Database Develop

[q]s-pen= awful

Does anybody else find the S.pen of the SGN really bad??.. when it comes to drawing some stuff..? Any remedy for that?
Sent from my GT-N7000 using XDA App

i don't draw but i do annotate quite a lot, and it feels like the calibration is a bit off. what in particular about it is your concern?

Like, the place where i point the pen and the place where it writes is not the same,the location where it writes is a little bit to the upper left( not precise)... and its also has a latency after writing...
Its not a very big problem for me just a little critic...
Sent from my GT-N7000 using XDA App

crz2uf said:
Does anybody else find the S.pen of the SGN really bad??.. when it comes to drawing some stuff..? Any remedy for that?
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
I've used five s-pens so far, and two of them were significantly worse than the other three. Good news is that the problem is most likely with the pen itself and not with the Note!
Try getting a different pen (e.g. there is an official Samsung holder that comes with another pen). For the offset problem, try to switch from right to left to right... several times --- sometimes that helps to make the offset more reasonable. Also experiment with the angle of the Note as you write, often that makes a difference too.
Just my two cents...

The reason why it seems a bit of is done on purpose.
You notice this when you change your writing hand in the settings.
When it's set to your right hand, the drawing is slightly left of your pen. With the left hand it's the other way around.
This is done so you can see what you are drawing/writing and your hand is not in the way.
I know it sucks, but Samsung made it this way.

jellevanb said:
The reason why it seems a bit of is done on purpose.
You notice this when you change your writing hand in the settings.
When it's set to your right hand, the drawing is slightly left of your pen. With the left hand it's the other way around.
This is done so you can see what you are drawing/writing and your hand is not in the way.
...
Click to expand...
Click to collapse
This is true, but some pens have larger offset than the others. I think some of them have sensitive elements inside aligned better. And actually this works rather nicely if the offset is reasonable, at least for me. Takes a bit of practice, but feels quite natural after a while... if you think about it, some offset is appropriate, since there are three surfaces at different depths: the writing surface, the "displaying" surface, and the actual surface which is sensitive to the pen's movements (this one is quite deep, it's behind the screen, not in front of it)...
Try different pens before giving up

Yeah the calibration is not exact to the point. When I'm writing words normally I'm not really affected, only when it comes to drawing in slow motions, the placement is off and it's frustrating for drawing little details.
However, I managed to dig out an old stylus which came with my ancient fujitsu tablet PC and it's calibrated perfectly.

I've noticed that the angle to which I hold the s-pen to the surface makes a difference in percieved accuracy.

This app has worked for me:
https://market.android.com/details?...1bGwsMSwxLDEwMiwiY29tLnZpdGFsLnRzdC5uNzAwMCJd

robot1000 said:
This app has worked for me:
https://market.android.com/details?...1bGwsMSwxLDEwMiwiY29tLnZpdGFsLnRzdC5uNzAwMCJd
Click to expand...
Click to collapse
... Just note that it requires root
It will run without root, kinda, but you'll be getting something like this on the unlock:
"ERROR: IOException! No ROOT permissions?"

iamastone said:
However, I managed to dig out an old stylus which came with my ancient fujitsu tablet PC and it's calibrated perfectly.
Click to expand...
Click to collapse
With the Fujitsu pen, does it have calibration issues or extra lines if you write on it upside down, like if you were lying on your back? My biggest pet peeve with this phone is that I can only use the pen if I'm sitting upright and holding the pen just so, otherwise calibration is way off and a lot of unintended lines appear.
beestee said:
I've noticed that the angle to which I hold the s-pen to the surface makes a difference in percieved accuracy.
Click to expand...
Click to collapse
I've noticed this too. It's most apparent to me when I set my phone on a table, holding the pen by it's very end. Touching the screen with the point and changing the angle of the pen relative to the screen--without moving the tip of the pen;s position at all--you can see the cursor move with the angle of the pen, even though the tip stays in one place.
The best way to fix this, in my mind, is for Wacom to do on this phone what they do for a lot of their tablets--have a little dot show up on the screen when you hover your pen, so you know where you'll be drawing.

