any optician should be able to make it, but might work out a little expensive for the glass alone.
Click to expand...
Click to collapse
you need a photography quality glass for good quality photo. Plus in order to fit in to the original back cover, the glass needed to be really thin, that's another challenge. That's why some people in the forum prefer to take the plastic out.
regarding to the quality, the factory is a very experienced one, a simple back cover is too easy for them. All I worry is the cost and how we can spread them out evenly.
How hard would a "flip" cover be? My previous phone, Sony W810i had no protection for the lens, other than the clear plastic area for the lens. The
K750i had a "flip" cover, which fit the 810i like a glove.
How reasonable would it be, instead of a glass lens, to just produce a cover with a simple flip open or slide cover for the lens? Even with a glass area for the lens, you will still get stains, fingerprints etc.
I'd vote for a rear cover with a slide-open cover over the camera. This would allow the camera to be protected from dust and when open, don't use any additional glass, the pictures would be much sharper!
It would have to be a good design that could withstand repeated open-close cycles.
p51d007 said:
How hard would a "flip" cover be? My previous phone, Sony W810i had no protection for the lens, other than the clear plastic area for the lens. The
K750i had a "flip" cover, which fit the 810i like a glove.
How reasonable would it be, instead of a glass lens, to just produce a cover with a simple flip open or slide cover for the lens? Even with a glass area for the lens, you will still get stains, fingerprints etc.
Click to expand...
Click to collapse
I agree. The lens glass needs some sort of protection.
Nokia's N-95 puts the lens at the hinge where no one puts their finger. The HTC Kaiser/Tilt is in a very bad spot for fingers and setting it down into junk or against a sweaty (i.e. wet) shirt pocket.
Also, you might need some bumps on the back to raise the phone a bit since they managed to put the speaker on the back which is about as effective as ....
The back cover gets a bit hot at times too. Don't know what can be done about that.
firstbuddha said:
you sure you weren't seeing the back of the Touch Polaris/Orbit 2?
Click to expand...
Click to collapse
im sure. i know i saw it, but i dont know if it was edited, but it looked pretty real to me.
it looked almost identical to the kaiser's back, except instead of a square speaker, it was circle, and the camera had something better to protect it.
I meant a cover with a glass lens. Its always nice to have 2x times the protection
mikeeey said:
im sure. i know i saw it, but i dont know if it was edited, but it looked pretty real to me.
it looked almost identical to the kaiser's back, except instead of a square speaker, it was circle, and the camera had something better to protect it.
Click to expand...
Click to collapse
please let us know where you saw that cover. It would be nice if we can just pay for it.
Have you thought of using the invisible shield? this is cut with perfection, prevents scratches and marks on the device, and has a very accurate cut-out around the GPS and Camera recess.
www.shieldzone.com
flashy said:
Have you thought of using the invisible shield? this is cut with perfection, prevents scratches and marks on the device, and has a very accurate cut-out around the GPS and Camera recess.
www.shieldzone.com
Click to expand...
Click to collapse
I am not sure about putting another piece of plastic in front of the camera would be a good idea to improve the quality of the photo.
Anyway, I have contacted the factory about this project, they will let me know the cost in about two days. In the mean time, feel free to throw in new design idea.
this back cover should be great!!, i dont mind even the need os using my fingernails for sliding the protector, the fact is that camera lens will be protected in my pocket!!
You can count me in for the sliding back cover for the camera, that would be perfect!
pepeto2001 said:
this back cover should be great!!, i dont mind even the need os using my fingernails for sliding the protector, the fact is that camera lens will be protected in my pocket!!
Click to expand...
Click to collapse
when did i say cover the camera? i said it's been cut around it.
I doubt you will find better to be honest. Without looking silly. It looks like new all the tiem with my shield on.
pepeto2001 said:
this back cover should be great!!, i dont mind even the need os using my fingernails for sliding the protector, the fact is that camera lens will be protected in my pocket!!
Click to expand...
Click to collapse
no, I don't think finger nail is a good idea. If space is allowed, I hope to make a sliding door that can be opened by finger instead of finger nail.
Anyway, let's wait for the quote from the factory first.
Im interested too!
quotation received, but....
