Related
How to enable Phone Book Access Profile (PBAP) on ATT Tilt?
I need to transfer phone book to accord bluetooth & it need to enable PBAP on phone.
Thanks in advance & helping out..
I am only aware of this application: http://www.jetwaremobile.com/
If there exists another alternativ, feel free to post it.
TDO
TDO said:
I am only aware of this application: http://www.jetwaremobile.com/
If there exists another alternativ, feel free to post it.
TDO
Click to expand...
Click to collapse
I've done some research on this and I beleive that is the only app that works.
Thanks guys, I will try it today & update you whether it sync. the phone book with Honda Accord Hands free link or not?
Thanks again!
abhiku said:
Thanks guys, I will try it today & update you whether it sync. the phone book with Honda Accord Hands free link or not?
Thanks again!
Click to expand...
Click to collapse
I'm not sure I understand your question??????
MorKaiser said:
I'm not sure I understand your question??????
Click to expand...
Click to collapse
I was trying to import phone book from ATT Tilt to Honda Accord Hands free link (that is built in Bluetooth that comes with car).
I just tried this software & it says the same error "The phonebook can't be sync. Pls. check the device"
abhiku said:
I was trying to import phone book from ATT Tilt to Honda Accord Hands free link (that is built in Bluetooth that comes with car).
I just tried this software & it says the same error "The phonebook can't be sync. Pls. check the device"
Click to expand...
Click to collapse
Did you send your contacts via the software on your device? If so, I'm outta ideas, sorry couldn't help more...
MorKaiser said:
Did you send your contacts via the software on your device? If so, I'm outta ideas, sorry couldn't help more...
Click to expand...
Click to collapse
Yes, I did. Initiate send from the software on phone & I got this error.
“Unable to transfer Contacts. Make sure that the Bluetooth device is set to receive contacts”.
abhiku said:
Yes, I did. Initiate send from the software on phone & I got this error.
“Unable to transfer Contacts. Make sure that the Bluetooth device is set to receive contacts”.
Click to expand...
Click to collapse
I have a Pioneer AvidD3 so I'm not sure exactly how hoda's system works... but with my system, i had to make sure it was in "phonebook transfer mode" before I could send my contcts; otherwise I got the same error.
hope this helps!
Success
I was able to import my entire Tilt phonebook into the Navi system on my MDX. From there, I can transfer any entry to the Handsfree link or just place the call from the Navi system.
rlwva said:
I was able to import my entire Tilt phonebook into the Navi system on my MDX. From there, I can transfer any entry to the Handsfree link or just place the call from the Navi system.
Click to expand...
Click to collapse
Are your entries on your sim card (just the phone number) or in the main phonebook memory (can you see the whole contact info including address and multiple phone numbers)? The reason I ask is the impression I had is the contacts sent over could only be the simple kind with just the name and 1 number.
I hope you have the numbers in main phonebook memory as I would love to get this working in my TL.
Also, did you use the jetware software? If so, would you mind letting us know in detail what you did as I'm still unsucessful.
Doesn't SAPsettings do this? I have it on my vario III and the phonebook downloads to my car (VW bluetooth kit) OK.
jontelfer said:
Doesn't SAPsettings do this? I have it on my vario III and the phonebook downloads to my car (VW bluetooth kit) OK.
Click to expand...
Click to collapse
SAP settings would only enable you to access phonebook enterys that are on the sim card. I want to be able to get the actual outlook contacts. Just wondering if that is possible.
Oh, well I have no contacts on my SIM and my car display shows all my outlook contacts. Maybe it's accessing them through a different route. It just worked out of the box for me.
I have a Verizon XV6800 and a Acura TL and I have been trying to figure this out also. I have tried using the Jetware program but didnt get any where with it.
Please, if you figure this out PM me or shot me a email at [email protected] and let me know how you did it.
Thanks
Bud
abhiku said:
How to enable Phone Book Access Profile (PBAP) on ATT Tilt?
I need to transfer phone book to accord bluetooth & it need to enable PBAP on phone.
Thanks in advance & helping out..
Click to expand...
Click to collapse
Hi
Did you use the jetware program? Did you some how set the nav on your MDX in some kind of "phonebook transfer mode"? If so what did you do on the Acura Nav to do this?
Thanks
Bud
jontelfer said:
Oh, well I have no contacts on my SIM and my car display shows all my outlook contacts. Maybe it's accessing them through a different route. It just worked out of the box for me.
Click to expand...
Click to collapse
I tried again today both with and without the Jetware bluetooth extension. Tried multiple settings... no luck. Everytime I press phonebook import, it says the currently linked phone does not support this function. Any one with any suggestions?