thriceberg said:
With the Fujitsu pen, does it have calibration issues or extra lines if you write on it upside down, like if you were lying on your back? My biggest pet peeve with this phone is that I can only use the pen if I'm sitting upright and holding the pen just so, otherwise calibration is way off and a lot of unintended lines appear.
I've noticed this too. It's most apparent to me when I set my phone on a table, holding the pen by it's very end. Touching the screen with the point and changing the angle of the pen relative to the screen--without moving the tip of the pen;s position at all--you can see the cursor move with the angle of the pen, even though the tip stays in one place.
The best way to fix this, in my mind, is for Wacom to do on this phone what they do for a lot of their tablets--have a little dot show up on the screen when you hover your pen, so you know where you'll be drawing.
Click to expand...
Click to collapse
This is a damn good idea right here. Someone should forward this to Samsung before they roll out the ICS update.

emignatius said:
This is a damn good idea right here. Someone should forward this to Samsung before they roll out the ICS update.
Click to expand...
Click to collapse
I believe this is already in ICS.
Sent from my superior GT-N7000 using Tapatalk

Well you guys said it all... drawing details,drawing slowly, lots of unwanted lines appear...etc...
I see, so its most likely caused by the pen rather than the note itself... ill give the app(touchscreentune) a try..thanks.
Sent from my GT-N7000 using XDA App

S-pen replacement and calibration

This is a two part question.
Firstly does anyone know if there is a way to calibrate the s-pen. Mine seems ever so slightly off when writing as I would with a normal pen (on a slight angle).
I also have the bamboo feel but that is even worse (around 2-3 mm off).
Next question is are there any other s-pen out that like the bamboo feel? I like the bigger size of it as it's more comfortable for writing with but accuracy seems to be the issue with some third part pens. I'm surprised there issue nothing from Samsung already for the note 5. I understand there are the pen holder or the bt pen but those are for older devices so I'm not sure how accurate they are or compatible.
Sent from my SM-N920I using Tapatalk

AndiF85 said:
This is a two part question.
Firstly does anyone know if there is a way to calibrate the s-pen. Mine seems ever so slightly off when writing as I would with a normal pen (on a slight angle).
I also have the bamboo feel but that is even worse (around 2-3 mm off).
Next question is are there any other s-pen out that like the bamboo feel? I like the bigger size of it as it's more comfortable for writing with but accuracy seems to be the issue with some third part pens. I'm surprised there issue nothing from Samsung already for the note 5. I understand there are the pen holder or the bt pen but those are for older devices so I'm not sure how accurate they are or compatible.
Sent from my SM-N920I using Tapatalk
Click to expand...
Click to collapse
Can you make sure that there is no cover when trying, as magnetic covers or even flip covers cause the S-pen to be inaccurate.
in older models, magnet closure cases made a huge difference.

Hello; I am not sure if anyone had such problem about note5 spen. . I can't use with spen whole screen..i mean at the middle of one side is not seen by spen although I can write that side with my finger..how can i solve this problem? Thank you anybody who responses!!

free123rww said:
Hello; I am not sure if anyone had such problem about note5 spen. . I can't use with spen whole screen..i mean at the middle of one side is not seen by spen although I can write that side with my finger..how can i solve this problem? Thank you anybody who responses!!
Click to expand...
Click to collapse
Using a case with a magnet?

There are these larger pens. never tried one myself.
http://www.ebay.com/itm/Genuine-Ori...960876?hash=item2106bcdaec:g:yi4AAOSwAYtWMwmG

free123rww said:
Hello; I am not sure if anyone had such problem about note5 spen. . I can't use with spen whole screen..i mean at the middle of one side is not seen by spen although I can write that side with my finger..how can i solve this problem? Thank you anybody who responses!!
Click to expand...
Click to collapse
Try typing in *#0*# in your dialer. This will bring up the integrated hardware test. There should be one for S-Pen (not touch) and try it on that screen. If it does not pass the test, then you are probably looking at a hardware failure/malfunction.

Broke my S pen when my phone fell. Any good sites to get a replacement?

Try spen with eraser.

mexkingsthugz said:
Broke my S pen when my phone fell. Any good sites to get a replacement?
Click to expand...
Click to collapse
Amazon is where I would go, cheaper deals else where could be sketchy.

bosswick said:
Try typing in *#0*# in your dialer. This will bring up the integrated hardware test. There should be one for S-Pen (not touch) and try it on that screen. If it does not pass the test, then you are probably looking at a hardware failure/malfunction.
Click to expand...
Click to collapse
Good information to know just in case .... one never knows when 'Ol Murphy will decide to put his most famous law into action. ... " Anything that can go wrong usually will."