The factory replied with a quote but they made a mistake. The quote is for 1000 pieces of battery cover. I don't think we have that many people who would be interested in it, so I ask for a smaller quantity quote. They will get back to me tomorrow.
stay tune!
helpme said:
The factory replied with a quote but they made a mistake. The quote is for 1000 pieces of battery cover. I don't think we have that many people who would be interested in it, so I ask for a smaller quantity quote. They will get back to me tomorrow.
stay tune!
Click to expand...
Click to collapse
NO, NO, NO....
PM me with the 1000 piece price. I'm sure I could distribute these here in the US.
Hi, under the recommendation of several people, I removed the stock thin film that protected the lens of the back camera. Is there a good way to protect it from scratch? Right now, I am using the SGP Ultra Capsule Series case as shown in the URL.
http://www.spigen.com/sgp-samsung-galaxy-note-case-ultra-capsule-series.html
Thanks.
hajime_android said:
Hi, under the recommendation of several people, I removed the stock thin film that protected the lens of the back camera. Is there a good way to protect it from scratch? Right now, I am using the SGP Ultra Capsule Series case as shown in the URL.
http://www.spigen.com/sgp-samsung-galaxy-note-case-ultra-capsule-series.html
Thanks.
Click to expand...
Click to collapse
That's overkill, just buy the Flip Cover, it will add 1mm around your camera lenses.
Since the Device sees the outside world through the Camera , using a layer on the camera will affect the amount of light getting in to camera and hence the quality of the image captured by the device will be low. So using a layer on the camera for protecting it from scratches is not a good option , it will protect the camera from the scratches but it will destroy the sole purpose of the camera. So alternative option will be using a case that can make the camera grooved-in and hence it can give considerable protection as camera surface will be grooved-inside the shell case.Choose the case wisely to get this kind of setup.
The glass covering the camera lens is almost flush with the aluminium border and the plastic back, so when you lay the phone on a flat surface it will almost touch it.
There are very thin cases, that add only 1 mm thickness to the phone and help separate the lens cover from the desk.
I'm trying to use InvisibleShield back proctector, it adheres well to the back cover, after a few days drying it does not seem that it's going to peel-off, and it helps maintaining the camera cover from touching the table.
hajime_android said:
Hi, under the recommendation of several people, I removed the stock thin film that protected the lens of the back camera. Is there a good way to protect it from scratch? Right now, I am using the SGP Ultra Capsule Series case as shown in the URL.
http://www.spigen.com/sgp-samsung-galaxy-note-case-ultra-capsule-series.html
Thanks.
Click to expand...
Click to collapse
What you already have is sufficient. Its not that easy to scratch the camera lens, and anything you put in front of it will in some way spoil the quality of your shots. Its not as though there is something available like a UV filter that you would use on an SLR camera. My advise, is just go out and take pictures.
I bought the Real look screen protector from amazon and it comes with 4 tiny screen protector for the back camera. Best imo, but I haven't tried any others
I also got scratches there. Sammy you disappointed again
Get a case with camera shutter.
Sammy used cheap material again, it should have been gorilla glass.
Boy124 said:
I also got scratches there. Sammy you disappointed again
Get a case with camera shutter.
Sammy used cheap material again, it should have been gorilla glass.
Click to expand...
Click to collapse
Just out of curiosity, what effect has that had on your picture quality? It shouldn't be that noticeable, if at all, unless its big damage that is. Usually. small scratches cause a 'softening' of the focus, but shouldn't be that apparent, unless your really looking for it. I'm not making excuses for samsung though, and indeed they would probably call it a feature, where your phone will take increasingly romantic soft photographs over time.
bigstarrynight said:
Just out of curiosity, what effect has that had on your picture quality? It shouldn't be that noticeable, if at all, unless its big damage that is. Usually. small scratches cause a 'softening' of the focus, but shouldn't be that apparent, unless your really looking for it. I'm not making excuses for samsung though, and indeed they would probably call it a feature, where your phone will take increasingly romantic soft photographs over time.
Click to expand...
Click to collapse
Got 3-4 scratches at the edge, so it did not affect picture quality.
I always used to put the phone face-down but still got scratches.
