Related
I have two windows 7 pcs that both recognized my replacement I897UCKB2 phone that I got a little over a week ago. I installed Kies on one of them to upgrade my wife's Cappy to UCKB1. I connected my phone and saw an error that it wasn't recognized. I have uninstalled KIES, the drivers, rebooted, cleaned out Samsung registry entries, rebooted (many times), tried different ports (including on the back), etc - no dice. I tried the other pc which hasn't had any changes and that doesn't recognize it either.
I know the cable is good because my wife's UCKB2 (was replaced as well) is seen no problem using the same cable and computer.
I have tried with my phone in debug and not - mass storage, KIES, ask on connection - etc. I did previously root the phone with SuperOneClick on this build. I was about to flash a custom ROM tonight after waiting a bit but now I can't get any computer to see it although the phone does start charging. I haven't yet tried linux and heimdall but that is about the only thing I can think of at this point.
I started wondering if Kies somehow caused a problem on the phone - maybe because it was rooted? I tried restoring CWM since I have Titanium backup working and busybox, etc. In CWM I tried "reboot into recovery" and then I see the original 3e recovery. I tried "reinstall packages" and it fails the signature verification. I have flashed ROMs many times in the past and have never been "stuck" like this... Any ideas?
I would try flashing the original stock eclair, there is an odin one click around that will do it... "I897UCJF6-final-OCD-REV0.exe". Then try kies mini.
crt60 said:
I would try flashing the original stock eclair, there is an odin one click around that will do it... "I897UCJF6-final-OCD-REV0.exe". Then try kies mini.
Click to expand...
Click to collapse
Thanks but that is the ODIN I have always used in the past. It doesn't even see the phone when I connect it though. The phone will start charging but windows doesn't recognize that I connected it.
RichMD said:
Thanks but that is the ODIN I have always used in the past. It doesn't even see the phone when I connect it though. The phone will start charging but windows doesn't recognize that I connected it.
Click to expand...
Click to collapse
I had a friend who had that problem. When he plugged his phone into his computer, the phone would start charging but Windows wouldn't even play a notification sound to show the phone was plugged in. He couldn't access USB storage mode or anything. He called Samsung and was told his phone would need to be reflashed. His three button combo didn't work, so we bought a jig on eBay. We could get the phone into download mode that way...but Windows still/I] wouldn't recognize it. He called Samsung again and they replaced it under warranty, without any hassle.
Well, are you sure that you have your usb drivers installed correctly? Have you tried seeing if adb is recognizing the phone? Also, make sure that it is plugged in on all sides on the phone end of the the USB (sometimes the phone charges when it is plugged but unless you plug it in all the way, the computer won't recognize it)
try those...
pwneman said:
Well, are you sure that you have your usb drivers installed correctly? Have you tried seeing if adb is recognizing the phone? Also, make sure that it is plugged in on all sides on the phone end of the the USB (sometimes the phone charges when it is plugged but unless you plug it in all the way, the computer won't recognize it)
try those...
Click to expand...
Click to collapse
Thanks for the replies. I know the USB drivers are good because I can easily mount USB storage on my wife's captivate - same exact I897UCKB2 build with the same cable. Additionally, a second pc won't see my phone even though it did before. I have tried at least 6 different ports numerous times. I am thinking I need a replacement.
My question now is that it is rooted with busybox, etc and I can't use an unroot program from a PC. Will a factory reset under settings (not CWM) erase all traces of root?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it
i have windows 7 and a samsung captivaye flashed with heimdall 2.3.4 gingerbread. i want to flash 2.3.5 with clockwork mod and can only find one that comes with a odin one click. my problem is the comuter recognizes the phone heimdall does too but no version of odin will. any ideas on how to get odin to see my phone. and yes im in download mode
my computer is running windows 7 and i have a samsung captivate. my computer recognizes my phone, hemdall recognizes my phone but no version of Odin will. i am running 2.3.4 gingerbread flashed with heimdall but i want to flash it with 2.3.5 with clockwork mod which the only version i could find came in a odin one click package. any ideas on how to get odin to recognize my phone???
and yes i ran odin as admin still no go
Reinstall your drivers. After installing the Heimdall driver, your driver that you need for Odin is borked.
i have reinstalled the phone drivers many times. i eaven downloaded them from samsung and tried that that. when i plug my phone in the computer will say installing drivers then it says completed. i restarted computer right click odin run as admin but nothing shows up in the com box..