I know this is an old post, but I am trying to find a gold s-pen. Samsung doesn't sell them on their site. To get mine warranties will take over a month. I have seen them on Amazon but really no where else. Wondering if anyone has tried them and any issues. Where do you recommend?

GastonC said:
I know this is an old post, but I am trying to find a gold s-pen. Samsung doesn't sell them on their site. To get mine warranties will take over a month. I have seen them on Amazon but really no where else. Wondering if anyone has tried them and any issues. Where do you recommend?
Click to expand...
Click to collapse
Did you manage to find one? Amazon is $20+, lots of cheap ones from China for $5.

Found one on Amazon that comes in Samsung packaging. WORKS LIKE ORIGINAL
Sent from my SM-N920T using Tapatalk

For what it is worth...
I have both a NOTE 3 and a NOTE 5
The 5 I only bought recently and the Stylus hole was blocked and there was some weird other stylus somehow wedged into it.
The previous owner knew he was selling me a duffer but there we go.
Anyway, I managed to get it out and I bought a new stylus for it, but the bloody thing was not quite right... It was something like about 1.5mm off down and right. I am very very good with sizes and so trust me, its more than 1mm but not quite 2mm but thats by the sideways... I just assumed that the bloody thing needs calibrating to this stylus.
Anyway, it was some time later that I thought... Why not try the note 3 and 5 styluses on each other... They both work just fine, but guess what? It was not the screen that needed calibrating at all? - the stylus is to blame.
The Note 5 stylus is wonky just the same on the Note 3 and the Note 3 Stylus is perfect on the Note 5
If only I could swap them over?
But there you go... Maybe its a new stylus or a replacement stylus you should be looking for and not a calibration of the screen?

yeah mines a few mm's off as well. its very annoying.

There is also a waycom test in the integrated hardware test menu (this would be good for seeing how your s-pen registers on the screen)
Also you may want to try another N5 s-pen (if you know someone that has one see how it does, the one you have may have a defect)

You can take off the cover on the button of the spen and there's a tuning adjuster under it. Factory is set to be off a little.

TechNyne66 said:
You can take off the cover on the button of the spen and there's a tuning adjuster under it. Factory is set to be off a little.
Click to expand...
Click to collapse
whut? seriously?
Sounds dodge to me. Got pics?

FatRakoon said:
For what it is worth...
I have both a NOTE 3 and a NOTE 5
The 5 I only bought recently and the Stylus hole was blocked and there was some weird other stylus somehow wedged into it.
The previous owner knew he was selling me a duffer but there we go.
Anyway, I managed to get it out and I bought a new stylus for it, but the bloody thing was not quite right... It was something like about 1.5mm off down and right. I am very very good with sizes and so trust me, its more than 1mm but not quite 2mm but thats by the sideways... I just assumed that the bloody thing needs calibrating to this stylus.
Anyway, it was some time later that I thought... Why not try the note 3 and 5 styluses on each other... They both work just fine, but guess what? It was not the screen that needed calibrating at all? - the stylus is to blame.
The Note 5 stylus is wonky just the same on the Note 3 and the Note 3 Stylus is perfect on the Note 5
If only I could swap them over?
But there you go... Maybe its a new stylus or a replacement stylus you should be looking for and not a calibration of the screen?
Click to expand...
Click to collapse
I tried Note 4 stylus on Note 5 and it felt like a Note 7 stylus on Note 7. Note 5 stylus is useless. in comparison.

So stupid that companies still make Note cases with friggin battery clips on them. But then again there seems to be a fair amount of people who buy these Note devices but rarely use the S-Pen which is bizarre to me.

Pen sensitivity not equal on the screen

I've noticed lastely that my pen sensitivity is different in the middle of the screen compared to the corners. I have to press down the pen harder to actually write something, while on the corners I can write normally.,
This was not always the case, the problem appeared just recently. The pen has bad sensitivity in the middle regardless if I try to write or just scroll on a webpage with it.
Restarting the phone didn't help.
I have a custom rom which I have not upgraded for months now (I'm waiting on Oreo roms).
The digitizer seems to work fine when I use my fingers.
I have uploaded a screenshot testing the pen. The corners are where I gently just swiped with the pen. As you can see there's nothing in the middle.
Could this be software (rom) issue, digitizer losing response or the pen itself? Any ideas?