Boy124 said:
Got 3-4 scratches at the edge, so it did not affect picture quality.
I always used to put the phone face-down but still got scratches.
Click to expand...
Click to collapse
Its about what I expected. I wouldn't worry too much. I have an old clam phone and that is scratched to hell, but the pics don't show any noticeable effects. I know its far from a like for like comparison. Also, we used to scrub uv filters with scotch bright to make our own soft focus filters. You would be amazed at how much 'scratching' we had to do before we started to notice any effect. I know you want to treasure your investment, but I would get on and use it to the full. :good:
i got 4 scratches there.. can lense be replaced?
Sent from my GT-N7000 using xda premium
My Zenus PrintFolder protects the camera nicely. Love this case!
Sent from my GT-N7000 using xda app-developers app
Just made a rectangular piece of cheap plastic nd glued another plastic foldable holder for my x play. So now during photo time unfold nd zip down nd den zip up. Easy DIY nd works like a charm...
Just wondering if anyone has them applied to your phone. I believe Nillkin sells tempered glass covers for the camera lenses. Anyone care to share pics/reviews?
My camera lens is super scratched and it affects my pictures. My warranty replacement should arrive tomorrow or soon. I don't want to keep the phone if the lens will continue to be an issue. My DUO lens and the rest of the phone are in perfect condition.
its_dale said:
Just wondering if anyone has them applied to your phone. I believe Nillkin sells tempered glass covers for the camera lenses. Anyone care to share pics/reviews?
My camera lens is super scratched and it affects my pictures. My warranty replacement should arrive tomorrow or soon. I don't want to keep the phone if the lens will continue to be an issue. My DUO lens and the rest of the phone are in perfect condition.
Click to expand...
Click to collapse
You got a warranty replacement because of the scratched camera lens?
My lens also has some scratches even though I handled the phone like a raw egg... I simply don't understand why HTC uses the cheapest kind of plastic to cover the camera lens, when the rest of the phone is premium quality?!
I bought the Nillkin protector and used the camera lens protectors as well.
See my post here: http://forum.xda-developers.com/showpost.php?p=52353778&postcount=384
I put the Nillkin protectors on the device as soon as I could, dunno if they'll affect the marginal camera in this thing, but the inevitable scratches, which your experience bears out, sure would.
Squpix said:
You got a warranty replacement because of the scratched camera lens?
My lens also has some scratches even though I handled the phone like a raw egg... I simply don't understand why HTC uses the cheapest kind of plastic to cover the camera lens, when the rest of the phone is premium quality?!
Click to expand...
Click to collapse
yeah. I complained to ATT about how it's susceptible and I shouldn't have to pay insurance for a manufacturer error blah blah. HTC referred me to the carrier I told them.
I use the camera lens protector thst came with the Nilkin glass protector
TieNN89 said:
I use the camera lens protector thst came with the Nilkin glass protector
Click to expand...
Click to collapse
How is it? Mine should be in the mail when I get home later.
its_dale said:
How is it? Mine should be in the mail when I get home later.
Click to expand...
Click to collapse
It's pretty good I'm happy with it
Except they could of made the protector a mm or so bigger and it could of covered the whole camera hole but I suspect they didn't so it would be easier to stick on
its_dale said:
Just wondering if anyone has them applied to your phone. I believe Nillkin sells tempered glass covers for the camera lenses. Anyone care to share pics/reviews?
My camera lens is super scratched and it affects my pictures. My warranty replacement should arrive tomorrow or soon. I don't want to keep the phone if the lens will continue to be an issue. My DUO lens and the rest of the phone are in perfect condition.
Click to expand...
Click to collapse
My camera lens got a large scratch on it within days of getting it, seems it's the same cheap soft plastic lens cover like all other HTC phones use, such a shame.
Lucky for me the scratch was just off the centre and doesn't seem to notice on picture quality.
To try stop any more scratches I got a martin fields screen protector, as they come with 4 x lens covers, 2 for each rear camera.
I don't notice any loss of picture quality with the protectors over the lenses, so is well worth doing.
I really wish someone would start making lens protectors on their own
Squpix said:
You got a warranty replacement because of the scratched camera lens?