Look here
http://forum.xda-developers.com/showthread.php?t=1351224
For more help
can i unplug the phones usb cable from the pc while it is in download mode? i do not want to brick the phone
also is there a way to get out of download mode with out flashing the rom
got it. i let kies mini install drivers for phone then once kies mini found the phone so to did odin
oh and just help someone else who may be having these issues. yes you can unplug the phone as long as its not already flashing a rom. never unplug if already in the middle of flashing or you will brick the phone. to get out of download mode if you are not in the middle of a flash. if you find yourself like me and have put the phone in download mode and odin or whatever you are using will not recognize it or maybe you forgot to check usb debugging then unplug phone from computer remove battery for a few seconds and the phone should boot normally. tahnks guys for all the help i really appreciate it
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
rekamyenom said:
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
Click to expand...
Click to collapse
Are you using the cable that came with the phone?
Have you tried a different cable?
Do you have Debugging Mode turned on?
You might want to post in the S4 Active Q&A forum.: http://forum.xda-developers.com/galaxy-s4-active/help
dawgdoc said:
Are you using the cable that came with the phone?
Have you tried a different cable?
Do you have Debugging Mode turned on?
You might want to post in the S4 Active Q&A forum.: http://forum.xda-developers.com/galaxy-s4-active/help
Click to expand...
Click to collapse
Yes & yes
rekamyenom said:
Yes & yes
Click to expand...
Click to collapse
If you connect your phone to the PC and then go to the computer's Device Manager, is it recognizing the phone correctly? Or are you getting the yellow exclamation point over the icon?
I use Heimdall when doing Odin tasks. It is an Open Source equivalent to Odin available for Windows, Mac, and Linux. I'm not too familiar with Windows problems because I have been on Linux for the past 7 years. I have only used Windows in those years for updates to a Captivate that only worked through Kies, and rooting an Acer tablet with a Windows only tool.
dawgdoc said:
If you connect your phone to the PC and then go to the computer's Device Manager, is it recognizing the phone correctly? Or are you getting the yellow exclamation point over the icon?
I use Heimdall when doing Odin tasks. It is an Open Source equivalent to Odin available for Windows, Mac, and Linux. I'm not too familiar with Windows problems because I have been on Linux for the past 7 years. I have only used Windows in those years for updates to a Captivate that only worked through Kies, and rooting an Acer tablet with a Windows only tool.
Click to expand...
Click to collapse
I get nothing when I connect the phone to the PC in download mode, but I get full communication when not in download mode. I have never tried Hemidall
I have seen some suggestions to try a different USB port, I expect you already have.
Other thoughts:
What version of Odin are you using?
Have you tried Kies?
Is your phone stock or modified?
dawgdoc said:
I have seen some suggestions to try a different USB port, I expect you already have.
Other thoughts:
What version of Odin are you using?
Have you tried Kies?
Is your phone stock or modified?
Click to expand...
Click to collapse
I have tried numerous computers, numerous cables, numerous USB ports, I have tried every version of Odin known to mankind, I have tried with kies, without kies, and my phone is completely stock, not modified whatsoever, this one has me stumped. I have used odin on no less than 1000 phones never have I had a phone not react to Odin. the phone reacts 100% of the time to anything but Odin, I am wondering if Samsung has released a security update that is preventing communication with Odin
rekamyenom said:
I have tried numerous computers, numerous cables, numerous USB ports, I have tried every version of Odin known to mankind, I have tried with kies, without kies, and my phone is completely stock, not modified whatsoever, this one has me stumped. I have used odin on no less than 1000 phones never have I had a phone not react to Odin. the phone reacts 100% of the time to anything but Odin, I am wondering if Samsung has released a security update that is preventing communication with Odin
Click to expand...
Click to collapse
I'm at a loss, a quick search using the terms odin, download, and something else did not yield useful results. Raising your question over there may turnup someone who has experienced this, and hopefully resolved the issue.
dawgdoc said:
I'm at a loss, a quick search using the terms odin, download, and something else did not yield useful results. Raising your question over there may turnup someone who has experienced this, and hopefully resolved the issue.
Click to expand...
Click to collapse
UPDATE:
After trying 3 different computers (windows XP & windows 7 64 & 32 bit, with Kies installed and without Kies installed), 12 different USB Ports, and 10 different cables at my house to NO AVAIL, just for a goof went to a friends house to try his computer (Windows 7 64 bit with Kies 2.6 & 3 installed), put the phone in download mode, connected it to his computer, with a random cable, opened Odin, and BOOM it showed up right away. I DON'T GET IT !!! WTF !! I have used Odin on no less than 1000 phones on my home PC with NO Problems, I try to hook this phone up to 3 different computers at my house (2 laptops and a PC), and Odin WOULD NOT see this phone. I am Stumped!
