Hello
let me explain what happened to my device
It was on edl mode .. so i flashed with QPST file i found here , no luck first time so i deleted all partitions data using QFIL then flash again it works android 9 everything fine
I tried to update to 10 using user file and twrp it reboot in middle of the process
So i flashed with android 10 RAW file .. now its okay But wifi is not working
I went back to android 9 wifi is oky
Back to 10 wifi not : (
So i think its persist ? because it happened with me in Oneplus before
Is there a persist file from android 10
Or full TWRP back up 10 ?
Plz
Edit : I just flashed NON-HLOS.bin from QPST rom to modem in fastboot and wifi is oky now
You can delete the post Sir .
brsteej said:
Hello
let me explain what happened to my device
It was on edl mode .. so i flashed with QPST file i found here , no luck first time so i deleted all partitions data using QFIL then flash again it works android 9 everything fine
I tried to update to 10 using user file and twrp it reboot in middle of the process
So i flashed with android 10 RAW file .. now its okay But wifi is not working
I went back to android 9 wifi is oky
Back to 10 wifi not : (
So i think its persist ? because it happened with me in Oneplus before
Is there a persist file from android 10
Or full TWRP back up 10 ?
Plz
Edit : I just flashed NON-HLOS.bin from QPST rom to modem in fastboot and wifi is oky now
You can delete the post Sir .
Click to expand...
Click to collapse
Would you mind share non-hlos.bin file? Because I lost my wifi too. Thanks
xevex123 said:
Would you mind share non-hlos.bin file? Because I lost my wifi too. Thanks
Click to expand...
Click to collapse
Sure
Sorry just now i saw your replay
Fastboot flash modem NON-HLOS.bin
MediaFire
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Related
Try to install MIUI 10 Pie in my MIA2, I did all the steps well, even delete the Firmware Update files from the file, but when you pass it to the cell phone to install, pass the original and not the edited one, so install MIUI10 with the folder Firmware Update, which does not allow me to return to Android One, nor does MiFlash work, the cell phone works with MIUI without problems, but all the custom roms do not work, any solution? Or have I lost all hope with the AntiRollBack?:crying:
Check Antiroolback
Turn your phone to fasboot mode
Connect your Redmi Note 5 to PC with USB
Step Two
in PC go to C:\adb\
Push*shift*+ Right Click
select Open Command window here
In*CMD*write this
Quote:* ** ***fastboot devices
then write
Quote: fastboot getvar anti
Sent from my MI 6X using Tapatalk
balther said:
Try to install MIUI 10 Pie in my MIA2, I did all the steps well, even delete the Firmware Update files from the file, but when you pass it to the cell phone to install, pass the original and not the edited one, so install MIUI10 with the folder Firmware Update, which does not allow me to return to Android One, nor does MiFlash work, the cell phone works with MIUI without problems, but all the custom roms do not work, any solution? Or have I lost all hope with the AntiRollBack?:crying:
Click to expand...
Click to collapse
¿You tried to flash in edl mode the original rom?
martinpiriz said:
¿You tried to flash in edl mode the original rom?
Click to expand...
Click to collapse
Yes, but Mi Flash and Fastboot flash no work
GUYS Please help I'm Scared as hell, my K20 is stuck in fastboot mode and I don't know what to do! So here is what I did, I heard about the K20 Pro 81hz refresh rate Mod and the android 10, I couldn't find twrp for k20 so i decided to flash k20 pro's twrp (which probably was a big mistake!), I don't exactly remember what exact files i was flashing! I remember after flashing few files or just the twrp of k20 pro (i dont remember exactly) my phone was stuck in fastboot and is still now if i restart or go to recovery or anything it just leads me back to fastboot screen. I flashed android 10 recovery rom via fastboot,which i was not supposed to do, i didn't know the difference b/w the fastboot and recovery rom at that moment, but when i did i downloaded another rom but a stock rom for k20 fastboot variant I don't remember where I downloaded all the files but I downloaded the recovery rom from : https://www.xda-developers.com/download-miui-11-beta-now-for-13-xiaomi-devices-changelog/ and I downloaded the stock rom from : https://rootmygalaxy.net/redmi-k20-and-k20-pro-stock-firmware/ and I downloaded twrp recoveries from other sites, well I guess this is not important where i downloaded these. But after I try to flash the K20 Stock Rom by Mi Flash Tool (keep in mind i tried to flash the android 10 rom with mi flash tool also and that too by any all settings like clean all , keep data, clean all lock, i was just trying everything to get my phone to work! ) So then it gave me error of mismatching device so i searched on youtube to fix this error and tried it but still it wasn't flashing, then I thought maybe when I was trying to flash the android 10 rom many times I might have locked the boot loader, so i used the mi unlocker tool to see, i clicked on unlock it said it started the process, 3 step process of verifying device ,unlocking ,and done but it showed an error on the verifying device it said "can't get info, connect again ". This scares me have I locked the bootloader and now is there no way to unlock it or what??? I need your guys help please tell me what Rom I have to flash or what steps I have to take to get my phone working again! Please
I have a K20 Indian Variant, oh and yeah my bootloader was unlocked before I started to do all of this. I know what I have written might be confusing But PLEASE HELP ME!
