Hey guys,
So I am using GoodLock Routines and I have this routine that sets AOD to 'always show' mode as long as I am charging my phone and I have it set to 'tap to show' while I am not charging the phone. This used to work perfectly before the OneUI 2.5 update. Now when I plug the phone to charge it and the screen is off and locked the AOD shows up for 1 second but then disappears. Can anyone else try this to confirm if it's an issue with the update or it's just me? I also tried to sideload Bixby Routines but it does exactly the same there as well.
If anyone knows a way to show my lockscreen for 1 second when I plug in my phone to charge that could also be a fix as the bug only happens when I plug my phone to charge with the screen off. If I plug it with the screen on and then lock it the AOD remains on as it should.
PS: I am not rooted and won't root so need a non-root method for the screen wake-up part. I tried Tasker with SecureSettings but it's a hit or miss, 1 time it works, then it doesn't.
Related
Hi,
Thread title says it all. Everytime we plug in charger, the screen wakes on. And after the time-out, it goes to sleep.
I want to avoid the wake up.
Reason,
Simple, i dont use any lock screen, and prefer it that way. So whenever i plug in, the screen is on and prone to accidental touches. Even if nothing touched, it irritates the hell out of me.
Required:
Any xposed module,
Any link to any related thread
Any method or mod, even if it requires decompiling anything.
What i have found is, disable screen on when charger unplugged, however i want to disable it when plugged in as well.
Thanks for all answers in advance.
After Update to Lollipop i have a strange behavior with the Daydream Feature.
When i plug in my device (in StandBy) to the Docking Station, Phone Screen goes on and Lockscreen show very short before Daydream is starting, then Daydream disappears and device is unlocked and in Homescreen with Screen normaly on. After the timeout (30 sec.) Daydream comes up again and stays.
I hope the description is ok
Under Kitkat the Daydream was starting normal, without going to homescreen again.
Anybody knows what the problem could be?
hi, ive same problem with Z1, have you find a solution since april ?
No. Nothing until now
Hello I found the why, you do not plug the phone while sreen is of
When you want plug (dock or just cable) and see daydream you must push on button once again.
Daydream work only while screen is on
It is not a good dev idea but it work like that
By
I have been searching looking for way to make this work with no solution.
I have disabled AOD since it is consuming battery heavily and wanted notifications to behave as on stock android where they turn screen on. My note 8 is receiving notifications and LED turns on, but screen doesn't. I have to manually turn it on to be able to see the lockscreen notification.
Is there any way to make this work?
+1
Facing same issue.
Having the same problem. Aod does not work anymore.
ralphoberholzer said:
I have been searching looking for way to make this work with no solution.
I have disabled AOD since it is consuming battery heavily and wanted notifications to behave as on stock android where they turn screen on. My note 8 is receiving notifications and LED turns on, but screen doesn't. I have to manually turn it on to be able to see the lockscreen notification.
Is there any way to make this work?
Click to expand...
Click to collapse
I use "Dynamic Notifications". It lights up notifications when screen is locked. There's a certain amount of customisation, including screen on time. Used it on many of my phones including Note 8.
Wait.. You want the screen to turn on for every notification?
I hate that... Some apps even ignore the settings either way.
meboy said:
Wait.. You want the screen to turn on for every notification?
I hate that... Some apps even ignore the settings either way.
Click to expand...
Click to collapse
Same here, that would drive me nuts if the screen turned on for every notification. It's bad enough the screen turns on everytime the phone is plugged in/unplugged from USB or from a wireless charger.
Shouren, you can try snoozy charger app to manage the plug/unplug screen on issue
winol said:
Shouren, you can try snoozy charger app to manage the plug/unplug screen on issue
Click to expand...
Click to collapse
Thanks. The rom I'm using is actually supposed to have that disabled but I don't think it works for wireless charging, only cable. I never never charge with the cable anymore. But whatever, I prefer not to install apps just to disable one minor thing.
I understand you, I also prefer wireless, but, it works with wireless too
There must be a build prop tweak or something but I can't seem to find one right now.
Maybe a PM to a nice dev and they could tell you where to look. Report for community if you figure it out
Hi guys,
I remember on my note 9 with good lock there was a way to enable AOD to turn itself on only when charging. I can't seem to find it now. Any ideas?
Thanks
You can now do this in Bixby Routines. Go to "my routines" then click the plus to create a new one. Set IF to "charging status: charging" and THEN to "Always on display: Show always".
You can also name the routine and select if you want a notification when its active.
Now when your device is charging the AOD will stay on, the setting will revert back to its original state when the routine stops (so when you stop charging).
You can automate a lot of nice things with Bixby routines, like having your phone unlocked when you're home (works a lot more reliably than Google smart lock). Or to enable Do Not Disturb when you're sleeping (auto detected)
nukeclears said:
You can now do this in Bixby Routines. Go to "my routines" then click the plus to create a new one. Set IF to "charging status: charging" and THEN to "Always on display: Show always".
You can also name the routine and select if you want a notification when its active.
Now when your device is charging the AOD will stay on, the setting will revert back to its original state when the routine stops (so when you stop charging).
You can automate a lot of nice things with Bixby routines, like having your phone unlocked when you're home (works a lot more reliably than Google smart lock). Or to enable Do Not Disturb when you're sleeping (auto detected)
Click to expand...
Click to collapse
Oh nice that is cool! Thank you for the tips!
I've set up tasker to launch the app "flitsmeiser" and lieve my screen on all the time when I'm connected to my car Bluetooth.
I don't know why, but tasker won't unlock my phone when the connection is made
What I'm doing wrong?
Try to disable or remove the 'Auto dismiss keyguard'. I think you don't need this command because your screen won't lock anyway because you set the display timeout to almost 24 hours.
I assume you have an exit task to go back to the normal display timeout when you disconnect your bluetooth.
That's not what I want
XTrail02 said:
Try to disable or remove the 'Auto dismiss keyguard'. I think you don't need this command because your screen won't lock anyway because you set the display timeout to almost 24 hours.
I assume you have an exit task to go back to the normal display timeout when you disconnect your bluetooth.
Click to expand...
Click to collapse
Thank you for your answer, but that's not the case. My phone is locked at this time, and I want to unlock it and run this task
If I understand you correctly, you want Tasker to automatically unlock your phone and keep it unlocked as long as you are connected to the car bluetooth.
If that is the case, I recommend an Xposed module, Lockscreen Disabler 2. But you have to be rooted and with EdXposed framework to install this. Also only works up to Android 9, based on my experience with it. Tasker will turn on or off this Lockscreen Disabler via Tasker plugin.
Hope this helps.