Hi guys,
I bought broken huawei P10 VTR-L29 described as no turning on.When i connect phone to computer it shows as HUAWEI USB COM 1.0.So i searched and i found board software to this model and i flashed software by IDT.On my suprise phone powered on to some kind of developer software.Next i was trying to install official software using HWOTA and i have problem.The problem is when twrp is flashed by script i'm turning off phone and i'm trying boot to TWRP using vol+ and power.But unfortunately phone goes black and keep restarting.Do you have any suggestions for me what can be wrong ? i was trying flashing diffrent twrp versions but nothing changed
I have unlocked bootloader and good battery
Related
hey guys i have a hardbricked mi5 no fast boot or charging if i connect to the computer it says unknown usb device.how to fix my device any ideas.
Try to find and install drivers for qualcomm hs-usb qdloader 9008.
if you hardbrick your pc prob detect your phone as Qualcomm hs-usb qloader 9008 . Just install any MIUI rom use MiFlashTool . you can find tutorial in MIUI forum . Because i got hardbrick last week . and my phone work again after install MIUI rom .
How to solve it
gowtham300 said:
hey guys i have a hardbricked mi5 no fast boot or charging if i connect to the computer it says unknown usb device.how to fix my device any ideas.
Click to expand...
Click to collapse
I know it's been a long while since you had this problem, but as I have to face it myself without any clue how to solve it I thought it was a good idea to recover this thread.
First of all, let me say it happened to me with a Xiaomi mi5s. I had already installed adb & fastboot, as well as Xiaomi drivers from the Xiaomi Unlock Tool.
The problem arose when I made a partial firmware upgrade through fastboot in order to install LOS 14.1 via TWRP. I could not geet into fastboot mode, the screen went completely black and no charging LED. Curiously my laptop (Win10) made a tiny nose everytime I pluged or unplugged it (the same one it does everytime you plug a new device) and saw that it recognised it as a 'Qualcomm HS-USB qloader 9008'. More curiously, Xiaomi Flash Tool (BTW, it was the beta version although I guess the latest version would have worked as well) recognised the device although everytime I tried to flash an official firmware I got a message error: 'cannot receive hello packet'.
Well, after some research I was scared because I didn't want to open the phone to unplug the battery or anything. But I read somewhere that someone had the same problem as me and that he tried Xiaomi Flash Tool until it worked.
That was it, that was the clue. Xiaomi Flash Tool ready, having initially recognised my mi5s, the phone connected to the laptop, I made the combination to get into fastboot (holding volume - & power button) until my laptop made a tiny nose (the same one I explained at the beginning). As soon as I heard it I left the phone and clicked on the flash button on Xiaomi Flash Tool. Yes, it worked out. I installed latest development chinese MIUI rom. From there, I got into fastboot, flashed a new recovery... Well that's another history, the fact is that the mi5s is working again and I must say I feel really relived.
If anyone encounters the same problem I had I hope this post is of any help to him/her.
21prods said:
I know it's been a long while since you had this problem, but as I have to face it myself without any clue how to solve it I thought it was a good idea to recover this thread.
First of all, let me say it happened to me with a Xiaomi mi5s. I had already installed adb & fastboot, as well as Xiaomi drivers from the Xiaomi Unlock Tool.
The problem arose when I made a partial firmware upgrade through fastboot in order to install LOS 14.1 via TWRP. I could not geet into fastboot mode, the screen went completely black and no charging LED. Curiously my laptop (Win10) made a tiny nose everytime I pluged or unplugged it (the same one it does everytime you plug a new device) and saw that it recognised it as a 'Qualcomm HS-USB qloader 9008'. More curiously, Xiaomi Flash Tool (BTW, it was the beta version although I guess the latest version would have worked as well) recognised the device although everytime I tried to flash an official firmware I got a message error: 'cannot receive hello packet'.
Well, after some research I was scared because I didn't want to open the phone to unplug the battery or anything. But I read somewhere that someone had the same problem as me and that he tried Xiaomi Flash Tool until it worked.
That was it, that was the clue. Xiaomi Flash Tool ready, having initially recognised my mi5s, the phone connected to the laptop, I made the combination to get into fastboot (holding volume - & power button) until my laptop made a tiny nose (the same one I explained at the beginning). As soon as I heard it I left the phone and clicked on the flash button on Xiaomi Flash Tool. Yes, it worked out. I installed latest development chinese MIUI rom. From there, I got into fastboot, flashed a new recovery... Well that's another history, the fact is that the mi5s is working again and I must say I feel really relived.
If anyone encounters the same problem I had I hope this post is of any help to him/her.
Click to expand...
Click to collapse
fixed long time ago , but i appreciate your help and you taking time to do this for me
You are welcome. I was afraid I wouldn't be of much help to you but I thought that it was a good idea anyway to leave my experience just in case at some point it proves helpful to someone.