Edit: and I also tried to flash the boot by getting boot image from android 10 rom, basically i just flashed randomly...
I also saw a few videos about the edl mode, i tried to get into edl mode and I got into edl mode so If there is a way to flash rom using edl mode do tell me
Edit: And I also think maybe the rom isn't flashing because I might have got the global rom or something can anyone send link to Indian K20 Stock Rom?
Edit: I just downloaded the k20 indian rom the correct one but when i flash through mi flash it says success in 1 second time that means my bootloader is locked but now ALL i need from YOU GUYS is to tell me How to Unlock it, I can't unlock it via Mi Unlock Tool, is there another method?
itzabhi said:
GUYS Please help I'm Scared as hell, my K20 is stuck in fastboot mode and I don't know what to do! So here is what I did, I heard about the K20 Pro 81hz refresh rate Mod and the android 10, I couldn't find twrp for k20 so i decided to flash k20 pro's twrp (which probably was a big mistake!), I don't exactly remember what exact files i was flashing! I remember after flashing few files or just the twrp of k20 pro (i dont remember exactly) my phone was stuck in fastboot and is still now if i restart or go to recovery or anything it just leads me back to fastboot screen. I flashed android 10 recovery rom via fastboot,which i was not supposed to do, i didn't know the difference b/w the fastboot and recovery rom at that moment, but when i did i downloaded another rom but a stock rom for k20 fastboot variant I don't remember where I downloaded all the files but I downloaded the recovery rom from : https://www.xda-developers.com/download-miui-11-beta-now-for-13-xiaomi-devices-changelog/ and I downloaded the stock rom from : https://rootmygalaxy.net/redmi-k20-and-k20-pro-stock-firmware/ and I downloaded twrp recoveries from other sites, well I guess this is not important where i downloaded these. But after I try to flash the K20 Stock Rom by Mi Flash Tool (keep in mind i tried to flash the android 10 rom with mi flash tool also and that too by any all settings like clean all , keep data, clean all lock, i was just trying everything to get my phone to work! ) So then it gave me error of mismatching device so i searched on youtube to fix this error and tried it but still it wasn't flashing, then I thought maybe when I was trying to flash the android 10 rom many times I might have locked the boot loader, so i used the mi unlocker tool to see, i clicked on unlock it said it started the process, 3 step process of verifying device ,unlocking ,and done but it showed an error on the verifying device it said "can't get info, connect again ". This scares me have I locked the bootloader and now is there no way to unlock it or what??? I need your guys help please tell me what Rom I have to flash or what steps I have to take to get my phone working again! Please
I have a K20 Indian Variant, oh and yeah my bootloader was unlocked before I started to do all of this. I know what I have written might be confusing But PLEASE HELP ME!
Edit: and I also tried to flash the boot by getting boot image from android 10 rom, basically i just flashed randomly...
I also saw a few videos about the edl mode, i tried to get into edl mode and I got into edl mode so If there is a way to flash rom using edl mode do tell me
Edit: And I also think maybe the rom isn't flashing because I might have got the global rom or something can anyone send link to Indian K20 Stock Rom?
Edit: I just downloaded the k20 indian rom the correct one but when i flash through mi flash it says success in 1 second time that means my bootloader is locked but now ALL i need from YOU GUYS is to tell me How to Unlock it, I can't unlock it via Mi Unlock Tool, is there another method?
Click to expand...
Click to collapse
I found the solution all i had to do is change the rom folder to C:// and it worked!
Its not working for me plz help me
itzabhi said:
I found the solution all i had to do is change the rom folder to C:// and it worked!
Click to expand...
Click to collapse
i dont know what is wrong but falsh is getting completed in 1 second.
roushancool said:
i dont know what is wrong but falsh is getting completed in 1 second.
Click to expand...
