rgbc-ir not working on 58.1.A.1.178 - Sony Xperia 1 II Questions & Answers

Hello everyone
After update to 58.1.A.1.178
I found the RGBC-IR values all show 0 in manual mode
But the photo taken after update to new version seems normal
Also I noticed that the image showed on 3D itof is a little bit different than usual
The background is darker
But I think the main problem is the issue about RGBC-IR sensor
I'm wondering if this is a S/W bug or not
Hope that official can notice this problem and release containment in the near future

I also have the same problem with the RGBC-IR sensor....

Related

Camera not working

Hi
I've recently load the latest hot fix from HTC website:
Hot fix for TyTN II photo quality issue
If you zoom in on a captured photo and notice grainy, maze-like patterns within the image itself (this problem is caused by too much sharpness enhancement being applied in bright-light environments), please download and install this hot fix to solve the problem. Sharpness parameters within the photo will then be reduced with only a minimal loss of image sharpness.
Now my camera does not work at all, all is see is black. Even if I change to the video call camera its also black.
Is there a setting to enable the camera or is the camera broken? What now?
Me too. Since I applied the update, I cant see anything, but can still take pictures and review/look at them afterwards. Very strange. Hope there's a fix that doesn't involve hard-reset. Uninstalling doesn't want to work either.
You guys might have to change the radio, look into that
Just wanted to say that this hotfix doesn't work with WM6.1.
So if you upgraded your device to WM6.1 you don't need the "Hot fix for TyTN II photo quality issue"
Greets...
had this happen right before flashing a new ROM. Reflashing a ROM fixes that.. assuming you have a correct radio installed, of course.
Try that : http://forum.xda-developers.com/showpost.php?p=2253873&postcount=371
It should fix it

Software or Hardware issue?

I bought a second hand camera a few days ago "ek gc 100" after about 4 days the camera began to act strange with color distortion in auto mode and white balance not working correctly in manual mode "did update", before update the colors show better and auto white balance works better but crashes alot apart from the update the macro mode won't work correctly even in manual mode as it won't focus on close objects 2x times the length of when I got the camera to take the same photo but it had worked correctly to begin with but with a problem of color distortion in the auto mode.
I'm not sure whether this is a hardware issue or a software issue as factory resetting gives one set of issues and updating the camera gives a new set of issues.
could the OS have become corrupt or be a software / lens issue?

Camera Problem

Hi,
I have a OnePlus 3T which has a bit of a focus problem, sometimes the focus just works as it should, but mostly it focusses and then glitches around that focus point. But not as normal with a smooth movement, instead it just jumps to a different focus point. Anybody had this problem yet.
Sometimes it seems as if it is just stuck at one focus point.
Any tips?
I might reset it today to exclude a software problem, the latest update said camera improvement, but I honestly don't know if the problem was also present before that update.
Is there a way to go back to the old software version I haven't installed TWRP yet

Portrait mode can only focus on the middle of the frame

Hi guys, according to my old thread; https://forum.xda-developers.com/mi-a2/help/lots-issues-updated-to-android-9-pie-mi-t3881173
Since I updated my A2 to Android 9.0 Pie, I found that its portrait mode seems close to be useless.
It only focuses on the subject which is located on the middle of the frame, I cannot tap anywhere else in the frame to focus. In addition, locking focus doesn't help at all.
This issue has been appearing since the first Pie update, and is not fixed til now. I send my feedback to Mi every single update patch, but seems all my feedbacks are completely useless.
Any other modes work fine, both camera performs perfectly. There's only the mentioned issue in portrait mode.
Please note that I already tried factory reset, but it doesn't help fix the issue. Moreover, I found that many users also face this issue, so I am extremely sure that there's not only me.
Since the issue has never been fixed, so I wonder if you guys have any good suggestions to fix the issue, or any ideas how to force Mi to fix this big bug for us?