Nebell said:
I've noticed lastely that my pen sensitivity is different in the middle of the screen compared to the corners. I have to press down the pen harder to actually write something, while on the corners I can write normally.,
This was not always the case, the problem appeared just recently. The pen has bad sensitivity in the middle regardless if I try to write or just scroll on a webpage with it.
Restarting the phone didn't help.
I have a custom rom which I have not upgraded for months now (I'm waiting on Oreo roms).
The digitizer seems to work fine when I use my fingers.
I have uploaded a screenshot testing the pen. The corners are where I gently just swiped with the pen. As you can see there's nothing in the middle.
Could this be software (rom) issue, digitizer losing response or the pen itself? Any ideas?
Click to expand...
Click to collapse
None of the above. The pen has its own sensor behind the screen. It got damaged somehow. Time for a warranty replacement.

do you have a case on the phone? any magnetic closure will cause exactly this

WaxysDargle said:
do you have a case on the phone? any magnetic closure will cause exactly this
Click to expand...
Click to collapse
Correct, I suspected it and removed the case and it solved the problem.
I recently bought https://www.aliexpress.com/item/Zim...lloy-Metal-Cover-for-Samsung/32828780058.html
It's a fantastic case in every way, except that it makes Spen go crazy.
Will it cause any permanent damage or am I safe to continue using it?
Gizmoe said:
None of the above. The pen has its own sensor behind the screen. It got damaged somehow. Time for a warranty replacement.
Click to expand...
Click to collapse
It was the magnet messing around, the problem disappeared when I removed the case. Good thing I don't need to RMA this, I have 2-step verification for everything haha.

Nebell said:
It was the magnet messing around, the problem disappeared when I removed the case. Good thing I don't need to RMA this, I have 2-step verification for everything haha.
Click to expand...
Click to collapse
Glad it was easy!:good: I'm surprised a case would be made that interferes with the pen coils. That's annoying. Good thing it didn't permanently damage it. Having to RMA would have been lame. What case did you buy, I'm just curious.

Nebell said:
Correct, I suspected it and removed the case and it solved the problem.
I recently bought https://www.aliexpress.com/item/Zim...lloy-Metal-Cover-for-Samsung/32828780058.html
It's a fantastic case in every way, except that it makes Spen go crazy.
Will it cause any permanent damage or am I safe to continue using it?
It was the magnet messing around, the problem disappeared when I removed the case. Good thing I don't need to RMA this, I have 2-step verification for everything haha.
Click to expand...
Click to collapse
I think it can damage over time. I remember similar reports on the Note 4 forum, but maybe something changed since then too.

It's a mystery to me, how some people still don't know that magnets and phones don't go along ?
Sent from my Galaxy Note8 using XDA Labs

Gizmoe said:
Glad it was easy!:good: I'm surprised a case would be made that interferes with the pen coils. That's annoying. Good thing it didn't permanently damage it. Having to RMA would have been lame. What case did you buy, I'm just curious.
Click to expand...
Click to collapse
I posted a link in my reply above yours

Dejan Sathanas said:
It's a mystery to me, how some people still don't know that magnets and phones don't go along ?
Sent from my Galaxy Note8 using XDA Labs
Click to expand...
Click to collapse
The phone works fine, it's only the Spen which is not working well.
Besides, there are already magnets in phone speakers.

sefrcoko said:
I think it can damage over time. I remember similar reports on the Note 4 forum, but maybe something changed since then too.
Click to expand...
Click to collapse
I've read that magnets won't damage the phone, unless it's a really strong magnet like a MRI scanner. I won't be coming near any of those anytime soon.
The only thing that would be temporarily affected is the compass, which I don't use, and Spen in this case, which I use rarely.

Nebell said:
I posted a link in my reply above yours
Click to expand...
Click to collapse
Doh! Just breezed right over that. That's a pretty crazy case.

just about every folding case on amazon has a magnet in it that will affect the spen usage.
just a warning to everyone.

Yep even a small magnet for the latch causes mine to curve away.
Sent from my SM-N950U using Tapatalk

Plastic interfering or scrolling issues?