(I have the AT&T Tilt and a 2007 Acura TL with Nav)
Do you have SAPSettings in settings->system?
If not, maybe find a cab for it and give it a go. Sounds like you've hit a brick wall anyway.
Aside from that maybe it's a difference at the car end. Mine is a SEAT (don't think they're sold in the US but think VW) and works out of the box.
Jon
help me out
rlwva said:
I was able to import my entire Tilt phonebook into the Navi system on my MDX. From there, I can transfer any entry to the Handsfree link or just place the call from the Navi system.
Click to expand...
Click to collapse
I have acura TL nav. I was unable to import phonebook from my sprint touch to TL.
can you tell me how you did on MDX?
thanks
nianmo
MorKaiser said:
I have a Pioneer AvidD3 so I'm not sure exactly how hoda's system works... but with my system, i had to make sure it was in "phonebook transfer mode" before I could send my contcts; otherwise I got the same error.
hope this helps!
Click to expand...
Click to collapse
I have a Pioneer deck as well and I have been looking for a way to do this. I didn't think it was possible. Should have known better! Going to try it out later tonight!
Ok, i did search over the forum, found some posts on this problem. But no solution, or i couldn't get the solution.
So, the question: everytime i click the bluetooth on at the comm manager, the "Making devices visible" will not checked at other people not able to send files to me. I need to manually go to bluetooth settings to enable it. It looks tedious every time i need to do double job by enable the bluetooth at comm manager and go to bluetooth setting to check "making devices visible".
Any tweak on this?
Ok. Found the solution by myself.
At blurtooth setting, click the timeout tab. Change Turn off visible mode to "never".
Try on bluetooth and check Make device visible again. It should work on your next bluetooth turn on.
Sorry for asking a dumb question.
upm15 said:
Ok. Found the solution by myself.
At blurtooth setting, click the timeout tab. Change Turn off visible mode to "never".
Try on bluetooth and check Make device visible again. It should work on your next bluetooth turn on.
Sorry for asking a dumb question.
Click to expand...
Click to collapse
This works until the next time you soft reset the device. Do you think there is a registry key that makes it permanent?
Nickgr said:
This works until the next time you soft reset the device. Do you think there is a registry key that makes it permanent?
Click to expand...
Click to collapse
I'm fine with Persian Blue, you can find it here:
http://forum.xda-developers.com/showthread.php?t=494333
Ciao, Andrea
This software lets you use the keyboard on your Fuze/Touch Pro as a wireless keyboard and the touchscreen as a Touch Pad Mouse like the kind on a laptop. Unfortunately this software is not free but they do have a trial version that you can try and the only limitation is it forces you to reconnect after every 30 clicks. This program can use either WIFI or Bluetooth to connect to your computer and pretty much lets you do anything from controlling Vista Media Center and Winamp to controlling your computer as long as you can write a script.
The software is called Salling Clicker
http://www.salling.com/
The program uses scripts that people create and post on the forum. I wrote this script a long time ago for my HTC Hermes to control my computer.
I don't know anything about programming or coding but I managed to write this script in about one night after reading a few basic tutorials and help from the forum members on Salling's forum. Since I put this together without any real knowledge this script is really basic but get the job done. If anyone wants to improve the script your welcome too, perhap you can smooth out the mouse movement and sensitivity even more.
Installation Instructions
1. Download and install the software on your PC
2. Pair up your phone with the computer by Bluetooth or use Wifi
3. Choose the correct phone from the drop down menu ( Touch Pro in this case) and it will begin to install the client software to your Phone.
4. Download my script and unrar into My Clicker Scripts located in My Documents
5. Open up the host software on your PC and drag the script called "HTC Universal Keyboard and Mouse" from the right box into the left box labeled "Items available on your handheld device".
6. Start up the program on your Fuze and establish a connection and choose the "HTC Universal Keyboard and Mouse" script to run
7.??????
8. Profit!
Thanks alot, i will definitely give this a try
Screw this, GRemote is the best and free, been around for a long time.
http://gbmsoftware.com/
Mr.Sir said:
Screw this, GRemote is the best and free, been around for a long time.
http://gbmsoftware.com/
Click to expand...
Click to collapse
dude thank you so freakin much this is AWSOME.
Mr.Sir said:
Screw this, GRemote is the best and free, been around for a long time.
http://gbmsoftware.com/
Click to expand...
Click to collapse
Anybody have this working on a Fuze? The only thing that will open is GMouse, and the only things that work inside it is the left click and moving the cursor but that only works if the left mouse click is held down making me highlight a bunch of stuff.