Brightness dependent yellow tint and black lines on the screen

I am facing this issue in my Note 9,
While I am on lower brightness , I am not getting this issue. While increasing the brightness getting these black lines and also some sort of color discoloration with yellow tint also , Could someone help on this?
While on maximum brightness there is no lines are visible. Could someone help on this?
This is what android 10 does to the dispaly setting.downgrade to pie using odin to fix the screen. Back to normal,Basically in android 10 they changed the warmthness of the screen .I'm assuming you are using adaptive display and have the slider set to warm.on pie your screen would look everso slightly pink on warm but on the android 10 the screen looks yellow /brown at warm position on the slider,I made a thread complaining and ended up odining back,They have made it identical to the note 10 in terms of screen colour calibration. It sucks imo as for the black lines you mention I have no idea what that is
Please help me
Please help me
Have you factory reset ??
Next step would be to return under warranty .
Ive allready helped you just odin back to pie it fixes the issue
Happened to me as well. Display discolored showing grainy lines after recent update
I am on Latest build of Samsung Note 9 - India, with March security update on board.
I noticed that my screen shows grain whenever the brightness auto adapts to lower levels, it doesn't get normal until I keep it locked for some time and then unlock.
My phone is 1year and 3 months old however it has no issues in maintenance - no cracks, no falls, no display injuries.
I tried to keep the auto brighntess (adaptive) to off and yet this is happening occassionally when watching videos or pictures or simply pulling down the notification bar.
I also Factory reset it today and I found it is happening right from start - during the setup screens.
I am pretty disappointed something like an update is pushed and that breaks the quality of a device!
It's livable but very annoying when you are showing a picture to someone and suddenly you see the screen becomes discolored and there are grainy black lines all over the display.
I have only one hope if there is a way to go back to Feb or January build of android 10. Anyone else facing this? Please help me.
Have you sorted this issue @aronhq??
Is this a software or hardware issue. I also have this issue and i have been using android 10 from feb and got the issue today only though recently secutity updated 2 days back
aronhq said:
I am facing this issue in my Note 9,
While I am on lower brightness , I am not getting this issue. While increasing the brightness getting these black lines and also some sort of color discoloration with yellow tint also , Could someone help on this?
While on maximum brightness there is no lines are visible. Could someone help on this?
Click to expand...
Click to collapse
I have the same problem at the beginning it was when the phone was warm now the screen is yellow and when I lower the brightness I have lines coming out
Temp fix
As a temp fix i am using oled saver app from playstore and keeping it on serting brightness full and adjusting the brightness with oled status bar so try it
My issue got solved on its own the same day..But now the issue is while watching video, it gets blocked images and slight color artifact when dark scenes play.I don't know whether its due to video compression and i didn't notice such issue previously.
Did you guys try the newest update that just came out this week?
sethsmaxx said:
Did you guys try the newest update that just came out this week?
Click to expand...
Click to collapse
Could you screenshot your latest update? Thanks.
N960U1 usa unlocked firmware is N960U1UEU4DTC7
https://doc.samsungmobile.com/SM-N960U1/VZW/doc.html
Screen replacement
Insurance screen replacement for $30 fixed any yellowing.
sethsmaxx said:
N960U1 usa unlocked firmware is N960U1UEU4DTC7
https://doc.samsungmobile.com/SM-N960U1/VZW/doc.html
Click to expand...
Click to collapse
oh, its April patch update. thought there is May update already. thanks.
Are you saying you are on 4DTC7 and having issues with screen still or what is your firmware version?
sethsmaxx said:
Are you saying you are on 4DTC7 and having issues with screen still or what is your firmware version?
Click to expand...
Click to collapse
no, i was just saying that i thought there were May update since you said your had it a week ago, which is still an April update.
Still issue N960FXXS5DTB6
sethsmaxx said:
Are you saying you are on 4DTC7 and having issues with screen still or what is your firmware version?
Click to expand...
Click to collapse
I am on above firmware indianmodel but still issue is there but with oled saver some what better with minimal lines
any trouble using apps like uber and waze? white UI apps make my screen gets darker and darker.... :fingers-crossed:
Hi, any update for possible solution?
I just got the exact same issue. But my phone is Note8.
I was just watching youtube video then open an app then suddenly my screen turn yellowish and black turned faded. Also got horizontal lines if brightness is set to around 20%-70%. This happens right from boot up of the phone where Samsung logo appears.
Also I noticed that my phone gets warmer.
Mine still not back to normal.
Any update for a possible solution?
Thank you

Categories

Resources