My lens also has some scratches even though I handled the phone like a raw egg... I simply don't understand why HTC uses the cheapest kind of plastic to cover the camera lens, when the rest of the phone is premium quality?!
Click to expand...
Click to collapse
How do people do this? I don't understand. I work in the oilfield... Lots of dirt, dust, and sand and have never scratched the lenses. Are you guys using the device naked? Not sure how else it would be possible.
tkoreaper said:
How do people do this? I don't understand. I work in the oilfield... Lots of dirt, dust, and sand and have never scratched the lenses. Are you guys using the device naked? Not sure how else it would be possible.
Click to expand...
Click to collapse
Exactly what I want to know too. How is it possible? Never happened to any of my other phones. They wouldn't be replacing it for free if it wasn't possible.
It happens when you try to clean the lens when it has fingerprint smudges on it. Because it's inset, it's much more difficult to clean. I ordered a Nilkin tempered glass protector mainly just for the camera protection.
Sent from my HTC6525LVW using Tapatalk
Div033 said:
It happens when you try to clean the lens when it has fingerprint smudges on it. Because it's inset, it's much more difficult to clean. I ordered a Nilkin tempered glass protector mainly just for the camera protection.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Same here. It arrived, but waiting for the replacement phone to come in
Div033 said:
It happens when you try to clean the lens when it has fingerprint smudges on it. Because it's inset, it's much more difficult to clean. I ordered a Nilkin tempered glass protector mainly just for the camera protection.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
What are you using to clean it???!
A paper towel is *not* suitable at all!
Only a microfibre cloth OR lens pen should be used.
In a bind something soft-ish, i.e. terrycloth, could be used.
But never use a paper towel or napkin. Way too harsh for AR coatings, for example.
If the cover is loaded with silica dusts, these should be removed with a lens pen before using any kind of material to clean.
Otherwise you will wind up with tiny scratches that work similar to a diffraction grating filter creating "star" effects around pinpoint sources, lines and and other aberrations that will definitely mar your images.
The only remedy at that point is to replace the cover or remove it completely which puts the actual camera objective lens at risk of exposure.
Slickwraps are considering making lens protectors
http://forum.xda-developers.com/showthread.php?p=52455851
I had an M8 replaced (unrelated issue) which had a bunch of scratches on the main lens cover. I treated it exactly the same as my M7 which didn't get scratches in the 6 months I owned it. I defs think HTC has changed something.
Anyway I got a lens protector with the Nillkin screen protector I bought for the replacement handset, but I mucked up the install so I took it off. Using the Nillkin one as a template, I cut out a circle from a spare M7 screen protector I had lying around. It's not pretty but it does the job perfectly.
Michealtbh said:
Slickwraps are considering making lens protectors
http://forum.xda-developers.com/showthread.php?p=52455851
Click to expand...
Click to collapse
It's Live Now..
Thanks!
Weston
cpufrost said:
What are you using to clean it???!
A paper towel is *not* suitable at all!
Only a microfibre cloth OR lens pen should be used.
In a bind something soft-ish, i.e. terrycloth, could be used.
But never use a paper towel or napkin. Way too harsh for AR coatings, for example.
If the cover is loaded with silica dusts, these should be removed with a lens pen before using any kind of material to clean.
Otherwise you will wind up with tiny scratches that work similar to a diffraction grating filter creating "star" effects around pinpoint sources, lines and and other aberrations that will definitely mar your images.
The only remedy at that point is to replace the cover or remove it completely which puts the actual camera objective lens at risk of exposure.
Click to expand...
Click to collapse
I used to use paper towels to clean my camera lens, but after reading about how you can remove slight imperfections and scratches by using abrasive materials, I've switched to sandpaper almost exclusively. I tried using a napkin once, but the barbecue sauce (I thought the napkin had dried) got stuck in between the cracks of the lens and device. Needless to say, I don't use napkins anymore.
/s
I've never heard of a "lens pen" as I have the photographic skill of an untrained rock, but luckily am familiar with microfiber cloths. However I don't see the value in carrying one around as I had no such need with my GS3, a device made almost entirely of cheap plastic. I had no issue using the cloth from my T-shirt and pants pockets (soft, light material) to clean the screen and lens.