Glad you got it to work. I hope you were able to accomplish what you needed while you were at your friends.
dawgdoc said:
Glad you got it to work. I hope you were able to accomplish what you needed while you were at your friends.
Click to expand...
Click to collapse
Yes, I was able to Root the device with Towelroot after reverting from 4.4.2 Build NH3 to 4.4.2 Build NE3, Now I just have to get this thing home to "Fix" the IMEI number. One must be rooted before being able to "Fix" the IMEI number. I wish Samsung would just cut the **** with these unnecessary updates.....
This is one for the books. Must have just been a finicky phone..... Didn't like my computers, cables, or something.
Hello, my Samsung Galaxy S GT-i9003 was working fine yesterday, but now it stays stuck on the samsung logo when booting. I'm trying to flash it, the thing is, I can't get my computer to detect my phone, it shows up as an unkown device. I tried a factory reboot etc.. didn't work, and I can't even use it as a mass storage device since it's bricked. I used all the newest drivers, the newest version of kies but it still doesn't work.
I'm on windows 7/64 bit btw.
Thank you in advance.
Are you able to enter into download mode? (hold volume down + home + power)
If not, You can try to make (or buy) a JIG which will force download mode and you can flash a new ROM with Odin
Regards
I can enter in download mode, the thing is, my computer detects my phone as an "unknown device" and it isn't recognised by Odin either, which means I can't flash it.
are you sure the drivers are installed correctly? I recently had problems with the USB cable.. try another one and if possible, other PC....
I installed many times the drivers, using kies or without kies, the result is just the same, maybe it's the cable.
Try to change the cable and the USB port. Last week I tried to update a Motorola Atrix and the same thing happened, unknown device. Then I changed the USB Cable and voila... worked !
Let me know if it works....
Regards
just wondering if you have resolved this yet ? I have same problem tried all usb drivers i can find , 5 different computers , jig , odin still not detect and windows show unknown device detected.
Sent from my Dell Streak using XDA
Guys I had the same problem. After trying many pc, drivers, cables combinations I came to a conclusion that the usb port on the phone itself must be damaged. After taking a close look, I saw some of the gold contacts damaged/missing.. That might be the case with your phone aswell. Look at the pins and if yo usee some visual damage you know what the problem is. Even if you dont see it, it still might be a problem.
I just got my Note 4 from Tmobile and trying to root it. However, Odin is not recognizing the phone when it is in download mode.
I have tried using different USB cables, one was the stock cable that the phone came with. Tired different ports on two different windows computers. Installed Kies and reloaded the USB drivers. Downloaded the drivers from multiple places. Tired removing the battery while the cable was plugged in. No luck with Odin recognizing the phone in download mode.
I do have developer mode turned on, and USB debugging. The phone is recognized when it's running like normal as a camera or mass storage device.
I'm at a loss of why it's not working. I have had no trouble with an S4, S5, and Note 3.
Does anyone have any idea or can link me to a solution?
Thank you.
dertanion said:
I just got my Note 4 from Tmobile and trying to root it. However, Odin is not recognizing the phone when it is in download mode.
I have tried using different USB cables, one was the stock cable that the phone came with. Tired different ports on two different windows computers. Installed Kies and reloaded the USB drivers. Downloaded the drivers from multiple places. Tired removing the battery while the cable was plugged in. No luck with Odin recognizing the phone in download mode.
I do have developer mode turned on, and USB debugging. The phone is recognized when it's running like normal as a camera or mass storage device.
I'm at a loss of why it's not working. I have had no trouble with an S4, S5, and Note 3.
Does anyone have any idea or can link me to a solution?
Thank you.
Click to expand...
Click to collapse
What method are you using to root? Tekhd has a nice one with all the downloads linked and try restarting PC.
BAD ASS NOTE 4 & GEAR S
I had some trouble with mine. I found that making sure the phone is NOT plugged in until it is already in DL mode is what worked. Gaining root was a first try operation. It took a dozen tries to install TWRP until I figured out what I was doing wrong. Now I can repeat it regularly.
Cliffs:
Put phone into download mode BEFORE plugging in the USB
I'd try a different version of Odin. I use 3.0.4 every day.
If that doesn't work then I'd try a friend's computer.
I'd try a different version of Odin.