Mr.Sir said:
Screw this, GRemote is the best and free, been around for a long time.
http://gbmsoftware.com/
Click to expand...
Click to collapse
+1..
one of my favorite apps.
Not that i use it alot, but yea gremote is great. Using your phone for a steering wheel for racing games works great. Or if you got a decent set of speakers, you can change the songtrack or volume from the backyard while your planting your two-lips.
Reamer said:
Anybody have this working on a Fuze? The only thing that will open is GMouse, and the only things that work inside it is the left click and moving the cursor but that only works if the left mouse click is held down making me highlight a bunch of stuff.
Click to expand...
Click to collapse
I have the same problem... Anyone? PLEASE!!! I used to have this on my Kraiser and loved it.
People People
People there are So many Apps that Do this like ppc tablet/Total input/Vkb/on and on..lol
Nevermind. I got it
www.mobilesrc.com does the same without client software on the computer
also take a look on this thread: http://forum.xda-developers.com/showthread.php?t=425686&page=1
Is there any apps out there that can use the Keyboard via bluetooth to the PS3? I would love to be able to use the TP as a keyboard on the PS3.
wth nice
SSJ4Gokou said:
Is there any apps out there that can use the Keyboard via bluetooth to the PS3? I would love to be able to use the TP as a keyboard on the PS3.
Click to expand...
Click to collapse
Same here. I tried a Logitech wireless keyboard with touchpad that's specifically made to use with a PS3. The zoom feature was aweful when using the web browser, so I returned it.
There's a way to format the PS3's hard drive to either boot up like a normal PS3 or boot up like a Linux computer. I'm gonna check the PS3 forums to see if there's any info posted about using a WinMo device.
READ THIS:
BennY- said:
www.mobilesrc.com does the same without client software on the computer
also take a look on this thread: http://forum.xda-developers.com/showthread.php?t=425686&page=1
Click to expand...
Click to collapse
Same Problem
Reamer said:
Anybody have this working on a Fuze? The only thing that will open is GMouse, and the only things that work inside it is the left click and moving the cursor but that only works if the left mouse click is held down making me highlight a bunch of stuff.
Click to expand...
Click to collapse
I have the exact same problem on my fuze running energy rom 2.0. anybody get it working on a fuze?
thedocrn said:
Same here. I tried a Logitech wireless keyboard with touchpad that's specifically made to use with a PS3. The zoom feature was aweful when using the web browser, so I returned it.
There's a way to format the PS3's hard drive to either boot up like a normal PS3 or boot up like a Linux computer. I'm gonna check the PS3 forums to see if there's any info posted about using a WinMo device.
Click to expand...
Click to collapse
No2Chem has a tool that lets you use the they keyboard but with a usb cable heres a link
http://www.nuerom.com/BlogEngine/page/nueUSBKeyboard.aspx
Over at PPCGeeks they have posted a cooked cab that (I think) was 1st posted over here at XDA and then edited further. The graphics have been tweaked and what we have is a usable and fairly attractive VGA version. I did not make, edit or even tweak this app so my troubleshooting knowledge is limited. This will not work with every ROM but this cab works for me running ★ EnergyROM 'Genesis' (SYS 23016) Manila 2.1 - 9.20.09 WM 6.5 ★… and is fully functional!
Pandora Radio is your own FREE personalized radio now available to stream music on your Windows Mobile handset. Just start with the name of one of your favorite artists, songs or classical composers and Pandora will create a “station” that plays their music and more music like it. Pandora on Windows Mobile is fully integrated with Pandora on the web. Enjoy all your existing stations – and create new ones right from your Windows Mobile handset.
With Pandora you can explore this vast trove of music to your heart's content. Just drop the name of one of your favorite songs or artists into Pandora and let the Genome Project go. It will quickly scan its entire world of analyzed music, almost a century of popular recordings - new and old, well known and completely obscure - to find songs with interesting musical similarities to your choice. Then sit back and enjoy as it creates a listening experience full of current and soon-to-be favorite songs for you.
You can create up to 100 unique "stations." And you can even refine them. If it's not quite right you can tell it so and it will get better for you.
Updated 7/27
New cab posted! XDA member NRGZ28 was nice enough edit this cab so that it DOES add a shortcut to the start menu....thanks NRG!
Updated 9/29
New cab posted! XDA member bkress has made a cab that should help those who have the C++ Error, please see Post # 83 and and try downloading this cab at your own risk...thanks bkress!