The p20 pro is delivered with a screen protector. On top of this is also an extra layer of plastic with a red tab at the top, meant to be removed before using the phone. I have to leave this second plastic layer on the phone to be allowed to return it.
Scrolling isn't good on the device. It's like the phone hold off scrolling until I've moved my finger some distance in a direction. This causes scrolling to be unsmooth and I'm not sure if it is due to the extra plastic layer interfering with touch sensitivity or if I have a faulty device or even worse: this is the way it is.
See video below for illustration. Notice how scrolling won't move right away with the finger. How are your phones with this? I hope that it's just the plastic but I'd rather not risking it to rip it off and find the issue remaining and no return.
Comparing on my current phone, a note 8, scrolling follows the finger right away.
Link to clip: https://www.youtube.com/watch?v=gzek18SlFY0&feature=youtu.be (above embedding didn't work for some reason)

It's not the plastic protector that's causing it. I have removed it and mine is exactly the same.

It's not the plastic protector that's causing it. I have removed it and mine is exactly the same.
Click to expand...
Click to collapse
Sad to hear it. It makes the scrolling experience feel like something from the entry level. I really wanted to like this phone but it seems the camera is all that's going for it in my book.

TigerSoul925 said:
Sad to hear it. It makes the scrolling experience feel like something from the entry level. I really wanted to like this phone but it seems the camera is all that's going for it in my book.
Click to expand...
Click to collapse
Seems to be a Huawei thing. I've had the same on a Honor 9 but it was much worse as it made it impossible to use it like I use my phones normally. It doesn't bother me too much on this one even though I notice it. On the Honor 9 it was hardware fault or just a bad digitizer because I had another Honor 9 too which was just fine and instant in the scrolling. It might be the digitizer this time around too. If I enable "show touches" under developer options it just doesn't trace the finger when doing smaller movements.

dannejanne said:
Seems to be a Huawei thing. I've had the same on a Honor 9 but it was much worse as it made it impossible to use it like I use my phones normally. It doesn't bother me too much on this one even though I notice it. On the Honor 9 it was hardware fault or just a bad digitizer because I had another Honor 9 too which was just fine and instant in the scrolling. It might be the digitizer this time around too. If I enable "show touches" under developer options it just doesn't trace the finger when doing smaller movements.
Click to expand...
Click to collapse
Same thigh here. It behaves the same way when showing touches so something tells me this may not be software but it's hard to tell. Seems some do not have the problem but I kind of get the feeling that non power users may not even notice it. I'm just the kind of person taking note of things like that this and it ruins the entire experience.
Add the horrible oversized ui to this and a few of the other kinks and suddenly all this phone seem to offer is a great camera and a lovely placed fingerprint sensor.

This seems to be the same issue as we are having in this thread.
Here is a video of the issue that I made. Note this is without the plastic interface OP was mentioning.

Mixy said:
This seems to be the same issue as we are having in this thread.
Here is a video of the issue that I made. Note this is without the plastic interface OP was mentioning.
Click to expand...
Click to collapse
It's the same issue, no doubt!

[SOLUTION] SPen drawing in >specific< portions of the screen >without< touching.

[SOLUTION] SPen drawing in >specific< portions of the screen >without< touching.
Anybody had this problem? If yes, you did you solve this ?
Really annoying and Samsung just thinks I'm idiot telling me to do things like:
- Change the tips
- Hard Reset
[Solution]
Since nobody gave a damn and I searched REALLY HARD for a solution. I will take one step forward and help anyone who maybe will have this problem in the future.
What you will need:
- Glue ( I recommend a Glue Stick, since it fixes good and can be easily removed.)
- Aluminum Foil
- Scissor
You will have to crop a little rectangle and test in which height of your SPen the foil will stop the problem.
In mine happened this way:
too close to the tip and the pen won't be detected
Too far from the tip and the problem remains.
In this position all functions work as intended. See photo.
Hit thanks if I helped you!
I did not want to use warranty because I will hate to wait weeks without a cellphone.
You can paint the foil for aesthetics purposes as I will manage to do better than I did
The cropped foil can be in the minimum size you achieve to make it work. Foil is very thin so there is no problems in inputting and removing from the slot.
[UPDATE] [UPDATE] [UPDATE] [UPDATE] [UPDATE] [UPDATE] [UPDATE] [UPDATE] [UPDATE]
After several days I tried the pen without the foil stick and surprise ! It works as intended ! As I said eletromagnetism is tricky so you won't want the foil to be permanently glued to your pen.

TheReal V said:
Anybody had this problem? If yes, you did you solve this ?
Really annoying and Samsung just thinks I'm idiot telling me to do things like:
- Change the tips
- Hard Reset
Please Help !
Click to expand...
Click to collapse
Have you ever dropped the device?

