Hi all,
I have trouble with my X2 Pro (CN version): after flashing system image and trying to reboot, the phone is completely frozen. Just the charging-sign is on the display. No response to the power button or Vol Down/Power to enter the bootloader.
Anyone who can help?
Thanks!
Hold in Volume UP + Power Button until it buzz, then let go.
It should take it out of the frozen state
Great, thanks. I didn't try this work around long enough
Furthermore, when I restarted the phone, Android 10 GSI Rom appeared as intended.
Thanks
Related
So.... Been playing with this for the last two days trying to root this phone.
I've rooted a few other phones, so I do have experience with the overall process, but I am unable to even boot this phone into Recovery. I have tried booting into recovery by holding down both volume buttons + power and from adb terminal "adb reboot recovery."
Neither method works. The phone will boot (or reboot from adb) and brings up the "at&t World Phone" screen and then nothing else appears. The first time I tried this it actually wouldn't boot up even after pulling the battery and trying to start normally, it still sat at the same screen. I let it sit all day today at the screen until the battery died. I was finally able to get it to boot up earlier.
If anyone can help, that'd be greatly appreciated. Let me know what info I need to add.
I usually just press and hold both volume buttons and power then release just the power button and keeping the volume buttons still pushed on the 2nd time the white at&t screen pops up... Works for me every time.
Sent from my SAMSUNG-SGH-I897 using XDA App
hold volume up+down and power key btw this is wrong section to post supposed to be in general
Oh sorry, didn't realize it was supposed to be posted in general.
I've tried the Volume Up/Down + Power and this does not work, as I stated originally.
I've also tried to do it from the adb shell, which also does not work.
Does anyone have any idea why I can't access recovery?
I"m having a similar issue. Holding volume up+down and power and releasing in any combination just boots the phone up. If I just hold volume up+down and power the phone alternates between the AT&T World Phone screen endless.
Yes u have to let go of the pwr button when the phone screen turns on
Sent from my SAMSUNG-SGH-I897 using XDA App
I've tried just about every combination of the Volume Up/Down + Power and no luck.
I've also tried the following ADB commands, with no luck, it just reboots the phone:
adb reboot recovery
adb reboot-boatloader
When I hold Volume Down + Power I get the a Yellow Triangle with a Android guy with a shove with the text "Downloading... Do not turn off Target!!!"
When I hold Volume Up + Power I get an Android guy with the following text: "POWER RESET or UNKNOWN UPLOAD MODE"
For kicks, I tried to to flash a rooted update.zip via the Volume Down + Power way with the Samsung update software, the same way I have done with the Samsung Moment. Wasn't sure if it'd work, but worth a try.
Any one else have any ideas or suggestions?
Phishie, do you have a final release version? Or anything special about the phone you have?
I just press the two volume buttons first (to make sure theyre pressed before you hit power), then press the power button, as soon as the screen turns on, I let go of everything and it works just fine, no need to have ridiculously complicated instructions.
The trick is to make sure both volume buttons are pressed BEFORE you hit power. Then release. Easy as pie
Also, if you guys are having too much trouble, just download the one click root/unroot. It will run, boot your phone into recovery, then all you have to do is scroll to install packages with volume key and hit power. Done.
Trust me, I am making sure I'm pretty the keys completely. I've literally tried it fifty times by now.
And I've also tried the One Click Root. This does not boot the phone into recovery either. It just sits at the AT&T World Phone screen forever and will actually get stuck here and will not boot up normal even by pulling the battery and powering it back up. It'll just get stuck at the for-mentioned screen. I have to connect it to adb and reboot it there to get it out of the loop it's stuck in.
that doesnt sound good. Maybe you need to try a factory reset? are you running stock rom and everything?
When I first got the phone I did a factory reset.
Yea, it's completely stock to my knowledge. But I have a different ROM than the final release version that everyone else has. This is a pre-production device.
same problem
I try all the combos as well, no luck, would the combos be different for 2e vs 3e recovery?
I try combo, it powers on, the same thing happens, the at-t comes up, goes for a second, then screen brightens, wait a bit and then the home row buttons light up, hangs there... doesnt matter which kernel or which rom I flash, same thing, adb and other stuff wont work as they need usb debugging enabled, which mine isn't.
Is there a way to mod the phone files and flash to enable usb debugging? Anyway to remap the buttons to 2 button vs 3 button?
Everyone post your methods for entering recovery please?
Hello,
I've just installed this ROM after wiping Cache/Delvik Cache and system wipe.
Now the phone is stuck on the boot screen and I can not get back into recovery to sort it out.
I held down power & vol+ buttons to get into recovery but nothing happens. The Home & Back buttons flash after 3 seconds then nothing happens.
Any thing else I should do to get into recovery ( TWRP)
My friend whop is a member asked this question on the Developers forum and so far no luck.
we have tried the following:
This is suggested by chogardjr: Plug your phone in to charge. Don't use a USB port for power. After you plug it in try the hard reboot again.
PLEASE HELP
Just for the sake of testing... Have him hold power without holding the volume. It should force reboot, not to the bootloader, so he can get a feel for how the reboot works. It can be finicky during a bootloop cause there are processes trying to run in the background. But it should do it if you hold power long enough.
Edit:
Also find out if the charge light comes on when he plus it in.
Tried and no joy.......
rking786 said:
Hello,
I've just installed this ROM after wiping Cache/Delvik Cache and system wipe.
Now the phone is stuck on the boot screen and I can not get back into recovery to sort it out.