ATTENTION EnergyROM Users
-->CLICK HERE<-- to download the exact same cab except it adds the shortcut to start/programs/multimedia for streamlined use with EnergyROMs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I try to install Pandora I get a C++ error!!!
This is typically caused by a some type of software that is conflicting with the installation. Member bkress has made a cab that should help those who have the C++ Error, please see Post # 83 and and try downloading this cab at your own risk
I installed Pandora but where is the shortcut?
Download the new version, Thanks to NRGZ28...this issue has been solved!! New cab posted 7/27 which does add a shortcut to the start menu.
Pandora installs fine but I get stuck at the "connecting" screen!!
Try logging on to your Pandora account on your computer (not your phone) and change your email address to a different one and then try you use the app on your phone. Also using the Advanced Configuration Tool try navigating to Network>TCP Window and change the value to 98304, Save your changes, and soft-reset.
Pandora in not showing up in my task manager?
How do I close Pandora?
This version like so many others will not show up in the task manager and will not close just by pressing the X button, you have to press menu (down on the circular pad) then select exit Pandora from the menu.
Once I have switched to another app how do I switch back to Pandora?
To switch back to the program simply click on the shortcut as if to launch it again and it will switch back to the app.
Do I need a subscription for this service?
No.
I have tried all this and it still will not work!!
It should be noted that this seems to be working for people running the newest EnergyROM by NRGZ28...you could always try flashing a different ROM. Before flashing any ROM make sure that you flash the correct one for your phone (i.e. GSM or CDMA) and follow all flashing procedures described in the Stickies and provided by the Chef.
Nice... Working better! Not perfect but better!!! Thanks for the link.
Does using this feature cost anything? I have unlimited data so I should be good right
Sparkz914 said:
Does using this feature cost anything? I have unlimited data so I should be good right
Click to expand...
Click to collapse
No subscription is needed w/ this version.
So I installed to my htc fuze running sheps wm 6.5 w/manila 2 but after I put in my info an click next it goes to the blue pandora screen with the spinning thing an stays there an doesnt work?!?!?! why's that?? anyone w/some input please??
Argh, neither one works for me....
krook6023 said:
If this is old news I apologize but I thought this warranted a new thread. I have been trying for a long time to find a working VGA version of Pandora that will work with Windows Mobile 6.5 and I finally found one. This cab works for me…fully functional…and the graphics have been edited to work on VGA.
Over at PPCGeeks they have posted a cooked cab that (I think) was 1st posted over here at XDA and then edited further to work correctly. I am on T-Mobile using EnergyROM 'Magic' (23003) TF3D2.
If you would like to give it a try you can download the cab here.
Click to expand...
Click to collapse
I'm having a problem regarding the 'vector subscript out of range line 756' error upon launching the application.
I've got the Sprint Touch Pro CDMA version running Groove Rom 5.0 with WinCE v5.2.21815.
Anyone else run into this issue?
I've tried two different versions of the Pandora VGA "hack" and both report back the same error.
Am I missing something?
Not sure about either of the two issues above...but it has been said that other software can effect the install of Pandora...I could never get it to work with Mobile Shell 3. Maybe try installing Pandora first after a clean flash and see if it works.
Nice, works great on my Fuze!
Even the screen taps work and stuff is in the right spot now.
My only complaint would be the Fonts are still Micro, but at least we have a fully functioning Pandora.
Thanks!
Also, I have attached the file here so people won't have to sign up for a PPCGeeks account just to download the file.
GldRush98 said:
Nice, works great on my Fuze!
Even the screen taps work and stuff is in the right spot now.
My only complaint would be the Fonts are still Micro, but at least we have a fully functioning Pandora.
Thanks!
Also, I have attached the file here so people won't have to sign up for a PPCGeeks account just to download the file.
Click to expand...
Click to collapse
Good idea, I updated the 1st post with the attachment.
MRFERRARI23 said:
So I installed to my htc fuze running sheps wm 6.5 w/manila 2 but after I put in my info an click next it goes to the blue pandora screen with the spinning thing an stays there an doesnt work?!?!?! why's that?? anyone w/some input please??
Click to expand...
Click to collapse
Same here. Even over Wifi.
Same here - stuck at "Connecting" after you enter the artist's name.
Same here - app gets stuck at "connecting" after you enter the artist's name.
CDMA Touch Pro with WM 6.5
Can't say mine does that, everything works well
MRFERRARI23 said:
So I installed to my htc fuze running sheps wm 6.5 w/manila 2 but after I put in my info an click next it goes to the blue pandora screen with the spinning thing an stays there an doesnt work?!?!?! why's that?? anyone w/some input please??
Click to expand...