The current scratching is minimal and is not affecting my photos. But I know that unless I act now I will have those issues you mentioned. Whether its between buying a lens pen or carrying a microfiber cloth around, I'd much rather just slap a protector on it and call it a day.
Sent from my HTC6525LVW using Tapatalk
i just ordered this incase the Nillkin doesn't work out
http://www.slickwraps.com/HTC-One-M8-Lens-Protector-p/sw-htconem8-lenspro.htm
The glass covering the camera lens at the back is protruding so putting it down on any surface would make the glass touch it...how do you guys keep it from scratching?
koppee1 said:
The glass covering the camera lens at the back is protruding so putting it down on any surface would make the glass touch it...how do you guys keep it from scratching?
Click to expand...
Click to collapse
A case that's raised more than the camera is what I'm doing. Have done this for years without ever having my lens scratch.
Sent from my SM-N910U
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
When I pick mine up from the shop I'll be leaving the plastic on - my S4 has a gaping scratch across its camera lense!
Normally there should be no need to worry unless you intend to drag your phone across a rocky road. It's protected by a veryt scratchresistant glass, simlar to sapphire glass. It can stand a heavy beating and still perform.
The only real problem is fat from your fingers smearing onto the protective glass, this will cause weird looking arefacts with highlights so make sure you keep it clean.
/ Magnus
lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
The plastic never covered over the sensor itself, only the outside edges.
Nitemare3219 said:
The plastic never covered over the sensor itself, only the outside edges.
Click to expand...
Click to collapse
Correct. Good protection. Or you could get the Nillkin Amazing H+ 9H Hardness Anti-Explosion Tempered Glass*for the note 4, it comes with 2 mini tempered glass camera lense protectors
Though I have not used any case or screen protector for the front screen, I have cut exact size glossy screen protector for the camera lens. I developed lots of scratches in S2 lens, from then on I started protecting camera lenses.
Note 4
If you look carefully the platic frame around the glass is just slightly above the glass so really the glass doesn't make contact with a flat surface
The Samsung s-view case is just big enough to keep the lens from touching. It's a good option if you are concerned about the lens getting scratched and want front of phone protection.
If the plastic cover doesn't affect the photos then chances are the odd scratch won't either..
Wife has S5 and glass on the lens seems pretty tough! No scratches yet!
When not using my Note 4, I shoot pictures with high end Nikon glass (lenses). Some will say to put a plain UV filter on the lens as a means of protection, never go naked. Others will ask why would one put an $80 piece of glass in front of finely tuned and crafted $2,500 piece of glass? Additionally, all those large sport photographer lenses you see taking photos.......no filters are made that size, they use hoods which extend several inches from the front of the lens as a means of protection. Now, given the camera in the Note 4 is not a high end DLSR you may not see the difference all that much, depending on the shot. However adding some form of adhoc protector over the camera will certainly cause some form of photo degradation.
If you have a phone case where the camera lens is recessed you should be perfectly fine if: (1) you pay attention how and where you place it down and (2) keep it out of your pants, bags...etc that hold keys and your loose change..etc.
Remove any added plastic or glass in front of your lens; take clearer and sharper pictures!
Goodluck
lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
I didn't even know there was one those lol I put a skinomi skin on mine hoping that it's raised just enough xD
---------- Post added at 01:45 PM ---------- Previous post was at 01:39 PM ----------
lawtq said:
I'm keeping the protective little plastic cover over it. Took it off to see if any difference in pic quality and there was none.
Click to expand...
Click to collapse
I didn't even know there was one those lol I put a skinomi skin on mine hoping that it's raised just enough xD
Well, my first tip would be to not place your note 4 on a textured surface, press it down into the textured surface and then rubbing it vigorously against it, with your pressure RIGHT on the lens.
Other than that, just use it normally. Dont keep it in a bag of quarters, dont hack at it with nails, dont keep it with your keys in a pocket... The usual nobrainer things.
Should be totally fine. When I place it on a table, the lens doesnt touch the table.
Magnus3D said:
Normally there should be no need to worry unless you intend to drag your phone across a rocky road. It's protected by a veryt scratchresistant glass, simlar to sapphire glass. It can stand a heavy beating and still perform.