Jammol said:
Have you ever dropped the device?
Click to expand...
Click to collapse
Yes , but nothing that would cause severe damage. I always use my case and the problem started quite spontaneously.
And I don't think a fall damage would cause this problems in a perfectly squared portion of the screen
> I can use airviewing( in this square) in a uncommon distance (closer) what is a oxymoron because I write without touching in higher distances (WTH)

TheReal V said:
Anybody had this problem? If yes, you did you solve this ?
Really annoying and Samsung just thinks I'm idiot telling me to do things like:
- Change the tips
- Hard Reset
[Solution]
Since nobody gave a damn and I searched REALLY HARD for a solution. I will take one step forward and help anyone who maybe will have this problem in the future.
What you will need:
- Glue ( I recommend a Glue Stick, since it fixes good and can be easily removed.)
- Aluminum Foil
- Scissor
You will have to crop a little rectangle and test in which height of your SPen the foil will stop the problem.
In mine happened this way:
too close to the tip and the pen won't be detected
Too far from the tip and the problem remains.
In this position all functions work as intended. See photo.
Hit thanks if I helped you!
I did not want to use warranty because I will hate to wait weeks without a cellphone.
You can paint the foil for aesthetics purposes as I will manage to do better than I did
The cropped foil can be in the minimum size you achieve to make it work. Foil is very thin so there is no problems in inputting and removing from the slot.
Click to expand...
Click to collapse
Please change the beginning of your solution section. Comes off very condescending and people do give a damn. Considering that I posted a question to you about it at 130am my time, and people probably just didn't have anything to say as they might not have an idea as to why the issue was happening, or didn't get a chance to browse the forum as yet.
Good hack either way with the aluminum foil. Does it cause any issues with charging the method of the pen? Have you used to pen to depletion and then see if it charges after?

Jammol said:
Please change the beginning of your solution section. Comes off very condescending and people do give a damn. Considering that I posted a question to you about it at 130am my time, and people probably just didn't have anything to say as they might not have an idea as to why the issue was happening, or didn't get a chance to browse the forum as yet.
Good hack either way with the aluminum foil. Does it cause any issues with charging the method of the pen? Have you used to pen to depletion and then see if it charges after?
Click to expand...
Click to collapse
Well, been using it for a few hours and I got no interference in bluetooth functions and neither in the recharging by induction. But what you said about recharging made me think that the smaller the foil crop... the better.

TheReal V said:
Well, been using it for a few hours and I got no interference in bluetooth functions and neither in the recharging by induction. But what you said about recharging made me think that the smaller the foil crop... the better.
Click to expand...
Click to collapse
Nice. Have you thought of moving the hack into the pen? That'll be awesome to do and aid with aesthetics. I haven't gone to the point of taking one apart but it's probably just some 3m glue being used to hold the unit together.

Jammol said:
Nice. Have you thought of moving the hack into the pen? That'll be awesome to do and aid with aesthetics. I haven't gone to the point of taking one apart but it's probably just some 3m glue being used to hold the unit together.
Click to expand...
Click to collapse
That is something to consider but I don't feel comfortable messing with the insides of SPen since it's so fragile and intend to be water resistant. Maybe if I had more knowledge about it's structure...
3M glue I can say is something you won't desire. I wouldn't stick something permanently in/on the Spen. Electromagnetism is kind of tricky so the solution today can be the problem tomorrow. So easy removal should be preferred.

I use Gnacad quite a bit and the best I've achieved so far is to put the floating icon in the trash can (long press it) that seems to tone down it's sensitivity but it is still sensitive to the temperature and wether the screen sensitivity setting is set to screen protector or not and of course if a screen protector is used which I no longer use (paid for the gorilla might as well enjoy it.!
Photo's[emoji2398] by Sully using SM-N960U or SM-870A

sullytrny said:
I use Gnacad quite a bit and the best I've achieved so far is to put the floating icon in the trash can (long press it) that seems to tone down it's sensitivity but it is still sensitive to the temperature and wether the screen sensitivity setting is set to screen protector or not and of course if a screen protector is used which I no longer use (paid for the gorilla might as well enjoy it.!
Photo's[emoji2398] by Sully using SM-N960U or SM-870A
Click to expand...
Click to collapse
YES ! I just think exactly the same about the Gorilla Glass. I'm not paying for this and covering with some cheaper glass protector. I just take good care of my screen and it looks amazing !
Did you have this same ''drawing'' problem? Excuse my ignorance but... What is Gnacad?