Hi,
Today I buy new fire stick 3rd gen , after putting stick on HDMI port , fire stick is updating after restarting boot logo is apper than after animation logo , tv screen is blank , I'll try all online solutions like restarting, hdmi port change , nothing is working, kindly help me on this
Related
Picked up a "non-working" HD 7". Thought it may be a file sytem issue, but I think it has a hardware issue. The screen will light but does not display any image on the LCD. I was able to get into bootloader mode and reflashed but have the same issue. I finally plugged into HDMI and found it working. Touch screen works, just no image on LCD? Searched forums but haven't found anyone with similar issue. I've reseated the cables for the screen. Worst case it will stay connected to TV....
Guys I just bought a used Kindle Fire HD 7" (not sure it it's the current version or the original KF HD as it has 32GB of storage space on it) that has some major issues.
It alternates between either not showing anything on the screen with the only indications that it is turned on being that it makes a noise when I disconnect it from the computer I have it connected to, and the kindle fire hard drive disappears, and intermittantly it displays a little over half of the screen, with a distinct grey overcast, with a 1 inch or so band of solid grey and the remainder of the screen displaying as black.
When I rotate the screen the messed up portion doesn't rotate with the screen. And putting it into fastboot mode with a factory cable shows the same behavior with the screen either not displaying at all or only displaying half of the fastboot screen.
Is this a screen issue or a defective motherboard?
I would like to fix it and use it but want to make sure I get the right parts before I try.
doctor_evil said:
Guys I just bought a used Kindle Fire HD 7" (not sure it it's the current version or the original KF HD as it has 32GB of storage space on it) that has some major issues.
It alternates between either not showing anything on the screen with the only indications that it is turned on being that it makes a noise when I disconnect it from the computer I have it connected to, and the kindle fire hard drive disappears, and intermittantly it displays a little over half of the screen, with a distinct grey overcast, with a 1 inch or so band of solid grey and the remainder of the screen displaying as black.
When I rotate the screen the messed up portion doesn't rotate with the screen. And putting it into fastboot mode with a factory cable shows the same behavior with the screen either not displaying at all or only displaying half of the fastboot screen.
Is this a screen issue or a defective motherboard?
I would like to fix it and use it but want to make sure I get the right parts before I try.
Click to expand...
Click to collapse
Well you can try a full factory restore but you may be looking at a hardware issue.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app
I did use fastboot to recover it back to factory but it didn't fix the issue unfortunately.
I bought a new screen and digitizer assembly (basically the whole front of the kindle fire HD minus only the plastic that is attached to it with glue), that once I get in I will replace the screen on my messed up one.
the replacement screen fixed the issue, sorry I hadn't responded to update the thread.
Figured I would post about my issue. I just bought a 2017 Hyundai Elantra. I tried connecting my Galaxy Note 2 to it using the USB cable provided with my phone. Once I run the App, the screen of the car shows nothing but fuzzy white snow (like the old analog TVs showed when there was no reception from the antenna), and then the snow pauses after a second. If I touch the car's screen, it reacts to my input by the snow moving again until I stop touching it.
I was first trying to connect with a CM12 Tesla build (Lollipop). I then flashed my phone with Resurrection Remix 5.6.4 (Marshmallow) and got the same thing. I've tried many tricks I've read from others who had blank screens (not snow, haven't seen anyone report that). I've also played with the Developer options, debug, HDCP and nothing made a difference. I did read that the phone has to be on MTP, but every time I plug it in it switches to USB Charge. If I select MTP after being connected, the screen on my phone refreshes itself (goes totally black for a half second) and goes back to USB charge and the car's stereo goes back to the home screen.
Anyone have any ideas on how to get it to work? Or do I need a new phone?
Same here, have you found any solutions?
Hi I replaced my cracked and non functional screen with a new one.
After I charged the device which did shoe me a charging scree the device wont boot into anything or it does and i have a black screen.
When i try to boot it I see the Android splash screen the a black screen.
After a few minutes the phone makes a sound and then after a few more it makes another sound but appears to be non responsive after that.
I was thinking of trying to load a new image but am not sure if that would work or not.
Anyone have any ideas?
Hello there,
So a friend of mine Just bring me a dead Huawei P20 Pro. So the Display is completely dead and only shows a Black screen , the Touchscreen only works on one third of the right side. USB-Debugging is disabled , HiSuite is not setup.
We tried to get the files via : HiSuite , adb commands and phone-to-phone connection (to an Galaxy s20 ultra).
My last hope was to try it out with an USB-C Hub , a keyboard&mouse combination and an HDMI output.
When i plug it in , my TV shows the Huawei Logo and then a lockscreen. If i press enter or click with the mouse the screen goes black immediately.
I also tried an OTG direct to the mouse and blindly find the pattern but without any results...
So does anyone Has any other option?
It is an Huawei P20 Pro with the newest Update and its locked via a pattern.
Gz and thank you Rig
hi, did you manage to solve this? i have the same problem with P30... same Huawei boot logo and grey lockscreen with clock, date & lock icon only...
same thing happens when i press space or enter (black screen) - i assume it requires a pattern unlock to be done, but i don't know how to do it because it's not visible (i guess you have to guess the position somehow )