The only real problem is fat from your fingers smearing onto the protective glass, this will cause weird looking arefacts with highlights so make sure you keep it clean.
/ Magnus
Click to expand...
Click to collapse
/thread - really, the glass on the camera lens is the strongest glass you will find on your mobile device - applies to any phone.
Couldn't resist...cut out an extra screen protector and stuck it on the camera glass lol
lawtq said:
Correct. Good protection. Or you could get the Nillkin Amazing H+ 9H Hardness Anti-Explosion Tempered Glass*for the note 4, it comes with 2 mini tempered glass camera lense protectors
Click to expand...
Click to collapse
Never heard of this before.. Have Otterbox but realized my camera lens for smashed today while outside doing yard work... This what you use? Installation hard? Got URL? Thanks in advance.
DrDank said:
Never heard of this before.. Have Otterbox but realized my camera lens for smashed today while outside doing yard work... This what you use? Installation hard? Got URL? Thanks in advance.
Click to expand...
Click to collapse
I liked it. Gad the halo effect though unfortunately. But loved the 2 little camera screen protector too! Easy install.
Sorry, don't d have much time to search, url anyone it could i get camera protection for otterbox?
Because this is my first phone with a protruding rear camera so I started to worry about protection. Are there any protection of rear camera in modern phones?
Piospi said:
Because this is my first phone with a protruding rear camera so I started to worry about protection. Are there any protection of rear camera in modern phones?
Click to expand...
Click to collapse
Get a case that protects it.
The Spigen case protects the camera nicely
cd993 said:
The Spigen case protects the camera nicely
Click to expand...
Click to collapse
I have this case but I was thinking about some glass for rear camera
Piospi said:
I have this case but I was thinking about some glass for rear camera
Click to expand...
Click to collapse
Ah I see!
Then perhaps this is what you may like:
https://www.ebay.co.uk/itm/193457244169
AUNEOS Xperia 1 II Camera Film
I got this.
Anything you put on camera glass would mess with Zeiss coating. It's counter productive tbh to pay for a feature (i.e. Zeiss coating) but then handicap it. I'd just get a good case with raised edges around cameras to protect and leave the glass alone
mehdi_s82 said:
Anything you put on camera glass would mess with Zeiss coating. It's counter productive tbh to pay for a feature (i.e. Zeiss coating) but then handicap it. I'd just get a good case with raised edges around cameras to protect and leave the glass alone
Click to expand...
Click to collapse
How can it mess with the coating ? as its inside on lenses and not on glasss on the back ?
Marvido said:
How can it mess with the coating ? as its inside on lenses and not on glasss on the back ?
Click to expand...
Click to collapse
Lens glass and coating is extremely important for the quality of the light that passes through. By putting another layer of glass or plastic or whatever on top of already coated and optimized glass, you are interfering with flow of light
mehdi_s82 said:
Lens glass and coating is extremely important for the quality of the light that passes through. By putting another layer of glass or plastic or whatever on top of already coated and optimized glass, you are interfering with flow of light
Click to expand...
Click to collapse
Well i dont know if it has something to say or not...no idea about stuff like that tbh. But i bet its better than risk a scratched lense glass from pocket sand, a drop and etc...
Marvido said:
Well i dont know if it has something to say or not...no idea about stuff like that tbh. But i bet its better than risk a scratched lense glass from pocket sand, a drop and etc...
Click to expand...
Click to collapse
Agree.. I have already stick a transparent film on my rear camera.. no issue. happy with my Xperia 1 II
In fact i'm looking for something like this:
http://nillkin.org/search/?search=CamShield%20&limit=100
But they don't have for Sony brand. I have already sent a message to the website but no reply at all.
If i got transparent case (because i like the original purple mirror color) with a slider protection for the rear camera, i will definitively remove the film protection then.
If anyone know a brand similar to the CamShield type, it will be great. Thanks
I bought this glass camera protector from Japanese Amazon. Shipping was actually really fast to the US. It fits the camera module perfectly. It does attract fingerprints a bit more than the camera glass itself but it's very easy to wipe clean.