I held down power & vol+ buttons to get into recovery but nothing happens. The Home & Back buttons flash after 3 seconds then nothing happens.
Any thing else I should do to get into recovery ( TWRP)
My friend whop is a member asked this question on the Developers forum and so far no luck.
we have tried the following:
This is suggested by chogardjr: Plug your phone in to charge. Don't use a USB port for power. After you plug it in try the hard reboot again.
PLEASE HELP
Just for the sake of testing... Have him hold power without holding the volume. It should force reboot, not to the bootloader, so he can get a feel for how the reboot works. It can be finicky during a bootloop cause there are processes trying to run in the background. But it should do it if you hold power long enough.
Edit:
Also find out if the charge light comes on when he plus it in.
Tried and no joy.......
Click to expand...
Click to collapse
I had a similar problem with a bad kernel flash and could not get the device to shut all the way off - thats why the keys are blinking. I plugged it in to a charger, left it like that for a few seconds, then unplugged, held it under a bright light and waited. After a few more seconds, it shut all the way down and I was able to boot to recovery in the usual way (power+down). You may have to try combinations or maybe not. But, you won't get to recovery until the phone shuts all the way down. High light under in the 'eyes', plugging and unplugging, and holding the power button for up to 30 seconds are all known ways to do this, but as was said before a bootloop has processes trying to run, so the machine can be 'confused' and have difficulty shutting down. Hope you are successful...
Thanks. I actually got it going with one of the answers posted for me, by powering it off under a bright light.
Sounds daft, but it works.
So I decided to try installing a custom rom and everything today after a long haitus and I unlocked it just fine. Then I followed qbking77 on youtube's video and it all was going fine, only problem is that I accidentally used the 2.5 twrp file instead of the new 2.6.3 and now my screen is unresponsive and when I hold the power button to shut it off i just get the back and home button to start flashing. And obviously with it being solid body I can't remove the battery to get it back into bootloader mode.... need help please
Put the phone under a strong light and longpress power and vol- for 15 sec.
Your phone will reboot in bootloader.
figured it out somewhere else. just hold the power and volume down for a long time and hold it in front of a bright light, something about the proximity sensor
Hi
i have this motorola razr i xt890.
it freezes on me and i tried to reset it by pressing vol- + power button.
But now it just stuck on black screen and only green led comes on the top left.
as shown in pic attached.
Any body can HELP?
mobishack said:
Hi
i have this motorola razr i xt890.
it freezes on me and i tried to reset it by pressing vol- + power button.
But now it just stuck on black screen and only green led comes on the top left.
as shown in pic attached.
Any body can HELP?
Click to expand...
Click to collapse
Hold volume - / volume + / Power-button (all 3 buttons) simultaneously for about 10 sec. Let it reboot.
No luck tried this
Hazou said:
Hold volume - / volume + / Power-button (all 3 buttons) simultaneously for about 10 sec. Let it reboot.
Click to expand...
Click to collapse
Tried this already no luck, if i hold power button for few secs, the green light goes off but still phone don't turn on at all.
mobishack said:
Tried this already no luck, if i hold power button for few secs, the green light goes off but still phone don't turn on at all.
Click to expand...
Click to collapse
What if u try it again. Hold all 4 buttons, while the phone is connected to power for 10sec. After that release the power and volume up button. So u hold volume down all the time. See what happens.
Hello there, sorry for this resurrection but I have the same problem, black screen, green led on, but nothing more, no fastboot, no recovery, no logos, no vibration, nothing.
Is there any solution for this? I've tried power button + volumen down in many ways and nothing seems to work.
Thanks in advance!
aquilesboy said:
Hello there, sorry for this resurrection but I have the same problem, black screen, green led on, but nothing more, no fastboot, no recovery, no logos, no vibration, nothing.
Is there any solution for this? I've tried power button + volumen down in many ways and nothing seems to work.
Thanks in advance!
Click to expand...
Click to collapse
You can only try to flash ifwi and dnx as I did but I also had no success and also Moto themselves couldn't fix the phone.
If your phone is still in warranty it will get replaced, otherwise you can throw it away.
i had this problem when my battery was deeply unloaded. i had to load it with an powersource with 1A and a factory cable. that worked for me...
Help ,, please emergency !!!!
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. Please help.
I have an xperia z with unlocked bootloader and recently flashed a customised 5.1.1 rom, observing that the phone was overheating abnormally (60°c with only a few apps running) I thought a wipe and reset would help me, so got into recovery (twrp) wiped data and cache without touching internal.
Once done I dint see it telling me that SuperSU is missing and accidentally skipped it (I already have root) . The phone started rebooting and went blank. I think the only option is to flash stock again but I wanted a clarification on the use of buttons..
Vol+ + power restarts it again to the blank screen.
Vol- + power or vol+ + power to start the phone again lands me to blank screen after logo
Now to turn it off again Im holding all the three buttons, it vibrates once and reboots if I leave , if I still hold it after one vibration, it now vibrates three times and turns off.
Can anyone explain what exactly are these vibes in the last point , is it kind of a reset , can it help me any way in the future? (I'm still a noob, I just follow the instructions and have used a lots of roms on lots of phones)
I'm soooo sorry for making it a long story, its my first question..
Welcome
Because XZ doesn't have removable battery buttons combination is kinda way of pulling battery out. You only hold power button and volume up together, first vibration is rebooting device, and if you hold little more until you feel 3 vibrations it's power off, as you find out your self.
All the Best.
Sent from my D2303 using Tapatalk
Oh thank you
So I don't have to be further trying to mess with the buttons and just flash a fresh rom. Thanks