Click to collapse
seivad17 said:
Same here. Even over Wifi.
Click to expand...
Click to collapse
mavblues said:
Same here - stuck at "Connecting" after you enter the artist's name.
Click to expand...
Click to collapse
I have heard this may work for fixing that...using advanced config navigate to Network>TCP Window and change the value to 98304, Save your changes, and soft-reset.
krook6023 said:
I have heard this may work for fixing that...using advanced config navigate to Network>TCP Window and change the value to 98304, Save your changes, and soft-reset.
Click to expand...
Click to collapse
...but having said that I was having the same problem but the cab in the OP alone fixed all the issues I was having.
Thanks! On my way out to the gym and my ipod is dead and can't find the charger... So this will be the first time i take my Fuze to the gym, wish me luck! haha
also I installed it to storage card and it didn't create a shortcut to my programs :/
Sign in worked, on my way out the door... lets see how this goes.
---update------
Everything worked out well.. Buttons on the bottom are a little off and the font in the menus is small but thats just cosmetic and doesn't bother me.
It took a little longer than expected to buffer between songs :/
Used about 55% of battery for 1.5hrs of streaming and maybe 5 min of internet browsing.
When i left the gym it said 45% remaining (left the house with a 100% charge). When i got home it said 27% remaining.. i live less than 3 min from my gym, soft reset the device and now it says 30% remaining :S ?
OH yah, also you can't exit the program just by pressing the X button, you have to press menu (down on the cirular pad) then select exit pandora from the menu.
fone_fanatic said:
...installed it to storage card and it didn't create a shortcut to my programs...also you can't exit the program just by pressing the X button, you have to press menu (down on the cirular pad) then select exit pandora from the menu.
Click to expand...
Click to collapse
Updated first post with this info...thanks!
krook6023 said:
I have heard this may work for fixing that...using advanced config navigate to Network>TCP Window and change the value to 98304, Save your changes, and soft-reset.
Click to expand...
Click to collapse
Yeah, I had already done that, but thanks for the suggestion. Any other ideas?
mavblues said:
Yeah, I had already done that, but thanks for the suggestion. Any other ideas?
Click to expand...
Click to collapse
What ROM are you running what is your service provider etc.??
Mine gives me a ton of errors...
Microsoft Visual C++ Debug Library
Debug Assertion Failed!
Program: \Program Files\Pandora\Pandora.exe
File: C:\Program Files\Microsoft Visual Studio 8\VC\ce\include\vector
Line: 756
Expression: vector subscript out of range
then after i press ignore it gives me the sme thing except
Line: 757
Expression: ("Standard C++ Libraries out of range", 0)
Then it crashes.
Hi folks,
just picked up a fuze and have one question, hopefully someone have the answer.
I use mortplayer to listen to podcasts and with my A2DP ready BT headset (jabra BT8010) I was able to control pause/play with my previous PDA However, w/ the fuze, when mortplayer is playing a file, and I click on the pause/play button on my jabra, it opens up windows media.
I would like for it to not open windows media player, but instead just control mortplayer (or whatever media application I'm using).
one side note though, it plays/pauses TCPMP perfectly fine, but just not mortplayer.
thanks.
its easier for me just to post this link..
http://www.skinzone.org/forum/viewtopic.php?f=3&t=266
rather than copy paste.
but this should fix your issue.
sorry that you need to register to download.
but reading the articles you can do without register.
Here, install this cab.
I had the same problem and I think jmckee gave this cab forever ago. This works perfectly for me. Just reset after install.
thanks, works but can't play/pause
thanks guys for the quick help. looks like this works as far as not bringing up WM player, but the play/pause function doesn't work anymore. hopefully it can be fixed down the lien.
thanks again!
did you try what i had mentioned?
it requires 2 apps
well my fix did
tcback
and avrcp
all mentioned in the thread i posted.
no, didn't see your 2 fixes
nhvoltagenh said:
did you try what i had mentioned?
it requires 2 apps
well my fix did
tcback
and avrcp
all mentioned in the thread i posted.
Click to expand...
Click to collapse
sorry, must have overlooked the fixes you mentioned. I only installed that BT fix so that WM isn't launched anymore.
I tried registering yesterday at that site but i think their registration app is broken or something as i didn't receive the confirmation email. will register with another email address tomorrow.
tnx.
ill go throught and activate all accounts.
this way you wont need to re-register.
can you activate?
nhvoltagenh said:
ill go throught and activate all accounts.
this way you wont need to re-register.
Click to expand...
Click to collapse
Hi there,
still didn't get any confirmation. can you activate my account? thanks.
account is active, simply log in