Click to collapse
Bro first of all u need to edit the flashall commands with the notepad and then u should put the rom folder on the desktop and put the mi flash tool on a separate folder also on the desktop if u want me to tell u what to edit just message me and i will tell u how ?
itzabhi said:
I found the solution all i had to do is change the rom folder to C:// and it worked!
Click to expand...
Click to collapse
Bro first of all put the rom in a folder on the desktop (one folder and the files in it ) (not folder inside a folder)
Next copy the flashtool folder to the desktop also
Next edit the flash_all.bat and remove the commands up and keep only commands that starts with (fastboot)
And save.
Then choose the folder and then flash and make sure u choose only (clean all) and not (clean all and lock) from below goodluck bro hope the picture will make you understand
Fastboot rom 060,061, 063 for Asus x00t
FASTBOOT+QFILL
Code:
[LEFT][COLOR="Red"]060 fastboot rom contain both fastboot files+qfill files[/COLOR]
[SIZE="4"][COLOR="Blue"]FASTBOOT METHOD[/COLOR][/SIZE][/LEFT]
(1) enter into fastboot mode-turn off your phone and press volume up and connect device with PC
(2) unzip file and double click flashallAFT.cmd
(3) wait for the process to end
[LEFT][SIZE="4"][COLOR="Blue"]QFILL METHOD[/COLOR][/SIZE][/LEFT]
[COLOR="Red"]although not adviced because you may lost your persist. use only if ur phone is completely dead or hard bricked[/COLOR]
(1) make sure phone is switched off- press volume up and down and connect ur device with PC. phone will turn on and quickly connect as diagmode(check in device manager in PC)
(2) select "prog_emmc_ufs_firehose_Sdm660_ddr.elf" in program path
(3) click on "load xml"
(4) select "rawprogram_unsparse TW for taiwan other than that use WW ; for NFC supported nfc one,for Non-NFC supported no_nfc ; and in all case scenario use no_fsg.
(5) click on download and wait to process to finish.
[LEFT][U][COLOR="Blue"] AFT+QFIL 060 Dec build (1.8gb) [/COLOR] [HIDE][/U]
[B]LINK GOOGLE-DRIVE[/B]
[B][URL="https://drive.google.com/open?id=1PH8K4JF9uIbisUDEwUWuXW98JvYmF1-5"]https://drive.google.com/open?id=1PH8K4JF9uIbisUDEwUWuXW98JvYmF1-5[/URL][/B]
[B]AFH-LINK[/B] [URL="https://www.androidfilehost.com/?fid=4349826312261716894"]https://www.androidfilehost.com/?fid=4349826312261716894[/URL][/HIDE]
[U][COLOR="Blue"]AFT+QFIL 060 Nov build ( 3.4gb)[/COLOR][/U]
[HIDE][URL="https://www.androidfilehost.com/?fid=4349826312261738150"]https://www.androidfilehost.com/?fid=4349826312261738150[/URL][/HIDE][/LEFT]
NEW PIE 061 FASTBOOT ROM
AFH link
https://androidfilehost.com/?fid=4349826312261744934
NEW PIE 063 FASTBOOT ROM
AFH linkhttps://www.androidfilehost.com/?fid=4349826312261777759
i accidently flash via qfil in a virgin device , now safety net error comes . please help me what can i do??????
Sumit Saroha said:
i accidently flash via qfil in a virgin device , now safety net error comes . please help me what can i do??????
Click to expand...
Click to collapse
u lost ur persist with qfill. already told in post with red font that only use qfill if ur device is dead or hard bricked.
if u have persist partition backup then use that or use my persist backup and restore it. go to my profile and search abour persist backup.
P53mutant said:
u lost ur persist with qfill. already told in post with red font that only use qfill if ur device is dead or hard bricked.
if u have persist partition backup then use that or use my persist backup and restore it. go to my profile and search abour persist backup.
Click to expand...
Click to collapse
bro please help me ! i'm not able to find persist backup , please give me bro
all things are safe like imei, bt address, wifi address , serial number ..
Using x00td (3gb) with custom recovery and custom rom.
Can I shift back to stock with fastboot method?
DinIslamJoy said:
Using x00td (3gb) with custom recovery and custom rom.
Can I shift back to stock with fastboot method?
Click to expand...
Click to collapse
yes you can.
Please Give me persist.img from firmware 063
Please Give me persist.img from firmware 063
I have problem with my sensor
Hello everyone ,
I am here to ask if anyone kind enough to send me a backup of their persist partition (tried flashing the stock one didn't fix my problem).
Mi 9T pro Global or India perisist partition please.
Thank you.