I buy this phone from Tinydeal and come some custom rom with out ota update. I use sdfuse to update but something goes wrong. Now its stuck ZUK logo
Be for update i forget to setup phone usb debuggin mode. Can some one help me ?
this is a common problem and it was discussed here several times, just search for it. you need to flash a full qfil rom with the qualcomm flashing tool and there are howto's here and on zukfans*eu
I dit but no luck..
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
darf10 said:
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
Click to expand...
Click to collapse
Hi,reboot your computer or change USB port.
Inviato dal mio ZUK Z2121 utilizzando Tapatalk
I'm having problems with Qfil ...
It is giving the following error: "download fail: FireHose Fail FHLoader Fail: Process fail"
Any answers to what might be?
darf10 said:
Hello, I was trying to update my zuk z2 pro to the version of the AEX 5.0 rom but at the installation it gave some error and my cell was blocked nothing happens, I already tried to install the rom by Qfil but it gave Sahara error and now the computer is no longer recognizing on port 9008
Someone has an idea to help me, please.
Click to expand...
Click to collapse
Is not your version of the recovery is wrong, what version of recovery you are using?
Hi
I have also bricked my Zuk Z2 pro after trying to update the Radio Modem !!!
Now when i try to start it, i only have the Zuk logo 1 seconde and after that he shut done and reboot. he do that 5 times and after the screen stay off and i only have the led who are on (blue or red).
When i plug the Z2 to my laptop, i can see that something is connected : qualcomm 9008 something but i can't do anything...
I have try to use adb, QFIl etc... nothing....
Any idea ???
Qfil is tricky, you must setup it first and start flashing as soon as phone connects. If you let phone in EDL mode for more than few seconds than port closes (even if it says its open). I have spent half a day with that issue.....
bricked Zuk Z2 Pro
Hello, i am new here and i have a big problem with my new Zuk Z2 Pro. I have unlocked the bootloader, installed TWRP (twrp-3.2.1-0-z2_row.img) the right way (with -i 0x2b4c in it if i am right) trough windows commands. After that i flashed a Mokee rom. Al was working well. After a week i wrote about a new version of ZUI and i flashed it. Now my Zuk is bricked. The phone will start up and then freezes in the beginning when i have to set the phone. I can get it in the menu with fastboot, recovery etc, but recovery is gone. I tried to flash a stock rom with QFIL, but my pc does not recognize my phone anymore. I don't get port 9008 and can not install TWRP anymore (waiting for device). I wrote many threads and it seems the problem is the driver. But i did install the driver (at least i think i did), and all the other needed stuff.
I know it can be fixed, but i am out of solutions. Can anyone help me out please? I hope this is the right thread to ask you, but when it's not, please guide me.
Also tried to flash the device with Mi Flash, but also the device is not recognized in this tool. At the beginning it was, but now it's not anymore.
Someone know the solution to get the phone recognized by pc and get the needed port 9008?
Do i have to use the testpoint method? Hope not, because i will have to open up the phone.
Waiting for help, thank you.
Alex
Hi everyone,
I got an P20 PRO Build: CLT-L29 9.0.0.159(C33E3R1P9) that as the following issues:
-FRP Locked
-Can't get into FASTBOOT mode (i press VOLUME DOWN, and i plug into computer and it just starts charging.
- I tried to Upgrade /Downgrade the firmware using OTG cable by dialing *#*#2846579#*#*
no sucess, i tried other fw packages to make sure...
-The i tried to use the Firmware Finder method, changing the router DCHP DNS, without any sucess aswell...
I don't know what to do, i really need some help :/
Have you try to downgrade in HiSuite?
masze said:
Have you try to downgrade in HiSuite?
Click to expand...
Click to collapse
Hey mate, well I think that I would need to get the phone into FASTBOOT mode, correct?
Somehow I can’t get the phone into that mode, I tried everything.
No, just connect your phone with hisuite on pc.
Possible can you downgrade there.
I can downgrade from 9 to 8 in hisuite
Hello all.
I recently Rediscovered my P20 Pro/CLT-l09(c432)f and decided to try and flash a newer rom to it since for some reaoson it wasnt getting an update.
I used FirmFinder and HiSuiteProxy which didn't give me any warning. I set the rom 10.0.0.201 i think and flashed without errors, but then on boot it started showing the message attached bellow. The problem is that it wont boot and i've tried using erecovery and everything. It can connect in fastboot mode but it wont accept any flashing. I believe the reason for that is that usb debugging isn't enabled and there is no way to do so as far as i've found.
I've tried the vol up+ power button menu where it gives the option to restore trough usb and otg but it always fails. I dont know if its becuse the rom i've downloaded isn't correctly placed inside the flash, but from i vid i found where i followed it should be.
Any help would be appriciated.