My phone only boots in EDL mode
already tried this https://forum.xda-developers.com/t/repair-your-rog2-phone-with-edl-mode-official-firmware.4012175/ and im getting error in qfil unable to read packet header also tried miflash im getting the error set boot partition failed
was only using messenger when it froze and shuts down
Related
Hello,
I have a bricked HTC desire 626G dual sim I tried to flash a rom to fix it (it kept giving me a message saying no command and loading only android recovery mode ),
But it gave me an error so I changed the option to Format ALL+Download and the phone now doesn't even turn on not even to recovery mode or any sign of life
I tried to download all roms but It gives me an error message saying:
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(0x138BE)
[EMI] Obtain DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.
Hai, view days ago i got bricked my phone, after i got replacement from distributor service center, this incident was started while my cell phone always hang randomly, then the bad things happened, my phone is no longer boot up, can't access twrp too,
I tried many trick to make my cell phone wake up but nothing happens,
I tried to flash with miflash (fastboot) with option clean all or clean and lock, it says error remote erase/write partition failed
I tried to flash with QFIL Download Qualcomm Flash Image Loader failed
Can't flash with command fastboot, all write failed
I tried with oem edl got error ACK Count don't match
I tried deep cable flash failed
I tried the last option with test point also failed
all also write/erase failed,
what i supposed to do to fix my phone
did you solve the problem? I guess i had the same...
My Oneplus 3T(with android 8.0.0) suddenly turn off and it wouldn't boot or other option, i didn't ever rooted, it was new and updated. I tried to go to recovery, tried a hard boot hold the power button for 30s, connected to pc, and giving a charge... it just stayed dead... so i did a find the OnePlus3 Unbrick Tool, did find the phone on the tool and i run... after that it boot in a cycle where appear the 1+ logo and them the md5 checksum with the system and recovery failedmd5 failed
it does that loop, and now i can enter fastboot but can do nothing than going to that cycle and power off
phone apear in the device manager as "Qualcomm HS-USB QDLoader 9008(COM3)"
and using the tool again, goes to a error saying "Sahara Communication Failed£ Please try again after power off phone" and already tried what it said..
then i tried the version 3.0.8 of msm-download-tool and got the error "Firehose GetUfsInfo Failed" and got the LED yellow...
please help me, what can i do to boot my devide?
Maveric2 said:
My Oneplus 3T(with android 8.0.0) suddenly turn off and it wouldn't boot or other option, i didn't ever rooted, it was new and updated. I tried to go to recovery, tried a hard boot hold the power button for 30s, connected to pc, and giving a charge... it just stayed dead... so i did a find the OnePlus3 Unbrick Tool, did find the phone on the tool and i run... after that it boot in a cycle where appear the 1+ logo and them the md5 checksum with the system and recovery failedmd5 failed
it does that loop, and now i can enter fastboot but can do nothing than going to that cycle and power off
phone apear in the device manager as "Qualcomm HS-USB QDLoader 9008(COM3)"
and using the tool again, goes to a error saying "Sahara Communication Failed£ Please try again after power off phone" and already tried what it said..
then i tried the version 3.0.8 of msm-download-tool and got the error "Firehose GetUfsInfo Failed" and got the LED yellow...
please help me, what can i do to boot my devide?
Click to expand...
Click to collapse
When comes error "Sahara Communication Failed" after that hold and press volume up with power button simultaneously , it will start again. Hope it should work.
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
I ve little same issue. need help too.
I have Mi A2 runnig on android8.1
but it didnt update 9.0
so I try with twrp but fail no boot anymore.
I use miFlash tool. accdently I locked phone. flashed rom didnt boot.
now I ve just fastboot mode. or open 'android one' screen and then goes black.
I try EDL mode by test point inside phone.
flash with 2018 mi Flash tool but stuck in flashing...
flash with 2016 mi Flash tool write succesful flashed afte 6min. but not boot.
I read 2 days on forums. cant find anything to do.
is there any solution?
thanks
Hi, has anyone made any progress?
Theduardds said:
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
Click to expand...
Click to collapse
A year ago i had the same issue kinda. The only thing that worked for me was flashing mi 6x stock rom and after some trial an error it flashed and it fixed. The only problem is i have a mi 6x forever. Basically download mi 6x stock rom. Try that mi flash tool and keep hard rebooting and click flash button right after it vibrates. If lucky sometime will work and flash. If nothing try older versions of mi flash tool. Good luck.
all of you have the same problem ... you bootloop into edl mode because you have ARB4 triggered ..that means the only stock you can flash in miflash is ARB4 rom ( latest most up to date )
you also need patched programmer file since flashing ARB4 requires miui account
the fix to this problem is documented everywhere and explained lots of times ...just read ..follow this guide and one-click tool to unbrick
next time read ......a little ..
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
I have my friends Xiaomi mi 8. It keeps freezing on the miui screen when booting up. It simply won't boot up. The bootloader is locked and I've tried everything. I've tried flashing new firmware via fastboot I've tried flashing twrp and orange fox I've even tried tried flashing pixel experience but the bootloader doesn't allow it. I've downloaded the XiaoMitool v2 and mi flash tool but nothing is working. When I boot to recovery and try to wipe data it just gives an error saying it's failed. I tried using the edl boot bat file and when it reboots to edl it just restarts and freezes on miui. ive tried edl from the back pins on the phone but the computer isnt recognising it and ive got the qualcom drivers installed but still no luck. Also when I try flashing miui fastboot firmware the program gives an error saying something about the flash script. Is there anything I can do to fix it or to atleast unlock the bootloader remotely without the need of the phone being turned on? ive heard of the msm tool but i coulnt find anything for the mi 8 only oneplus. Any help is appreciated thanks!