Download fastboot rom, extra it then flash to persist partition in twrp recovery
thaonct said:
Download fastboot rom, extra it then flash to persist partition in twrp recovery
Click to expand...
Click to collapse
There are some files that are missing from the fastbook persist image , I would like to flash one that comes from another device directly. please if you have a backup share it with me).
urbanmec said:
There are some files that are missing from the fastbook persist image , I would like to flash one that comes from another device directly. please if you have a backup share it with me).
Click to expand...
Click to collapse
Try steps with my solution
1 . flash rom via fastboot to android 9 ( 10.3.17) ( always CLEAN ALL, NEVER CLEAN AND LOCK)
2. update to newest version miui 12.0.5 via Updater on Miui setting
3. flash recovery TWRP wzsx150 -- > it can backup and restore persist image
4. Restore attach fille link : https://apaxfranklin-my.sharepoint....lGmdvP3fetGDkBB8LSFy5oAiYpwkLeTbNT2A?e=QUsFPy
5. Format data then install rom which you like . "I chose the xiaomi.eu 11.0.8 version because it's stable -> screen brightness is better than miui 12"
thaonct said:
Try steps with my solution
1 . flash rom via fastboot to android 9 ( 10.3.17) ( always CLEAN ALL, NEVER CLEAN AND LOCK)
2. update to newest version miui 12.0.5 via Updater on Miui setting
3. flash recovery TWRP wzsx150 -- > it can backup and restore persist image
4. Restore attach fille link : https://apaxfranklin-my.sharepoint....lGmdvP3fetGDkBB8LSFy5oAiYpwkLeTbNT2A?e=QUsFPy
5. Formart data then install rom which you like . "I chose the xiaomi.eu 11.0.8 version because it's stable -> screen brightness is better than miui 12"
Click to expand...
Click to collapse
Thank you my friend, however, the file is not public , can't be accessed (PM u my email may be share it direclty with me or authorise my email).
urbanmec said:
Thank you my friend, however, the file is not public , can't be accessed (PM u my email may be share it direclty with me or authorise my email).
Click to expand...
Click to collapse
Did you get the file?
ashye said:
Did you get the file?
Click to expand...
Click to collapse
yes thank you my friend all good now , even though your version is from a china edition K20 pro but I solved it , thank you
urbanmec said:
yes thank you my friend all good now , even though your version is from a china edition K20 pro but I solved it , thank you
Click to expand...
Click to collapse
how is your widevine?
c.junrel said:
how is your widevine?
Click to expand...
Click to collapse
Chinese Handset , no widevine.
urbanmec said:
yes thank you my friend all good now , even though your version is from a china edition K20 pro but I solved it , thank you
Click to expand...
Click to collapse
cann you send me the file?
my phone shows no IMEI and no sim card signal i wanna try to fix it with persist file
hellow everyone, sorry for my english. but i need your help !
yesterday i was trying to repair IMEI of my pixel 4xl. unlocked bootloader working on android 12.1
after restoring QCN of another same model. nothing happens so i reset ESP using TWRP commands found somewhere in forum ..
after that im unable to restore my modem.img or modemst1, st2. fsg. i have backup of all files but unable to flash using fastboot mode. it gives me error.
Remote user not allower to flash MODEM. etc..
the situation is. my wifi is not working and imei is crupted or blank.
i have tried android flash tool online and upgraded to Android 13 Developer 2.
but same results
i restored QCN using QFIL. but. nothing happens
is there another way to flash modem files? or any easy commands. thanku
Go to halabtech they've solution but paid.
rohailadnan said:
hellow everyone, sorry for my english. but i need your help !
yesterday i was trying to repair IMEI of my pixel 4xl. unlocked bootloader working on android 12.1
after restoring QCN of another same model. nothing happens so i reset ESP using TWRP commands found somewhere in forum ..
after that im unable to restore my modem.img or modemst1, st2. fsg. i have backup of all files but unable to flash using fastboot mode. it gives me error.
Remote user not allower to flash MODEM. etc..
the situation is. my wifi is not working and imei is crupted or blank.
i have tried android flash tool online and upgraded to Android 13 Developer 2.
but same results
i restored QCN using QFIL. but. nothing happens
is there another way to flash modem files? or any easy commands. thanku
Click to expand...
Click to collapse
can you pls share your efs backup or full backup i have no sim no service issue i will be grateful i corrupted the partitions so pls Here is that you can restore efs https://forum.xda-developers.com/t/tool-backup-restore-efs-imei-for-all-sgsiii.1901098/ and restore modems from qfil